Information on VESA modes in ATI&NVIDIA bios

omnis · August 13, 2014

I have come in dire need of assistance... I just loaded a patch called AnVal and it totally botched my acpi tables in such a way to where I cann't boot without a zillion SMC::smcReadKeyAction ERROR: smcReadData8 failed for key <xxx> (kSMCKeyNotFound) and I'm not sure what to do. I am running Mavericks on an i7 Ivy Bridge 3610QM on an HP DV7t-7000 CTO Quad Entertainment Edition PC using it in a triple boot scenario. Luckily I am able to write this post and have my Mac attempting to load in VirtualBox. I've attempted safe mode, but I can't even get there because the tables just load and load providing countless lines of the same error. I think I may have installed the patch wrong btw. I extracted AnVAL5.1.4.zip and executed bdmesg. I can't remember what exactly it said, but I saw it say something along the lines of "added tables" here, and "dropped tables" there. I should have known better than to do this, esp. with what I'm not sure is still relevant because these posts about it are pretty old. I am running what is "pretty new" (Mavericks) and now I am only running a shell of what it was because I don't know exactly what it changed so I don't know how to undo the changes and solve me riddle! Anywho, I hope this will at least make someone think before they do. I still haven't fully read the instructions, but I digress. If anyone can help, please do. Thanks for your time. Oh, and also my system board id is 181F it runs Insyde BIOS, I have the integrated Intel HD Graphics 4000 and an Nvidia GeForce 650M. The reason I was trying to do this in the first place was in an attempt to get my Mavericks to see more than just 7MB VRAM and I just couldn't figure it out. Later! Do NOT try this at home folks! lol

mendietinha · August 13, 2014

unbelievable.

PHV · August 13, 2014

I still haven't fully read the instructions

find the error

Slice · August 20, 2014

Hi guys,

I will propose all to learn investigations made by Clover team in the patching VideoBios to get large resolution before asking something. The question is much more complex then you may propose in your nightmare.

If you think that you are able to do more then we did then don't ask but report your achievements.

Regards!

Funky frank · August 20, 2014

Hi I use an ATI HD5570 and patching it with clover using the default config (8007A802A005->8007A8023804). But still the doesn't fit until the monitor edges, but it should be 1920x1080x32. Is there a way to have the same 1920x1080 resolution as in OSX finder?

Slice · August 20, 2014

UEFI boot and UEFI VideoBIOS.

m1go1 · January 9, 2016

Hi. Thx 4 AnalyseVBIOS2.zip!

I need 1080р on my videocard Nvidia GT 7950 256Mb. I changed and updated my bios (AnalyseVBIOS verifed new bios).

0x8b8b-!
0x8ccb--
0x8ceb--
0x8d2b--
0x8d4b--
0x8d6b--

00000000000060302A009851002A4030701300000000000068200520104B6419...
0004FF030000FF0317049F043F050003FF020000FF0202030803250300FF6419 [1024 x 768] 
0004FF030000FF0317049F043F050003FF020000FF0202030803250311FF302A [1024 x 768] 
0005FF040000FF042F059F0597060004FF030000FF0300040304290400FF302A [1280 x 1024] 
7805770500007705A705170697061A041904000019041A041D04290400FF483F [1400 x 1050] 
40063F0600003F067F063F076F08B004AF040000AF04B004B304E10411FF1040 [1600 x 1200] 
D007FF070000FF072F083F085F080006FF050000FF0510061106120611FF302A ??? -640x320
7805780500007705A805170697061A041904000019041A041D04290400FFA00F [1400 x 1050] 
20031F0300001F034703C7031F04580257020000570258025C02730211FF421D [ 800 x 600] 
0005FF040000FF04C305F305FF0520031F0300001F03240327032B0300FF2940 [1280 x 1024] 
0008FF070000FF073F085F083F090006FF050000FF0510061106120611FF0000 [2048 x 1536] 
0000000000000000000000000000000000000000000000000000000000FF0000
0000000000000000000000000000000000000000000000000000000000FF483F
80077F0700007F07E30703088708B004AF040000AF04B104B704D20400FF0000 [1920 x 1200] 
0000000000000000000000000000000000000000000000000000000000FF0000
0000000000000000000000000000000000000000000000000000000000FF0000
0000000000000000000000000000000000000000000000000000000000FF0011
...13000000503228C632C688C5D8C5000000005BD48D5B1B8E715BD48D5B1B8E71


00000000000060302A009851002A4030701300000000000068200520104B6419...
0004FF030000FF0317049F043F050003FF020000FF0202030803250300FF6419 [1024 x 768] 
0004FF030000FF0317049F043F050003FF020000FF0202030803250311FF302A [1024 x 768] 
0005FF040000FF042F059F0597060004FF030000FF0300040304290400FF302A [1280 x 1024] 
7805770500007705A705170697061A041904000019041A041D04290400FF483F [1400 x 1050] 
40063F0600003F067F063F076F08B004AF040000AF04B004B304E10411FF1040 [1600 x 1200] 
D007FF070000FF072F083F085F080006FF050000FF0510061106120611FF302A ??? -640x320
7805780500007705A805170697061A041904000019041A041D04290400FFA00F [1400 x 1050] 
20031F0300001F034703C7031F04580257020000570258025C02730211FF421D [800 x 600] 
0005FF040000FF04C305F305FF0520031F0300001F03240327032B0300FF2940 [1280 x 1024] 
0008FF070000FF073F085F083F090006FF050000FF0510061106120611FF0000 [2048 x 1536] 
80077F0700007F07E30703088708380437040000370439043F045A0400FF0000 [1920 x 1080]  !
90068F0600008F06BF06DF062F071A041904000019041B042104370400FF2F3F [1680 x 1050]  !
80077F0700007F07E30703088708B004AF040000AF04B104B704D20400FF0000 [1920 x 1200] 
0005FF040000FF04C305F305FF0520031F0300001F03240327032B0300FF0000 [1280 x 800]  !
A0059F0500009F05DF05FF05DF068403830300008303860389038F0300FF952E [1440 x 900]  !
0005ff040000ff042f059f0597060003ff020000ff0202030803210301ff0000 [1280 x 768]  !
...13000000503228C632C688C5D8C5000000005BD48D5B1B8E715BD48D5B1B8E71

But my OS X Mavericks 10.9.2 (13C64) resolution 1280x1024 stil has't changed.

1) Chamelion boot-codes:

<key>Graphics Mode</key>
<string>1920x1080x32</string>

<key>GraphicsEnabler</key>
<string>Yes</string>
<key>VBIOS</key>
<string>Yes</string>

or

<key>Graphics Mode</key>
<string>1920x1080x32</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>NVCAP_0295</key>
<string>04000000000003000c0000000000000700000000</string>

= Not working!

2) Chamelion boot-code:

<key>Graphics Mode</key>
<string>1920x1080x32</string>

<key>GraphicsEnabler</key>
<string>Yes</string>
<key>UseNvidiaROM</key>
<string>Yes</string>
<key>NVCAP_0295</key>
<string>04000000000003000c0000000000000700000000</string>

+ /Extra/10de_0295.rom

= Gives reboot!

I use DVI->HDMI cable. Chameleon does't show the new (patched) resolutions in bootloader. Reinstall OS X really necessary?

Help me plz. What else can I do try to make 1080p? AIDA in OS Windows shows all resolutions.

Slice · January 10, 2016

If this is really Geforce 7xxx card then system 10.7.5 in 32bit mode is your last chance to have full support.

Comp #4 in my signature.

sSIDs · August 30, 2016

Hi team!

Gouldn't find proper solution to make my Palit gf650ti Boost it boots with 1920x1080.

Does anybody could lead me or link to where and how modify bios strings that will unlock VESA 1920x1080? how it is 1600xSomething else

Slice · September 19, 2016

Hi team!

Gouldn't find proper solution to make my Palit gf650ti Boost it boots with 1920x1080.

Does anybody could lead me or link to where and how modify bios strings that will unlock VESA 1920x1080? how it is 1600xSomething else

	<key>Graphics</key>
	<dict>
		<key>PatchVBios</key>
		<true/>
	</dict>
	<key>GUI</key>
	<dict>
		<key>ScreenResolution</key>
		<string>1920x1080</string>

sSIDs · June 6, 2017

sorry for my late)

this does\t help either...

ROM placed to rom folder in clover folder.

sids-iMac:~ sid$ bdmesg
0:100  0:100  MemLog inited, TSC freq: 3037496935
0:100  0:000  LegacyRegion2: Chipset/proc: 0x2E208086
0:100  0:000   Intel Series 4 and similar (PAM 0x90-0x96)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 2E208086
0:100  0:000  , Install = Success
0:109  0:009  BiosVideoDriverBindingStart!
0:109  0:000  BiosVideoCheckForVbe
0:109  0:000  EdidOverride not found
0:181  0:071   Edid1-
0:204  0:023   Edid0+
0:204  0:000   found Detail Timing 1920x1080
0:255  0:050     0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
0:256  0:001     1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
0:258  0:001     2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
0:260  0:001     3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3
0:271  0:010     4 1920x1080 attr=3BF - ok, edid+, working, highest, pref=4
0:272  0:001     5 1280x800 attr=3BF - ok, edid+, working
0:272  0:000  BV new mode: 4 1920x1080
0:621  0:348   SetMode pref 4 (4) = Success
4:235  3:614  
4:235  0:000  Now is 6.6.2017,  17:38:49 (GMT)
4:235  0:000  Starting Clover revision: 4077 on CLOVER EFI
4:235  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.5 | XCODE: 8.2.1]
4:235  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,3716D873-F3BB-4CDB-9206-2623B0BA4A38,0x15921800,0x829BB68) @DE268898
4:235  0:000  SelfDirPath = \EFI\CLOVER
4:235  0:000  === [ Get Smbios ] ========================================
4:235  0:000  Type 16 Index = 0
4:235  0:000  Total Memory Slots Count = 4
4:235  0:000  Type 17 Index = 0
4:235  0:000  SmbiosTable.Type17->Speed = 800MHz
4:235  0:000  SmbiosTable.Type17->Size = 2048MB
4:235  0:000  SmbiosTable.Type17->Bank/Device = BANK0 DIMM0
4:235  0:000  SmbiosTable.Type17->Vendor = Manufacturer00
4:235  0:000  SmbiosTable.Type17->SerialNumber = SerNum00
4:235  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber00
4:235  0:000  Type 17 Index = 1
4:235  0:000  SmbiosTable.Type17->Speed = 800MHz
4:235  0:000  SmbiosTable.Type17->Size = 1024MB
4:235  0:000  SmbiosTable.Type17->Bank/Device = BANK1 DIMM1
4:235  0:000  SmbiosTable.Type17->Vendor = Manufacturer01
4:235  0:000  SmbiosTable.Type17->SerialNumber = SerNum01
4:235  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber01
4:235  0:000  Type 17 Index = 2
4:235  0:000  SmbiosTable.Type17->Speed = 800MHz
4:235  0:000  SmbiosTable.Type17->Size = 2048MB
4:235  0:000  SmbiosTable.Type17->Bank/Device = BANK2 DIMM2
4:235  0:000  SmbiosTable.Type17->Vendor = Manufacturer02
4:235  0:000  SmbiosTable.Type17->SerialNumber = SerNum02
4:235  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber02
4:235  0:000  Type 17 Index = 3
4:235  0:000  SmbiosTable.Type17->Speed = 800MHz
4:235  0:000  SmbiosTable.Type17->Size = 1024MB
4:235  0:000  SmbiosTable.Type17->Bank/Device = BANK3 DIMM3
4:235  0:000  SmbiosTable.Type17->Vendor = Manufacturer03
4:235  0:000  SmbiosTable.Type17->SerialNumber = SerNum03
4:235  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber03
4:235  0:000  Boot status=0
4:235  0:000  Running on: 'P5Q-E' with board 'P5Q-E'
4:235  0:000  === [ GetCPUProperties ] ==================================
4:235  0:000  CPU Vendor = 756E6547 Model=10676
4:235  0:000   The CPU supported SSE4.1
4:235  0:000  got cores from CPUID_1 = 4
4:235  0:000  The CPU not supported turbo
4:235  0:000  BrandString = Intel(R) Xeon(R) CPU           E5472  @ 3.00GHz
4:235  0:000  MSR dumps:
4:235  0:000  	@0x00CD=806
4:235  0:000  	@0x0198=4720472006004720
4:235  0:000  FSBFrequency = 506 MHz, DMI FSBFrequency = 407 MHz, Corrected FSBFrequency = 407 MHz
4:235  0:000  MaxDiv/MinDiv: 7.5/6
4:235  0:000  Turbo: 8/0/0/0
4:235  0:000  Features: 0xBFEBFBFF
4:235  0:000  Threads: 4
4:235  0:000  Cores: 4
4:235  0:000  FSB: 101 MHz
4:235  0:000  CPU: 3800 MHz
4:235  0:000  TSC: 3800 MHz
4:235  0:000  PIS: 407 MHz
4:235  0:000  === [ GetDevices ] ========================================
4:235  0:000  PCI (00|00:00.00) : 8086 2E20 class=060000
4:235  0:000  PCI (00|00:01.00) : 8086 2E21 class=060400
4:235  0:000  PCI (00|01:00.00) : 10DE 11C2 class=030000
4:235  0:000   - GFX: Model=Palit GeForce GTX 650 Ti BOOST family E6 (Nvidia)
4:236  0:000  PCI (00|01:00.01) : 10DE 0E0B class=040300
4:236  0:000   - HDMI Audio: 
4:236  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
4:236  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
4:236  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
4:236  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
4:236  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
4:236  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
4:236  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
4:236  0:000  PCI (00|02:00.00) : 11AB 4364 class=020000
4:236  0:000   - LAN: 0 Vendor=Marvell
4:236  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
4:236  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
4:236  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
4:236  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
4:236  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
4:236  0:000  PCI (00|00:1F.00) : 8086 3A16 class=060100
4:236  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
4:236  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
4:236  0:000  === [ GetDefaultSettings ] ================================
4:236  0:000  Clover load options size = 0 bytes
4:239  0:003  EFI\CLOVER\config.plist loaded: Success
4:239  0:000  === [ GetListOfThemes ] ===================================
4:240  0:000  - [00]: embedded
4:242  0:001  - [00]: mimi black
4:244  0:002  - [01]: random
4:246  0:001  === [ Found config plists ] ===============================
4:246  0:000  - config.plist
4:249  0:002  === [ GetEarlyUserSettings ] ==============================
4:249  0:000  timeout set to 10
4:249  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
4:249  0:000  Default theme: mimi black
4:249  0:000  Hiding entries with string DATA
4:249  0:000  Hiding entries with string FILMS
4:249  0:000  Hiding entries with string BackUP
4:249  0:000  Hiding entries with string Recovery HD
4:249  0:000  === [ LoadDrivers ] =======================================
4:250  0:000  Loading AppleImageCodec-64.efi  status=Success
4:252  0:002  Loading AppleKeyAggregator-64.efi  status=Success
4:253  0:001  Loading AppleUITheme-64.efi  status=Success
4:255  0:001  Loading FirmwareVolume-64.efi  status=Success
4:256  0:001  Loading FSInject-64.efi  status=Success
4:258  0:001  Loading GrubEXFAT-64.efi  status=Success
4:260  0:002   - driver needs connecting
4:261  0:000  Loading GrubNTFS-64.efi  status=Success
4:263  0:002   - driver needs connecting
4:264  0:000  Loading HFSPlus.efi  status=Success
4:266  0:002   - driver needs connecting
4:266  0:000  Loading NTFS.efi  status=Success
4:271  0:005   - driver needs connecting
4:272  0:000  Loading SMCHelper-64.efi  status=Success
4:273  0:001  4 drivers needs connecting ...
4:273  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
4:273  0:000  HFS+ driver loaded
4:422  0:149  === [ InitScreen ] ========================================
4:422  0:000  SetScreenResolution: 1920x1080 - already set
4:422  0:000  Console modes reported: 4, available modes:
4:422  0:000   - [01]: 80x25
4:422  0:000   - [02]: 80x50
4:422  0:000   - [03]: 100x31
4:422  0:000   - [04]: 240x56 (current mode)
4:422  0:000  SetScreenResolution: 1920x1080 - already set
4:422  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,3716D873-F3BB-4CDB-9206-2623B0BA4A38,0x15921800,0x829BB68)
4:423  0:001  Using embedded font: Success
4:424  0:000  === [ GetMacAddress ] =====================================
4:424  0:000  === [ ScanSPD ] ===========================================
4:425  0:000  SMBus device : 8086 3A30 class=0C0500 status=Success
4:425  0:000  SMBus CmdReg: 0x3
4:425  0:000  Scanning SMBus [8086:3A30], mmio: 0xFCFFF404, ioport: 0x400, hostc: 0x1
4:425  0:000  Slots to scan [8]...
4:425  0:000  SPD[0]: Type 8 @0x50
4:440  0:015  DDR speed 800MHz
4:440  0:000  Slot: 0 Type 19 2048MB 800MHz Vendor=Corsair PartNo=CM2X2048-6400C5DHX SerialNo=0000000000000000
4:441  0:000  SPD[1]: Type 8 @0x51
4:454  0:013  DDR speed 800MHz
4:454  0:000  Slot: 1 Type 19 1024MB 800MHz Vendor=Kingston PartNo=99U5316-028.A00LF SerialNo=060802080801060B
4:455  0:000  SPD[2]: Type 8 @0x52
4:470  0:015  DDR speed 800MHz
4:470  0:000  Slot: 2 Type 19 2048MB 800MHz Vendor=Corsair PartNo=CM2X2048-6400C5DHX SerialNo=0000000000000000
4:470  0:000  SPD[3]: Type 8 @0x53
4:484  0:013  DDR speed 800MHz
4:484  0:000  Slot: 3 Type 19 1024MB 800MHz Vendor=Kingston PartNo=99U5316-028.A00LF SerialNo=06050207030F060C
4:485  0:000  === [ GetAcpiTablesList ] =================================
4:485  0:000  Get Acpi Tables List from RSDT:
4:485  0:000   - [00]: FACP  OEMFACP  len=132
4:485  0:000   - [01]: APIC  OEMAPIC  len=108
4:485  0:000   - [02]: MCFG  OEMMCFG  len=60
4:485  0:000   - [03]: OEMB  AMI_OEM  len=137
4:485  0:000   - [04]: HPET  OEMHPET  len=56
4:485  0:000   - [05]: OSFR  OEMOSFR  len=176
4:485  0:000  Calibrated TSC frequency =3037496935 =3037MHz
4:485  0:000  === [ GetUserSettings ] ===================================
4:485  0:000  Read NVCAP:050000000000FFFFFFFF00000000000E00000000
4:485  0:000  USB FixOwnership: yes
4:485  0:000  Dropping 3 tables:
4:485  0:000   - [00]: Drop table  signature="DMAR" (52414D44)
4:485  0:000           - set table: 52414D44,                0 to drop: no
4:485  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
4:485  0:000           - set table: 54445353,       6D50757043 to drop: no
4:485  0:000   - [02]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
4:485  0:000           - set table: 54445353,   74734930757043 to drop: no
4:485  0:000   - final DSDT Fix mask=1F46B5D7
4:485  0:000  ChassisType: 0x13
4:485  0:000  QPI: 1600MHz
4:485  0:000  CpuFreq: 3400MHz
4:485  0:000  CpuType: 402
4:485  0:000  BusSpeed: 400kHz
4:486  0:000  === [ ScanVolumes ] =======================================
4:486  0:000  Found 12 volumes with blockIO
4:486  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
4:486  0:000          Result of bootcode detection: bootable unknown (legacy)
4:486  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
4:486  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
4:487  0:000          Result of bootcode detection: bootable unknown (legacy)
4:487  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
4:489  0:002          Result of bootcode detection: bootable unknown (legacy)
4:489  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,BC529A42-A633-436F-9654-E2F4C40EDF5A,0x28,0x64000)
4:489  0:000          Result of bootcode detection: bootable unknown (legacy)
4:489  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,BE850273-B699-4B2A-90C2-B0385B52D9AF,0x64800,0x158BD000)
4:489  0:000          Result of bootcode detection: bootable Windows (vista,win)
4:490  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,3716D873-F3BB-4CDB-9206-2623B0BA4A38,0x15921800,0x829BB68)
4:490  0:000          Result of bootcode detection: bootable unknown (legacy)
4:490  0:000          This is SelfVolume !!
4:490  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,9CFF0E2E-B84F-4CDE-86E4-32DA0656C735,0x1DBBD368,0x135F20)
4:490  0:000          hiding this volume
4:490  0:000  - [08]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,MBR,0x19436C14,0x800,0x4A856000)
4:490  0:000          Result of bootcode detection: bootable Windows (win)
4:500  0:009          hiding this volume
4:500  0:000  - [09]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,MBR,0x10D1E302,0x800,0x3A385800)
4:500  0:000          Result of bootcode detection: bootable Windows (vista,win)
4:502  0:002          hiding this volume
4:502  0:000  - [10]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,MBR,0xE1BDC69D,0x7C1,0x2542C83F)
4:503  0:000  - [11]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)\HD(1,MBR,0xE1BDC69D,0x7C1,0x2542C83F)\HD(1,MBR,0x00000000,0x800,0x2542C800)
4:503  0:000          Result of bootcode detection: bootable Windows (win)
4:520  0:016          hiding this volume
4:538  0:018  Loading nvram.plist from Vol 'MacOS' - loaded, size=2014
4:540  0:001  === [ PutNvramPlistToRtVars ] =============================
4:540  0:000   Adding Key: Clover.BackupDirOnDestVol: Size = 2, Data: 4E 6F 
4:540  0:000   Adding Key: Clover.LogEveryBoot: Size = 3, Data: 59 65 73 
4:540  0:000   Adding Key: Clover.Theme: Size = 10, Data: 6D 69 6D 69 20 62 6C 61 63 6B 
4:540  0:000   Adding Key: EFILoginHiDPI: Size = 4, Data: 01 00 00 00 
4:540  0:000   Adding Key: SystemAudioVolume: Size = 1, Data: 27 
4:540  0:000   Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 90 21 5C 0A 00 00 00 00 13 1D 00 1A 7D 0A BB BF 
4:540  0:000   Adding Key: boot-args: String: Size = 26, Val = 'kext-dev-mode=1 nvda_drv=1'
4:540  0:000   Adding Key: bootercfg: Size = 2, Data: 28 00 
4:540  0:000   Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00 
4:540  0:000   Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 11 
4:540  0:000   Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 
4:540  0:000   Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 
4:540  0:000   Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 
4:540  0:000   Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 
4:540  0:000   Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 
4:540  0:000   Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 06 80 07 00 
4:540  0:000   Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 
4:540  0:000   Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 
4:540  0:000   Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 
4:540  0:000   Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 
4:540  0:000   Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 
4:540  0:000   Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 
4:540  0:000   Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 64 38 00 6B 32 33 00 00 
4:540  0:000   Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 09 0F 00 00 05 
4:540  0:000   Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 
4:540  0:000   Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 64 38 00 00 00 00 00 00 
4:540  0:000   Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
4:540  0:000   Adding Key: fmm-computer-name: Size = 12, Data: 73 69 64 E2 80 99 73 5F 69 4D 61 63 
4:540  0:000   Adding Key: nvda_drv: Size = 2, Data: 31 00 
4:540  0:000   Adding Key: prev-lang:kbd: Size = 4, Data: 65 6E 3A 30 
4:540  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
4:540  0:000  === [ InitTheme ] =========================================
4:541  0:001  Using theme 'mimi black' (EFI\CLOVER\themes\mimi black)
4:541  0:000  theme mimi black defined in NVRAM found and theme.plist parsed
4:541  0:000  OS main and drive as badge
4:543  0:001  Loading font from ThemeDir: Success
4:543  0:000  Choosing theme mimi black
4:543  0:000  found boot-args in NVRAM:kext-dev-mode=1 nvda_drv=1, size=26
4:543  0:000  ...found arg:kext-dev-mode=1
4:543  0:000  ...adding arg:kext-dev-mode=1
4:543  0:000  ...found arg:nvda_drv=1
4:543  0:000  ...adding arg:nvda_drv=1
4:543  0:000  after NVRAM boot-args=npci=0x2000 kext-dev-mode=1 nvda_drv=1 
4:543  0:000  === [ Dump SMC keys from NVRAM ] ==========================
4:543  0:000  found AppleSMC protocol
4:544  0:000  === [ ScanLoader ] ========================================
4:544  0:000  - [04]: 'EFI'
4:552  0:008  - [05]: 'Win10'
4:581  0:028  - [06]: 'MacOS'
4:582  0:001          AddLoaderEntry for Volume Name=MacOS
4:583  0:001      Check if volume Is Hibernated:
4:583  0:000      Check sleep image 'by signature':
4:585  0:001      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
4:585  0:000      SleepImage name from pref: ImageVolume = 'MacOS', ImageName = '\private\var\vm\sleepimage'
4:587  0:001      sleepimage not found -> Not Found
4:587  0:000      hibernated: no - sign
4:623  0:036  - [07]: 'Recovery HD', hidden
4:623  0:000  - [08]: 'DATA', hidden
4:623  0:000  - [09]: 'FILMS', hidden
4:623  0:000  - [11]: 'BackUP', hidden
4:623  0:000  Scanning legacy ...
4:623  0:000   5: 'Win10' (vista,win) add legacy
4:626  0:002   added 'Windows' OSType=2 Icon=vista,win
4:626  0:000   8: 'DATA' (win) hidden
4:626  0:000   9: 'FILMS' (vista,win) hidden
4:626  0:000  11: 'BackUP' (win) hidden
4:626  0:000  === [ AddCustomTool ] =====================================
4:627  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
4:627  0:000  Checking EFI partition Volume 4 for Clover
4:630  0:002  === [ GetEfiBootDeviceFromNvram ] =========================
4:630  0:000   - found entry 0. 'MacOS', Volume 'MacOS', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,3716D873-F3BB-4CDB-9206-2623B0BA4A38,0x15921800,0x829BB68)\System\Library\CoreServices\boot.efii'
4:630  0:000  DefaultIndex=0 and MainMenu.EntryCount=7
4:827  0:197  GUI ready
10:085  5:257  BootVariable of the entry is empty
10:085  0:000  === [ StartLoader ] =======================================
10:085  0:000  Finally: Bus=404999kHz CPU=3400MHz
10:085  0:000  Loading boot.efi  status=Success
10:141  0:055  GetOSVersion: 10.10.5 (14F2411)
10:141  0:000  === [ PatchSmbios ] =======================================
10:141  0:000  insert table 9 for dev 0:0
10:141  0:000  insert table 9 for dev 0:1
10:141  0:000  insert table 9 for dev 0:0
10:142  0:000  Trusting SMBIOS...
10:142  0:000  Channels: 2
10:142  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
10:142  0:000   partNum=ModulePartNumber00
10:142  0:000  SMBIOS Type 17 Index = 0 => 0 0:
10:142  0:000  BANK 0 DIMM0 800MHz 2048MB
10:142  0:000   partNum=ModulePartNumber02
10:142  0:000  SMBIOS Type 17 Index = 1 => 2 2:
10:142  0:000  BANK 1 DIMM0 800MHz 2048MB
10:142  0:000   partNum=ModulePartNumber01
10:142  0:000  SMBIOS Type 17 Index = 2 => 1 1:
10:142  0:000  BANK 0 DIMM1 800MHz 1024MB
10:142  0:000   partNum=ModulePartNumber03
10:142  0:000  SMBIOS Type 17 Index = 3 => 3 3:
10:142  0:000  BANK 1 DIMM1 800MHz 1024MB
10:142  0:000  mTotalSystemMemory = 6144
10:142  0:000  NumberOfMemoryDevices = 4
10:142  0:000  Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800
10:142  0:000  Type20[1]->End = 0x30FFFF, Type17[1] = 0x1800
10:142  0:000  Type20[2]->End = 0x40FFFF, Type17[2] = 0x2C00
10:142  0:000  Type20[3]->End = 0x30FFFF, Type17[3] = 0x4400
10:142  0:000  === [ PatchACPI ] =========================================
10:142  0:000  RSDT 0xDFF70000
10:142  0:000  FADT from RSDT: 0xDFF70200
10:142  0:000  XSDT 0xDFF70100
10:142  0:000  FADT from XSDT: 0xDFF70290
10:142  0:000  Xsdt reallocation done
10:142  0:000  old FADT length=F4
10:142  0:000  Found OperationRegion(BIOS, SystemMemory, DFF7E064, ...)
10:142  0:000  Found OperationRegion(RAMW, SystemMemory, DFFF0000, ...)
10:143  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
10:144  0:001  Apply DsdtFixMask=0x1F46B5D7
10:144  0:000     drop _DSM mask=0x0000
10:144  0:000  === [ FixBiosDsdt ] =======================================
10:144  0:000  VideoCard devID=0x11C210DE
10:144  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
10:144  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
10:144  0:000  USBADR[1] = 0x1A0001 and PCIe = 0xFFFE
10:144  0:000  USBADR[2] = 0x1A0002 and PCIe = 0xFFFE
10:144  0:000  USBADR[3] = 0x1A0007 and PCIe = 0xFFFE
10:144  0:000  USBADR[4] = 0x1D0000 and PCIe = 0xFFFE
10:144  0:000  USBADR[5] = 0x1D0001 and PCIe = 0xFFFE
10:145  0:000  USBADR[6] = 0x1D0002 and PCIe = 0xFFFE
10:145  0:000  USBADR[7] = 0x1D0007 and PCIe = 0xFFFE
10:145  0:000  first CPU found at 2B offset 2E
10:145  0:000  score candidate at 27
10:145  0:000  score inserted in acpi_cpu_score _PR_
10:145  0:000  Found ACPI CPU: P001 | P002 | P003 | P004 , within the score: _PR_
10:145  0:000  Found PCIROOTUID = 0
10:145  0:000  Start RTC Fix
10:145  0:000  found RTC had IRQNoFlag will move -3 bytes
10:145  0:000  ...len=975C
10:145  0:000  new size written to 103D shift=0 len=975C
10:145  0:000  len after correct outers 975C
10:145  0:000  Start TMR Fix
10:145  0:000  Start PIC Fix
10:145  0:000  PIC size=2B at F99
10:145  0:000  found PIC had IRQNoFlag will move -3 bytes
10:145  0:000  Fix Device PIC size -3
10:145  0:000  Start HPET Fix
10:145  0:000  Start Display0 Fix
10:145  0:000  add device GFX0
10:145  0:000  Creating Method(_DSM) for 10DE card
10:145  0:000  now inserting Video device
10:145  0:000  ... into existing bridge
10:145  0:000  patch Display #0 of Vendor=0x10DE
10:145  0:000  Start NetWork Fix
10:145  0:000  have no Network device while NetworkADR2=0
10:145  0:000  NetworkADR1=1C0005 NetworkADR2=0
10:145  0:000  network DSM created, size=5B
10:145  0:000  Start SBUS Fix PCI=C98 len=97C0
10:146  0:000  SBUS absent, adding to the end of PCI0 at 4A4F
10:146  0:000  patch AHCI in DSDT 
10:146  0:000  Found SATAAHCIADR1=1F0002 at 2BDA
10:146  0:000  Start SATA AHCI Fix
10:146  0:000  patch HDEF in DSDT 
10:146  0:000  Start HDA Fix
10:146  0:000  Start Add Device HDEF
10:146  0:000  Start HDMI14 Fix
10:146  0:000  have no HDMI device while HDMIADR2=1
10:146  0:000  HDMIADR1=10000 HDMIADR2=1
10:146  0:000    with default properties
10:146  0:000  Start USB Fix
10:146  0:000  USB bridge[1A0000] at 496B, size = 71
10:146  0:000  USB bridge[1A0001] at 4A44, size = 71
10:147  0:000  USB bridge[1A0002] at 4B1D, size = 71
10:147  0:000  USB bridge[1A0007] at 45E9, size = 1F
10:147  0:000  USB bridge[1D0000] at 4857, size = 71
10:147  0:000  USB bridge[1D0001] at 4930, size = 71
10:147  0:000  USB bridge[1D0002] at 4A09, size = 71
10:148  0:000  USB bridge[1D0007] at 45C8, size = 1F
10:148  0:000   deleting device CRT_
10:148  0:000   deleting device DVI_
10:148  0:000   deleting device SPKR
10:148  0:000   deleting device ECP_
10:148  0:000   deleting device LPT_
10:148  0:000   deleting device FDC0
10:148  0:000   deleting device ECP1
10:149  0:000   deleting device LPT1
10:149  0:000  NewName OCST already present, renaming impossibble
10:149  0:000  Start PNLF Fix
10:149  0:000  found PWRB at 525C
10:149  0:000  Start _S3D Fix
10:149  0:000  OperationRegion (BIOS...) corrected to addr=0xDFF7E064
10:149  0:000  OperationRegion (RAMW...) corrected to addr=0xDFFF0000
10:150  0:000  Start Darwin Fix
10:150  0:000  Name _OSI present at 0x28C, renaming to OOSI
10:150  0:000  Name _OSI present at 0x293, renaming to OOSI
10:150  0:000  Name _OSI present at 0x2AE, renaming to OOSI
10:150  0:000  Name _OSI present at 0x2C8, renaming to OOSI
10:150  0:000  Name _OSI present at 0x2E6, renaming to OOSI
10:150  0:000  Name _OSI present at 0x304, renaming to OOSI
10:150  0:000  Name _OSI present at 0x320, renaming to OOSI
10:150  0:000  Name _OSI present at 0x340, renaming to OOSI
10:150  0:000  Start SHUTDOWN Fix len=9E39
10:150  0:000  === [ ACPIDropTables ] ====================================
10:150  0:000  === [ PatchAllSSDT ] ======================================
10:150  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
10:150  0:000   Xsdt has tables count=6
10:150  0:000  CPUBase=1 and ApicCPUBase=1 ApicCPUNum=4
10:150  0:000  Initial control=0x6004720
10:150  0:000  Maximum control=0x4720
10:150  0:000  UnderVoltStep=0
10:150  0:000  PLimitDict=0
10:150  0:000  PStates count=4
10:150  0:000  SSDT with CPU P-States generated successfully
10:150  0:000  SSDT with CPU C-States generated successfully
10:150  0:000  === [ RestSetup macOS ] ===================================
10:150  0:000  EdidDiscovered size=128
10:150  0:000  ------- EDID Table
10:150  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  4C  2D
10:150  0:000  010  |  56  06  33  35  37  30  1E  14  01  03
10:150  0:000  020  |  80  33  1D  78  2A  E9  E1  A3  54  26
10:150  0:000  030  |  0F  4C  99  50  54  23  08  00  81  00
10:150  0:000  040  |  81  40  81  80  95  00  A9  40  B3  00
10:150  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
10:150  0:000  060  |  2D  40  58  2C  45  00  FE  1F  11  00
10:150  0:000  070  |  00  1E  00  00  00  FD  00  38  3C  1E
10:150  0:000  080  |  51  11  00  0A  20  20  20  20  20  20
10:150  0:000  090  |  00  00  00  FC  00  53  79  6E  63  4D
10:150  0:000  100  |  61  73  74  65  72  0A  20  20  00  00
10:150  0:000  110  |  00  FF  00  48  4C  4F  5A  37  30  30
10:150  0:000  120  |  36  38  32  0A  20  20  00  D2
10:150  0:000  NVidia GFX injection not set
10:150  0:000   detected codec: 11D4:989B
10:150  0:000  stringlength = 3064
10:151  0:000  CurrentMode: Width=1920 Height=1080
10:151  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE268898
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE268898
10:151  0:000  Use origin smbios table type 1 guid.
10:152  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
10:153  0:000    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
10:158  0:005    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_ACPISensors.kext
10:163  0:004    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext
10:166  0:002    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext
10:169  0:003    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_LPCSensors.kext
10:204  0:035  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
10:206  0:001  Custom boot is disabled

Information on VESA modes in ATI&NVIDIA bios

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites