00diabolic Posted July 14, 2010 Share Posted July 14, 2010 no problem.btw, first post updated and latest build download link added Same as 4b right or did you make any additional changes? Also I have been doing some searching and noticed people talking about SSDT tables. They are specific to your CPU. I have all my ACPI tabes extracted and have 4 SSDT tables. Anyway do you know if my FSB value is in there somewhere? If it is I can edit it and ad that to your boot-loader and have my 800fsb instead of 736. Let me know and if you know where the FSB is in the SSDT Lenovo_n200_SSDT_tables.zip Link to comment Share on other sites More sharing options...
Nghia Developer Posted July 14, 2010 Share Posted July 14, 2010 valv, can you add GUI support to boot please? Thank you! I love you. Link to comment Share on other sites More sharing options...
valv Posted July 14, 2010 Author Share Posted July 14, 2010 Let me know and if you know where the FSB is in the SSDTnot directly. the values u can change are cpu frequencies for each state (cpu freq≈ fsb freq x actual multiplier). u 'd find those freqs onto the _pss section. valv, can you add GUI support to boot please? Thank you! I love you.u 're welcome. it is already there, unless u mean a pkg installer. Link to comment Share on other sites More sharing options...
00diabolic Posted July 14, 2010 Share Posted July 14, 2010 not directly. the values u can change are cpu frequencies for each state (cpu freq≈ fsb freq x actual multiplier). u 'd find those freqs onto the _pss section. Damn I was afraid of that. I see the PSS section in SSDT-2 and below that is TSSI section which looks like speedsteps. If I was to alter this to compensate for the FSB being 736 would it work or be problematic? I might look into doing this but also dont wanna end up with random Kps from it. Let me know what you think. THanks for the advice. Link to comment Share on other sites More sharing options...
XLR Posted July 14, 2010 Share Posted July 14, 2010 AnVal 2010-07-13 Installer.pkg - attached. Even installs to USB ............... no Extras etc. included, only pure boot-loader installer tested, working After reboot it doesn't gets past this screen: Tried it right now on a fresh OSX 10.6.3 retail installation, there was no other bootloader previously installed. EDIT: Manual installation from Terminal works fine, so there must be something wrong with your installer. Link to comment Share on other sites More sharing options...
jlvaio Posted July 15, 2010 Share Posted July 15, 2010 @valv hi dear about sny5001 i 've found this link from linux that give sources of a tool for vaio acpi they do not talk about internal screen do you think possible to add something to your bootloader with this sources? http://vaio-utils.org/power/ thanks Link to comment Share on other sites More sharing options...
DieBuche Posted July 16, 2010 Share Posted July 16, 2010 Hey valv i'm putting together a new build, and I still had a Ati 3650HD floating around. So I tried your bootloader, but no matter whether I use GE or not, PciRoot=1 or =0, it just doesn't want to work. KP's with the x2000.kext. Tried with 10.6.0 and 10.6.4, fakesmc 2.5 and modded DSDT. Any pointers? It'd be cool to be able to use the card i have and not to have to buy a new one. Cheers, DieBuche Link to comment Share on other sites More sharing options...
valv Posted July 16, 2010 Author Share Posted July 16, 2010 Hey valv i'm putting together a new build, and I still had a Ati 3650HD floating around. So I tried your bootloader, but no matter whether I use GE or not, PciRoot=1 or =0, it just doesn't want to work. KP's with the x2000.kext. Tried with 10.6.0 and 10.6.4, fakesmc 2.5 and modded DSDT. Any pointers? It'd be cool to be able to use the card i have and not to have to buy a new one. Cheers, DieBuche DieBuche, am working on a new version (shhhhhh!), and I 'd be glad to see your issue fixed. let me do some research.edit: is this specific to AnVAL or didn't it work with trunk neither? Greetz Link to comment Share on other sites More sharing options...
kizwan Posted July 17, 2010 Share Posted July 17, 2010 DieBuche, am working on a new version (shhhhhh!), and I 'd be glad to see your issue fixed. let me do some research.edit: is this specific to AnVAL or didn't it work with trunk neither? Greetz Whispering(New version already? This is great! ) I believe (in DieBuche case) X2000 kext panic also occurred with original chameleon too. On some machine X2000 kext tend to panic. I don't know why though. Could be this caused by wrong PCI bus enumeration (I don't know if I ask the right question)? @DieBuche, have you tried patched version of IOPCIFamily.kext? Link to comment Share on other sites More sharing options...
rednous Posted July 17, 2010 Share Posted July 17, 2010 valv, cheers im impatient to test the upcoming build Link to comment Share on other sites More sharing options...
rednous Posted July 17, 2010 Share Posted July 17, 2010 Hey valv i'm putting together a new build, and I still had a Ati 3650HD floating around. So I tried your bootloader, but no matter whether I use GE or not, PciRoot=1 or =0, it just doesn't want to work. KP's with the x2000.kext. Tried with 10.6.0 and 10.6.4, fakesmc 2.5 and modded DSDT. Any pointers? It'd be cool to be able to use the card i have and not to have to buy a new one. Cheers, DieBuche maybe this thread (233 pages) could be of use to you: ATI Radeon HD pkg installers 10.5.x & 10.6, Easy to install !! 10.6 pkgs coming soon! also i read somewhere that x2000.kext gives KP's as you said and should be deleted... Link to comment Share on other sites More sharing options...
valv Posted July 17, 2010 Author Share Posted July 17, 2010 pre-alpha: custom FSB injection boot.plist key: ForceFSB (just like the busratio key: u input the value u like) EDIT: file is now obseleted Link to comment Share on other sites More sharing options...
JBraddock Posted July 17, 2010 Share Posted July 17, 2010 Ok it works as long as I do not pass any other variables at the boot prompt. If I add the verbose mode -v to it it loads the default dsdt. Thanks EDITED: I can pass the -v option but have to pass it first then the DSDT=<file> override 2nd. If I reverse it, it loads the default dsdt. I witnessed the same behaviour. Link to comment Share on other sites More sharing options...
rednous Posted July 17, 2010 Share Posted July 17, 2010 valv, ready to test it just tell me how to implement/ test this custom FSB injection? Link to comment Share on other sites More sharing options...
valv Posted July 17, 2010 Author Share Posted July 17, 2010 valv, ready to test it just tell me how to implement/ test this custom FSB injection? u put a new key named ForceFSB onto boot.plist, and pass an fsb value (something like 266). That's all. Link to comment Share on other sites More sharing options...
rednous Posted July 17, 2010 Share Posted July 17, 2010 thanx, valv report with AnVAL5 pre alpha: with FixFSB=Yes, ForceFSB=266, busratio=110 --> sound is OK sysctl -a | grep freq hw.busfrequency = 1064000000 hw.cpufrequency = 2933000000 hw.tbfrequency = 1000000000 hw.busfrequency: 1064000000 hw.busfrequency_min: 1064000000 hw.busfrequency_max: 1066666668 hw.cpufrequency: 2933000000 hw.cpufrequency_min: 2933000000 hw.cpufrequency_max: 2933000000 hw.tbfrequency: 1000000000 with FixFSB=No, ForceFSB=266, busratio=110 --> sound is OK sysctl -a | grep freq hw.busfrequency = 1064000000 hw.cpufrequency = 2933000000 hw.tbfrequency = 1000000000 hw.busfrequency: 1064000000 hw.busfrequency_min: 1064000000 hw.busfrequency_max: 1066716132 hw.cpufrequency: 2933000000 hw.cpufrequency_min: 2933000000 hw.cpufrequency_max: 2933000000 hw.tbfrequency: 1000000000 so far everything seems OK, also no sound glitches as with previous alphas. CPU FSB is set to 266MHz and the frequency multiplier is set to 11 in my BIOS. should you need more testing options just tell me Link to comment Share on other sites More sharing options...
valv Posted July 17, 2010 Author Share Posted July 17, 2010 should you need more testing options just tell me Dear rednous, thank u for the feedback. would u mind decreasing the FSB value to 233 and FixFSB=No, just to see if it really works. Link to comment Share on other sites More sharing options...
rednous Posted July 17, 2010 Share Posted July 17, 2010 valv, yep: with FixFSB=No, ForceFSB=233, busratio=110 (CPU FSB=233 and Multiplier=11 set in BIOS) sysctl -a | grep freq hw.busfrequency = 932000000 hw.cpufrequency = 2563000000 hw.tbfrequency = 1000000000 hw.busfrequency: 932000000 hw.busfrequency_min: 932000000 hw.busfrequency_max: 932099064 hw.cpufrequency: 2563000000 hw.cpufrequency_min: 2563000000 hw.cpufrequency_max: 2563000000 hw.tbfrequency: 1000000000 with FixFSB=No, ForceFSB=233, busratio=110 (CPU FSB=266 and Multiplier=11 set in BIOS) sysctl -a | grep freq hw.busfrequency = 1064000000 hw.cpufrequency = 2929000000 hw.tbfrequency = 1000000000 hw.busfrequency: 1064000000 hw.busfrequency_min: 1064000000 hw.busfrequency_max: 1065289600 hw.cpufrequency: 2929000000 hw.cpufrequency_min: 2929000000 hw.cpufrequency_max: 2929000000 hw.tbfrequency: 1000000000 Link to comment Share on other sites More sharing options...
valv Posted July 17, 2010 Author Share Posted July 17, 2010 valv, yep:in fact. it seems to stick-in. Thank u valorous friend Link to comment Share on other sites More sharing options...
rednous Posted July 17, 2010 Share Posted July 17, 2010 nice to hear it. if you need more tests im ready EDIT: im curious what Diabolic will report with this new release Link to comment Share on other sites More sharing options...
valv Posted July 17, 2010 Author Share Posted July 17, 2010 EDIT: im curious what Diabolic will report with this new release me too dear, me too Link to comment Share on other sites More sharing options...
rednous Posted July 17, 2010 Share Posted July 17, 2010 @00diabolic There's a Lenovo 3000 N200 0769 BIOS update utility v3.05, dated April 14, 2009. Maybe this could resolve your "800fsb running at 738fsb due to Bios/SMBIOS issue" problem unless you've installed it already. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted July 17, 2010 Share Posted July 17, 2010 can you help me with this problem i have kernel panic pre boot that after loading kexts panic occur this is the picture of panic my pc amd p 2 x4 955 3.2mhz mb: asus m4a78t-e 790gx/750 graphics hd 5770 i use snow leopard 10.6.3 retail for setup i custom bootcd for my setup iused many bootloader and kernel for snow but the same panic my pc boot leopard 10.5.8 correct but the problem is in snow but yet cant able to pass panic so help me thanks Link to comment Share on other sites More sharing options...
LatinMcG Posted July 18, 2010 Share Posted July 18, 2010 7-13 version i lost quad core q8300 intel Xeon autodetection. mohamed_kairy2002 you have AMD .. what APPLE computer uses AMD ??? NONE so RETAIL= FAIL you need custom kernel. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted July 18, 2010 Share Posted July 18, 2010 7-13 version i lost quad core q8300 intel Xeon autodetection. mohamed_kairy2002 you have AMD .. what APPLE computer uses AMD ??? NONE so RETAIL= FAIL you need custom kernel. i use already legacy kernel !! i never tried to use orginal one Link to comment Share on other sites More sharing options...
Recommended Posts