Jabbles Posted August 21, 2010 Share Posted August 21, 2010 K I've made progress I got to a grey-ish white screen! Used the 4870 disc I reformatted windows everything is set to achi Everything is SATA Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 21, 2010 Author Share Posted August 21, 2010 K I've made progress I got to a grey-ish white screen! Used the 4870 disc I reformatted windows everything is set to achi Everything is SATA what pelase say new problem again with picture if is availble Link to comment Share on other sites More sharing options...
Jabbles Posted August 21, 2010 Share Posted August 21, 2010 It got stuck here Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 21, 2010 Author Share Posted August 21, 2010 1- TRY new boot cd in topic 2- if not work try to remove one hd4870 and use one display till you setup it Link to comment Share on other sites More sharing options...
Jabbles Posted August 22, 2010 Share Posted August 22, 2010 I tried again and the picture below is what happened twice I partitioned the drive and formatted to Mac Os Extended (journaled) Install failed at about 12 minutes left Edit: I tried unchecking printers and extra languages before install but that lead to the same error Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 22, 2010 Author Share Posted August 22, 2010 I tried again and the picture below is what happened twice I partitioned the drive and formatted to Mac Os Extended (journaled) Install failed at about 12 minutes left Edit: I tried unchecking printers and extra languages before install but that lead to the same error this mean bad DVD try anther one or restore dvd on usb flash memory Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 22, 2010 Author Share Posted August 22, 2010 if it stoped in middlethis mean bad DVD try anther one or restore dvd on usb flash memory if it stopped before finish it is normal Link to comment Share on other sites More sharing options...
aarnis Posted August 23, 2010 Share Posted August 23, 2010 Hi, thanks for the guide. I installed snow leopard and windows 7 (same disk) , but i get blinking cursor. Windows 7 and snow leopard work fine if i boot from boot cd, but when i try chameleon blinking cursor came. And second problem: screen resolution is only 768x1024. I have ati 5870 and asus m4a87td sata3/usb3 motherboard. Thanks Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 23, 2010 Author Share Posted August 23, 2010 Hi, thanks for the guide. I installed snow leopard and windows 7 (same disk) , but i get blinking cursor. Windows 7 and snow leopard work fine if i boot from boot cd, but when i try chameleon blinking cursor came. And second problem: screen resolution is only 768x1024. I have ati 5870 and asus m4a87td sata3/usb3 motherboard. Thanks did you updated to 10.6.4 and grphics update 1.0 if not do them first boot with boot cd then apply updates and then open bootcd and go to extrafolder you will see dmg mount it go to extra /extensions you will find aty_init .kext copy it to desktop and setup it by kext helper there new way for GFX HD5XXX but use above method it is easy Link to comment Share on other sites More sharing options...
aarnis Posted August 24, 2010 Share Posted August 24, 2010 did you updated to 10.6.4 and grphics update 1.0if not do them first boot with boot cd then apply updates and then open bootcd and go to extrafolder you will see dmg mount it go to extra /extensions you will find aty_init .kext copy it to desktop and setup it by kext helper there new way for GFX HD5XXX but use above method it is easy thank you, now resolution i correct (1680x1050). Now i need to get my wireles network work (dwl-g510 rev c) but i try it myself. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 24, 2010 Author Share Posted August 24, 2010 thank you, now resolution i correct (1680x1050). Now i need to get my wireles network work (dwl-g510 rev c) but i try it myself. use this app to get devices id and take picture by grab and upload it to know chipset of wifi card Link to comment Share on other sites More sharing options...
aarnis Posted August 24, 2010 Share Posted August 24, 2010 use this app to get devices id and take picture by grab and upload it to know chipset of wifi card Device id: 0302 device: rt2561/rt61 it seems that there is no driver for rt61 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 24, 2010 Author Share Posted August 24, 2010 Device id: 0302 device: rt2561/rt61 it seems that there is no driver for rt61 please take snapshot by grap for devices by application i linked before Link to comment Share on other sites More sharing options...
aarnis Posted August 24, 2010 Share Posted August 24, 2010 please take snapshot by grap for devices by application i linked before Sory my bad english. You mean this? I open program you linked before, then i take screenshot and sent it to you? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 24, 2010 Author Share Posted August 24, 2010 Sory my bad english. You mean this? I open program you linked before, then i take screenshot and sent it to you? yes Link to comment Share on other sites More sharing options...
aarnis Posted August 24, 2010 Share Posted August 24, 2010 yes Here: http://img26.imageshack.us/img26/4360/screenshoteh.png Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 24, 2010 Author Share Posted August 24, 2010 Here: http://img26.imageshack.us/img26/4360/screenshoteh.png is this wifi card usb or pci Link to comment Share on other sites More sharing options...
aarnis Posted August 24, 2010 Share Posted August 24, 2010 is this wifi card usb or pci its pci. Dwl-g510 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 24, 2010 Author Share Posted August 24, 2010 its pci. Dwl-g510 no hope on that card atheros and braodcom is more comptable wifi cards for snow elopard Link to comment Share on other sites More sharing options...
aarnis Posted August 24, 2010 Share Posted August 24, 2010 no hope on that card atheros and braodcom is more comptable wifi cards for snow elopard Ok, thanks anyway. I must buy new card. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 24, 2010 Author Share Posted August 24, 2010 Ok, thanks anyway. I must buy new card. before you bought new one make sure it work out of box Link to comment Share on other sites More sharing options...
wesley8526 Posted August 26, 2010 Share Posted August 26, 2010 hi, i've been getting snow leopard to my pc for weeks.. and finally got some results.. here is my problem. I restored snow leopard 10.6.3 retail image to my external harddisk. first i using my graphic card which is ATI HD Radeon 4850 512MB and boot with the boot disk that you created. half way i get kernel panic, can't get in to installation screen. then i change my old graphic card Nvidia 9600 GSO, and it successfully get in to installation screen, i partitioned my 500gb harddisk and install without select printer support and language. after couple of minutes and nearly done, i got install failed, i check the installer log and it says unable to set os boot disk or something like that... since i saw your threads and you said it is normal, then i restart the pc... after restart i get CMOS checksum error... (every time restart after boot with your boot disk i'll get CMOS error ) and i reconfigured the bios settings and boot with the boot disk again and i successfully saw the welcome animation ... ok, i then restart and changed back HD4850, boot with -v i get THIS panic... Please help... 1) CMOS CHECKSUM ERROR 2) KERNEL PANIC FOR HD4850 GRAPHIC CARD My Motherboard: GIGABYTE GA-MA69G-S3H Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 26, 2010 Author Share Posted August 26, 2010 hi, i've been getting snow leopard to my pc for weeks.. and finally got some results.. here is my problem. I restored snow leopard 10.6.3 retail image to my external harddisk. first i using my graphic card which is ATI HD Radeon 4850 512MB and boot with the boot disk that you created. half way i get kernel panic, can't get in to installation screen. then i change my old graphic card Nvidia 9600 GSO, and it successfully get in to installation screen, i partitioned my 500gb harddisk and install without select printer support and language. after couple of minutes and nearly done, i got install failed, i check the installer log and it says unable to set os boot disk or something like that... since i saw your threads and you said it is normal, then i restart the pc... after restart i get CMOS checksum error... (every time restart after boot with your boot disk i'll get CMOS error ) and i reconfigured the bios settings and boot with the boot disk again and i successfully saw the welcome animation ... ok, i then restart and changed back HD4850, boot with -v i get THIS panic... Please help... 1) CMOS CHECKSUM ERROR 2) KERNEL PANIC FOR HD4850 GRAPHIC CARD My Motherboard: GIGABYTE GA-MA69G-S3H first about cmos reset is more common in gigabypte MB USE this kext kernel panic of HD4850 YOU need boot file for your card or enabler i dont have HD4xxx so you need search for enabler for your card and you need many tries try this hope it work but setup it with nvida card then put ati card good luck http://www.insanelymac.com/forum/index.php?showtopic=177095# see that Link to comment Share on other sites More sharing options...
wesley8526 Posted August 26, 2010 Share Posted August 26, 2010 thanks for reply... i've been trying all day... still no luck... and another problem now... okay, so since nothing to do with hd4850 yet, i was using nvidia card for setup, updated to 10.6.4, setup chamelon, copy boot.plist (with flag busratio=16) to extra folder, setup legacy kernel and install fakesmc.kext... after all these i reboot into chameleon boot loader, i use -v and press enter, i got following message then restart... ___________________________ bla bla.... No SMBIOS replacement found Patched DMI Table ACPI Table not found : DSDT.aml No DSDT found, using 0 as uid value. Using PCI-Root-UID value : 0 Patched DMI Table Found SMBIOS System Information Table 1 Customizing SystemID with : 30303144-3744-4436-3745-....... efi_inject_get_devprop+string NULL trying stringdata Patched DMI Table ACPI Table not fond : DSDT.aml Couldn't find table DSDT.aml Starting Darwin x86_64 ___________________________ and restart... it seems something not right with DSDT.aml Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 26, 2010 Author Share Posted August 26, 2010 thanks for reply... i've been trying all day... still no luck... and another problem now... okay, so since nothing to do with hd4850 yet, i was using nvidia card for setup, updated to 10.6.4, setup chamelon, copy boot.plist (with flag busratio=16) to extra folder, setup legacy kernel and install fakesmc.kext... after all these i reboot into chameleon boot loader, i use -v and press enter, i got following message then restart... ___________________________ bla bla.... No SMBIOS replacement found Patched DMI Table ACPI Table not found : DSDT.aml No DSDT found, using 0 as uid value. Using PCI-Root-UID value : 0 Patched DMI Table Found SMBIOS System Information Table 1 Customizing SystemID with : 30303144-3744-4436-3745-....... efi_inject_get_devprop+string NULL trying stringdata Patched DMI Table ACPI Table not fond : DSDT.aml Couldn't find table DSDT.aml Starting Darwin x86_64 ___________________________ and restart... it seems something not right with DSDT.aml type busratio=16 -v if not work arch=i386 busratio=16 -v Link to comment Share on other sites More sharing options...
Recommended Posts