ErmaC Posted June 13, 2014 Author Share Posted June 13, 2014 Nice guys! Blackosx PM me with the new icons (default Theme) the day one (after few hour Yosemite was presented) I try to repost here... Fabio 1 Link to comment Share on other sites More sharing options...
blackosx Posted June 13, 2014 Share Posted June 13, 2014 They're in your 2380 package here http://www.insanelymac.com/forum/topic/231075-chameleon-22svn-official-pkg-installer-binaries/?p=2024106 1 Link to comment Share on other sites More sharing options...
ErmaC Posted June 13, 2014 Author Share Posted June 13, 2014 I get "up and running" a temp OS X (courtesy of my wife... basically her MacMini) A Builded version of Chameleon with all the collected data until now...+ The Pike research (fake_efi.c)+ the janek202 and Micky suggestion (boot.c + bootstruct.c)+ Icons support (gui.c)+ Of course The BlackOSX Icons+ (Me) auto check for kernel position (basically if the OS X is 10.10 look into /System/Library/Kernels/ (boot.c)+ (Me) auto flag for kernelcache (driver.c) Let me know... Fabio 11 Link to comment Share on other sites More sharing options...
Micky1979 Posted June 13, 2014 Share Posted June 13, 2014 I believe that in the MacMini's wife there is no trace of gettex....pleeeeease install it Micky Link to comment Share on other sites More sharing options...
ErmaC Posted June 14, 2014 Author Share Posted June 14, 2014 I believe that in the MacMini's wife there is no trace of gettex....pleeeeease install it Micky Thx Anyway still present some error with all the detection (automatizing the match kernel name) but thx to Micky's test there is some progress... Fabio Link to comment Share on other sites More sharing options...
ErmaC Posted June 14, 2014 Author Share Posted June 14, 2014 Any feedback will be really appreciated. PKG Installer -> Binaries -> ErmaC 2 Link to comment Share on other sites More sharing options...
crusher Posted June 14, 2014 Share Posted June 14, 2014 I wait to finish your hard work for Chameleon for Yosemite. Good luck!!!! Link to comment Share on other sites More sharing options...
HUSABER Posted June 15, 2014 Share Posted June 15, 2014 Any feedback will be really appreciated. PKG Installer -> Chameleon-2.2svn-r2380.pkg.zip Binaries -> Chameleon_2380_i386.zip ErmaC Install 2380...and work,thanks 3 Link to comment Share on other sites More sharing options...
Micky1979 Posted June 15, 2014 Share Posted June 15, 2014 HUSABER hank you! So many downloads and so far no one had any result, except by you I think ErmaC will be happy with this ... it's hard to debug if no one answers! Micky 1 Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 15, 2014 Share Posted June 15, 2014 Will 2380 dual boot Yosemite and Mavericks on the same SSD? Link to comment Share on other sites More sharing options...
Micky1979 Posted June 15, 2014 Share Posted June 15, 2014 Will 2380 dual boot Yosemite and Mavericks on the same SSD? Why not? you don't have any USB stick to try with?? Link to comment Share on other sites More sharing options...
HUSABER Posted June 15, 2014 Share Posted June 15, 2014 Husabert hank you! So many downloads and so far no one had any result, except by you I think ErmaC will be happy with this ... it's hard to debug if no one answers! Micky i Now test,but this work beter from r2377,thanks ErmaC for your Jobs,i gota crazy with Clover,now everythings is OK Maybe this Night i testing Quadro Boot with r2380...Windows/BacktrackRC5/Mavericks/Yosemite..... And write here my result 1 Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 15, 2014 Share Posted June 15, 2014 I tried installing the earlier revisions that were compatible with Yosemite, and after installing it onto my SSD, it wouldn't boot Yosemite. Would only boot Mavericks. Figured it had something to do with the kernel being in different places or something. Was also hanging at boot with FileNVRAM. Link to comment Share on other sites More sharing options...
