mitch_de Posted October 29, 2012 Share Posted October 29, 2012 Thanks - i used the chameleon wizard (V 4.1) to get an generated Serialnumber. I only changed that and now also the first screen of systeminfo shows MacPro Link to comment Share on other sites More sharing options...
p.H Posted October 30, 2012 Share Posted October 30, 2012 Thanks - i used the chameleon wizard (V 4.1) to get an generated Serialnumber. I only changed that and now also the first screen of systeminfo shows MacPro Apple Inc uses the serial to identify which product you're currently using Link to comment Share on other sites More sharing options...
mitch_de Posted October 30, 2012 Share Posted October 30, 2012 Ok, i thinked that the MacModell values in ASCII would do that job already Link to comment Share on other sites More sharing options...
p.H Posted October 30, 2012 Share Posted October 30, 2012 Ok, i thinked that the MacModell values in ASCII would do that job already if that works, there would be no reason for serial. But it's required. Link to comment Share on other sites More sharing options...
xmen107 Posted November 6, 2012 Share Posted November 6, 2012 Never fixed my reboot loop with latest version of chameleon, im stay in rev.755 or Clover because is the best boots for my laptop...rev.755 is missing KernelCache but work very good without kernel panics, most recents revision of chameleon trunk or enoch when i shutdown or reboot my laptop i have contant reboot loops:( something is wrong and never fixed....my laptop is a compaq presario CQ200EP, chipset Intel Cantiga PM45 with NVIDIA 9200M GE. I'm not the only one having this problem... already tested different versions of the bootloader but nothing solves. I'm also using the Clover that works very well for me on Mountain Lion 10.8.2. Link to comment Share on other sites More sharing options...
artur_pt Posted November 7, 2012 Share Posted November 7, 2012 hi fabio where is final version of 2.1 snv is already launched ? but in trunk already rev 2110 by you ... good hack Link to comment Share on other sites More sharing options...
blackosx Posted November 7, 2012 Share Posted November 7, 2012 @artur-pt http://forge.voodoop...leon/downloads/ Link to comment Share on other sites More sharing options...
artur_pt Posted November 7, 2012 Share Posted November 7, 2012 @artur-pt http://forge.voodoop...leon/downloads/ thanks gonna test good hack Link to comment Share on other sites More sharing options...
Regi Yassin Posted November 8, 2012 Share Posted November 8, 2012 what is this mean? xcode4.4 edit: upgraded to commandline 4.5.1, still the same. Link to comment Share on other sites More sharing options...
bgrau Posted November 13, 2012 Share Posted November 13, 2012 I am looking for 2.2svn and this link is not working The latest Buildbot builds give you the choice of download the compiled files and/or a package installer. Those builds can be found at: http://builds.voodoo...uilds/Xcode4.2/ Link to comment Share on other sites More sharing options...
existation Posted November 27, 2012 Share Posted November 27, 2012 Can any one help me. Why I have wrong fsb detection. My CPU runs at 800/4=200MHz, but system prof. saiys 733/4=183.25. And memory runs at 615 MHz? If I boot with clover all corect, but i need to use cham-boot (clover can't boot windows on the same partition) Speed of CPU under cham-boot slower than clover boot (about 300 geekbench's). Why? Any help needed. Pls!!!!! PS I have T9300 cpu & PM965 chipset in MB. All ok, saw in tech docs. Link to comment Share on other sites More sharing options...
solarein Posted December 12, 2012 Share Posted December 12, 2012 I think I may have found a bug. While installing to a new partition with only OS X files and no bootloader or /Extra folder on it, the installer failed to create and write the specified settings to the org.chameleon.Boot.plist file. The logs show that while trying to write those settings, the error encountered was that the file was not found. Seems like the installer just needs to create the /Extra folder and a blank org.chameleon.Boot.plist file if those do not exist yet. Link to comment Share on other sites More sharing options...
existation Posted December 12, 2012 Share Posted December 12, 2012 Hi. Thanks for reply. 1 What log says? 2 I installed to new partition and installer created extra folder and org.cham.plist. than i changed to mine *.plist. If I understood right, i should to reinstall cham. But before I need to remove my extra folder to other place? then I need to open org.cham and write down my settings? Help me. BTW english is not my native language, sorry in future. Link to comment Share on other sites More sharing options...
