mwkchan Posted November 10, 2009 Share Posted November 10, 2009 I can now identify clearly the incompatibility : - If you boot 10.6.2 with a 1080p (1920x1080) HDMI 16:9 TV, plugged as main or secondary display, you will get a black screen. - If you plug it while the computer is running it will freeze. It should affect the real Macs too if that is the case. Link to comment Share on other sites More sharing options...
hashmet Posted November 10, 2009 Share Posted November 10, 2009 It should affect the real Macs too if that is the case. It's just a guess, but maybe OS X is going to support HD (BlueRay for example). So it would make sense, that you can't watch your (HD) films on a TV as easy as you are used to. I think we cannot conclude this topic without knowing if this effect also takes place on a real mac. Link to comment Share on other sites More sharing options...
Bidule200 Posted November 10, 2009 Author Share Posted November 10, 2009 - I'm sure it's affecting real MacPro with a PC's 8800GT ; - Maybe it's affecting real MacPro with Apple officiel 8800GT ; - Maybe it's affecting all Mac with an nVidia card... but probably not. Link to comment Share on other sites More sharing options...
Siobhan Posted November 10, 2009 Share Posted November 10, 2009 I can confirm that replacing NVDAResman.kext (6.0.6) and NVDANV50Hal.kext (6.0.6) with versions from 10.6.1 (6.0.2) SOLVES THE PROBLEM!! I "found" the two 10.6.1 kexts here and the NV40Hal for the older cards here. Link to comment Share on other sites More sharing options...
Smith@@™ Posted November 10, 2009 Share Posted November 10, 2009 Ok, but you can use the oceefi 10.5 with GraphicsEnabler to yes, and nothing efistring and nothing problems... sorry for my english. Ciao Link to comment Share on other sites More sharing options...
Bidule200 Posted November 10, 2009 Author Share Posted November 10, 2009 MegaUpload says that the files are not available. Link to comment Share on other sites More sharing options...
A Posted November 10, 2009 Share Posted November 10, 2009 Hey, do you have two displays connected? If yes, try to plug out one of them. I have a similar problem. I cannot use two displays (one 24" monitor and 32" HD Ready TV). hashmet same here. my hdtv is dead Link to comment Share on other sites More sharing options...
rocwiff Posted November 10, 2009 Share Posted November 10, 2009 I can confirm that replacing NVDAResman.kext (6.0.6) and NVDANV50Hal.kext (6.0.6) with versions from 10.6.1 (6.0.2) SOLVES THE PROBLEM!! I "found" the two 10.6.1 kexts here and the NV40Hal for the older cards here. Cool. I'll be sure to back those up before trying the update in case I run into problems. Thanks. Link to comment Share on other sites More sharing options...
Siobhan Posted November 10, 2009 Share Posted November 10, 2009 MegaUpload says that the files are not available. Just downloaded them myself after you said that, no problem here getting those kexts. Link to comment Share on other sites More sharing options...
A Posted November 10, 2009 Share Posted November 10, 2009 I can now identify clearly the incompatibility : - If you boot 10.6.2 with a 1080p (1920x1080) HDMI 16:9 TV, plugged as main or secondary display, you will get a black screen. - If you plug it while the computer is running it will freeze. Im so glad to read that I am not alone with this problem. I was really confused for the past 2 hours because of this. Link to comment Share on other sites More sharing options...
Siobhan Posted November 10, 2009 Share Posted November 10, 2009 Im so glad to read that I am not alone with this problem. I was really confused for the past 2 hours because of this. That's what makes this such a great community. We're all in this together. Glad we found the problem (and solution)! Link to comment Share on other sites More sharing options...
kitmac Posted November 10, 2009 Share Posted November 10, 2009 Im so glad to read that I am not alone with this problem. I was really confused for the past 2 hours because of this. Yup.... one question though. If i use the old 10.6.1 kexts am i trading off Quality for compatibility??? Link to comment Share on other sites More sharing options...
Siobhan Posted November 10, 2009 Share Posted November 10, 2009 Yup.... one question though. If i use the old 10.6.1 kexts am i trading off Quality for compatibility??? No idea what's in the 6.0.6 versions, but someone previously speculated that it might be due to potentially upcoming Blu-Ray support, hence HDCP issues over HDMI. I know for a fact that the two DVI monitors I have do not support HDCP, but all the HDMI monitors I tried and got the black screen with, do. So I am personally very much inclined to believe that theory. As to what you're "trading off" is a working monitor for a non-working one. I would go with working monitor. Perhaps netkas or some other genius will make 6.0.6 work for all of us, or perhaps it's really an Apple bug and affects Apple-branded Macs too! If that's the case, one would hope Apple themselves will fix the issue, or they'll have a lot of irate customers. Link to comment Share on other sites More sharing options...
