roykovsky Posted January 3, 2010 Share Posted January 3, 2010 got any luck with Mobility X1300? I'm downloading iPC now, should be downloaded in 6h. I believe this method works! So, I have a question. In installation, do I need to choose any of drivers for graphics? Thanks a lot Link to comment Share on other sites More sharing options...
super_engine Posted January 3, 2010 Share Posted January 3, 2010 got any luck with Mobility X1300? I'm downloading iPC now, should be downloaded in 6h. I believe this method works! So, I have a question. In installation, do I need to choose any of drivers for graphics? Thanks a lot No. Do not install. Make a cle an installation and after follows this guide. Link to comment Share on other sites More sharing options...
roykovsky Posted January 3, 2010 Share Posted January 3, 2010 No. Do not install. Make a clean installation and after follows this guide. Thank you So, another question. I don't have windows and I don't want to install it now just to get EDID information. I'm using Ubuntu Linux right now - anyone have some tool to get EDID in linux? read-edid doesn't work properly, because it's formatted a way different than in this tutorial... Or should I get EDID information when I will have MacOS installed? If so, how to do this? Link to comment Share on other sites More sharing options...
quicker Posted January 4, 2010 Share Posted January 4, 2010 Hello everyone, I stumbled across the following forum post yesterday (http://www.insanelymac.com/forum/index.php?showtopic=192792) and, while it was for the x1350, I attempted the same steps applied to the x1400...and it worked! So this is what I did. I've tested this with 10.5.7 iAtkos and iDeneb versions. My laptop is an Acer 5672. 1. Download the ATI_Kexts.zip file from here or the aforementioned forum post and extract it. 2. Using any text editor, edit the info.plist file from ATIRadeonX1000.kext and change the following string: from 0x71961002 to 0x71451002 (because the dev id for the Mobility x1400 is 7145. It's 7196 for the x1350. 3. Download a freeware program called softMCCS. This is used to extract your EDID information for placement inside the RadeonHD.kext info.plist. 4. Once downloaded, launch softMCCS and go to file->save EDID as->choose file type "viewsonic EDID file"->save your edid.dat. 5. Open this edid.dat file with any text editor, and remove all the white space from the beginning of the file, and remove the headers and columns (so essentially, you're left with rows and columns of xx data). Now format all of these xx data bits into groups of 8 followed by a space, so you basically have 32 chunks of xxxxxxxx data (xxxxxxxx xxxxxxxx etc...). See the attached files for my modified versions. Heck, these files might even work for you. 6. Now that we've got our modified .dat file, copy and paste all of the 32 chunks, and paste them into the RadeonHD.kext info.plist file, under the section <key>EDID</key><data> 7. Install either flavour of OSX (might work with other versions but I haven't tested this yet). Using the free program KextHelper, first install your modified ATIRadeonX1000.kext, repair disk permissions using Disk Utility, and reboot. 8. Again using KextHelper, then install your modified RadeonHD.kext, repair disk permissions, and reboot. If you get a kernel panic, reboot using -v -f commands. 9. If all boots well, you should now be able to change your screen resolution to 1280 x 800 with QE/CI. The only problem I have now is mouse tearing. But I'm sure that's an easy fix. I just haven't looked into it. Let me know how it goes for you! UPDATE: I've created a PDF guide with images for the above steps. Let me know what you think! Hi, is there any chance for x1450? I tried but no work. If I use SwithResX on MAC I get a different EDID than softMCCS in Seven. Which one do I have to use? Grazie! Link to comment Share on other sites More sharing options...
chronosxx Posted January 5, 2010 Share Posted January 5, 2010 Can also confirm this works on Snow Leopard with a X1400 card. ...and can confirm that the X1400 works on a E1705 (probably a 9400) @ 1920x1200x32, as well, with QE, on the laptop panel, if available. Still working on: 1) Core Duo issue as VoodooTSC is being rejected by the kernel 2) Display and Computer Sleep do not function correctly Working: 1) Wireless Ethernet 2) Wired Ethernet 3) DVD movies (Using Front Row) 4) Battery state 5) Bluetooth 6) HD Audio 7) SD card reader 8) ATI X1400 graphics @ 1920x1200x32 QE-enabled 9) Mouse, keyboard, trackpad scrolling, yadda, yadda, yadda... OSX10.5.7_X1400Working.tiff Link to comment Share on other sites More sharing options...