Micky1979 Posted June 15, 2014 Share Posted June 15, 2014 Husaber, can you kindly post your bdmesg? I tried installing the earlier revisions that were compatible with Yosemite, and after installing it onto my SSD, it wouldn't boot Yosemite. Would only boot Mavericks. Figured it had something to do with the kernel being in different places or something. Was also hanging at boot with FileNVRAM. Can you try again and see the differents. But for better results you can try to boot w/o any modules. FileNVRAM.dylib is not bootloader-related, it comes from third parties. 1 Link to comment Share on other sites More sharing options...
HUSABER Posted June 15, 2014 Share Posted June 15, 2014 BGMESG: Chameleon 2.2svn (svn-r2380) [2014-06-14 20:55:55] msr(485): ia32_perf_stat 0x06000620 max: 6 current: 6 CPU: Brand String: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz CPU: Vendor/Family/ExtFamily: 0x756e6547/0x6/0x0 CPU: Model/ExtModel/Stepping: 0x17/0x1/0x6 CPU: MaxCoef/CurrCoef: 0x6/0x6 CPU: MaxDiv/CurrDiv: 0x0/0x0 CPU: TSCFreq: 2000MHz CPU: FSBFreq: 333MHz CPU: CPUFreq: 2000MHz CPU: NoCores/NoThreads: 4/4 CPU: Features: 0x0000025f Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 3, type 426F6F74-0000-11AA-AA11-00306543ECAC Reading GPT partition 4, type 48465300-0000-11AA-AA11-00306543ECAC Read HFS+ file: [hd(0,2)/System/Library/CoreServices/SystemVersion.plist] 478 bytes. Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 2334 bytes. Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 3, type 48465300-0000-11AA-AA11-00306543ECAC Read HFS+ file: [hd(1,2)/System/Library/CoreServices/SystemVersion.plist] 478 bytes. Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 3, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 Read HFS+ file: [hd(2,2)/System/Library/CoreServices/SystemVersion.plist] 478 bytes. Module 'Symbols.dylib' by 'Chameleon' Loaded. Description: Chameleon symbols for linking Version: 0 Compat: 0 Read HFS+ file: [hd(0,2)/Extra/modules/FileNVRAM.dylib] 56136 bytes. Module 'FileNVRAM.dylib' by 'Unknown' Loaded. Description: Version: 0 Compat: 0 Read HFS+ file: [hd(0,2)/Extra/modules/Keylayout.dylib] 13464 bytes. Module 'Keylayout.dylib' by 'Unknown' Loaded. Description: Version: 0 Compat: 0 Read HFS+ file: [hd(1,2)/Extra/nvram.00000000-0000-0000-0000-6cf049c9f4c2.plist] 2594 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/theme.plist] 2705 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/background.png] 2102826 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/logo.png] 79126 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_generic.png] 12713 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_hfsplus.png] 10950 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_ext3.png] 12591 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_fat.png] 12713 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_fat16.png] 11742 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_fat32.png] 11751 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_ntfs.png] 14905 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_cdrom.png] 13605 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_selection.png] 899 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_scroll_prev.png] 3001 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/device_scroll_next.png] 3004 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_boot.png] 1747 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_verbose.png] 4116 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_ignore_caches.png] 4051 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_single_user.png] 4114 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_memory_info.png] 1634 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_video_info.png] 1593 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_help.png] 1711 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_verbose_disabled.png] 4101 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_ignore_caches_disabled.png] 4037 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_single_user_disabled.png] 4100 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/menu_selection.png] 3213 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/progress_bar.png] 3073 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/progress_bar_background.png] 3057 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/text_scroll_prev.png] 3042 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/text_scroll_next.png] 3046 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/font_console.png] 13762 bytes. Read HFS+ file: [hd(0,2)/Extra/Themes/Default2/font_small.png] 24592 bytes. Read HFS+ file: [hd(0,2)/Library/Preferences/SystemConfiguration/com.apple.Boot.plist] 232 bytes. Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 2334 bytes. Loading Darwin 10.1 10.7, 10.8 , 10.9 & 10.10 kernel cache file path = /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes. Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 20841336 bytes. Using PCI-Root-UID value: 1 Framebuffer @0xD0000000 MMIO @0xFDEC0000 I/O Port @0x0000CE00 ROM Addr @0x00000000 ATI card POSTed, reading Video BIOS from legacy space Framebuffer set to device's default: Hoolock # of ports set to framebuffer's default: 1 ATI Redwood ATI Radeon HD 5770 Series 1024MB (Hoolock) [1002:68b8] (subsys [1002:2543]):: PciRoot(0x1)/Pci(0x1,0x0)/Pci(0x0,0x0) -------------------------------- - AUDIO DEVICE INFO - -------------------------------- Using default HDAU layout-id: 0x01, 0x00, 0x00, 0x00 Class code: [0403] Model name: ATI RV840 HDA Controller (HDMi) [1002:aa58] (rev 00) Subsystem: [1002:aa58] PciRoot(0x1)/Pci(0x1,0x0)/Pci(0x0,0x1) device number: 2 -------------------------------- -------------------------------- - AUDIO DEVICE INFO - -------------------------------- Using default HDEF layout-id: 0x0c, 0x00, 0x00, 0x00 Class code: [0403] Model name: Intel NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: [1458:a002] PciRoot(0x1)/Pci(0x1b,0x0) device number: 3 -------------------------------- LAN Controller [10ec:8168] :: PciRoot(0x1)/Pci(0x1c,0x1)/Pci(0x0,0x0) Setting up lan keys Read HFS+ file: [hd(0,2)/Extra/smbios.plist] 1162 bytes. Intel Corporation G41 DRAM Controller [8086:2e30] at 00:00.0 Frequency detected: 533 MHz (1066) Dual Channel CAS:7 tRC:7 tRP:7 RAS:20 (7-7-7-20) SMBus CmdReg: 0x1 Scanning SMBus [8086:27da], mmio: 0x0, ioport: 0x500, hostc: 0x1 SPD[0] (size): 146 @0x50 Slot: 0 Type 24 2048MB (DDR3 SDRAM) 1066MHz Vendor=Silicon Power Computer & Communications PartNo=DBLT2GN568S SerialNo=00000000 SPD[0] (size): 255 @0x51 SPD[0] (size): 146 @0x52 Slot: 2 Type 24 2048MB (DDR3 SDRAM) 1066MHz Vendor=Silicon Power Computer & Communications PartNo=DBLT2GN568S SerialNo=00000000 SPD[0] (size): 255 @0x53 SPD[0] (size): 255 @0x54 SPD[0] (size): 255 @0x55 SPD[0] (size): 255 @0x56 SPD[0] (size): 255 @0x57 CPU is Intel(R) Xeon(R) CPU E5430 @ 2.66GHz, family 0x6, model 0x17 SMBIOS rev.: 2.4, DMI rev.: 2.4 Handle: 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Apple Inc. Version: MP51.88Z.006C.B02.0801021250 Release Date: 10/06/2010 BIOS Revision: 0.1 Handle: 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Apple Inc. Product Name: MacPro5,1 Version: 1.30f3 Serial Number: ** PRIVATE ** UUID: ** PRIVATE ** Wake-up Type: Power Switch SKU Number: Default SKU# Family: Mac Pro Handle: 0x0002, DMI type 2, 16 bytes Base Board Information Manufacturer: Apple Inc. Product Name: Mac-F42C88C8 Version: x.x Serial Number: ** PRIVATE ** Asset Tag: Default Asset Tag# Location In Chassis: Not Specified Type: Motherboard Handle: 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Apple Inc. Type: Unknown Version: Serial Number: ** PRIVATE ** Asset Tag: Default Asset Tag# Handle: 0x0004, DMI type 4, 38 bytes Processor Information Socket Designation: Socket 775 Type: Central Processor Family: 0x1 Manufacturer: Intel ID: 0x10676 Version: Intel(R) Xeon(R) CPU E5430 External Clock: 800 MHz Max Speed: 2800 MHz Current Speed: 2000 MHz Upgrade: Socket 478 Serial Number: ** PRIVATE ** Asset Tag: Part Number: Handle: 0x001a, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: 2048 MB Form Factor: DIMM Locator: A0 Bank Locator: Bank0/1 Memory Type: DDR3 Speed: 1333 MHz Manufacturer: Silicon Power Computer & Communications Serial Number: ** PRIVATE ** Asset Tag: Not Specified Part Number: DBLT2GN568S Handle: 0x001b, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: No Module Installed Form Factor: DIMM Locator: A1 Bank Locator: Bank2/3 Memory Type: DDR3 Speed: 1333 MHz Manufacturer: N/A Serial Number: ** PRIVATE ** Asset Tag: Not Specified Part Number: N/A Handle: 0x001c, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: 2048 MB Form Factor: DIMM Locator: A2 Bank Locator: Bank4/5 Memory Type: DDR3 Speed: 1333 MHz Manufacturer: Silicon Power Computer & Communications Serial Number: ** PRIVATE ** Asset Tag: Not Specified Part Number: DBLT2GN568S Handle: 0x001d, DMI type 17, 27 bytes Memory Device Error Information Handle: No Error Size: No Module Installed Form Factor: DIMM Locator: A3 Bank Locator: Bank6/7 Memory Type: DDR3 Speed: 1333 MHz Manufacturer: N/A Serial Number: ** PRIVATE ** Asset Tag: Not Specified Part Number: N/A Handle: 0x0024, DMI type 131, 6 bytes Apple specific Processor Type Cpu-type: 0x402 Handle 0x0025, DMI type 127, 4 bytes End of Table SMBIOS orig was = f0ce0 SMBIOS new is = 301e000 Read HFS+ file: [hd(0,2)/Extra/DSDT.aml] 16631 bytes. ACPI Table not found: SSDT.aml FADT: ACPI Restart Fix applied! FADT: Using custom DSDT! Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/Info.plist] 3334 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/PlugIns/AppleACPIButtons.kext/Contents/Info.plist] 2583 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/PlugIns/AppleACPIEC.kext/Contents/Info.plist] 1975 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPS2Nub.kext/Contents/Info.plist] 1743 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/Info.plist] 1666 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/AppleACPIPS2Nub.kext/Contents/Info.plist] 2243 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Keyboard.kext/Contents/Info.plist] 1769 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Mouse.kext/Contents/Info.plist] 1642 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Trackpad.kext/Contents/Info.plist] 1954 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/FakeSMC.kext/Contents/Info.plist] 5576 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/MacOS/AppleACPIPlatform] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/MacOS/AppleACPIPlatform] 425184 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/PlugIns/AppleACPIButtons.kext/Contents/MacOS/AppleACPIButtons] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/PlugIns/AppleACPIButtons.kext/Contents/MacOS/AppleACPIButtons] 47320 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/PlugIns/AppleACPIEC.kext/Contents/MacOS/AppleACPIEC] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPlatform.kext/Contents/PlugIns/AppleACPIEC.kext/Contents/MacOS/AppleACPIEC] 56752 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPS2Nub.kext/Contents/MacOS/AppleACPIPS2Nub] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/AppleACPIPS2Nub.kext/Contents/MacOS/AppleACPIPS2Nub] 38224 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/MacOS/ApplePS2Controller] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/MacOS/ApplePS2Controller] 55232 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/AppleACPIPS2Nub.kext/Contents/MacOS/AppleACPIPS2Nub] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/AppleACPIPS2Nub.kext/Contents/MacOS/AppleACPIPS2Nub] 34984 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Keyboard.kext/Contents/MacOS/ApplePS2Keyboard] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Keyboard.kext/Contents/MacOS/ApplePS2Keyboard] 35992 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Mouse.kext/Contents/MacOS/ApplePS2Mouse] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Mouse.kext/Contents/MacOS/ApplePS2Mouse] 35336 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Trackpad.kext/Contents/MacOS/ApplePS2Trackpad] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Trackpad.kext/Contents/MacOS/ApplePS2Trackpad] 48872 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/FakeSMC.kext/Contents/MacOS/FakeSMC] 4096 bytes. Read HFS+ file: [hd(0,2)/Extra/Extensions/FakeSMC.kext/Contents/MacOS/FakeSMC] 143712 bytes. Starting Darwin x86_64 Boot Args: boot-uuid=5C0FA0EA-DE4F-3163-A096-AABB2359600F rd=*uuid -v npci=0x2000 kext-dev-mode=1 -xcpm -v 1 Link to comment Share on other sites More sharing options...
crusher Posted June 15, 2014 Share Posted June 15, 2014 And work for me guys.Install 2380 on Yosemite and good work. 2 Link to comment Share on other sites More sharing options...
HUSABER Posted June 15, 2014 Share Posted June 15, 2014 And work for me guys.Install 2380 on Yosemite and good work. Why NOT?Work Fine,only need to use your heart to install Link to comment Share on other sites More sharing options...
ErmaC Posted June 15, 2014 Author Share Posted June 15, 2014 Finally The GUI icons also are displayed? Or generic icon are displayed for Yosemite? Apart the error for the lzzs bad compression... The kernel path is automatically detected? Link to comment Share on other sites More sharing options...
Micky1979 Posted June 15, 2014 Share Posted June 15, 2014 Ok guys, so the job queue faster. @HUSABER yuo can't boot w/o kext-dev-mode=1? You have not installed the default theme? EDIT FinallyThe GUI icons also are displayed? Or generic icon are displayed for Yosemite?Apart the error for the lzzs bad compression...The kernel path is automatically detected? It work, you can see it in the @ekica bdmesg 1 Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 15, 2014 Share Posted June 15, 2014 Husaber, can you kindly post your bdmesg? Can you try again and see the differents. But for better results you can try to boot w/o any modules. FileNVRAM.dylib is not bootloader-related, it comes from third parties. I was just under the impression that it was required for iMessage activation. I will give it a shot, but I'm gonna test it from a USB stick first cuz I just got Clover all figured out lolChanson is just a lot faster. Clover takes me a good 20-30 seconds to reach GUI. Chameleon is like 1 and a half lol Link to comment Share on other sites More sharing options...
HUSABER Posted June 15, 2014 Share Posted June 15, 2014 Ok guys, so the job queue faster. @HUSABER yuo can't boot w/o kext-dev-mode=1? You have not installed the default theme? Yup..my Kernel flag is--v npci=0x2000 kext-dev-mode=1 -xcpm And sorry...i use mine themes,not Default..its ugly(sorry ) Default2.zip 1 Link to comment Share on other sites More sharing options...
Micky1979 Posted June 15, 2014 Share Posted June 15, 2014 I was just under the impression that it was required for iMessage activation. Yep, but ATM is for testing Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 15, 2014 Share Posted June 15, 2014 ? Link to comment Share on other sites More sharing options...
HUSABER Posted June 15, 2014 Share Posted June 15, 2014 Finally The GUI icons also are displayed? Or generic icon are displayed for Yosemite? Apart the error for the lzzs bad compression... The kernel path is automatically detected? Don't glory everything is fine BIG THANKS ? What ???try to test..this is Hackintosh Link to comment Share on other sites More sharing options...
ADHDMedia Posted June 15, 2014 Share Posted June 15, 2014 Lol thought it was funny. So here is the result when I try to boot Yosemite with Chameleon, same as before: Stuck at PCI Configuration Begin. For no reason. Lol the install works perfectly with Clover and the Mavericks install boots fine with both. Just Yosemite throws this error. Haven't gotten this error since my AMD rig lol Link to comment Share on other sites More sharing options...
Recommended Posts