Wupgup Posted March 21, 2010 Share Posted March 21, 2010 You could try to use the chameleon rc4 installer on a mac. It has a gui and you can click on the right drive where it should be installed. Then you can boot into the osx installer from your usb. After the installation is done you can use the chameleon rc3 provided by macpip to install chamaleon onto the hdd in your 1101 . Link to comment Share on other sites More sharing options...
artix123 Posted March 24, 2010 Share Posted March 24, 2010 I'm almost there.. used beermacht's instructions. Up to the last instruction, when I install the 2 kexts (GMA500 and voodoo), I get kp upon restart. WTF? Link to comment Share on other sites More sharing options...
xyu_v_palto Posted March 25, 2010 Share Posted March 25, 2010 artix123, try this guide http://www.corsino.com/blog/?p=73 t's very simple. If you have internal hdd you can install sl to it from other mac or hackintosh, and then boot it from netbook. I used this way, everything working except lan,wlan and sound. And what's about sound? Any solutions? I always have this: Sound assertion “0 != setupHostInterrupt ()” failed in “/SourceCache/AppleHDA/AppleHDA-179.1.4/AppleHDAController/AppleHDAController.cpp” at line 312 goto Exit and Sound assertion “!fProvider->open ( this )” failed in “/SourceCache/AppleHDA/AppleHDA-179.1.4/AppleHDAController/AppleHDAController.cpp” at line 234 goto Exit And no output sound devices. May be some corrections do dsdt.aml? I tried to correct it myself, but still the same errors Link to comment Share on other sites More sharing options...
artix123 Posted March 28, 2010 Share Posted March 28, 2010 hey thanks so much for your reply. I am actually on a VAIO P, haha, I managed to get everything except resolution and audio. That's when KP comes in when I install the 2 kexts. There was this ONCE when I was doing a single mac boot (without Windows), somehow I managed to get into the installation screen with the correct resolution, and that was the only time everything fully worked. Sadly I am trying to create a dual boot now so the working copy is gone I'm rather busy these few weeks, so I think I'll put it aside and use my Windows 7 first, haha. Link to comment Share on other sites More sharing options...
ktsak Posted April 2, 2010 Share Posted April 2, 2010 Thank you so much, i'll buy him another netbook. Do you know which can run osx well? Dell mini 10v (aka 1011). It works OTB !!!!!!!!!! Take a look here http://www.mydellmini.com/forum/dell-mini-...rd-netbook.html Link to comment Share on other sites More sharing options...
hustenbold Posted May 18, 2010 Share Posted May 18, 2010 To those who got OSX86 working on the 1101HA: Does Standby work correctly? Link to comment Share on other sites More sharing options...
xyu_v_palto Posted May 20, 2010 Share Posted May 20, 2010 For me not. After installing OsX to 1101ha i understood, that (IMHO) OsX on it is just for playing a minute, it's working too slow, much more slow then XP. Link to comment Share on other sites More sharing options...
hustenbold Posted May 25, 2010 Share Posted May 25, 2010 After installing OsX to 1101ha i understood, that (IMHO) OsX on it is just for playing a minute, it's working too slow, much more slow then XP. Is it really so slow? Are other netbooks faster using OSX86? Link to comment Share on other sites More sharing options...
macpip Posted May 26, 2010 Share Posted May 26, 2010 Is it really so slow? Are other netbooks faster using OSX86? The Asus 1201N runs a lot faster, mainly due to the SATA chipset being recognized, and full accelerated video support. However it still lacks built-in Wifi support. Link to comment Share on other sites More sharing options...
telephoner Posted August 21, 2010 Share Posted August 21, 2010 Guys when I try the post #35 tutorial i get a : You need to restart your mac error screen :S Can anyone help me? Link to comment Share on other sites More sharing options...
jbbrs Posted September 17, 2010 Share Posted September 17, 2010 Hi, I've followed this guide and the linked blog, and I'm stuck after install, as the keyboard and the touchpad never get recognized. I've tried a few kexts, but the final result is always the same. Also, I have to pass "cpus=1" as a boot parameter, or a usb mouse isn't recognized, and so I can't even install. Any suggestions on what should I try now, which kext should work on this? Thanks! Link to comment Share on other sites More sharing options...
tobio89 Posted November 5, 2010 Share Posted November 5, 2010 Hi Guys! I have an EEE PC 1101HA, too and i'd like to install Mac OS. Since the tutorials I've found are all a little outdated, I'd like to know, whether it is possible now to install MAC OS onto the 1101 with everything working and in an adequate speed. And my next question is what i would need to do that! Hope you can help me! Link to comment Share on other sites More sharing options...
vince86 Posted December 8, 2010 Share Posted December 8, 2010 Hi, I need a working AppleIntelPIIXATA.kext i have a 1201ha (same hardware of the 1101ha) I tried many versions, but dosent work.. Link to comment Share on other sites More sharing options...
jbbrs Posted December 17, 2010 Share Posted December 17, 2010 Hi, I need a working AppleIntelPIIXATA.kext i have a 1201ha (same hardware of the 1101ha) I tried many versions, but dosent work.. Vince, you need to remove the existing one under /System/Library/Extensions/AppleIntelIOATA.kext/Content/PlugIns, and put the most recent one from the VaioP threads there. My problem with the keyboard was DSDT - I had to provide mine instead of using the one from this thread. Now I am still stuck in some stuff - wifi only works in 802.11G, not on 802.11n (in 10.6.5, as in 10.6.4 it worked on both), ethernet doesn't work, sleep doesn't work. I also tried connecting a Huawei 3G key (E1692) and even if it is detected and installed, doesn't work. Looks like some problem still with the usb drivers. Link to comment Share on other sites More sharing options...
Recommended Posts