Mohamed Khairy Posted October 14, 2010 Author Share Posted October 14, 2010 here is my question!!my specs here :mobo : asus M4A89 cpu : amd phenom II X4 965 hard drive : 2 sata in raid 0 so..my question is.??!!??can i install in any way SL on raid drives??i have win7 installed!!u say that if i have raid i CANNOT..but with some googl-ing i found out that there is a way!!! plz can u help me?? try use boot cd if you get panic you cant if not continue Link to comment Share on other sites More sharing options...
keden Posted October 15, 2010 Share Posted October 15, 2010 @BoostedH23a1 just about every app i tried to download and install i would get that same error message. quit unexpectedly Do this: 7- first copy amd patcher to /usr/bin 8- run terminal again 9- type this command CODE sudo -s amd_insn_patcher /usr/lib/dyld /usr/lib/dyld.patched cp /usr/lib/dyld.patched /usr/lib/dyld amd_insn_patcher /usr/lib/libSystem.B.dylib /usr/lib/libSystem.B.dylib.patched cp /usr/lib/libSystem.B.dylib.patched /usr/lib/libSystem.B.dylib now you finished patching you need to add to boot.plist on kernel flags -force64 this flag important to run on 64bit Link to comment Share on other sites More sharing options...
Ephurix Posted October 15, 2010 Share Posted October 15, 2010 can i know do i use the new 0.6 boot cd now?! Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 15, 2010 Author Share Posted October 15, 2010 can i know do i use the new 0.6 boot cd now?! what ?! Link to comment Share on other sites More sharing options...
jeannie Posted October 16, 2010 Share Posted October 16, 2010 Just done installed thanks Mohamed Khairy Running smooth.. Now editing smbios.plist trying to put MacPro 4.1 seem like giving me kernel panic..if someone has good smbios.plist for AMD please upload.. itune works everything running very smooth expect sleep.. Dual boot with Windows 7 & Snow 10.6.4 PNY Geforece 9800GT Dual Screen 24" samsung. Audio ACL662 VoodooHDA AMD Athlon™ II X4 620 BIOSTAR A770E3 Mother Board Crosair 4GB DDR3 1333 PNY Geforece 9800GT 1024MB GDDR3 2-WD 500GB 1-WD 250GB SATA Link to comment Share on other sites More sharing options...
Ephurix Posted October 16, 2010 Share Posted October 16, 2010 what ?! as in which bootcd to use? the one in the first step or the 0.6 mentioned at the end of the post Link to comment Share on other sites More sharing options...
keden Posted October 16, 2010 Share Posted October 16, 2010 Just done installed thanks Mohamed Khairy Running smooth.. Now editing smbios.plist trying to put MacPro 4.1 seem like giving me kernel panic..if someone has good smbios.plist for AMD please upload.. itune works everything running very smooth expect sleep.. Dual boot with Windows 7 & Snow 10.6.4 PNY Geforece 9800GT Dual Screen 24" samsung. Audio ACL662 VoodooHDA AMD Athlon™ II X4 620 BIOSTAR A770E3 Mother Board Crosair 4GB DDR3 1333 PNY Geforece 9800GT 1024MB GDDR3 2-WD 500GB 1-WD 250GB SATA Install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] before the actual install the is options what you want exactly(has many utilities) so just go to smbios and choose Mac4.1, it will install auto in Extra folder. Worked on mine, but there is no real reason for changing the name no changes or improvements whatsoever. Link to comment Share on other sites More sharing options...
jeannie Posted October 16, 2010 Share Posted October 16, 2010 Install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]before the actual install the is options what you want exactly(has many utilities) so just go to smbios and choose Mac4.1, it will install auto in Extra folder. Worked on mine, but there is no real reason for changing the name no changes or improvements whatsoever. Thanks keden i will try that... I heard mac 4.1 smbios has better performance on graphic card....tonymacx86 forums.. maybe not Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 16, 2010 Author Share Posted October 16, 2010 when you change name of pc from imac to macpro etc and get painc boot with -v -x -f then when reach desktop restart now it will work normal i tested it before when changing serial of mac for sleep it is impossible now to amd as there are issue on USB controller that will not work after wake up it need to full check on dsdt to enable usb work after wakeup as in which bootcd to use? the one in the first step or the 0.6 mentioned at the end of the post yes lateast sure Link to comment Share on other sites More sharing options...
Ephurix Posted October 17, 2010 Share Posted October 17, 2010 I had set sata to AHCI and followed the steps First i boot using the bootCD 0.6 and put in the retail dvd afterwards and press F5 and ENTER However, the screen remain blank afterwards, i waited and waited, nth happens, Can anyone help? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 17, 2010 Author Share Posted October 17, 2010 I had set sata to AHCI and followed the steps First i boot using the bootCD 0.6 and put in the retail dvd afterwards and press F5 and ENTER However, the screen remain blank afterwards, i waited and waited, nth happens, Can anyone help? more info what is your hardware Link to comment Share on other sites More sharing options...
Ephurix Posted October 17, 2010 Share Posted October 17, 2010 AMD P2 x4 925 MSI 870a-G54 Sapphire 5850 I burn the retail 10.6.3 to a dvd r-dl. but strangely the size is only around 750mb where the original .dmg i downloaded was around 7gb.. could this have cause the problem? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 17, 2010 Author Share Posted October 17, 2010 AMD P2 x4 925MSI 870a-G54 Sapphire 5850 I burn the retail 10.6.3 to a dvd r-dl. but strangely the size is only around 750mb where the original .dmg i downloaded was around 7gb.. could this have cause the problem? ok is the screen trun off before installer appear it may be from 5850 card so use atinforce boot on topic it nearly dont contain enabler and when you finish install tell me Link to comment Share on other sites More sharing options...
Ephurix Posted October 17, 2010 Share Posted October 17, 2010 yes it worked. i am at the set up screen now.. thanks Link to comment Share on other sites More sharing options...
s0rdfish Posted October 17, 2010 Share Posted October 17, 2010 Just done installed thanks Mohamed Khairy Running smooth.. Now editing smbios.plist trying to put MacPro 4.1 seem like giving me kernel panic..if someone has good smbios.plist for AMD please upload.. itune works everything running very smooth expect sleep.. Dual boot with Windows 7 & Snow 10.6.4 PNY Geforece 9800GT Dual Screen 24" samsung. Audio ACL662 VoodooHDA AMD Athlon™ II X4 620 BIOSTAR A770E3 Mother Board Crosair 4GB DDR3 1333 PNY Geforece 9800GT 1024MB GDDR3 2-WD 500GB 1-WD 250GB SATA Plzz can u suggest me how to install mac os x on this config Can u explain me in detail how u installed plzz i ill ill be really thanks full for this help plzz i need mac os x vry badly for my video editing work plzz AMD Phenom II X6 1055T Gigabyte GA-880GM-UD2H Seagate 1TB Hard disk 2*2GB DDR3 1333Mhz Transcend RAM corsair cx450w msi gts450 cyclone Samsung DVD Writer MicroSoft keyboard + mouse USB is this config ready for Mac osx ? can i install mac osx ? where did u get tht mac osx ? Plzz somebody help me i need Mac Os X vry badly plzzz frds help me Help me in Bios sitting plzzzz Link to comment Share on other sites More sharing options...
Ephurix Posted October 17, 2010 Share Posted October 17, 2010 *after Setup boot loader put your boot.plist that contian flag busratio=16 on extra it is very important to next step can i know where do i find the "boot.plist" from this step? Link to comment Share on other sites More sharing options...
s0rdfish Posted October 17, 2010 Share Posted October 17, 2010 Mohamed Khairy Plzz help me thanks in advance !! Link to comment Share on other sites More sharing options...
Ephurix Posted October 17, 2010 Share Posted October 17, 2010 *after Setup boot loader put your boot.plist that contian flag busratio=16 on extra it is very important to next step can i know where do i find the "boot.plist" from this step? is it the one that's in the bootcd? com.apple.Boot.plist Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 17, 2010 Author Share Posted October 17, 2010 *after Setup boot loader put your boot.plist that contian flag busratio=16 on extra it is very important to next step can i know where do i find the "boot.plist" from this step? install pkg http://www.insanelymac.com/forum/index.php?showtopic=231075 it will install chamelon on system perf from it you can add busratio and for gfx card replace boot file on mac partion with this file http://www.insanelymac.com/forum/index.php...st&id=77479 and add gfx enbaler from chamelon also is it the one that's in the bootcd? com.apple.Boot.plist yes put you need to remove key from it kernel key Mohamed Khairy Plzz help me thanks in advance !! why you dont try and when you face problem write it Link to comment Share on other sites More sharing options...
s0rdfish Posted October 17, 2010 Share Posted October 17, 2010 Mohamed Khairy Plzz help me will my config support ?? Mac OS X 10.6 Snow Leopard Retail is around 7gb is tht 1 i need to download plzz im noob in this things Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 17, 2010 Author Share Posted October 17, 2010 Mohamed Khairy Plzz help me will my config support ?? Mac OS X 10.6 Snow Leopard Retail is around 7gb is tht 1 i need to download plzz im noob in this things download retail 10.6.3 hotiso Link to comment Share on other sites More sharing options...
Ephurix Posted October 17, 2010 Share Posted October 17, 2010 i have install the pkg, so how do i set the busratio in system pref? and for "yes put you need to remove key from it kernel key" I don't really get you. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 17, 2010 Author Share Posted October 17, 2010 i have install the pkg, so how do i set the busratio in system pref? and for "yes put you need to remove key from it kernel key" I don't really get you. set busratio from system pref best Link to comment Share on other sites More sharing options...
Ephurix Posted October 17, 2010 Share Posted October 17, 2010 set busratio from system pref best under which option in system pref? and i have replace the boot for graphic card but what about the gfx enbaler. can i know how do i add it? i need the help, thanks man! Link to comment Share on other sites More sharing options...
s0rdfish Posted October 17, 2010 Share Posted October 17, 2010 download retail 10.6.3 hotiso Mohamed Khairy thxx for ur fast reply but i need to know is this the right 1 bcoz i have limited download connection soo i dont want to waste my bandwidth soo plzz let me know is this 1 right to download Mac OSX Snow Leopard 10.6.3-HOTiSO | 7.54 GiB ?? and 1 more question how do i make bootable disk bcoz its already 6.32 gb ?? Plzz dont get angry on my noob question plzz Mohamed Link to comment Share on other sites More sharing options...
Recommended Posts