mitch_de Posted June 1, 2017 Share Posted June 1, 2017 I dont know if its possible to run the chameleon.pkg installer from an install USB stick. The only way would be to run the Terminal before of the install process. cd / sudo /usr/sbin/installer -pkg /path/to/pkg.pkg -target / (- traget must be your /Volumes/xxxxx/ ) I dont know if that command above works also from the install USB stick ( su password ???) Link to comment Share on other sites More sharing options...
crazybirdy Posted June 7, 2017 Share Posted June 7, 2017 @crazybirdy: For some reasons I'm still using old MBR scheme, if you could share patched "OSInstall" framework binary for MBR under 10.13 is great appreciated. Thanks. I made the MBR patch yesterday. But we can't pass the OSInstall.mpkg error with MBR installer first. We can boot to the MBR installer language selection GUI, but still can't start the installer, so, I did not upload it. If you want to try it, here as attached with Enoch_2884 support 10.13 modified by myself. [deleted:OSInstaller(MBR)10.13.db1.17A264c_Enoch2884.zip] The 2884_boot with 10.13 kernel patcher works fine to boot MBR installer disk, and installed system disk(installed with clover 4082). The OSInstall.mpkg error kills the MBR installer. As I remembered, 10.12 has the same issue if I modify OSInstall.mpkg, so since 10.12, I only patched the OSInstaller for MBR, keep OSInstall.mpkg untouched in order to bypass the error. I think, maybe some framework is checking the OSInstall.mpkg, need to find it out, and patch it. But, I have no idea. [edit 2017.6.17] Finally, I found a way to install to MBR directly with stage2 automated disk which made by High Sierra beta Installer.app. Need more patch for OSInstaller, and need make Basesystem boot disk with MBR patch to load the stage2 automated disk with /macOS Install Data/ to finish the MBR installation. Will upload the new MBR patch with How-To to download section later, when I have free time. [edit 2017.6.18] upload new MBR patch to downlaod section with Enoch 2884. 3 Link to comment Share on other sites More sharing options...
LockDown Posted June 15, 2017 Share Posted June 15, 2017 How can we compile FileNVRAM? Source can be found in Mickey1979's github Link to comment Share on other sites More sharing options...
ErmaC Posted June 18, 2017 Author Share Posted June 18, 2017 TEST VERSION Edits and changes are courtesy of CrazyBirdy (High Sierra compatibility) --> REMOVED ErmaC 4 Link to comment Share on other sites More sharing options...
LockDown Posted June 19, 2017 Share Posted June 19, 2017 what changed? Link to comment Share on other sites More sharing options...
ErmaC Posted June 19, 2017 Author Share Posted June 19, 2017 what changed? http://forge.voodooprojects.org/p/chameleon/source/commit/2885/ ErmaC 1 Link to comment Share on other sites More sharing options...
mitch_de Posted June 19, 2017 Share Posted June 19, 2017 TEST VERSION Edits and changes are courtesy of CrazyBirdy (High Sierra compatibility) --> boot_2885_TEST.zip ErmaC Ey, Ey, SIR EL Capitan bootet OK !! Link to comment Share on other sites More sharing options...
PC IT Posted June 27, 2017 Share Posted June 27, 2017 Hello for all .. I am trying to boot the apfs partition by enoch or chameleon .. is there any ways to that .. or we boot the high sierra using hfs+ only waiting any reply Link to comment Share on other sites More sharing options...
Badruzeus Posted June 28, 2017 Share Posted June 28, 2017 TEST VERSION Edits and changes are courtesy of CrazyBirdy (High Sierra compatibility) --> boot_2885_TEST.zip ErmaC macOS 10.13 Beta 2 boot "OK..!!!" on 2nd Gen CPU with GF119 Graphics. Thanks via Enoch r2885 (Test) Enoch_r2885_Test_i3_2330M_GF119_10.13-b2.txt 1 Link to comment Share on other sites More sharing options...
ErmaC Posted June 29, 2017 Author Share Posted June 29, 2017 APFS is not supported by Chameleon/Enoch to date. But I'm sure it'll come soon. I can't do to much for the new filesystem... until the source will be available/released... or some reverse (I'm not able to do that) ErmaC 3 Link to comment Share on other sites More sharing options...