Krot Posted November 10, 2009 Share Posted November 10, 2009 I can confirm that replacing NVDAResman.kext (6.0.6) and NVDANV50Hal.kext (6.0.6) with versions from 10.6.1 (6.0.2) SOLVES THE PROBLEM!! I "found" the two 10.6.1 kexts here and the NV40Hal for the older cards here. Yep! It's realy helped, now can watch movies on my plasma tv again Thanx! Link to comment Share on other sites More sharing options...
Bidule200 Posted November 10, 2009 Author Share Posted November 10, 2009 Is the old NVDANV40Hal.kext necessary to avoid a KernelPanic ? Or does it work with NVDANV50Hal.kext and NVDAResman.kext only ? Can I put them in /Extra/Extensions or do I have to replace /System files ? Link to comment Share on other sites More sharing options...
Krot Posted November 10, 2009 Share Posted November 10, 2009 Is the old NVDANV40Hal.kext necessary to avoid a KernelPanic ?Or does it work with NVDANV50Hal.kext and NVDAResman.kext only ? Can I put them in /Extra/Extensions or do I have to replace /System files ? For me it works well with NVDANV50Hal.kext and NVDAResman.kext only, i didn't replace a NVDANV40Hal.kext I guess that better to replace in system folder Link to comment Share on other sites More sharing options...
Bidule200 Posted November 11, 2009 Author Share Posted November 11, 2009 Thanks, everything is working now :-) Hackintosh community rocks ! Link to comment Share on other sites More sharing options...
mwkchan Posted November 11, 2009 Share Posted November 11, 2009 That's what makes this such a great community. We're all in this together. Glad we found the problem (and solution)! Not only we solve the problem together, we found satisfaction too! Link to comment Share on other sites More sharing options...
stellarola Posted November 11, 2009 Share Posted November 11, 2009 Replacing the drivers with the old ones is NOT a fix. It's a cop out. http://stellarola.tumblr.com/post/24015973...th-nvidia-cards Link to comment Share on other sites More sharing options...
Gantlett Posted November 11, 2009 Share Posted November 11, 2009 I guess I'll stick with 10.6.1 for my 8800GT 512 machine Nothing wrong with that at all Link to comment Share on other sites More sharing options...
ApexDE Posted November 11, 2009 Share Posted November 11, 2009 A Question which comes to my mind: are there real Macs with HDMI Ports? Maybe Apple just didn't take out only Atom Support? Link to comment Share on other sites More sharing options...
bellbottom Posted November 11, 2009 Share Posted November 11, 2009 I think the post is not solved. Anyone knows how to make work NVidia cards with new apple kexts (10.6.2) ? Please, tell us the method. Grets. Link to comment Share on other sites More sharing options...
A Posted November 11, 2009 Share Posted November 11, 2009 Replacing the drivers with the old ones is NOT a fix. It's a cop out. http://stellarola.tumblr.com/post/24015973...th-nvidia-cards I have to agree. Still Im glad that you can use the kexts from 10.6.1 - though it makes our systems "less vanilla" P.s I use a hdmi to dvi adapter to connect my hdtv to my system. Link to comment Share on other sites More sharing options...
kitmac Posted November 11, 2009 Share Posted November 11, 2009 Replacing the drivers with the old ones is NOT a fix. It's a cop out. http://stellarola.tumblr.com/post/24015973...th-nvidia-cards Ur right Stell.... Im hoping the community can come up with a real solution soon............ From what i understand apple is implementing HDCP because of some sort of upcoming Blue-ray feature...??????? Link to comment Share on other sites More sharing options...
hashmet Posted November 11, 2009 Share Posted November 11, 2009 Ur right Stell.... Im hoping the community can come up with a real solution soon............ From what i understand apple is implementing HDCP because of some sort of upcoming Blue-ray feature...??????? Well HDCP was just a guess in order to explain why 10.6.2 does not like HDMI. Has anyone heard anything from Apple concerning HDCP. I'm wondering why on the net there is nothing about this issue. And I still wonder how it is on a real mac. By the way. Replacing the kexts worked for me. But I agree, that this is just a temporally solution. Link to comment Share on other sites More sharing options...
Recommended Posts