aikidoka25 Posted September 26, 2016 Share Posted September 26, 2016 I use this Apple HDA patcher 1.5 wich is about the same method as Toleda https://github.com/toleda/audio_CloverALC AppleHDA Patcher.app_v1.5.zip inject audio 1 in Clover (config.plist) Good luck What is the codec you choose? I remember GA-EX59-UD5 is 889 so I choose that then on the second prompt I choose 885. After that for the layout ID I only have 5, 7 or 9 to select. I tried with 7 and inject 1, it doesn't work, neither if Inject 7. Link to comment Share on other sites More sharing options...
@ROBASEFR Posted September 26, 2016 Share Posted September 26, 2016 What is the codec you choose? I remember GA-EX59-UD5 is 889 so I choose that then on the second prompt I choose 885. After that for the layout ID I only have 5, 7 or 9 to select. I tried with 7 and inject 1, it doesn't work, neither if Inject 7. Attached is my config.plist. I will be glad if you could check and compare with yours. GA EX58-UD5 has 889A audio codec wich= 885 ! Using the audio_cloverALC-120_v1.0b0.command from Toleda's latest audio_CloverALC-master.zip you get this: (mount your EFI before ! ) the text in blue is what you enter, green is what's been installed .... AgreementThe audio_cloverALC-120 script is for personal use only. Do not distributethe patch, any or all of the files or the resulting patched AppleHDA.kextfor any reason without permission. The audio_cloverALC-120 script isprovided as is and without any kind of warranty.File: audio_cloverALC-120.command_v1.0b0Release ModePassword:"your password"EFI partition is mountedSystem Integrity Protection status: disabled.OK to patchConfirm Realtek ALC885 (y/n): yClover Audio ID Injection (y/n): yUse Audio ID: 1 (y/n): yDownload ALC885 files ...% Total % Received % Xferd Average Speed Time Time Time CurrentDload Upload Total Spent Left Speed100 22419 100 22419 0 0 46771 0 --:--:-- --:--:-- --:--:-- 46803Edit config.plist/Devices/Audio/Inject/1Edit config.plist/SystemParameters/InjectKexts/YESDownload kext patches% Total % Received % Xferd Average Speed Time Time Time CurrentDload Upload Total Spent Left Speed100 1418 100 1418 0 0 3871 0 --:--:-- --:--:-- --:--:-- 3874Download config kext and install ...% Total % Received % Xferd Average Speed Time Time Time CurrentDload Upload Total Spent Left Speed100 3665 100 3665 0 0 9961 0 --:--:-- --:--:-- --:--:-- 9986Install /Library/Extensions/realtekALC.kextInstall System/Library/Extensions/AppleHDA.kext/ALC885 zml filesFix permissions ...Kernel cache...rebuilding //System/Library/PrelinkedKernels/prelinkedkernelkext file:///System/Library/Extensions/Terminus.kext/ is in hash exception list, allowing to loadkext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext Soundflower.kextkext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext NullCPUPowerManagement.kextkext-dev-mode allowing invalid signature -67013 0xFFFFFFFFFFFEFA3B for kext AppleMobileDevice.kextkext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kextKernelCache ID: 9B81F1BEBE23A255CC00BFCC06C59E56symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) kextcache updated critical boot files, requesting launchd rebootInstall finished, restart required.To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...logoutSaving session......copying shared history......saving history...truncating history files......completed.Deleting expired sessions...79 completed. You wil find my config.plist here by ; DSDT.aml (put it in EFI/CLOVER/ACPI/patched) and all my 10.12 kexts. For your specific graphic card get latest Nvidia webdrivers and Webdriversapp. http://www.insanelymac.com/forum/files/file/474-nvidia%C2%AE-webdriver-updaterapp/ http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-09202016/ Nvidia Web Driver - 367.15.10.05f01 Change in my config.plist only for your use : Boot: default boot volume and nv_disable=1( after Nvidia webdrivers install you can check nvda_drv=1 !) CPU: fréquency 2660; QPI:4800 Gui:your language;screen resolution ? and Theme SMBIOS: Your Board Serial Number and Serialnumber Archive.zip Good luck ! edit: some color problems ! 3x yes and 1 kext is installed and zml.... 2 Link to comment Share on other sites More sharing options...