LockDown Posted June 30, 2017 Share Posted June 30, 2017 @ErmaC Iv seen that the trunk has been synced 15 days ago against your Enoch (set aside the latest device IDs update, kernel patch review by CrazyBirdy). is that mean that they now have same features, or Enoch still has more to offer? Link to comment Share on other sites More sharing options...
crazybirdy Posted June 30, 2017 Share Posted June 30, 2017 @ErmaC Iv seen that the trunk has been synced 15 days ago against your Enoch (set aside the latest device IDs update, kernel patch review by CrazyBirdy). is that mean that they now have same features, or Enoch still has more to offer? As I know, kernel and kexts patcher are only available for Enoch. 2 Link to comment Share on other sites More sharing options...
ErmaC Posted June 30, 2017 Author Share Posted June 30, 2017 As already mentioned by crazybirdy the main trunk don't have Kexts and Kernel patcher, Also other changes like: - embedded FakeSMC - new ati IDs and chipset definition - new nvidia IDs - device detection for Hight Sierra. (GUI) PS: the High Sierra default icons are still not available... (iDeviceHFS_hsi, iDeviceHFS_hsi_o) the code is ready... but the .png not (device_hfsfusion_hsi_o.png device_hfsfusion_hsi.png) anyone? ErmaC 4 Link to comment Share on other sites More sharing options...
ErmaC Posted June 30, 2017 Author Share Posted June 30, 2017 Do you mean icons like these? http://forum.osxlatitude.com/index.php?/topic/9106-sierra-bootloader-theme-icons/ http://forum.osxlatitude.com/index.php?/topic/8235-el-capitan-bootloader-theme-icons/ http://forum.osxlatitude.com/index.php?/topic/7783-yosemite-bootloader-themes-icons/ http://forum.osxlatitude.com/index.php?/topic/8236-recovery-partition-bootloader-themes-icon/ Yep like these... but following the default theme... --> http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/artwork/themes/default like this: --> http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/artwork/themes/default/device_hfsplus_sie.png ErmaC Link to comment Share on other sites More sharing options...
blackosx Posted June 30, 2017 Share Posted June 30, 2017 @ErmaC - Sorry I've not got found time yet to create High Sierra icon. @Hervé - Great! Thanks for working on it. If there any problems let me know and I can do it next week. 1 Link to comment Share on other sites More sharing options...
ErmaC Posted July 3, 2017 Author Share Posted July 3, 2017 I don't have details for the font and or text projection details on the HDD icons; I'm afraid all HSi logos I make therefore differ from existing ones, so it does not look good. No problem Hervé... let's see if blackosx can create it... ps: I don't see major problem with the 2885 test version... (the APFS is other story)... I'm going to update the svn and the pre-build package.. soon.. ErmaC 1 Link to comment Share on other sites More sharing options...
blackosx Posted July 3, 2017 Share Posted July 3, 2017 I've been away so thanks for waiting. Here you are. Chameleon Default Theme High Sierra Devices.zip Well done for having a go Hervé. For ref, the font is Lucida Grande Bold. However, the icons are generated in Cinema4D so it would be difficult to get a decent match other software. 1 Link to comment Share on other sites More sharing options...
ErmaC Posted July 3, 2017 Author Share Posted July 3, 2017 I've been away so thanks for waiting. Here you are. Chameleon Default Theme High Sierra Devices.zip Well done for having a go Hervé. For ref, the font is Lucida Grande Bold. However, the icons are generated in Cinema4D so it would be difficult to get a decent match other software. Thx guys. Perfect! blackosx! I upload it to the svn.... I'm going to rename it from xxx_hsie_xxx to xxx_hsi_xxx (I already wrote and commited the code in this way) ErmaC 1 Link to comment Share on other sites More sharing options...
newer71 Posted July 13, 2017 Share Posted July 13, 2017 Hi .. i have problem for booting of my ryzen system Chameleon 2667 reset my pc Link to comment Share on other sites More sharing options...
PC IT Posted July 18, 2017 Share Posted July 18, 2017 Hello Ermac. I am having a problem booting HS with enoch in my dell skylake hd520 In Clover i sorted the problem by dropping the BGRT ACPI Table , but still cant sort this in enoch .. can u or any one help me please.. How can i drop the BGRT ACPI Table in Enoch or Chameleon ? Waiting any reply. Thanks Link to comment Share on other sites More sharing options...
ErmaC Posted August 11, 2017 Author Share Posted August 11, 2017 Test version Can anyone try this version? I add Bronya's improvements for AMD CPUs and I wont to be sure about the compatibility before commit the changes Enoch 2894 V1 --> REMOVED ErmaC 3 Link to comment Share on other sites More sharing options...