ZKO Posted January 9, 2010 Share Posted January 9, 2010 Hey guys, i did all that we can see in this instruction in order to launch my radeon x1400 native resolution and qe. Now i have 1400x900 and qe is enabled. But i cann't use 3d app. for example chess or different games or app. Is it really to launch 3d games using this radeonhd and x1000 drivers. Somebody use x1400 to play games, use the dvd player? (dell inspiron 9400 + i'deneb 10.5.8) Link to comment Share on other sites More sharing options...
nickzhu Posted January 22, 2010 Share Posted January 22, 2010 It doesn't work on my x1400 on E1505, I can get into the system, but the screen looks like this If I start with -v, i can't get into the system I can see Mac drive on Windows 7. Do I delete the Ati and Radon Kext from system/library/extension, and delete cache? But after I did this, I cannot get in the system. Link to comment Share on other sites More sharing options...
mascarpone films Posted January 22, 2010 Share Posted January 22, 2010 Hi guys, think you can help with this matter. Dell Inspiron 9400/E1705 ati radeon X1400 working fine on laptop´s lcd, but I need to work with 2 external lcds (extended desktop) without using (turning off) the Dell´lcd. I see the desktop on both external panels (1680x1050) but cant get the extended desktop...I see both with the desktop (mirror) and the dell lcd does not turn off IDENEB leopard 10.5.8 everything working fine but this. Core 2 duo 2 gb ram. Thanks Link to comment Share on other sites More sharing options...
WandaL Posted February 6, 2010 Share Posted February 6, 2010 ATI Mobility radeon X1400 runs gr8 with this kexts full resolution with QE/CI and hardware acceleration on Leopard 10.5.8. Even latest radeonHD kext removes mouse tearing completely. However, using these kexts with Snow Leopard 10.6.2 gives full resolution but no QE/CI or hardware acceleration. Anyone got QE/CI working in Snow Leo using this on mobility x1400? Link to comment Share on other sites More sharing options...
jonwang Posted February 9, 2010 Share Posted February 9, 2010 <br />ATI Mobility radeon X1400 runs gr8 with this kexts full resolution with QE/CI and hardware acceleration on Leopard 10.5.8.<br />Even latest radeonHD kext removes mouse tearing completely.<br />However, using these kexts with Snow Leopard 10.6.2 gives full resolution but no QE/CI or hardware acceleration.<br /><br />Anyone got QE/CI working in Snow Leo using this on mobility x1400?<br /><br /><br /><br />me too Link to comment Share on other sites More sharing options...
michaspoli Posted February 12, 2010 Share Posted February 12, 2010 SL-Server Kextfiles!!! Now i have a fully working X1400mobility on an Snowleopard Retail 10.6.2 I have the same Problem with snowleopard - no QE / CI. I have full resolution, can change resolution, but cannot make screenshots. ************************************************************* Now i have a fully working X1400mobility on an Snowleopard Retail 10.6.2 QE / CI working and OpenGL working. FrontRow works. Screensaver works. Screenshots works. Here my KextPackage. Spo´s Lenovo R60 kext Package Important kextfiles:RadeonHD.kext, ATIX1400Radeon.kext, ATISupport.kext Link to comment Share on other sites More sharing options...
RCKSTr Posted February 13, 2010 Share Posted February 13, 2010 Hi guys, I just installed OS X 10.5.7 from the iATKOS v7 disc, it works great now. However, I had to re-install because after following the guide on the first page, my PC didn't boot properly. I got to the Apple logo with the spinning wheel but it just stayed there. Another attempt saw it get past that screen and onto a blue screen with a spinny wheel. However, the wheel just kept appearing and disappearing every ten seconds or so... :-( Does anyone have any advice? I really want 1280*800! I'm typing this from my "Mac" atm, 1024*768... Yuck... Here's my laptop specs: Dell Inspiron 6400 Core 2 Duo 2.0 GHz 2GB RAM ATI X1400 Thanks very much. :-) Link to comment Share on other sites More sharing options...
s77 Posted February 27, 2010 Share Posted February 27, 2010 YEESSS!!!! Dell 9400 1.83 C2D 4 GB DDR2 x1400 ITS WORK!!! TY!!! Link to comment Share on other sites More sharing options...
ugie Posted March 2, 2010 Share Posted March 2, 2010 Big Thanks michael with your kext my dell 6400 ati x1400 fully working on snow leopard 64bit frontrow is OK, only games I cannot play Link to comment Share on other sites More sharing options...
nazorey Posted March 10, 2010 Share Posted March 10, 2010 9. If all boots well, you should now be able to change your screen resolution to 1280 x 800 with QE/CI. The only problem I have now is mouse tearing. But I'm sure that's an easy fix. I just haven't looked into it. Let me know how it goes for you! Hi, insaneguy! Big thanx to u for your work. Now my x1400 is working, and I can change resolution. But my QE is still unavailable. I suppose, because of this I have my VLC and DVD players don't start. You know, I read somewhere I must have ATIRadeonX1000GA.plugin coming alone with the ATIRadeonX1000.kext in the Extensions folder to make QE is available. So could u please upload here your additional ATIRadeonX1000 stuff? If you have it, of course Link to comment Share on other sites More sharing options...
outtaBass Posted March 10, 2010 Share Posted March 10, 2010 First of all Thanx To 'ss_insaneguy' 4 this great guide! I tried this already a few month ago, but had to use the 'Mouselocater'-method because of heavy tearing...today I tried again with Michael's kexts and this works on my T60p w/ full res & without mouse tearing! Does anybody have an idea how to mirror the display to a second (external) display? Any suggestions would B appreciated.... cheers, 'a' newbie ;-] Link to comment Share on other sites More sharing options...
elvisv Posted April 27, 2010 Share Posted April 27, 2010 Now i have a fully working X1400mobility on an Snowleopard Retail 10.6.2QE / CI working and OpenGL working. FrontRow works. Screensaver works. Screenshots works. Here my KextPackage. Spo´s Lenovo R60 kext Package Important kextfiles:RadeonHD.kext, ATIX1400Radeon.kext, ATISupport.kext Is there something speacial to do to make it work on Snow Leo? Delete any kext or something like that? I Cant Get x1400 working full screen. It works as well in iAtkos 10.5.7. I have Snow Leopard 10.6.2 Retail installed, It boots up fine. Any help apreceated. Thanks in Advice, Dell E1505/6400 Ati Mobility x1400 (Only 1024x768) However, QE / CI Enabled with Mouse tearing. (Used ur kexts) Snow Leopard 10.6.2 Retail Core 2 Duo Link to comment Share on other sites More sharing options...
michaspoli Posted April 27, 2010 Share Posted April 27, 2010 Original Snowleopard ATIRadeonX1000.kext - only added the correct DEV_ID. RadeonHD from Madchicken in Corp. with Dong (Thanks to you!!!) with added my EDID. Without the edited EDID - i loose my curser. You can extract the EDID with SwitchResX DDC block report generated by SwitchResX version 4.1.1 for display Unbekannter Bildschirm 00FFFFFF FFFFFF00 00001707 00000000 0A0A0101 0C1E17BE E82DC9A0 57479827 12484C00 00000101 01010101 01010101 01010101 01010000 00FE0053 52584661 6B654544 49440A20 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 0101005A Here my Kextpackage for 10.6.3. Link to comment Share on other sites More sharing options...
elvisv Posted April 27, 2010 Share Posted April 27, 2010 Original Snowleopard ATIRadeonX1000.kext - only added the correct DEV_ID. RadeonHD from Madchicken in Corp. with Dong (Thanks to you!!!) with added my EDID. Without the edited EDID - i loose my curser. You can extract the EDID with SwitchResX DDC block report generated by SwitchResX version 4.1.1 for display Unbekannter Bildschirm 00FFFFFF FFFFFF00 00001707 00000000 0A0A0101 0C1E17BE E82DC9A0 57479827 12484C00 00000101 01010101 01010101 01010101 01010000 00FE0053 52584661 6B654544 49440A20 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 0101005A Here my Kextpackage for 10.6.3. Thanks Man. Happy Day now!!! Full Resolution now on 10.6.2. Can update normal from 10.6.2 to 10.6.3? And then install 10.6.3 Kexts? Dell Inspiron E1505/6400 Ati Mobility x1400 (Full Resolution 1280x800) QE / CI Enabled without Mouse tearing (Perfect!!!) Snow Leopard 10.6.2 Client/Server by Hazard Core 2 Duo Link to comment Share on other sites More sharing options...
