shockre Posted November 18, 2009 Share Posted November 18, 2009 new sleepenabler doesnt work with old kernel Link to comment Share on other sites More sharing options...
leras Posted November 19, 2009 Share Posted November 19, 2009 i would like to thank you alot a thousand thank you i just managed to load 10.2.0 darwin in my hp 6543 laptop now i have alc 268 working touchpad working wifi working since i have atheros card extra installed beyound the system so first ihad 10.6.2 with 10.0.0 as many of you, but i tried this one i reinstaled MacOSXUpdCombo10.6.2.dmg but i didnt restart then i execute myHack_Installer_1.0_RC4.1_r55.mpkg (please select costumize and choose your options i didnt select sleepenabler)after execution finished i copy and paste the above sleepenabler kext to my extra extensions folder and i hit restart .after restart all work with 10.2.0 thanks again Link to comment Share on other sites More sharing options...
joealanjones Posted November 23, 2009 Share Posted November 23, 2009 I stupidly updated to 10.6.2 without checking around first and I'm getting the sleepenabler kp. I managed to delete the kext by sticking my hdd in my windows pc and using MacDrive. But even without the kext i still get the kp. What am I doing wrong? I saw somewhere that I may need to rebuild the extentions.mkext but how can I do that without a functioning osx partition? As you can tell I'm a complete noob. I was actually suprised with how flawlessly my hackintosh has worked up until this point. Any help would be much appreciated. Link to comment Share on other sites More sharing options...
shockre Posted November 23, 2009 Share Posted November 23, 2009 I stupidly updated to 10.6.2 without checking around first and I'm getting the sleepenabler kp. I managed to delete the kext by sticking my hdd in my windows pc and using MacDrive. But even without the kext i still get the kp. What am I doing wrong? I saw somewhere that I may need to rebuild the extentions.mkext but how can I do that without a functioning osx partition? As you can tell I'm a complete noob. I was actually suprised with how flawlessly my hackintosh has worked up until this point. Any help would be much appreciated. when you add or remove kexts you always have to rebuild caches or it will KP. boot with usb chameleon with -x to enter safe mode and then put new sleepenabler.kext for 10.6.2 and rebuild caches. Link to comment Share on other sites More sharing options...
jeffrey1790 Posted November 23, 2009 Share Posted November 23, 2009 For those at whom restart after a sleep this didnt work. Link to comment Share on other sites More sharing options...
teknokracy Posted December 13, 2009 Share Posted December 13, 2009 I tried booting using -x and I still get the same KP. The SleepEnabler doesn't even exist anymore in S/L/E... is there a way to rebuild using a different Mac or Hackintosh? Link to comment Share on other sites More sharing options...
sqalg Posted December 13, 2009 Share Posted December 13, 2009 Hello I done the 10.6.2 update directly from SnowLoepard with the Apple Software update. I rebooted the computer and KernerPanic. So , I installed MacDrive (genius software) on My Windows 7 , I deleted SleepEnabler.ktext and I copied the new one. I rebooted on Snow Leopard without KernalPanic ==>> coool I installed Ilfie09 and the SL decided to reboot again the computer after this installation. After this reboot , there is again a kernalPanic when SnowLeopard tried to boot. I have this issue but I don't know really why ? Maybe somebody have any suggestion ? Link to comment Share on other sites More sharing options...
sqalg Posted December 13, 2009 Share Posted December 13, 2009 Hello I done the 10.6.2 update directly from SnowLoepard with the Apple Software update. I rebooted the computer and KernerPanic. So , I installed MacDrive (genius software) on My Windows 7 , I deleted SleepEnabler.ktext and I copied the new one. I rebooted on Snow Leopard without KernalPanic ==>> coool I installed Ilfie09 and the SL decided to reboot again the computer after this installation. After this reboot , there is again a kernalPanic when SnowLeopard tried to boot. I have this issue but I don't know really why ? Maybe somebody have any suggestion ? Solved ! In fact I deleted /Extra/Extensions/fakesms.kext and replaced it by the new one in this forum (fakesmc v2 in google ..) Link to comment Share on other sites More sharing options...
roberdo Posted December 15, 2009 Share Posted December 15, 2009 Using Gigabyte g41m-e2sl this kext works for me. However it appears that CPU (Core 2 Duo, 8200) runs hotter than before, about 40-50 degrees - even when CPU load is less than 30%. Do you think this is normal? UPDATE: Sleepenabler works perfect, high temperature was cpu-load caused by spotlight and new attached HD. Link to comment Share on other sites More sharing options...
justgeeking Posted January 1, 2010 Share Posted January 1, 2010 I got the KP also but i have a ATI xt 2600 pro pci e card so i was way behind the curver after i did the 10.6.2 upgrade to nektas fakesmc v.2 drop it in dumped all my ati card drivers and swap them out from my 10.6 usb stick redid permissions and im doing fine and i threw a old realtek 1000 driver cause everytime i did the update it killed my eithernet then ran kext utilty and im writting u from the machine. ep43 ud3l q6600 saffire xt 2600 now QE is the next move. u dont have to bother your windows 7 drive like other guys do,, good luck with your build im sure u will get it to werk... happy new year Justgeeking Link to comment Share on other sites More sharing options...
drbee Posted January 1, 2010 Share Posted January 1, 2010 Hi, I am getting KP with new sleepenabler right after it loads at boot but only in 64bit mode. If I boot in 32bit works perfect. Anyone has any Idea why this could happen? Thanks Link to comment Share on other sites More sharing options...