AndreaM Posted September 26, 2016 Share Posted September 26, 2016 Don't worry about motherboard audio ... i've spent a lot of time with no luck Go with a cheap USB audio adapter ... and enjoy your mobo! Link to comment Share on other sites More sharing options...
@ROBASEFR Posted September 26, 2016 Share Posted September 26, 2016 Don't worry about motherboard audio ... i've spent a lot of time with no luck Go with a cheap USB audio adapter ... and enjoy your mobo! Facility solution! Everyone knows that No need to consult this blog for this kind of comment .... Very nice kind of respect for all the developers....! Link to comment Share on other sites More sharing options...
aikidoka25 Posted September 27, 2016 Share Posted September 27, 2016 Facility solution! Everyone knows that No need to consult this blog for this kind of comment .... Very nice kind of respect for all the developers....! I agree. It is like installing another tire when you have a flat tire. So I managed to repair the audio using the toleda audio_cloverALC-120_v1.0b0.command It is not truly vanilla, but at least I don't have to use weird id 0 as before, and the USB mic for Siri seems stable. Merci bcp @ROBASFR UPDATE: It seems the Logitech USB webcam (don't remember the model) microphone is not responding after resuming the system from sleep. I just found out this morning, the speaker is still functioning Need more investigation on this. But I am quite happy with the sound output works 100%, 1 Link to comment Share on other sites More sharing options...
@ROBASEFR Posted September 27, 2016 Share Posted September 27, 2016 UPDATE: It seems the Logitech USB webcam (don't remember the model) microphone is not responding after resuming the system from sleep. I just found out this morning, the speaker is still functioning Need more investigation on this. But I am quite happy with the sound output works 100%, Well I tried mine (logitech quickcam pro 9000 ) wich is on USB 3, and No problem here after sleep ! Link to comment Share on other sites More sharing options...
aikidoka25 Posted September 28, 2016 Share Posted September 28, 2016 Well I tried mine (logitech quickcam pro 9000 ) wich is on USB 3, and No problem here after sleep ! Capture d'écran 2016-09-27 22.18.14.png Capture d'écran 2016-09-27 22.24.22.png Mine is Logitech HD Webcam 270, connected to a USB2 port. Did you try it with Siri after resume from sleep? I just tried and it works this time, so it is intermittent, I need to check some of the USB parameters in Clover which I saw you have it but I don't. When it didn't work, the device is still listed in System Information and System Preferences, only it doesn't responding. I notice also there was a lag on System Preferences that time. Link to comment Share on other sites More sharing options...
max00r Posted December 5, 2016 Share Posted December 5, 2016 I Love this mobo. Yesterday i'm upgrade from Yosemite to El Capitan. Today to Sierra. Simply update from Appstore. Without any combinations. Everything working fine for Me. Only one thing, realtekALC.kext i must patched again by Toleda method. EDIT: Buuuu sleep wont working. Any ideas? 2 Link to comment Share on other sites More sharing options...
@ROBASEFR Posted December 10, 2016 Share Posted December 10, 2016 EDIT: Buuuu sleep wont working. Any ideas? Hello, Did you try my DSDT.aml from my post #4597 ? Can't remember when I had a problem with sleep .... Good luck Link to comment Share on other sites More sharing options...
sl1pkn07 Posted February 24, 2017 Share Posted February 24, 2017 @ROBASEFR can`t unzip the 10.12.zip file :S (in sierra) greetings Link to comment Share on other sites More sharing options...