gadgetsboyj Posted May 9, 2010 Share Posted May 9, 2010 Original Snowleopard ATIRadeonX1000.kext - only added the correct DEV_ID. RadeonHD from Madchicken in Corp. with Dong (Thanks to you!!!) with added my EDID. Without the edited EDID - i loose my curser. You can extract the EDID with SwitchResX DDC block report generated by SwitchResX version 4.1.1 for display Unbekannter Bildschirm 00FFFFFF FFFFFF00 00001707 00000000 0A0A0101 0C1E17BE E82DC9A0 57479827 12484C00 00000101 01010101 01010101 01010101 01010000 00FE0053 52584661 6B654544 49440A20 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 01010101 0101005A Here my Kextpackage for 10.6.3. Installed your 2 kext files and it makes my cursor disappears and I see green lines instead even after replacing EDID. Resolution change works, but Quartz Extreme doesn't and no cursor so I'm getting rid of them for now. EDIT: Unchecked enableHWCursor in RadeonHD.kext's Info.plist and it seems to have fixed it, but I still get no QE/CI. My entire System Profiler output under Graphics/Displays is: Mobility Radeon X1400: Chipset Model: Mobility Radeon X1400 Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7145 Revision ID: 0x0000 Displays: Unknown Monitor: Resolution: 1440 x 900 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Any clue what's wrong and why Quartz Extreme isn't working? Yeah, be sure not to make a copy of your old ATIRadeonx1400 kext and leave it there. It messed me up. Using your instructions, I have it working with resolution change and Quartz Extreme. Thank you SO MUCH. Link to comment Share on other sites More sharing options...
elvisv Posted May 17, 2010 Share Posted May 17, 2010 Working perfect now on 10.6.3, but experiencing some mouse/cursor problems, (don't know if it happened to anyone else) it disappears sometimes on software like Messenger, Office, and some other i don't remember right now. It gets very annoying! Any help appreciated, Thanks in advice. Everything else is smooth and perfect. --- Dell Inspiron E1505/6400 Ati Mobility x1400 (Full Resolution 1280x800) QE/CI Enabled without Mouse tearing (Perfect!!!) Snow Leopard 10.6.3 Core 2 Duo Link to comment Share on other sites More sharing options...
michaspoli Posted May 17, 2010 Share Posted May 17, 2010 Maybe,you forgot to add the EDID to the RadeonHD.kext. Then should all be fine,without the sleepmode. Working perfect now on 10.6.3, but experiencing some mouse/cursor problems, (don't know if it happened to anyone else) it disappears sometimes on software like Messenger, Office, and some other i don't remember right now. It gets very annoying! Any help appreciated, Thanks in advice. Everything else is smooth and perfect. --- Dell Inspiron E1505/6400 Ati Mobility x1400 (Full Resolution 1280x800) QE / CI Enabled without Mouse tearing (Perfect!!!) Snow Leopard 10.6.2 Client/Server by Hazard Core 2 Duo Link to comment Share on other sites More sharing options...
elvisv Posted May 17, 2010 Share Posted May 17, 2010 Maybe,you forgot to add the EDID to the RadeonHD.kext. Then should all be fine,without the sleepmode. I finally solved my problem. For anyone experiencing the same problem... I downloaded the RadeonHD.kext (05/13/2010) from topic http://www.insanelymac.com/forum/index.php?showtopic=190586 Simply copied the info.plist from the contents folder of the RadeonHD I had to the one from the topic, and now, problem solved. Just wanted to share. Thanks Michael --- Dell Inspiron E1505/6400 Ati Mobility x1400 (Full Resolution 1280x800) QE/CI Enabled without Mouse tearing (Perfect!!!) Snow Leopard 10.6.3 Core 2 Duo Link to comment Share on other sites More sharing options...
tebats Posted May 19, 2010 Share Posted May 19, 2010 I finally solved my problem. For anyone experiencing the same problem... I downloaded the RadeonHD.kext (05/13/2010) from topic http://www.insanelymac.com/forum/index.php?showtopic=190586 Simply copied the info.plist from the contents folder of the RadeonHD I had to the one from the topic, and now, problem solved. Just wanted to share. Thanks Michael --- Dell Inspiron E1505/6400 Ati Mobility x1400 (Full Resolution 1280x800) QE/CI Enabled without Mouse tearing (Perfect!!!) Snow Leopard 10.6.3 Core 2 Duo I have tried this on IBM T60 with 1400x1050 on 10.6.3 and NO mouse tearing but DVD Player doesn't work and FrontRow complained about incorrect or unknown video format. DVD player and FrontRow works if I don't install RadeonHD.kext but with mouse tearing. Any Ideas? Thanks! Link to comment Share on other sites More sharing options...
roykovsky Posted May 23, 2010 Share Posted May 23, 2010 hey, anyone tried this on mobility x1300? does it work? it's the same graphic's core, so it should work... Link to comment Share on other sites More sharing options...
Recommended Posts