Shaneee Posted August 11, 2017 Share Posted August 11, 2017 Test version Can anyone try this version? I add Bronya's improvements for AMD CPUs and I wont to be sure about the compatibility before commit the changes Enoch 2894 V1 --> Enoch_boot_2894_V1.zip ErmaC Boots just fine on FX 4300, Enoch (r2894 V1) [2017-08-11 19:07:04] Logging started: 2017/08/11, 18:57:31 [ CPU INFO ] Looking to disable C1E if is already enabled by the BIOS: Attempting to scan GPT boot volumes [biosdev=80h]: Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC Attempting to scan GPT boot volumes [biosdev=81h]: Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 3, type 426F6F74-0000-11AA-AA11-00306543ECAC Attempting to scan GPT boot volumes [biosdev=82h]: Attempting to scan FDISK boot volumes [biosdev=82h]: Attempting to scan GPT boot volumes [biosdev=83h]: Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 3, type 426F6F74-0000-11AA-AA11-00306543ECAC Reading GPT partition 4, type 48465300-0000-11AA-AA11-00306543ECAC Attempting to scan GPT boot volumes [biosdev=84h]: Attempting to scan FDISK boot volumes [biosdev=84h]: FileNVRAM develop version rc6 (Micky1979), scanning for nvram file: scanning hd(4,1)/ scanning hd(3,4)/ scanning hd(3,3)/ scanning hd(3,2)/ scanning hd(2,2)/ scanning hd(2,1)/ scanning hd(1,3)/ scanning hd(1,2)/ scanning hd(1,1)/ scanning hd(0,2)/ No nvram file was found, looking inside the Extra folder(s).. scanning hd(4,1)/Extra scanning hd(3,4)/Extra scanning hd(3,3)/Extra scanning hd(3,2)/Extra scanning hd(2,2)/Extra scanning hd(2,1)/Extra scanning hd(1,3)/Extra scanning hd(1,2)/Extra scanning hd(1,1)/Extra scanning hd(0,2)/Extra Scanning device 80... Boot UUID of 'macOS' (GPT HFS+): 2D98740D-5CA1-3B11-B6BE-F650C6AE3159 Kernel Cache file path (OS X 10.11 and newer): /System/Library/PrelinkedKernels/prelinkedkernel Loading Kernel Cache from: 'macOS' (GPT HFS+) Booting on macOS 10.12.6 (16G29) System Integrity Protection status: disabled (Custom Configuration). CsrActiveConfig = 0x67 (101100111) Configuration: Kext Signing: disabled Filesystem Protections: disabled Task for PID: disabled Debugging Restrictions: enabled Apple Internal: enabled DTrace Restrictions: disabled NVRAM Protections: disabled Device configuration: enabled BaseSystem Verification: enabled Decompressing Kernel Cache: - Decompressing Kernel Using lzvn [ KERNEL PATCHER START ] Will patch for 16.5.0 kernel version compatible. KernelBooter_kexts state: disabled! KernelPm state: disabled! KernelLapicError state: disabled! KernelLapicVersion state: disabled! KernelHaswell state: disabled! KernelcpuFamily state: disabled! KernelSSE3 state: disabled! Kernel patcher: end! [ KEXTS PATCHER START ] Kexts patcher: end! ACPI Table not found: /Extra/DSDT.aml No DSDT found, using 0 as uid value. Using PCI-Root-UID value: 0 [ NVIDIA GFX DEVICE INFO ] Class code: [0300] device number: 1 GeForce GT 430 1024MB NVc1 [10de:0de1]-[0000:0000] PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x0) NvidiaGeneric = No NvidiaSingle = Yes [ WIRELESS DEVICE INFO ] Class code: [0280] EnableWifi = No Atheros AR928X Wireless Network Adapter [168c:002a] PciRoot(0x0)/Pci(0x5,0x0)/Pci(0x0,0x0) [ ETHERNET DEVICE INFO ] Class code: [0200] EthernetBuiltIn = Yes Location number: 1 Setting up lan keys Realteck RTL8111/8168 PCI-E Gigabit Ethernet [10ec:8168] PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0) SMBIOS orig was = f10e0 SMBIOS new is = 3454000 SMBIOS rev.: 2.4, DMI rev.: 2.4 Handle: 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Apple Inc. Version: MP61.88Z.0116.B04.1312061508 Release Date: 06/12/13 BIOS Revision: 0.1 Handle: 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Apple Inc. Product Name: MacPro6,1 Version: 1.0 Serial Number: ** PRIVATE ** UUID: ** PRIVATE ** Wake-up Type: Power Switch SKU Number: Default SKU# Family: Mac Pro Handle: 0x0002, DMI type 2, 16 bytes Base Board Information Manufacturer: Apple Inc. Product Name: Mac-F60DEB81FF30ACF6 Version: x.x Serial Number: ** PRIVATE ** Asset Tag: Default Asset