GA-EX58 and GA-X58A DSDT native power management modifications

MaLd0n · March 16, 2017

I'm having an issue since installing a BCM943602CS Wifi/Bluetooth card. The problem is described here with a potential fix:

http://www.insanelymac.com/forum/topic/316815-bcm943602cs-combo-card-prevents-sleep-on-sierra/

Is there a way to accomplish the same in DSDT?

I have the bluetooth plugged into an internal header, ID with IORegExplorer is 3d000000, I believe this is USB0, also cross referencing with a photo of the motherboard, this header is identified as USB1 (usb0 & usb1?), the header next to it is labeled USB2 (usb2 & usb3?).

If this is correct then

USB0 = BT

USB1 = Front Panel USB

USB2&3 = Empty

ICH10 dont need fix USB UHCI, just inject clock id 1 in EHC1 and clock id2 in EHC2

Do not use the sensors to not affect the operation of the cooler and cooling of the computer, I use my hachintosh to edit movies and this requires a lot of the machine.

ofc, LGA1366 is a monster, old but gold

I'm having an issue since installing a BCM943602CS Wifi/Bluetooth card. The problem is described here with a potential fix:

http://www.insanelymac.com/forum/topic/316815-bcm943602cs-combo-card-prevents-sleep-on-sierra/

Is there a way to accomplish the same in DSDT?

I have the bluetooth plugged into an internal header, ID with IORegExplorer is 3d000000, I believe this is USB0, also cross referencing with a photo of the motherboard, this header is identified as USB1 (usb0 & usb1?), the header next to it is labeled USB2 (usb2 & usb3?).

If this is correct then

USB0 = BT

USB1 = Front Panel USB

USB2&3 = Empty

This is my USB0 section
Device (USB0)
            {
                Name (_ADR, 0x001D0000)
                Method (_S3D, 0, NotSerialized)
                {
                    If (LEqual (OSFL, 0x02))
                    {
                        Return (0x02)
                    }
                    Return (0x03)
                }
                Name (_PRW, Package (0x02)
                {
                    0x03, 
                    0x03
                })
            }
How can I get this port to show as internal to stop my hack waking as soon as I put it to sleep?

u can try remove...

Name (_PRW, Package (0x02)
                {
                    0x03, 
                    0x03
                })

but u lose wake from mouse in USB without _PRW

Foxic · March 16, 2017

Ok, thanks for the help Maldon. Can you think of any way to do this without losing mouse wake?

Im not sure how to go about injecting a clock id into ECH1, I don't have an ECH device. I'll post my DSDT so you can see what I mean.

DSDT.aml.zip

Rocky12 · March 16, 2017

ICH10 hp z800 for u ECH1 to EH01 EHC2 into EH02



Device (EH01)

            {

                Name (_ADR, 0x001D0007)  // _ADR: Address

                Method (_PRW, 0, Serialized)  // _PRW: Power Resources for Wake

                {

                    Name (PUE1, Package (0x02)

                    {

                        0x0D, 

                        0x03

                    })

                    If (LNot (S3AV))

                    {

                        Store (One, Index (PUE1, One))

                    }


                    Return (PUE1)

                }


                Method (_S4D, 0, NotSerialized)  // _S4D: S4 Device State

                {

                    Return (0x03)

                }


                Method (S5D, 0, NotSerialized)

                {

                    Return (0x03)

                }


                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method

                {

                    Store (Package (0x0F)

                        {

                            "device-id", 

                            Buffer (0x04)

                            {

                                 0x3A, 0x3A, 0x00, 0x00                         

                            }, 


                            "AAPL,clock-id", 

                            Buffer (One)

                            {

                                 0x0A                                           

                            }, 


                            "built-in", 

                            Buffer (One)

                            {

                                 0x00                                           

                            }, 


                            "device_type", 

                            Buffer (0x06)

                            {

                                "EH01"

                            }, 


                            "AAPL,current-available", 

                            0x04B0, 

                            "AAPL,current-extra", 

                            0x02BC, 

                            "AAPL,current-in-sleep", 

                            0x03E8, 

                            Buffer (One)

                            {

                                 0x00                                           

                            }

                        }, Local0)

                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

                    Return (Local0)

                }

            }


            Device (EH02)

            {

                Name (_ADR, 0x001A0007)  // _ADR: Address

                Method (_PRW, 0, Serialized)  // _PRW: Power Resources for Wake

                {

                    Name (PUE2, Package (0x02)

                    {

                        0x0D, 

                        0x03

                    })

                    If (LNot (S3AV))

                    {

                        Store (One, Index (PUE2, One))

                    }


                    Return (PUE2)

                }


                Method (_S4D, 0, NotSerialized)  // _S4D: S4 Device State

                {

                    Return (0x03)

                }


                Method (S5D, 0, NotSerialized)

                {

                    Return (0x03)

                }


                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method

                {

                    Store (Package (0x0F)