The Real Deal Posted December 23, 2012 Share Posted December 23, 2012 Hello fellas and merry Christmas, I have compiled myself Chameleon in the past without any problems. Today i have pulled the sources to compil the last rev (2149). OS is 10.6.8 and Xcode 3.2.6 installed, but the build fail at some point ; please see the attached image ; any help would be appreciated. Link to comment Share on other sites More sharing options...
Larx Posted December 25, 2012 Share Posted December 25, 2012 With Enoch Chameleon 2.2svn i can boot only with -f Without -f i get: RTC: only single RAM bank? Can someone help me or i shoud back to Chameleon-2.1svn-r2070? Thanks ! Link to comment Share on other sites More sharing options...
rayap Posted December 26, 2012 Share Posted December 26, 2012 With Chameleon-2.2svn-r2140, me too can only boot with -f Looks like the extensions in /E/E do not load otherwise. Link to comment Share on other sites More sharing options...
Larx Posted December 26, 2012 Share Posted December 26, 2012 Install also the KernelPatcher.dylib module in Extra/modules. Fabio THANKS FABIO ! Working now ! Link to comment Share on other sites More sharing options...
mitch_de Posted December 27, 2012 Share Posted December 27, 2012 Install also the KernelPatcher.dylib module in Extra/modules. Fabio Would be nice to get some infos about what module is needed and for what. I use newer chameleon builds but never installed any of the modules in modules folder (for me its empty). I use also C2D. 3 Link to comment Share on other sites More sharing options...
rayap Posted December 27, 2012 Share Posted December 27, 2012 Install also the KernelPatcher.dylib module in Extra/modules. Fabio Works but appear not to load patched AppleRTC.kext from /E/E only from /S/L/E. Thanks anyway. Link to comment Share on other sites More sharing options...
meklort Posted December 27, 2012 Share Posted December 27, 2012 Works but appear not to load patched AppleRTC.kext from /E/E only from /S/L/E. If AppleRTC is already in /S/L/E, the kernel will always use the one in the prelinked kernel. Link to comment Share on other sites More sharing options...
juanerson Posted December 27, 2012 Share Posted December 27, 2012 Hi rayap. In Mountain Lion 10.8 (also Lion 10.7) none extension will not load from /E/E using "UseKernelCache=Yes" which is the option by default (to bring fast boot). But it works with "UKC=No" (slow boot), because those OS X versions have kernelcache (prelinked kernel) instead of Extensions.mkext (Snow Leopard 10.6). Regards. Link to comment Share on other sites More sharing options...
rayap Posted December 28, 2012 Share Posted December 28, 2012 Thanks Guys. Previously revisions no issues, with patched AppleRTC in /E/E and retained vanilla AppleRTC in /S/L/E. Now resolved with r2140 by including KernelPatcher.dylib and deleting vanilla AppleRTC from S/L/E. Have never set "UseKernelCache" either way. Trying to keep S/L/E vanilla except for AppleHDA. Link to comment Share on other sites More sharing options...
rvxtm Posted December 29, 2012 Share Posted December 29, 2012 My question is : do you still have to use "UseKernelCache=1" or is it default enabled even if i use the kernel patcher module for /e/e ? Link to comment Share on other sites More sharing options...
juanerson Posted January 2, 2013 Share Posted January 2, 2013 Just for record, "UseKernelCache=Yes" is the default option in Chameleon 2.1 and 2.2 svn. 1 Link to comment Share on other sites More sharing options...
plsh2me Posted January 2, 2013 Share Posted January 2, 2013 With latest 2140 2.2svn my system goes on kp System description on signature. Thanks Palash Link to comment Share on other sites More sharing options...
Recommended Posts