Tag# Location In Chassis: Not Specified Type: Motherboard Handle: 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Apple Inc. Type: Unknown Version: Serial Number: ** PRIVATE ** Asset Tag: Default Asset Tag# Handle: 0x0004, DMI type 4, 38 bytes Processor Information Socket Designation: Socket M2 Type: Central Processor Family: 0x1D Manufacturer: AMD ID: 0x178BFBFF00600F20 Version: AMD FX(tm)-4300 Quad-Core Processor External Clock: 206 MHz Max Speed: 4017 MHz Current Speed: 4000 MHz Upgrade: Socket 754 Serial Number: ** PRIVATE ** Asset Tag: Part Number: Handle: 0x0024, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: 4096 MB Form Factor: DIMM Locator: A0 Bank Locator: Bank0/1 Memory Type: RAM Speed: 1333 MHz Manufacturer: None Serial Number: ** PRIVATE ** Asset Tag: None Part Number: None Handle: 0x0025, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: 2048 MB Form Factor: DIMM Locator: A1 Bank Locator: Bank2/3 Memory Type: RAM Speed: 1333 MHz Manufacturer: None Serial Number: ** PRIVATE ** Asset Tag: None Part Number: None Handle: 0x0026, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: No Module Installed Form Factor: DIMM Locator: A2 Bank Locator: Bank4/5 Memory Type: RAM Speed: 1333 MHz Manufacturer: None Serial Number: ** PRIVATE ** Asset Tag: None Part Number: None Handle: 0x0027, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: No Module Installed Form Factor: DIMM Locator: A3 Bank Locator: Bank6/7 Memory Type: RAM Speed: 1333 MHz Manufacturer: None Serial Number: ** PRIVATE ** Asset Tag: None Part Number: None Handle: 0x0033, DMI type 131, 6 bytes Apple specific Processor Type Cpu-type = 0x0402 Handle: 0x0034, DMI type 132, 6 bytes Apple specific Processor Interconnect Speed QPI = 0 MT/s Handle 0x0035, DMI type 127, 4 bytes End of Table Adding device-properties string to DT [ ACPI PATCHER ] ACPI Table not found: /Extra/DSDT.aml Generating P-States config: No Generating C-States config: No ACPI Table not found: SSDT.aml RSDP version 1 found @f78e0. Length=20 RSDT @cfdf3000, Length 64 TABLE FACP, FADT found @cfdf3080, Length 116 Not an Intel platform, FACP Restart Fix will not be applied! Hardware Signature=0x00000000: using. TABLE MSDM, TABLE HPET, TABLE MCFG, TABLE TAMG, TABLE APIC, TABLE SSDT, RSDT: Original checksum 192, New checksum 70 at 345a000 RSDP: Original checksum 198, New checksum 188 ACPI version 1 patching finished No ACPI version 2 found. Ignoring Adding booter spec to the Platform Expert Starting Darwin/x86_64 [Darwin Kernel Version 16.5.0: Fri 14 Jul 2017 14:14:24 BST; * Shaneee *:xnu-3789.51.2/BUILD/obj/RELEASE_X86_64] Boot Args: npci=0x2000 1 Link to comment Share on other sites More sharing options...
ErmaC Posted August 14, 2017 Author Share Posted August 14, 2017 New version available in the download section: - added High Sierra upgrade and update ability by Micky1979 - merge Bronya's AMD CPU improvements Cordially ErmaC 3 Link to comment Share on other sites More sharing options...
Badruzeus Posted August 14, 2017 Share Posted August 14, 2017 New version available in the download section: - added High Sierra upgrade and update ability by Micky1979 Cordially ErmaC I feel good but..., is still need to manually edit SMBios.plist for 07/27/2017 datas, and is Chameleon Wizard.app uptodate? Thanks. bootlog.r2896_sandy_gt520m.txt Link to comment Share on other sites More sharing options...
ErmaC Posted August 14, 2017 Author Share Posted August 14, 2017 I feel good but..., is still need to manually edit SMBios.plist for 07/27/2017 datas, and is Chameleon Wizard.app uptodate? Thanks. Relate to Chameleon Wizard... If the provided data are not updates I can't do to much (I mean nothing...) The embedded value provided by the bootloader are very old (2014 If I remember correctly) and the code need a "huge" update will be a good option "port" the Clover SMBios function... And other story is... the values provided by the smbios.plist are correctly readed? ErmaC 1 Link to comment Share on other sites More sharing options...
Recommended Posts