                        {

                            "device-id", 

                            Buffer (0x04)

                            {

                                 0x3C, 0x3A, 0x00, 0x00                         

                            }, 


                            "AAPL,clock-id", 

                            Buffer (One)

                            {

                                 0x0A                                           

                            }, 


                            "built-in", 

                            Buffer (One)

                            {

                                 0x00                                           

                            }, 


                            "device_type", 

                            Buffer (0x06)

                            {

                                "EH02"

                            }, 


                            "AAPL,current-available", 

                            0x04B0, 

                            "AAPL,current-extra", 

                            0x02BC, 

                            "AAPL,current-in-sleep", 

                            0x03E8, 

                            Buffer (One)

                            {

                                 0x00                                           

                            }

                        }, Local0)

                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

                    Return (Local0)

                }

            }

Rody Nunes · March 16, 2017

MaLd0n

I install the app Intel® Power Gadget but no running video

Rocky12 · March 16, 2017

Intel® Power Gadget does not support old cpus nothing to do specifically xeon cpus 1366

MaLd0n · March 16, 2017

ye

Ok, thanks for the help Maldon. Can you think of any way to do this without loosing mouse wake?

Im not sure how to go about injecting a clock id into ECH1, I don't have an ECH device. I'll post my DSDT so you can see what I mean.

send me ur config.plist and ioreg

http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606

Rody Nunes · March 16, 2017

I want to thank you very much for your help in resolving this problem that really bothered me.

If possible, what changes were made to DSDT to solve the problem?

Rocky12 · March 16, 2017

i can attach my dsdt you can use it as reference

Archive.zip

MaLd0n · March 16, 2017

I want to thank you very much for your help in resolving this problem that really bothered me.

If possible, what changes were made to DSDT to solve the problem?

edit ur full DSDT with good patches, essencial

u can use diff for compare

see my signature, same patches to other chipset

Rody Nunes · March 16, 2017

edit ur full DSDT with good patches, essencial

u can use diff for compare

see my signature, same patches to other chipset

What and where I find this patches?

MaLd0n · March 16, 2017

i can attach my dsdt you can use it as reference

DSDT.Rockey12.zip

LMU, u need a fakesmc mod

FakeSMC.LMU.zip

full sbus with Mikey driver

Pnlf with MCCSControl

What and where I find this patches

today is a copy of the past

u can find patches etc etc here

http://www.insanelymac.com/forum/topic/235523-dsdt-auto-patcher/

Rocky12 · March 17, 2017

thank you my friend im gonna give it a go and report back

Foxic · March 17, 2017

send me ur config.plist and ioreg

Thanks Maldon

Auto-sleep works when it feels like it, manual sleep hardly ever works. Also, sometimes when I shut the computer down it'll turn back on straight away for no apparent reason

James.zip

Rocky12 · March 18, 2017

hi MaLdon replying back since 2 days i'm using the patched dsdt what you did for me and also FakeSMC kext every thing work perfect thank you so much

i like the way you work trying to help everyone

well done Maldon :thumbsup_anim:

MaLd0n · March 18, 2017

Welcome, Bro!

Rocky12 · March 18, 2017

Dear MaLdon just one Question any chance for us to get PM with branded machine

i have patched successfully appleintelcpupowermanagement kext but PM wouldn't work properly

MaLd0n · March 18, 2017

Clover dont generate a good PM?

if no, we need back in time, calculate FID and VID / P-State

http://olarila.com/forum/viewtopic.php?f=7&t=57

:lol:

it's a joke

Rocky12 · March 20, 2017

hi maldon sorry for the disturbance im not able to fix this FID or VID thing can u please look into attach are all the SSDT files and DSDT

untitled folder 4.zip

MaLd0n · March 20, 2017

no, man

fid and vid is a old method, today dont need just a joke

what problem u have with PM

Rocky12 · March 20, 2017

when i look into IORegistry it doesn,t show that the cpu power management properly work

insanelymac’s Mac Pro.zip

MaLd0n · March 20, 2017

its work

1366 use aicpupm and not X86PlatformPlugin / X86PlatformShim

u need a low pin count load

kextstat | grep LPC

and appleintelcpupm loaded

kextstat | grep AppleIntel

run it and post here

kextstat.command.zip

Rocky12 · March 21, 2017

kextstat.command

(:

34 1 0xffffff7f8166e000 0x4000 0x4000 com.apple.iokit.IOSMBusFamily (1.1) 185F0EBF-0262-3370-BD47-8FE4C8AA726E <5 4 3>

98 1 0xffffff7f81f87000 0xe000 0xe000 com.apple.driver.AppleSMBusController (1.0.15d1) E1A1152A-1A83-3EE8-8E58-3483462779BC <34 12 11 5 4 3>

(:

97 1 0xffffff7f82159000 0x1a000 0x1a000 com.apple.driver.AppleHDAController (2.6.0f1) 75C89447-A390-3C8C-9189-3074B972B3FD <96 81 12 7 6 5 4 3 1>

