hnak Posted September 22, 2011 Author Share Posted September 22, 2011 Unfortunately, I don't have any hardware using the chip, so it's practically impossible to develop a driver. Link to comment Share on other sites More sharing options...
CaptHowie Posted October 6, 2011 Share Posted October 6, 2011 Is it possible to get a version for 10.4.11? I want to install it on a Power Mac G4, but I'm running a MacBook Air with 10.6 as my primary machine, so I can't build a 10.4 PowerPC distribution. Link to comment Share on other sites More sharing options...
kris27 Posted October 6, 2011 Share Posted October 6, 2011 I have just uploaded 10.5 build.merry christmas! I am trying to build on PowerMAC G4 running osx 10.5.8 I use Xcode V3. Few attempts, following the APPLE manuals, build is success ..... but when trying to use load kext the message is ApplePCIIDE.kext does not contain code for this architecture. When looking at target.info, which was modified, VAILD_ARCHS ppc, GCC_MODEL_TUNING G4, and ???? just can not remember ..... There are no kextutil, but found on the net that it comes with 10.6 OSX. Could you please advise what parameters to be modified to get build on OSX 10.5.8 G4 ??? I think started going the loop by now ..... can not see trees in the forest. Kind regards Kris Link to comment Share on other sites More sharing options...
hnak Posted October 7, 2011 Author Share Posted October 7, 2011 I chose the build target as "Release_Leo" on Xcode 3.2.6, then added "ppc" to "ARCH" parameter and could start building for ppc, but could not compile as there are some undefined symbols in ppc architecture ( IODTAIOReg8, IOATAIOReg32 ) . You must modify the code to support ppc hardware. Is it possible to get a version for 10.4.11? I want to install it on a Power Mac G4, but I'm running a MacBook Air with 10.6 as my primary machine, so I can't build a 10.4 PowerPC distribution. You can optionally install 10.4u SDK with Xcode 3.2.6, though you must modify the code. Link to comment Share on other sites More sharing options...
kris27 Posted January 28, 2012 Share Posted January 28, 2012 Sorry for dragging on - it was a while ago now, and I was very busy with my telescope controller. 1. Modify or #define IOATAIOReg32 .... as what ?????? #define IOATAIOReg8 ..... as what ????? Is this the only mod required ??? I am not familiar with APPLE ideas of programming, simply not ISO compatible, nor GNUcc. Sorry for being a bit ignorant but APPLE ideas for me are murky like waters in the pond. Regards Kris Link to comment Share on other sites More sharing options...
kdtt Posted March 7, 2012 Share Posted March 7, 2012 (edited) Thank you for driver. Siliconimage 0680 ata works fine in Lion except after wake there's error message"IOATA Controller device blocking bus". 4hds are connected in master/slave mode. ide bios 3.4 more test I have os x in jmicronata and windows xp in silicon 0680, In case like this , You should connect Windows as master mode in primary channel, if not , even latest chameleons can not boot with ebios error 0x42. Edited March 9, 2012 by kdtt Link to comment Share on other sites More sharing options...
hnak Posted April 14, 2012 Author Share Posted April 14, 2012 Sory, I have not checked this thread for long. You can find sample souces at Darwin ATA project - http://code.google.com/p/darwin-ata/ I found some ppc specific code there, but never used them. Link to comment Share on other sites More sharing options...
ElGringo Posted July 6, 2012 Share Posted July 6, 2012 Hi there, Seems to work for everybody but me. I am on Dell Inspiron 545 running 10.6.6. System profiler does not show any PCI cards, eSATA drive is not recognized and the kext was loaded with Kext Utility in the System/Library/Extensions folder. Link to comment Share on other sites More sharing options...
hnak Posted July 6, 2012 Author Share Posted July 6, 2012 Did you insert a card with one of the supported chips ? Link to comment Share on other sites More sharing options...
SnoopKatt Posted July 7, 2012 Share Posted July 7, 2012 Thank you! This works flawlessly in Lion. Here is the card I'm using: http://www.amazon.com/VT6421A-3-Port-SATA-Controller-Support/dp/B000YMJ6ZE/ref=sr_1_1?ie=UTF8&qid=1341692030&sr=8-1&keywords=PCI%2BIDE Link to comment Share on other sites More sharing options...