@ROBASEFR Posted February 24, 2017 Share Posted February 24, 2017 @ROBASEFR can`t unzip the 10.12.zip file :S (in sierra) greetings Do you mean the archive.zip file from post #4629 ? if so , I checked it and detected no problem Link to comment Share on other sites More sharing options...
sl1pkn07 Posted February 24, 2017 Share Posted February 24, 2017 can't extract the file 10,12.zip inside the archive.zip with the default app, but works ok with p7zip BTW, you can explain for what is each kext in the zip? i have the same mobo like you greetings Link to comment Share on other sites More sharing options...
@ROBASEFR Posted February 27, 2017 Share Posted February 27, 2017 BTW, you can explain for what is each kext in the zip? greetings When looking around a bit in this site you could find this info... -RealtekRTL8111.kext- support for the LAN (Ethernet) (RTL8111D) -ApplePCIIDE.kext - IDE –P(ATA) support -FakeSMC.kext (with plugins inside) – for general Hackintosh support ; absolutely mandatory kext and is required for booting the system ! -FakePCIID.kext with ( DummyUSBXHCIPCO.kext and DummyUSBEHCIPCI.kext) - USB support -USBInjextAll.kext- USB support -aDummyHDA.kext – better AudioHDA support -AHCIPortInjector.kext – inject id device for most Sata chips ( support my thirdparty SATA III PCI card) -GenericUSBXHCI.kext (third party USB-3 card support) -RealtekALC.kext – add Audio (ALC 889a -885) support Link to comment Share on other sites More sharing options...
sl1pkn07 Posted February 27, 2017 Share Posted February 27, 2017 thanks! some kext I know it , but others not -aDummyHDA.kext – better AudioHDA support -FakePCIID.kext with ( DummyUSBXHCIPCO.kext and DummyUSBEHCIPCI.kext) - USB support can you explain (a little) what inprove make this? and where found/how install it (if need a special steps)? in other hand. i'm not sure if I can post this here. I have several problem with my graphic card (9800GT). always get "blue screen" and inmediately reboot the machine (-nvda_driver=1 or enable nvidia web option in clover (r4012)) if enable fakenvidia injector, gets a KP in the nvidiaweb driver also add in the properties the efi string I get with this: https://giuliomac.wordpress.com/tag/efistudio/ but not works (or KP if inject is enable or bluescreen/reboot if disable inject) tested also with AGDPfix. no sucess only works with nv_disable=1 using this plist (https://www.dropbox.com/s/m5ftz39ph8y7hpt/config.plist?dl=0) and you DSDT (untouch) the display is a asus PB287Q (4K) and is connected by DVI-> HDMI adapter, because using HDMI->HDMI, in Vesa mode, i have less resolution than DVI-> HDMI (?) i'm out of ideas, only I lack reinstall the system any help? greetings Link to comment Share on other sites More sharing options...
@ROBASEFR Posted February 28, 2017 Share Posted February 28, 2017 thanks! some kext I know it , but others not can you explain (a little) what inprove make this? and where found/how install it (if need a special steps)? No install and no special steps and don't bother they do are harmless ! in other hand. i'm not sure if I can post this here. I have several problem with my graphic card (9800GT). always get "blue screen" and inmediately reboot the machine (-nvda_driver=1 or enable nvidia web option in clover (r4012)) if enable fakenvidia injector, gets a KP in the nvidiaweb driver also add in the properties the efi string I get with this: https://giuliomac.wordpress.com/tag/efistudio/ but not works (or KP if inject is enable or bluescreen/reboot if disable inject) tested also with AGDPfix. no sucess only works with nv_disable=1 using this plist (https://www.dropbox.com/s/m5ftz39ph8y7hpt/config.plist?dl=0) and you DSDT (untouch) the display is a asus PB287Q (4K) and is connected by DVI-> HDMI adapter, because using HDMI->HDMI, in Vesa mode, i have less resolution than DVI-> HDMI (?) i'm out of ideas, only I lack reinstall the system any help? greetings First I think you don't have to use the latest Clover version ! (latest is not the best for everyone !...) Beside OS improvement and compatiblety, Developers don't improve Clover for our MOBOS ! Install this one: https://sourceforge.net/projects/cloverefiboot/files/Installer/Clover_v2.3k_r3974.zip/download About kexts in EFI/CLOVER/KEXTS/10.12 they are installed there and not elsewhere ! They get injected because you say so in clover.plist ! About your NVidia 9800GT it should work without webdrivers ! So just inject Nvida in Clover and get rid of your webdrivers ! Use my config.plist and my DSDT.aml and it should work ( for me it does since 2009). Use first only the files from one person with a rig wich is OK , Then you can explore for your self .. Sorry to say so, but your 4K screen is not very adapted to your graphic card.... Try first VGA and then go step by step to fix things thurder on... Nvidia 9800GT specs: Maximum Digital Resolution 2560x1600 Maximum VGA Resolution 2048x1536 Good luck ! Link to comment Share on other sites More sharing options...
sl1pkn07 Posted February 28, 2017 Share Posted February 28, 2017 yes, i know my 4k is not suitable for the 9800GT, but is because the display used by other machine (the display is shared between 2 machines, one my main machine and other is the hackintosh machine).I would be happy if the output is 1920x1080, not 1280x1024 (or 1024x756 if use HDMI) like now ok, then i'm going tried with older clover and without webdrivers (but i'm completely sure the webdrivers working like charm with my old (10.10.2) Yosemite installation (before update to sierra) I don't touch the hackintoch rig since 2 yars ago you still no explain what inprovements make these 3kext greetings EDIT: nope - Install clover r3974 (full reinstall) - Remove Nvidia webdrivers and unset in clover nv_driver=1 or NvidiaWeb - Inject NVIDIA in the grapics option - boot arguments: -v darkwake=0 - DVI adapter to HDMI (my display dont't have DVI input) now gets 'No signal' (blue screen) display , but the restart after this, and the KP is gone. now need hard reboot by panic button only works again if set nv_disable=1 Link to comment Share on other sites More sharing options...
jrhende Posted March 2, 2017 Share Posted March 2, 2017 Thanks @ROBASEFR Using 10.12.3 and all works except audio which I don't care about. Sleep/wake is perfect and IDE port even works. 1 Link to comment Share on other sites More sharing options...
@ROBASEFR Posted March 2, 2017 Share Posted March 2, 2017 yes, i know my 4k is not suitable for the 9800GT, but is because the display used by other machine (the display is shared between 2 machines, one my main machine and other is the hackintosh machine).I would be happy if the output is 1920x1080, not 1280x1024 (or 1024x756 if use HDMI) like now ok, then i'm going tried with older clover and without webdrivers (but i'm completely sure the webdrivers working like charm with my old (10.10.2) Yosemite installation (before update to sierra) I don't touch the hackintoch rig since 2 yars ago you still no explain what inprovements make these 3kext greetings EDIT: nope - Install clover r3974 (full reinstall) - Remove Nvidia webdrivers and unset in clover nv_driver=1 or NvidiaWeb - Inject NVIDIA in the grapics option - boot arguments: -v darkwake=0 - DVI adapter to HDMI (my display dont't have DVI input) now gets 'No signal' (blue screen) display , but the restart after this, and the KP is gone. now need hard reboot by panic button only works again if set nv_disable=1 Concerning your Nvidia 9800GT: Like me you can search on several sites and they all confirm that it should work without webdrivers (some times even OOB ! ) Cleaning up caches and rebuiding kernelcache, Kexts, NVRAM can help sometimes in desperate situations .... Concerning the FakePCIID.kext and associated DummyUSBXHCIPCO.kext and DummyUSBEHCIPCI.kext : from OSX > 10.11 "using the dummy kexts route USB2 devices on XHC to EHCI" for older MOBOS (without UEFI) I changed my DSDT also in the same intention and perhaps it is double employed. But it doesn't harm... More info on this : https://github.com/RehabMan/OS-X-Fake-PCI-ID Nevertheless, I don't have USB problems with this config any more ! Link to comment Share on other sites More sharing options...
sl1pkn07 Posted March 2, 2017 Share Posted March 2, 2017 http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=165608 http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=165609 https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads/RehabMan-FakePCIID-2017-0109.zip right? or is a special edition(or need edit by hand) Link to comment Share on other sites More sharing options...
@ROBASEFR Posted March 2, 2017 Share Posted March 2, 2017 http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=165608 http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=165609 https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads/RehabMan-FakePCIID-2017-0109.zip right? or is a special edition(or need edit by hand) Yes, the same as in my archive.zip (/CLOVER/KEXTS/10.12) Link to comment Share on other sites More sharing options...
sl1pkn07 Posted March 2, 2017 Share Posted March 2, 2017 ok. tested with EVGA GTX770 2GB via HDMI (force 1080p30 HiDPI with switchresx, because native 4K gets dammsmall icons/UI, my display, ASUS PB287Q, is a NON-HiDPI panel (157x161dpi) the problem is fixed. no NVIDIA injection, no efistring in properties, no webdrivers, all OOTB seems the 9800gt is now unsupported in sierra change NVDASTARTUP.kext by El Capitan version don't work Greetings Link to comment Share on other sites More sharing options...
@ROBASEFR Posted March 2, 2017 Share Posted March 2, 2017 ok. tested with EVGA GTX770 2GB via HDMI (force 1080p30 HiDPI with switchresx, because native 4K gets dammsmall icons/UI, my display, ASUS PB287Q, is a NON-HiDPI panel (157x161dpi) the problem is fixed. no NVIDIA injection, no efistring in properties, no webdrivers, all OOTB seems the 9800gt is now unsupported in sierra change NVDASTARTUP.kext by El Capitan version don't work Greetings Yes, Your graphic card problems intrigued me so I did some digging and it apears that there is a problem with this card since OSX SIERRA ... I found this solution nevertheless: "I've just overwritten /System/Library/Extensions/NVDAStartup.kext in a fresh Sierra installation with NVDAStartup.kext from El Capitan, then rebuilt the kernel cache as described in kextcache man page (sudo touch /System/Library/Extensions; kextcache -update-volume /Volumes/Sierra)." You'll find the NVDAStartup.kext from El Capitan here by to use NVDAStartup.kext.zip Seems you tried it already .. Success ! Link to comment Share on other sites More sharing options...
sl1pkn07 Posted March 3, 2017 Share Posted March 3, 2017 if you see the link posted in the message, is the same solution I posted. and no work for me Link to comment Share on other sites More sharing options...
max00r Posted April 2, 2017 Share Posted April 2, 2017 (edited) Hello, after security update to Sierra 10.12.4 (16E195) broke my network connections. System not see any ethernet adapters. Anybody knows something about it?System seeng card, but kext not working. Realtek 8168/8101E Gigabit Ethernet: Name: ethernet Type: Ethernet Driver Installed: No MSI: No Bus: PCI Slot: Ethernet Vendor ID: 0x10ec Device ID: 0x8168 Subsystem Vendor ID: 0x1458 Subsystem ID: 0xe000 Revision ID: 0x0003 Link Width: x1 Link Speed: 2.5 GT/s This is strange, but i fix it manually install realtek kext to SLE. Edited April 2, 2017 by max00r Link to comment Share on other sites More sharing options...
MaLd0n Posted April 3, 2017 Share Posted April 3, 2017 u try a Mieze' s version? http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/ Clover/kexts/10.12 1 Link to comment Share on other sites More sharing options...
Recommended Posts