116 0 0xffffff7f8225c000 0x90000 0x90000 com.apple.driver.AppleHDA (2.6.0f1) 6E9414B6-A952-3A0B-9467-DEFB73D82EAE <115 113 100 97 96 81 6 5 4 3 1>

(:

13 1 0xffffff7f823e3000 0x60000 0x60000 com.apple.driver.AppleACPIPlatform (5.0) FB729ABB-093F-386D-8A99-0CC2D2F39B6E <12 11 7 6 5 4 3 1>

39 0 0xffffff7f82453000 0x4000 0x4000 com.apple.driver.AppleACPIButtons (5.0) A0FF1F0B-F2A9-3DC9-8983-2F1382815828 <38 15 13 11 7 6 5 4 3 1>

(:

Index Refs Address Size Wired Name (Version) UUID <Linked Against>

25 0 0xffffff7f8306b000 0x19000 0x19000 org.netkas.driver.FakeSMC (1421) 8252BBE6-2A73-35AC-919C-10AF2BE3909B <11 7 5 4 3 1>

89 0 0xffffff7f80c11000 0x4000 0x4000 com.intel.driver.EnergyDriver (2.0) 4E0262A2-B79C-3386-8824-C106A5DFAF94 <7 5 4 3>

117 0 0xffffff7f81c5f000 0x6000 0x6000 org.tw.CodecCommander (2.4.0) 7134FF3E-A6B0-36CE-9817-D33B255AD9E7 <113 12 4 3 1>

(:

92 0 0xffffff7f81fd2000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <91 12 5 4 3>

(:

24 0 0xffffff7f820ab000 0x2b000 0x2b000 com.apple.driver.AppleIntelCPUPowerManagement (219.0.0) DA42A380-2795-392D-96A7-356FAB75E0A4 <7 6 5 4 3 1>

31 0 0xffffff7f820a6000 0x3000 0x3000 com.apple.driver.AppleIntelCPUPowerManagementClient (219.0.0) B802638B-251C-3602-BA8C-001F87228765 <7 6 5 4 3 1>

88 0 0xffffff7f82053000 0x2000 0x2000 com.apple.driver.AppleIntelSlowAdaptiveClocking (4.0.0) 6FE984DD-A1FE-309E-83CF-B346989A6F17 <87 4 3>

(:

32 0 0xffffff7f823b1000 0x3000 0x3000 com.apple.driver.AppleAPIC (1.7) BC2E6D01-BCBB-3525-BF38-BF99C3F1EC46 <4 3>

(:

123 0 0xffffff7f820e7000 0xa000 0xa000 com.apple.driver.AppleHV (1) B18CFD59-98DB-32E6-8FBE-947F898E81D6 <7 6 5 4 3 1>

kextstat | grep LPC

92 0 0xffffff7f81fd2000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <91 12 5 4 3>

kextstat | grep AppleIntel

24 0 0xffffff7f820ab000 0x2b000 0x2b000 com.apple.driver.AppleIntelCPUPowerManagement (219.0.0) DA42A380-2795-392D-96A7-356FAB75E0A4 <7 6 5 4 3 1>

31 0 0xffffff7f820a6000 0x3000 0x3000 com.apple.driver.AppleIntelCPUPowerManagementClient (219.0.0) B802638B-251C-3602-BA8C-001F87228765 <7 6 5 4 3 1>

88 0 0xffffff7f82053000 0x2000 0x2000 com.apple.driver.AppleIntelSlowAdaptiveClocking (4.0.0) 6FE984DD-A1FE-309E-83CF-B346989A6F17 <87 4 3>

MaLd0n · March 21, 2017

24 0 0xffffff7f820ab000 0x2b000 0x2b000 com.apple.driver.AppleIntelCPUPowerManagement (219.0.0) DA42A380-2795-392D-96A7-356FAB75E0A4

31 0 0xffffff7f820a6000 0x3000 0x3000 com.apple.driver.AppleIntelCPUPowerManagementClient (219.0.0) B802638B-251C-3602-BA8C-001F87228765

92 0 0xffffff7f81fd2000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E

its nice

but, how to check frequency in lga 1366?

try a AppleIntelInfo by Pike

put in desktop

AppleIntelInfo.kext.zip

and run

sudo chown -R 0:0 ~/Desktop/AppleIntelInfo.kext

sudo chmod -R 755 ~/Desktop/AppleIntelInfo.kext

sudo kextload ~/Desktop/AppleIntelInfo.kext

and for full log

sudo cat /tmp/AppleIntelInfo.dat

Rocky12 · March 21, 2017

sorry maldon but got kernel panic when i install AppleIntelInfo.kext

MaLd0n · March 21, 2017

no Intel Power Gadget

no AppleIntelInfo.kext

but works, i see in ioreg

GA-EX58 and GA-X58A DSDT native power management modifications

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites