valv Posted January 12, 2011 Author Share Posted January 12, 2011 1) yes it is really necessary. 2) not directly; the sound issue is somehow related to bad bioses and/or bad fsb values. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 16*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 16 maxdiv: 1, currdiv: 2 min_freq: 800, max_freq: 3200 fsb: 200 min_ratio: 4 P-State 0: Frequency: 3200, Multiplier: 160, vid: 16 P-State 1: Frequency: 1800, Multiplier: 9, vid: 24 P-State 2: Frequency: 1000, Multiplier: 5, vid: 32 P-State 3: Frequency: 800, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=160, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3210MHz CPU: CPUFreq: 3200MHz CPU: FSBFreq: 200MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 16.5*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 17 maxdiv: 1, currdiv: 2 min_freq: 825, max_freq: 3300 max_multi (corrected): 16.5 fsb: 200 min_ratio: 4 P-State 0: Frequency: 3300, Multiplier: 165, vid: 16 P-State 1: Frequency: 1800, Multiplier: 9, vid: 24 P-State 2: Frequency: 1000, Multiplier: 5, vid: 32 P-State 3: Frequency: 800, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=165, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3311MHz CPU: CPUFreq: 3400MHz CPU: FSBFreq: 200MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 16.5*210 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 17 maxdiv: 1, currdiv: 2 min_freq: 825, max_freq: 3300 max_multi (corrected): 16.5 fsb: 210 min_ratio: 3 P-State 0: Frequency: 3465, Multiplier: 165, vid: 16 P-State 1: Frequency: 1890, Multiplier: 9, vid: 24 P-State 2: Frequency: 1050, Multiplier: 5, vid: 32 P-State 3: Frequency: 630, Multiplier: 3, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=165, min=30 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3465MHz CPU: CPUFreq: 3570MHz CPU: FSBFreq: 210MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 17*210 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 18 maxdiv: 1, currdiv: 2 min_freq: 850, max_freq: 3400 max_multi (corrected): 17 fsb: 210 min_ratio: 4 P-State 0: Frequency: 3570, Multiplier: 170, vid: 16 P-State 1: Frequency: 1890, Multiplier: 9, vid: 24 P-State 2: Frequency: 1050, Multiplier: 5, vid: 32 P-State 3: Frequency: 840, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=170, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3570MHz CPU: CPUFreq: 3780MHz CPU: FSBFreq: 210MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 @Mohamed, this one looks better. One problem remaining though: I don't want frequency to go below the 800 limit. Try the one I've sent you (when you time have) Link to comment Share on other sites More sharing options...
humph Posted January 12, 2011 Share Posted January 12, 2011 Valv, Further to your note on page 59 and the issue of memory detection (not) working vs Kabyls; finally got around to getting the info. Although I see you are now onto much more exciting stuff! Recall am unable to run bdmesg as Atom32bit, so here's Linux dumps instead. (Note: Booted with version 5.1.2: S12_Info.zip Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 alright dear humph, I'll study things further and try fixing it (on next release...probably ) Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 17*210 CPU: AMD Phenom(tm) II X4 955 Processor fsb: 210 max_multi: 17 min_ratio: 4 P-State 0: Frequency: 3570, Multiplier: 17, vid: 294746 P-State 1: Frequency: 1890, Multiplier: 9, vid: 24 P-State 2: Frequency: 1050, Multiplier: 5, vid: 32 P-State 3: Frequency: 1050, Multiplier: 5, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=170, min=50 CPU: MaxDiv/CurrDiv: 0x0/0x2 CPU: TSCFreq: 3570MHz CPU: CPUFreq: 3570MHz CPU: FSBFreq: 210MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 16.5*200 CPU: AMD Phenom(tm) II X4 955 Processor fsb: 200 max_multi: 16.5 min_ratio: 4 P-State 0: Frequency: 3300, Multiplier: 16, vid: 305524 P-State 1: Frequency: 1800, Multiplier: 9, vid: 24 P-State 2: Frequency: 1000, Multiplier: 5, vid: 32 P-State 3: Frequency: 1000, Multiplier: 5, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=165, min=50 CPU: MaxDiv/CurrDiv: 0x1/0x2 CPU: TSCFreq: 3311MHz CPU: CPUFreq: 3300MHz CPU: FSBFreq: 200MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 crazy values still Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 crazy values still where just ps 3 that i can see if there are hidden values tell me Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 latest frequency (should not equal its predecessor) and first vid Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 latest frequency (should not equal its predecessor) and first vid 16.5*200 CPU: AMD Phenom(tm) II X4 955 Processor fsb: 200 multi: max:16.5, min:4 P-State 0: Frequency: 3300, Multiplier: 16.5, vid: 16 P-State 1: Frequency: 1800, Multiplier: 9, vid: 24 P-State 2: Frequency: 1000, Multiplier: 5, vid: 32 P-State 3: Frequency: 800, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=165, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x2 CPU: TSCFreq: 3311MHz CPU: CPUFreq: 3300MHz CPU: FSBFreq: 200MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 17*210 CPU: AMD Phenom(tm) II X4 955 Processor fsb: 210 multi: max:17 min:4 P-State 0: Frequency: 3570, Multiplier: 17, vid: 16 P-State 1: Frequency: 1890, Multiplier: 9, vid: 24 P-State 2: Frequency: 1050, Multiplier: 5, vid: 32 P-State 3: Frequency: 840, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=170, min=40 CPU: MaxDiv/CurrDiv: 0x0/0x2 CPU: TSCFreq: 3570MHz CPU: CPUFreq: 3570MHz CPU: FSBFreq: 210MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 not bad! what do u think ? Also, for you guyz that got hassle with sound and bad FSB (hannibal, wojnar...). Am actually backing a new version and highly appreciate beta-testers. If interested, send me a pm and I'll give you link for the file to test. Thanks. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 Indeed, I love this maxdiv thingy showing around nifty! isn't it ? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 Indeed, I love this maxdiv thingy showing around nifty! isn't it ? Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 one last thing though... please take a look to see if kernel is not actually wining after tsc or so. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 one last thing though... please take a look to see if kernel is not actually wining after tsc or so. using which kernel one you made or usual one this with 10.6 usual Jan 12 19:33:35 localhost kernel[0]: npvhash=4095 Jan 12 19:33:35 localhost kernel[0]: PAE enabled Jan 12 19:33:35 localhost kernel[0]: 64 bit mode enabled Jan 12 19:33:35 localhost kernel[0]: rtclock_init: Taking bus ratio path 3 (AMD Phenom) Jan 12 19:33:35 localhost kernel[0]: rtclock_init: Phenom MSR 0xc0010071 returned: 0x80000048002012 Jan 12 19:33:35 localhost kernel[0]: TSC: Reported FSB: 420.0000MHz, corrected FSB: 446.268105MHz Jan 12 19:33:35 localhost kernel[0]: TSC: Verification of clock speed failed. Fallback correction was performed. Please upgrade bootloader. Jan 12 19:33:35 localhost kernel[0]: TSC: Frequency = 3570.144840MHz, FSB frequency = 446.268105MHz, bus ratio = 8 Jan 12 19:33:35 localhost kernel[0]: Darwin Kernel Version 10.6.0: Sun Jan 9 16:31:48 EST 2011; legacy kernel v6 :xnu-1504.9.26/BUILD/obj/RELEASE_I386 Link to comment Share on other sites More sharing options...
.picodev Posted January 12, 2011 Share Posted January 12, 2011 Step by step,getting close Following your topic. Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 @Mohamed, what about the one I made ? @hausbox, glad to see you here Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 what about the one I made ? CPU: AMD Phenom(tm) II X4 955 Processor fsb: 210 multi: max:17 min:4 P-State 0: Frequency: 3570, Multiplier: 17, vid: 16 P-State 1: Frequency: 1890, Multiplier: 9, vid: 24 P-State 2: Frequency: 1050, Multiplier: 5, vid: 32 P-State 3: Frequency: 840, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=170, min=40 CPU: MaxDiv/CurrDiv: 0x0/0x2 CPU: TSCFreq: 3570MHz CPU: CPUFreq: 3570MHz CPU: FSBFreq: 210MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 Jan 12 19:41:29 localhost kernel[0]: npvhash=4095 Jan 12 19:41:29 localhost kernel[0]: PAE enabled Jan 12 19:41:29 localhost kernel[0]: 64 bit mode enabled Jan 12 19:41:29 localhost kernel[0]: rtclock_init: Taking bus ratio path 3 (AMD Phenom) Jan 12 19:41:29 localhost kernel[0]: rtclock_init: Phenom MSR 0xc0010071 returned: 0x80000048002012 Jan 12 19:41:29 localhost kernel[0]: TSC: Reported FSB: 210.0000MHz, corrected FSB: 223.133230MHz Jan 12 19:41:29 localhost kernel[0]: TSC: Verification of clock speed failed. Fallback correction was performed. Please upgrade bootloader. Jan 12 19:41:29 localhost kernel[0]: TSC: Frequency = 3570.131682MHz, FSB frequency = 223.133230MHz, bus ratio = 16 Jan 12 19:41:29 localhost kernel[0]: Darwin Kernel Version 10.5.0: Tue Jan 11 00:11:22 CET 2011; annappirtrvh v4 :xnu-1504.9.17/BUILD/obj/RELEASE_I386 we should make kernel trust on bootloader Link to comment Share on other sites More sharing options...
anibalin Posted January 12, 2011 Share Posted January 12, 2011 Hi anv Do you happen to know what this error is? Error - bad display config block signature (0xff45dfff) (it was addressed here too: http://forge.voodooprojects.org/p/chameleon/issues/48/ ) Using a gtx460 Thanks in advance for any hint. Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 we should make kernel trust on bootloader dunno,maybe stick with tsc freq for first p-state. But then, it is going to yell about fsb. MODERATORS, MODERATORS, there is one guy here that doesn't seem to like studying. Plus he spends the whole time on IM. Please, if you are reading me suspend his account till tomorrow. Or even better, ban him. oops, forgot to mention his name: Mohamed Khairy Link to comment Share on other sites More sharing options...
denzel Posted January 12, 2011 Share Posted January 12, 2011 a valv With all your version, always i have that problem with my q6600, but only your loader Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 I see, can you give me a bdmesg from an actual working boot-loader? Link to comment Share on other sites More sharing options...
denzel Posted January 12, 2011 Share Posted January 12, 2011 Hi valv, great work, but i have a problem with my q6600 and asus p5q pro. With all other loader the cstates and pstates are generate well, but with your boot doesn't and so the ps restart always. Thia happen both in overclock and to default frequency Last login: Tue Jan 11 15:46:38 on console /Users/bush/chameleon/branches/valv/sym/i386/bdmesg ; exit; Mac-Pro-di-bush:~ bush$ /Users/bush/chameleon/branches/valv/sym/i386/bdmesg ; exit; msr(221): ia32_perf_stat 0x06000928 max: 9 current: 9 CPU: Vendor/Model/ExtModel: 0x756e6547/0xf/0x0 CPU: Family/ExtFamily: 0x6/0x0 CPU: MaxCoef/CurrCoef: 0x9/0x9 CPU: MaxDiv/CurrDiv: 0x0/0x0 CPU: TSCFreq: 3410MHz CPU: FSBFreq: 378MHz CPU: CPUFreq: 3410MHz CPU: NoCores/NoThreads: 4/4 CPU: Features: 0x0000024f Failed to find boot signature on BIOS device a0h Read HFS+ file: [hd(32,0)/Extra/Preboot.dmg] 19103744 bytes. reading ramdisk image: bt(0,0)/Extra/Preboot.dmgAttempting to read GPT Read GPT Reading GPT partition 1, type 48465300-0000-11AA-AA11-00306543ECAC no ramdisk config... mounting: done Read HFS+ file: [hd(32,0)/Extra/com.apple.Boot.plist] 696 bytes. Read HFS+ file: [hd(32,0)/Extra/modules/Symbols.dylib] 24788 bytes. Read HFS+ file: [hd(32,0)/Extra/modules/Memory.dylib] 34988 bytes. Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 Reading GPT partition 3, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 Reading GPT partition 4, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 3, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 4, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 5, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 6, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 7, type 48465300-0000-11AA-AA11-00306543ECAC Reading GPT partition 8, type 48465300-0000-11AA-AA11-00306543ECAC Attempting to read GPT Read GPT Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B Reading GPT partition 2, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 Reading GPT partition 3, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 Reading GPT partition 4, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 Reading GPT partition 5, type 48465300-0000-11AA-AA11-00306543ECAC Read HFS+ file: [hd(32,0)/Extra/Themes/bush/theme.plist] 2789 bytes. Found mode 1280x1024 in VESA Table Read HFS+ file: [hd(32,0)/Extra/Themes/bush/background.png] 966 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/logo.png] 2642 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_generic.png] 22700 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_generic_o.png] 22748 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_hfsplus.png] 25968 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_hfsplus_o.png] 25971 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_hfsraid.png] 26603 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_hfsraid_o.png] 26565 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_ext3.png] 25554 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_ext3_o.png] 25561 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_fat.png] 24399 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_fat_o.png] 24429 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_ntfs.png] 27227 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_ntfs_o.png] 27197 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_cdrom.png] 23564 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_cdrom_o.png] 22930 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_selection.png] 454 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_scroll_prev.png] 4566 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/device_scroll_next.png] 4381 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_boot.png] 182 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_verbose.png] 182 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_ignore_caches.png] 182 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_single_user.png] 182 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_memory_info.png] 180 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_video_info.png] 180 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_help.png] 180 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_verbose_disabled.png] 187 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_ignore_caches_disabled.png] 187 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_single_user_disabled.png] 187 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/menu_selection.png] 236 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/progress_bar.png] 349 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/progress_bar_background.png] 179 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/text_scroll_prev.png] 632 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/text_scroll_next.png] 650 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/font_console.png] 3499 bytes. Read HFS+ file: [hd(32,0)/Extra/Themes/bush/font_small.png] 5525 bytes. Read HFS+ file: [hd(1,5)/System/Library/CoreServices/SystemVersion.plist] 479 bytes. Read HFS+ file: [hd(32,0)/Extra/com.apple.Boot.plist] 696 bytes. Setting boot-uuid to: 5FD1AD5C-438E-39C2-9C54-BB303BCA7D77 Hibernate image is too old by 2162756 seconds. Use ForceWake=y to override. Loading Darwin 10.6 Loading kernel mach_kernel Read HFS+ file: [hd(1,5)/mach_kernel] 4096 bytes. Read HFS+ file: [hd(1,5)/mach_kernel] 5579907 bytes. LoadDrivers: Loading from [bt(0,0)/Extra/Extensions.mkext] Read HFS+ file: [hd(32,0)/Extra/Extensions.mkext] 4096 bytes. Read HFS+ file: [hd(32,0)/Extra/Extensions.mkext] 3723947 bytes. LoadDrivers: Loading from [/system/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext] Read HFS+ file: [hd(1,5)/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext] 4096 bytes. Read HFS+ file: [hd(1,5)/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext] 4174382 bytes. No SMBIOS replacement provided. Intel P45/G45 DRAM Controller [8086:2e20] at 00:00.0 Frequency detected: 378 MHz (757) Dual Channel CAS:5 tRC:5 tRP:5 RAS:15 (5-5-5-15) Slot: 0 Type 19 2048MB (DDR2 SDRAM) 757MHz Vendor=Kingston PartNo=2G-UDIMM SerialNo=7E1B143A Slot: 1 Type 19 2048MB (DDR2 SDRAM) 757MHz Vendor=Kingston PartNo=9905316-132.A00LF SerialNo=A81C0B08 Slot: 2 Type 19 2048MB (DDR2 SDRAM) 757MHz Vendor=Kingston PartNo=2G-UDIMMt SerialNo=741BD716 Slot: 3 Type 19 2048MB (DDR2 SDRAM) 757MHz Vendor=Kingston PartNo= SerialNo=A0CC3671 CPU is Intel® Core(tm)2 Quad CPU @ 2.40GHz, family 0x6, model 0xf Patched DMI Table Found SMBIOS System Information Table 1 Customizing SystemID with : 00020003-0004-0005-0006-000700080009 Read HFS+ file: [hd(32,0)/Extra/DSDT.aml] 5907 bytes. FADT: Restart Fix applied! FADT: Using custom DSDT! FADT: Restart Fix applied! FADT: Using custom DSDT! Starting Darwin x86_64 Press a key to continue... logout Here Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 Here sorry!Got tired. Think I need to rest for a while Link to comment Share on other sites More sharing options...
Recommended Posts