Malay Keshav Posted December 13, 2010 Share Posted December 13, 2010 The Installation worked. After installation , i used BOOTcD to boot. Then installed 10.6.5 combo update.and restarted, and used BootCD again to boot. Now MAC doesnt work. The Desktop comes, but nothing works. My mouse doesnt move. Keyboard doesnt work. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 13, 2010 Author Share Posted December 13, 2010 Here's my boot.plist in .rtf format, could you please tell me where and how should i put graphic enabler. Thanks. PS. Am using a DVI port "to-and-from" i.e. from my gfx card to my viewsonic 19" add this <key>GraphicsEnabler</key> <string>Yes</string> The Installation worked. After installation , i used BOOTcD to boot. Then installed 10.6.5 combo update.and restarted, and used BootCD again to boot. Now MAC doesnt work. The Desktop comes, but nothing works. My mouse doesnt move. Keyboard doesnt work. which bootcd you used Link to comment Share on other sites More sharing options...
kalmdave Posted December 13, 2010 Share Posted December 13, 2010 I did add graphics enabler string find the file attached and tell if i have done right. Sad news is it didn't work. I replaced the boot file and added the enabler string to boot plist. It went on a reboot loop. I put back the original, it didn't go on reboot loop, but din't reach the desktop either. Now I will remove the enabler string from the boot.plist, then let's see. But Mohamed it my gfx card "that" cursed Thank god you are here. It's 12:30 in the night, how long would you be here? com.apple.Boot.plist_withEnabler.rtf Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 13, 2010 Author Share Posted December 13, 2010 I did add graphics enabler string find the file attached and tell if i have done right. Sad news is it didn't work. I replaced the boot file and added the enabler string to boot plist. It went on a reboot loop. I put back the original, it didn't go on reboot loop, but din't reach the desktop either. Now I will remove the enabler string from the boot.plist, then let's see. But Mohamed it my gfx card "that" cursed Thank god you are here. It's 12:30 in the night, how long would you be here? isee thta you dont use kernel flag busratio=xx arch=i386 -force64 as it is on boot.plist fie on guide use boot.plist on guide and tell me result Link to comment Share on other sites More sharing options...
kalmdave Posted December 13, 2010 Share Posted December 13, 2010 Ok i'll do that, and update you. Please don't go, please. I neeed to get over it tonite. Thanks. Find me boot.plist edited that i used with the boot file that you gave. also find 2 screenies of the errors that i received post that. I could get a good resolution if screenies in one shot , so they are in two parts i hope they are informative enuff, or else i'll shoot one shot for you again. com.apple.Boot.plist_Edited.rtf Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 13, 2010 Author Share Posted December 13, 2010 Ok i'll do that, and update you. Please don't go, please. I neeed to get over it tonite. Thanks. Find me boot.plist edited that i used with the boot file that you gave. also find 2 screenies of the errors that i received post that. I could get a good resolution if screenies in one shot , so they are in two parts i hope they are informative enuff, or else i'll shoot one shot for you again. picture doesnt show any thing spesifc can you see dmos recived ? Link to comment Share on other sites More sharing options...
kalmdave Posted December 13, 2010 Share Posted December 13, 2010 picture doesnt show any thing spesifccan you see dmos recived ? DMOS ? How do i find it? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 13, 2010 Author Share Posted December 13, 2010 DMOS ? How do i find it? do new picture for all screen Link to comment Share on other sites More sharing options...
kalmdave Posted December 13, 2010 Share Posted December 13, 2010 Ok I think i understood Dsmos.kext = Dont Steal Mac OS X.kext ? Are asking do i see that line Dont Steal Mac OS X line while booting in verbose mode? Ok i'll do all screens. Link to comment Share on other sites More sharing options...
tekm Posted December 13, 2010 Share Posted December 13, 2010 @ kalmdavei uploaded to you boot file containing id of your card so replace boot file on root with this and add graphicsenabler to boot.plist Thanks for the file Mohamed! Yesterday I actually ended up installing Chameloen RC5 r643 and and the latest fermi drivers, and after dropping in my GTX 470, the graphics worked fine. for usb try andy kext on latest update of topic hope it works for you I installed the "IOUSBFamily_USB3_AnV" kext but I my computer still won't boot up if i have the "USB 2.0 controller" in the bios enabled. I attached the verbose output before the computer stalls. Link to comment Share on other sites More sharing options...
kalmdave Posted December 13, 2010 Share Posted December 13, 2010 Here's a combo of pics and video of my system. 14122010A1_.rar 14122010001.zip Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 13, 2010 Author Share Posted December 13, 2010 Thanks for the file Mohamed! Yesterday I actually ended up installing Chameloen RC5 r643 and and the latest fermi drivers, and after dropping in my GTX 470, the graphics worked fine. I installed the "IOUSBFamily_USB3_AnV" kext but I my computer still won't boot up if i have the "USB 2.0 controller" in the bios enabled. I attached the verbose output before the computer stalls. i dont have no any solution for that you can stay on usb1.0 till any thing new occur Here's a combo of pics and video of my system. are there some thing like cant load kext as the kernel log is long try do pfix i will go now bye Link to comment Share on other sites More sharing options...