ElGringo Posted July 10, 2012 Share Posted July 10, 2012 Did you insert a card with one of the supported chips ? The card seems to be right - VIA VT6421. Since this happened, I got a SATA (from the internal SATA port of the card) to eSATA cable and now the eSATA drive is working fine. It is not available for booting at the Chameleon splash window (as when the external HDD is connected with USB cable), but that is OK. So, the problem appears to be the eSATA port on the card itself, as it is not working under Windows XP as well. Anyway, thanks for the help and for developing the kext! Link to comment Share on other sites More sharing options...
emig647 Posted August 25, 2012 Share Posted August 25, 2012 FYI, this worked for me for a SYBA SD-SATA-4P with a blu-ray drive on port 0. Thank you!!!! Link to comment Share on other sites More sharing options...
maleorderbride Posted September 19, 2012 Share Posted September 19, 2012 I installed this on a 10.7.4 build and I do not see any extra drivers or entries under System Profiler. I am using a rosewill (re-branded Sil3114) controller. Does this work on Lion for anyone else? Link to comment Share on other sites More sharing options...
SnoopKatt Posted September 20, 2012 Share Posted September 20, 2012 I use this card on Lion: http://www.amazon.com/VT6421A-3-Port-SATA-Controller-Support/dp/B000YMJ6ZE/ref=sr_1_1?ie=UTF8&qid=1348119966&sr=8-1&keywords=via+6421 With the kext, it works flawlessly. Link to comment Share on other sites More sharing options...
thanasis19994 Posted January 18, 2013 Share Posted January 18, 2013 hello, my hackintosh finally recognized my ide dvd-rom after installing applepciide.kext so many thanks for this! But there's another issue: i can write cds without a problem but when it comes to dvds when it starts writing for ex. an .dmg the light of the drive starts blinking for about 3-4 secs and then it stops and the procedure 'freezes' at 0%. (I ve been waiting for over half an hour) Any help would be appreciated! Thanks Link to comment Share on other sites More sharing options...
eversynth Posted June 11, 2013 Share Posted June 11, 2013 Replying to say that this works on Mountain Lion 10.8.3 with a Via VT6421a (2 sata ports, pata not tested). Thanks for this driver! Link to comment Share on other sites More sharing options...
@ROBASEFR Posted October 19, 2013 Share Posted October 19, 2013 This kext v.1.03 is working for me in /System/Extensions on Mavericks GM (ATA DVD drive) ApplePCIIDE.kext.zip Good luck 5 Link to comment Share on other sites More sharing options...
d.o.n.g.h.w.a.n Posted December 19, 2013 Share Posted December 19, 2013 Thanks for the v.1.03. Works perfectly with Mavericks 10.9.1 and Silicon Image Sil680 Link to comment Share on other sites More sharing options...
@ROBASEFR Posted December 22, 2013 Share Posted December 22, 2013 This kext v.1.03 is working for me in /System/Extensions on Mavericks GM (ATA DVD drive) ApplePCIIDE.kext.zip Good luck For me with 10.9.1 doesn't work any more ! Changed to Clover r2654 and 10.9.2 is ok now ! Works on OSX 10.10 DP1 to 5 ! (Put in S/L/E) Works on OSX 10.10.2 up to Beta 5 ! Injected by CLOVER ! Works still on OSX 10.11 (Injected by CLOVER !) 1 Link to comment Share on other sites More sharing options...
rvg Posted December 2, 2014 Share Posted December 2, 2014 Works perfect on ASUS P5GC-MX 10.9.5 Link to comment Share on other sites More sharing options...
nexus77777 Posted April 18, 2015 Share Posted April 18, 2015 Hi could someone re-up version 1.03 ? Thanks... Link to comment Share on other sites More sharing options...
4everAnoob Posted April 19, 2015 Share Posted April 19, 2015 Hi could someone re-up version 1.03 ? Thanks... I second this!!! I can't use kernelcache with v1.01 (although it may be something else causing this issue...) EDIT: was using a different kext, v1.01 works perfectly for me Link to comment Share on other sites More sharing options...
liujianwei Posted September 14, 2015 Share Posted September 14, 2015 This kext v.1.03 is working for me in /System/Extensions on Mavericks GM (ATA DVD drive) ApplePCIIDE.kext.zip Good luck Thank you,the only things make my JMB363 PIONEER DVD-RW DVR-118L works on 10.9.5 in /Volumes/EFI/EFI/CLOVER/kexts/10.9 Link to comment Share on other sites More sharing options...
djanoux Posted September 28, 2015 Share Posted September 28, 2015 This kext v.1.03 is working for me in /System/Extensions on Mavericks GM (ATA DVD drive) ApplePCIIDE.kext.zip Good luck work great...in osx 10.10.5 thank you Link to comment Share on other sites More sharing options...
Recommended Posts