CleitonHipolito Posted January 22, 2010 Share Posted January 22, 2010 The New SleepEnabler works better with darwin 10.2, some troubles with 10.0 Try to update installing myHack_Installer_1.0_RC4.1_r55.mpkg.zip Please, note your kexts used in Extra/Extensions Folder, installing exaclty as once, but replacing the sleepenabler with the new one at this page. Link to comment Share on other sites More sharing options...
tle88 Posted January 26, 2010 Share Posted January 26, 2010 Google: 10.6.3 sleepenabler My old 945 GNTLKR with D945 Pentium works well with annappirtrvh v2 -kernel, 10.6.3 sleepenabler, new fixed IOATAfamily kext (have one ide) and last fakesmc.kext. This 3 kext and modified kernel is necessary. (and last chameleon of course) Sigmatel 9220 works with VoodooHDA 0.2.51 and sata yellow icon is fixed with ahciportinjector and ioahciblockstorageinjector. Everything else is vanilla. Tuure -.- Link to comment Share on other sites More sharing options...
betito Posted February 5, 2010 Share Posted February 5, 2010 I updated my 10.6.1 to 10.6.2. I updated the sleepenabler.kext which works to the point that I don't see any KPs. However, I get no video pass the apple bootup screen... screen goes black after the spinning gear. On 10.6.1 I enabled my nVidia 8800GT 512MB with EFI, so I am not sure if the problem is caused by the sleepenabler.kext or by some other thing on 10.6.2. Has anyone seen something similar? Sorry if it is the EFI string... did not mean to post on the wrong thread. Link to comment Share on other sites More sharing options...
Frogfeet Posted February 7, 2010 Share Posted February 7, 2010 thanks for this netkas. i'm about to upgrade to sl and will use this. cheers from rainy paris Link to comment Share on other sites More sharing options...
Frattaglia Posted February 9, 2010 Share Posted February 9, 2010 No more KP on SL 10.6.2 it seems to work to me... but it really doesn't go to sleep, go wake but i try to see an .avi or listen some music, the audio doesn't work properly. some strange noise over. anybody has an idea to how to fix this? i use voodooHDA.kext Link to comment Share on other sites More sharing options...
Proxin Posted February 9, 2010 Share Posted February 9, 2010 Thought this worked for me too, but when I "wake up" my Snow Leopard, I don't see the mouse. Sometimes the OSX error sound loops as well. Link to comment Share on other sites More sharing options...
joedr Posted February 10, 2010 Share Posted February 10, 2010 It does not work for me on 10.6.2 and a P5K-VM Mobo. Link to comment Share on other sites More sharing options...
future_former Posted February 17, 2010 Share Posted February 17, 2010 Hi folks ! I can't find sleepenabler.* files on my OS X 10.6 partition... where do I have to copy the files from netkas to ??? I also can't find AppleIntel*.* on my OS X 10.6 partition... can anyone tell me how to delete the requested files and bring 10.6.2 to boot again ? I updated a running 10.6 vanilla installation to 10.6.2 and I got kernel panics while booting, KP on sleepenabler and can't find any files to remove/replace with sleepenabler from netkas... Any help would be great !!! :-) future_former Link to comment Share on other sites More sharing options...
mrbonkers Posted February 18, 2010 Share Posted February 18, 2010 my CPU would be at 100% Link to comment Share on other sites More sharing options...
jamesah Posted February 18, 2010 Share Posted February 18, 2010 this worked wonderfully for me. thanks! I had to go into system prefs under energy sharing and enable awake on power failure but now it's all dandy. Link to comment Share on other sites More sharing options...
Lorennz Posted February 21, 2010 Share Posted February 21, 2010 Can someone please guide me to get this updated on my hack. I have Hazard 10.6.2 works great on my Acer 4810T timeline laptop except "Sleep". I have all the kexts required installed too but it does not work. When I click "Sleep", I hear the hard disk spins down and at the same time it freezes my laptop. Noting happens from there and I have to do a hard shutdown and then restart. Please I need someone's help so badly. This is the only thing annoying me so far on this beauty. Thanks in advance...// Link to comment Share on other sites More sharing options...
The Sauce Posted February 22, 2010 Share Posted February 22, 2010 Were U mentioning me in this post Digital? LOL I'd assume this SE update is backward compatible with the older kernel versions of SL? MAJ Edit: Just saw post above after posting. Guess I'd better keep both just in case. So, ouch. These updates are going to get a little tricky for those who don't RTFM! Expect more noobiies and KPs! Link to comment Share on other sites More sharing options...
Northern Paladin Posted February 25, 2010 Share Posted February 25, 2010 For those at whom restart after a sleep I have a EP45-UDP3 at 10.6.2 and systems goes to sleep but the does not wake properly (it does the looping restart thing on wakeup... UD3P owners will know what I am talking about) Also, I don't have the optoin "Startup Automatically after a power failure" Anyone know how I get this option back (or what might cause it not to be there)? Could this be related to the problem of not waking properly from sleep? Thanks Link to comment Share on other sites More sharing options...
riws Posted February 25, 2010 Share Posted February 25, 2010 AppleLPC.kext not loaded? Link to comment Share on other sites More sharing options...
Recommended Posts