kalmdave Posted December 13, 2010 Share Posted December 13, 2010 No it doesn't get stuck at no kext load or anything like that. You know what i really really appreciate for your help. I'll do a clean install from 10.6.3 retail dvd . Can I ask help regarding that, as of now i was bothering with 10.5.8 . Regards. Bye! Take Care ! Link to comment Share on other sites More sharing options...
tekm Posted December 13, 2010 Share Posted December 13, 2010 i dont have no any solution for that you can stay on usb1.0 till any thing new occur Its okay, I think I got it to work just now! I have to disable legacy usb support, which prevents my usb keyboard from working during chameleon, but once inside mac os x usb 2.0 works. This solution is kind of inconvenient since i can't select boot up options in chameleon if i don't have legacy usb support enabled, but if i specify a time out option in chameleon I can at least automatically boot in to os x. However if I want to reboot in windows I have to go to the bios and reenable legacy usb support each time. Link to comment Share on other sites More sharing options...
Malay Keshav Posted December 14, 2010 Share Posted December 14, 2010 which bootcd you used i used bootCD 1.5 given in the guide. The Screenshot :: Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 14, 2010 Author Share Posted December 14, 2010 i used bootCD 1.5 given in the guide. The Screenshot :: make sure you use this bootcd not other as this only contain 10.5 kernel that support usb on 10.6.5 Link to comment Share on other sites More sharing options...
Malay Keshav Posted December 14, 2010 Share Posted December 14, 2010 make sure you use this bootcd not other as this only contain 10.5 kernel that support usb on 10.6.5 Installed legacy kernal 10.5 AND EVERYTHING WORKIN!!! I can boot from Hard Disk as well!!! Thanks for the awesom guide Mahamed!!! i had lost hope in installing MAC on my AMD PC, and was going to buy a mac pro.. now i can work on my project if possible, can you please guide how to get my ATI 5750 working? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 14, 2010 Author Share Posted December 14, 2010 Installed legacy kernal 10.5 AND EVERYTHING WORKIN!!! I can boot from Hard Disk as well!!! Thanks for the awesom guide Mahamed!!! i had lost hope in installing MAC on my AMD PC, and was going to buy a mac pro.. now i can work on my project if possible, can you please guide how to get my ATI 5750 working? use vervet boot file from this topic http://www.insanelymac.com/forum/index.php?showtopic=231756 Link to comment Share on other sites More sharing options...
LowRidinCrew Posted December 15, 2010 Share Posted December 15, 2010 Question: My AMD Phenom II X6 1055T is being used in my Pro Tools, and when I try to bounce a song to disk it says (CPU Overload Occured) all 6 cores are activated, its as if its not running full speed or something. It cant go higher that 14 on the multiplier because its not the black edition, could the bus ratio slow down my CPU? Link to comment Share on other sites More sharing options...
littledude565 Posted December 15, 2010 Share Posted December 15, 2010 I there man, great guide. I've downloaded the bootcd but when i try and boot it it gives me a load of errors. Heres a picture in the attachments Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 15, 2010 Author Share Posted December 15, 2010 Question: My AMD Phenom II X6 1055T is being used in my Pro Tools, and when I try to bounce a song to disk it says (CPU Overload Occured) all 6 cores are activated, its as if its not running full speed or something. It cant go higher that 14 on the multiplier because its not the black edition, could the bus ratio slow down my CPU? you can see speed of cpu from system profiler I there man, great guide. I've downloaded the bootcd but when i try and boot it it gives me a load of errors. Heres a picture in the attachments what is your motherboard name and did you tried mac before on this pc i think no also if you have distru of mac like ideneb iatoks ..... try use them and see if there are the same error if there are same error you can try update bios play around bios setting to me i dont have solution yet for cant find driver for acpi Link to comment Share on other sites More sharing options...
littledude565 Posted December 15, 2010 Share Posted December 15, 2010 Hi thanks for replying, my motherboard is an ASUS m2n61-ar I've got the hazard one and the leo4allv3 they both boot and install fine, well sorta I can get them installed but when i try and boot I always get errors. So I guess my comp can boot MAC Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 15, 2010 Author Share Posted December 15, 2010 Hi thanks for replying, my motherboard is an ASUS m2n61-ar I've got the hazard one and the leo4allv3 they both boot and install fine, well sorta I can get them installed but when i try and boot I always get errors. So I guess my comp can boot MAC did you tried snow leopard ones ? Link to comment Share on other sites More sharing options...
littledude565 Posted December 15, 2010 Share Posted December 15, 2010 Yes. I tried both snow leopard and leopard =/ Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted December 15, 2010 Author Share Posted December 15, 2010 Yes. I tried both snow leopard and leopard =/ ithink may be pronlem from new kernel any way try anther boot cds try nawcom one http://www.kexts.com/view/586-nawcom_mod_cd_v0.3.html Link to comment Share on other sites More sharing options...
Recommended Posts