cunctator Posted February 6, 2010 Share Posted February 6, 2010 I tried every possible combination of configuration for my network I mostly experimented with this: Thanks again for the resolution hack, it works perfectly XD Ure net settings looks right, did u tried pinging the host and the router? do they answer to the ping? Can u ping the guest from the host? does it answer? Link to comment Share on other sites More sharing options...
ScorpionMkd Posted February 6, 2010 Share Posted February 6, 2010 Thanks again for the resolution hack, it works perfectly XD Ure net settings looks right, did u tried pinging the host and the router? do they answer to the ping? Can u ping the guest from the host? does it answer? I can ping the guest, and from the guest I can ping my host network adapter. The problem is I cannot ping the router, I cannot access the router any way from the virtual machine... Don't know why... Link to comment Share on other sites More sharing options...
xms5072 Posted February 6, 2010 Share Posted February 6, 2010 I can't find the configuration file (.xml) where is it located? Link to comment Share on other sites More sharing options...
mikecheung Posted February 6, 2010 Share Posted February 6, 2010 Really awesome and well done. Thanks Black Trinitron. I am not skill enough to do the below things anyone could help 1. Anyone can help to post the network patch for winX64? 2. Anyone could help develop boot132 method to install snow leopard directly? Link to comment Share on other sites More sharing options...
ScorpionMkd Posted February 6, 2010 Share Posted February 6, 2010 I managed to install Snow Leo and followed instructions closely. I CAN'T boot it -.- Stuck at: Link to comment Share on other sites More sharing options...
ScorpionMkd Posted February 7, 2010 Share Posted February 7, 2010 I managed to install Snow Leo and followed instructions closely. I CAN'T boot it -.- Stuck at: Nevermind this post, my VB messed up something. It's up now yey! Snow Leopard! Ethernet working perfectly with the cable trick + mac address change, using only DHCP and nothing else needed. I will try to update now using the instructions provided by brjones, I will post once I'm finished. Cheers! Link to comment Share on other sites More sharing options...
iassael Posted February 7, 2010 Share Posted February 7, 2010 did you apply the patches for 3.1.4 to run network? Link to comment Share on other sites More sharing options...
ScorpionMkd Posted February 8, 2010 Share Posted February 8, 2010 did you apply the patches for 3.1.4 to run network? nope, I'm using 3.1.2, running on Win7 x64 Link to comment Share on other sites More sharing options...
a2h Posted February 8, 2010 Share Posted February 8, 2010 -snip- iDeneb 1.6 lite, I had issues with the mouse not responding, it turns out I chose the wrong PS/2 drivers Link to comment Share on other sites More sharing options...
wackou Posted February 8, 2010 Share Posted February 8, 2010 Hi ! Its me again ! I setup virtualbox 3.1.2 with iDeneb 1.5.1 on all my computer : Computer 1 : Intel C2D E, 4gb ram, Nvidia, Windows Seven 64bit Work great But on my other computer, nothing work and sometime I got "CPU Halted..." and the VB Windows crash... Computer 2 : AMD Athlon Dual Core, 2gb ram, ATI Radeon, Windows XP 32bit Laptop 1 : Intel C2D P, 4gb ram, ATI Mobility, Windows Seven 64bit Laptop 2 : Intel Pentium D, 2gb ram, Nvidia, Windows Seven 32bit Here my guest configuration I don't know what i'm doing wrong =s Hope you can tell me why Link to comment Share on other sites More sharing options...
Napoleon913011 Posted February 10, 2010 Share Posted February 10, 2010 Good news: Official Mac OS X Server guest support coming in VBox 3.2 !!!! It will be experimental, so we can hope everything will run pretty in 3.3 See at the Mac OS X guest thread in the VBox forum Link to comment Share on other sites More sharing options...
joycode Posted February 12, 2010 Share Posted February 12, 2010 Thanks. Snow Leopard works great on my Windows 7 now. But I still have a little issues about iPhone. My iPhone has been connected through USB, and I have mounted it through Virtualbox. But it didn't work in my Snow Leopard in VirtualBox. It means I cannot see it in iTunes. Any idea? (it works on iTunes on Windows 7 as the host OS). Link to comment Share on other sites More sharing options...
wackou Posted February 12, 2010 Share Posted February 12, 2010 So now i know why... Your processor nedd to have VT-X (Intel) or AMD-V(AMD) If no, you couldn't boot =s Link to comment Share on other sites More sharing options...
storm1988 Posted February 14, 2010 Share Posted February 14, 2010 Im having problems booting iAtkos v7 after installing on VirtualBox. I only want to have Leopard installed so I follow the first part of guide and installed as default. When it comes to boot up the chameleon loads and I can add in flags like -v. When booting I see the first screen with loads of kext? packs loading and then after that the screen goes blank and the HDD activity stops. Computer Specs: AMD Athlon II 235e DKA790GX 2GB Ram 500 Sata On Board Graphics (Ati 3300) I have got this distro/OSX86 version working in vmware on a laptop but want to move to my media centre. EDIT: I got it going now on Vmware. It fail to load the one of the laptop so i tried a fresh install and that failed. I must have missed something because it is working now . Link to comment Share on other sites More sharing options...
wackou Posted February 14, 2010 Share Posted February 14, 2010 Hi ! Did you install a patched Kernel ? If not, its probably your problem because you have a AMD processor... Normally,you can install without reinstall all the system,juste unselect "essential file system" and select kernel for AMD like Qoopzt Hope I help you Wackou Link to comment Share on other sites More sharing options...
movitch Posted February 15, 2010 Share Posted February 15, 2010 Hi, I have found method to run Ideneb 1.6 on VB 3.1.4 (without any patch) on my DELL Laptop (after bios parameter changes) Installation process is OK but after reboot, no mouse and no keyboard on OSX (a screen "BEFORE YOU BEGIN" appears with keyboard pic and message "Ther isn't keyboard connected etc ...." Do you have any idea or method to make keyboard and mouse "ON" ? Thanks by advance for your help. Movitch. Link to comment Share on other sites More sharing options...
Drovani Posted February 15, 2010 Share Posted February 15, 2010 Installation process is OK but after reboot, no mouse and no keyboard on OSX (a screen "BEFORE YOU BEGIN" appears with keyboard pic and message "Ther isn't keyboard connected etc .... PS/2... PS/2... PS/2... Link to comment Share on other sites More sharing options...
movitch Posted February 15, 2010 Share Posted February 15, 2010 PS/2... PS/2... PS/2... Sorry but I discover this environment. Is there an option in VB for PS / 2 or is it necessary to use a keyboard USB? My Mouse is an USB and the problem is the same... Link to comment Share on other sites More sharing options...
Xn00b Posted February 15, 2010 Share Posted February 15, 2010 Guys, I'm on Ubuntu 9.10 karmic. I'm using VB 3.1.4 (current version available for download). I was able to install iDeneb 1.6 10.5.8. But when I installed it for the first time, I got a KP (something about a commpage no match for last). Then I reinstalled the system by selecting all kernels, all drivers, all fixes etc... (i didn't see those options when I installed the first time). Now, atleast the system boots without a KP but I come to a screen which says "Before you begin, plugin a keyboard). The mouse doesn't work either! I'm attaching a screenshot. Please take a look and let me know. I think someone here installed ApplePS2 kext. I am not sure as to how I can install it. I am also not sure how can I get it on to the OSX Virtual HDD to install it. Link to comment Share on other sites More sharing options...
Drovani Posted February 15, 2010 Share Posted February 15, 2010 Guys, I'm on Ubuntu 9.10 karmic. I'm using VB 3.1.4 (current version available for download). I was able to install iDeneb 1.6 10.5.8. But when I installed it for the first time, I got a KP (something about a commpage no match for last). Then I reinstalled the system by selecting all kernels, all drivers, all fixes etc... (i didn't see those options when I installed the first time). Now, atleast the system boots without a KP but I come to a screen which says "Before you begin, plugin a keyboard). The mouse doesn't work either! I'm attaching a screenshot. Please take a look and let me know. I think someone here installed ApplePS2 kext. I am not sure as to how I can install it. I am also not sure how can I get it on to the OSX Virtual HDD to install it. Once again: Install PS/2 patch. Link to comment Share on other sites More sharing options...
Xn00b Posted February 15, 2010 Share Posted February 15, 2010 Drovani, thanks for your reply. But I'm not sure how to install the PS/2 patch. Could you let me know step by step how to add it? Edit: I figured out I had to reinstall and click "customize" and check the ApplePS2 Old option. That said, now I get a KP. Heres a screenshot. How do I work around it? Link to comment Share on other sites More sharing options...
micro tan Posted February 16, 2010 Share Posted February 16, 2010 Drovani, thanks for your reply. But I'm not sure how to install the PS/2 patch. Could you let me know step by step how to add it? Edit: I figured out I had to reinstall and click "customize" and check the ApplePS2 Old option. That said, now I get a KP. Heres a screenshot. How do I work around it? You need to select one patched kernel (by default it selects none which uses sse3) Link to comment Share on other sites More sharing options...
Black Trinitron Posted February 16, 2010 Author Share Posted February 16, 2010 I have added patches to run SnowLeo inside 3.1.4 version of VB of Windows. You can download it from post 1 Link to comment Share on other sites More sharing options...
juliuscesar Posted February 17, 2010 Share Posted February 17, 2010 I have added patches to run SnowLeo inside 3.1.4 version of VB of Windows.You can download it from post 1 You'r the man! MANY THANKS Success!! on Window$ 7 x64 and AMD cpu Black Trinitron could you please provide with some lights how to use your ethernet patch attached to NAT? Link to comment Share on other sites More sharing options...
abalousek Posted February 17, 2010 Share Posted February 17, 2010 I have added patches to run SnowLeo inside 3.1.4 version of VB of Windows.You can download it from post 1 After updating with the new x86 libraries (VBM.zip) an existing Windows 7 guest OS failed with an incorrect version of the VMMR0.ro file error? I am using VB 3.1.4_Beta2 r57282... Link to comment Share on other sites More sharing options...
Recommended Posts