dingfelder Posted November 12, 2010 Share Posted November 12, 2010 bump... any thoughts? Link to comment Share on other sites More sharing options...
el coniglio Posted November 13, 2010 Author Share Posted November 13, 2010 @dingfelder It doesn't mean you cannot run SL on it. It is always worth a try, even when more critical hardware show a sad face. I say this because the database is generated from users contributions (a lot of people have contributed but there are A LOT of hardware around), and some hardware really doesn't have a "kext" to relate with. =) Link to comment Share on other sites More sharing options...
ppafford Posted November 29, 2010 Share Posted November 29, 2010 Are there any efforts to port this to Linux? Would like to be involved in that effort if exsists Link to comment Share on other sites More sharing options...
el coniglio Posted November 29, 2010 Author Share Posted November 29, 2010 Are there any efforts to port this to Linux? Would like to be involved in that effort if exsists It is pretty simple to port it to linux, just add a OS check and call the right "system parsing" class. On windows it collects data from registry, on linux it will open a thread with lspci and parse the output. The app (communication / interface) is written in java so it just depend on jre. Link to comment Share on other sites More sharing options...
hoob Posted November 30, 2010 Share Posted November 30, 2010 It is pretty simple to port it to linux, just add a OS check and call the right "system parsing" class. On windows it collects data from registry, on linux it will open a thread with lspci and parse the output. The app (communication / interface) is written in java so it just depend on jre. in hackintosh-hardware-analyser-1.0.9.sh i have this short code, already works on ubuntu 9.1 & 10.04 sudo aptitude install default-jre download from http://www.insanelymac.com/forum/index.php?showtopic=223205 chmod 755 iasl-linux dsdtparser.jar sudo java -jar dsdtparser.jar same result as windows, but less than osx (no kext association with pciids) Link to comment Share on other sites More sharing options...
el coniglio Posted November 30, 2010 Author Share Posted November 30, 2010 in hackintosh-hardware-analyser-1.0.9.sh i have this short code, already works on ubuntu 9.1 & 10.04 sudo aptitude install default-jre download from http://www.insanelymac.com/forum/index.php?showtopic=223205 chmod 755 iasl-linux dsdtparser.jar sudo java -jar dsdtparser.jar same result as windows, but less than osx (no kext association with pciids) Well, he is talking about System Info, not DSDT Editor. System Info won't work on linux since it use the windows registry to collect the system hardware data. oldnapalm sent me the lspci output, tomorrow I'll code a parser for it and make a system check in the app. Link to comment Share on other sites More sharing options...
hoob Posted November 30, 2010 Share Posted November 30, 2010 oopps (open my eyes) sorry but good new, finaly Link to comment Share on other sites More sharing options...
el coniglio Posted November 30, 2010 Author Share Posted November 30, 2010 Original post updated with a linux version (depends on jre and "lspci"). Please test. =) Link to comment Share on other sites More sharing options...
ppafford Posted November 30, 2010 Share Posted November 30, 2010 Download Link for the Linux version? Link to comment Share on other sites More sharing options...
el coniglio Posted November 30, 2010 Author Share Posted November 30, 2010 Download Link for the Linux version? End of post #1 Link to comment Share on other sites More sharing options...
ppafford Posted December 1, 2010 Share Posted December 1, 2010 Thanks! After testing with your script I can see all my compatible hardware with smilies or checks, I do also see some frown faces. But the kexts tab is not enabled, how do I see what kexts I should use? Link to comment Share on other sites More sharing options...
el coniglio Posted December 1, 2010 Author Share Posted December 1, 2010 [...] But the kexts tab is not enabled, how do I see what kexts I should use? The tab isn't enabled b/c a hardware item has been stated as working with many kext versions (and OS, since the system differ SL and Leo). If you want to view the listing to verify if they are "native" or 3rd party you can do this in the web interface http://olarila.com/kexts/ Link to comment Share on other sites More sharing options...
scrax Posted December 10, 2010 Share Posted December 10, 2010 Are you sure? Because the ioregistryexplorer device Ids are not the one i get from system info, but wait, in the ioreg result they are not changed (by DSDT injection)... uhm I'm a bit confused, and so I can't explain well what is happening so i'll attach all my stuff so you can check it by yourself if it could be useful for this project In the result.txt i've put, the info you asked from ioreg, plus the actual lspci -nn (it shows the original ID not the ones modded by DSDT ones) results.txt.zip scraxZotac.ioreg.zip Last note, in IORegistryExplorer 980a is not inverted DSDT part relative to TRIM: Device (TRIM) { Name (_ADR, 0x00030004) } (yes nothing more ) Any progress on this issue? if needed I can provide more fedback for now this is the situation Link to comment Share on other sites More sharing options...
kalmdave Posted December 12, 2010 Share Posted December 12, 2010 Superb application. Can' use it on my Leopard 10.5.8 says, "No compatible version of Java 1.6+ is available" It worked on Windows 7 Enterprise 32bit. Regards. Link to comment Share on other sites More sharing options...
sir_bazz Posted December 27, 2010 Share Posted December 27, 2010 Nice little utility....details sent! bazz. Link to comment Share on other sites More sharing options...
dino7777 Posted December 29, 2010 Share Posted December 29, 2010 Hello, nice and useful app. Data send for G33M-SL2 mobo, with nVidia 9800GT. Sound, sleep, dual-display, bonjour, ... all working. Link to comment Share on other sites More sharing options...
PGHammer Posted March 4, 2011 Share Posted March 4, 2011 Hello, nice and useful app. Data send for G33M-SL2 mobo, with nVidia 9800GT. Sound, sleep, dual-display, bonjour, ... all working. I did the same for the Hack side of my ASUS P5G41-M LX2/GB (everything works in 10.6.6 except HDMI-out, which is a VoodooHDA-specific issue that did *not* happen with earlier versions) - I hung an otherwise-shelved Sound Blaster Audigy (supported by kX Project 1.30 for OS X, and works fine) to handle the audio duties (as opposed to my X-Fi XtremeGamer, which is not supported by OS X in any way, but is used on the Windows side; the two sound cards split duty in the same PCI slot). Graphics - VisionTek AMD HD5450 512MB PCIe (yes, it works, and with full QE/CI no less - I have even installed Steam for Mac on it). Display - Acer H233H.bmid (properly detected) Audio works, as does video (iDVD and iTunes both work, as does VLC). So does the MacAppStore (I've downloaded NovaBench, Kindle for Mac, and two free games from the MAS already). Networking? Definitely working (Realtek 8111D driver has never failed me - also, Tenda WG311U wireless-N stick works just fine using the factory OS X drivers). Firefox 4 beta 12 (not Safari) is my default browser with this kitty (and it will likely remain that way due to the Apple/Adobe "armed truce" and Google having their own issues with Adobe file formats, and I loathe Opera). In addition to the two free games and Portal (remember, I have installed Steam, and Portal was a game I already owned), I've also hung Bejeweled 3 (another multiplatform title I own) on the Hack side of things (it was the first game I'd played in Snow since I got my CI/QE working). I also have Office for Mac *reinstalled* (an old friend that I used in Leopard). So far, I have no real *software* issues. Link to comment Share on other sites More sharing options...
hackaroni Posted March 20, 2011 Share Posted March 20, 2011 Thanks, this app worked great for me on 10.5.8 GA-G31M-S2L mobo Much appreciated! Link to comment Share on other sites More sharing options...
Time2Retire Posted March 25, 2011 Share Posted March 25, 2011 Amazing. This is exactly what I was looking for. What a great little handy tool. Very cool app!!!!! Thanks you so much! Link to comment Share on other sites More sharing options...
ifrit05 Posted April 4, 2011 Share Posted April 4, 2011 Great app! Sent my info (dc7600 P4 HT 3GHz LGA775), All kexts and devices are working. Thanks for such a nice and well developed app. Link to comment Share on other sites More sharing options...
Larx Posted April 12, 2011 Share Posted April 12, 2011 Incredible app! Thank you so much !!! Link to comment Share on other sites More sharing options...
Ricardo Simões Posted May 11, 2011 Share Posted May 11, 2011 Great work! Thanks to you, I got the info that I needed, and bought a compatible wireless card for my notebook Link to comment Share on other sites More sharing options...
Ricardo Simões Posted May 26, 2011 Share Posted May 26, 2011 Please take a look at the screenshots below. They belong to my wife's notebook. I ran the systeminfo win version. Please help me interpret the results... does the means that it can run Mac OS? Or si it necessary to have all green checkmarks? Another windows hardware report below (might help in some way). Link to comment Share on other sites More sharing options...
oldnapalm Posted May 26, 2011 Share Posted May 26, 2011 You can find the icons meaning in this topic http://www.insanelymac.com/forum/index.php?showtopic=223870 About your video, even it being listed with a green check, I'm almost sure it's not supported. Maybe someone reported a kext which enables resolution change or something, but you won't have acceleration with this card. Link to comment Share on other sites More sharing options...
Extremador Posted June 1, 2011 Share Posted June 1, 2011 Data sent to servers. User Dellmantt told me to post here because I apparently do not have the kexts for my IDE controller, so I can't use my IDE hard drives at all. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts