gazfocus Posted August 20, 2009 Share Posted August 20, 2009 Super remember to post you project Quick question so I can buy the tools I'll need. What is the thickness of the metal on the back of the PowerMac case that I'll need to cut? Also what's the thickness of the Lian Li motherboard tray? Rough guesses would be ok. Yeah, I'll definately post the project Thanks Link to comment Share on other sites More sharing options...
nerdalertdk Posted August 20, 2009 Author Share Posted August 20, 2009 Quick question so I can buy the tools I'll need. What is the thickness of the metal on the back of the PowerMac case that I'll need to cut? Also what's the thickness of the Lian Li motherboard tray? Rough guesses would be ok. Yeah, I'll definitely post the project Thanks backplate is 0.8mm Alu and lian li tray is 0.8-1mm a angel grinder goes through it like butter edit the case it self is 1-1.2mm alu, but used the same disk on the angel grinder: 1mm metal disk Link to comment Share on other sites More sharing options...
gazfocus Posted August 20, 2009 Share Posted August 20, 2009 backplate is 0.8mm Alu and lian li tray is 0.8-1mm a angel grinder goes through it like butter edit the case it self is 1-1.2mm alu, but used the same disk on the angel grinder: 1mm metal disk Thanks. I'm looking at buying these: Gilbows and this Close Quarter Hacksaw Do you think these would do the job? Link to comment Share on other sites More sharing options...
nerdalertdk Posted August 20, 2009 Author Share Posted August 20, 2009 Thanks. I'm looking at buying these: Gilbows and this Close Quarter Hacksaw Do you think these would do the job? they can do the job but gonna take some time and the cutter is going to leave marks i used something like this http://www.2handequipment.com/bilder/100.jpg Link to comment Share on other sites More sharing options...
gazfocus Posted August 20, 2009 Share Posted August 20, 2009 they can do the job but gonna take some time and the cutter is going to leave marks i used something like this http://www.2handequipment.com/bilder/100.jpg I had looked at those but not really sure I could afford it as I will only be using it for this project. May see if I can borrow one though. Link to comment Share on other sites More sharing options...
Renard45 Posted September 13, 2009 Share Posted September 13, 2009 Hi nerdalertdk first sorry for my poor english i have a question my G5 case will arrive soon and i want to know if this motherboard tray is ok for the back of the case please: http://www.performance-pcs.com/catalog/ind...oducts_id=21886 thanks in advance Link to comment Share on other sites More sharing options...
nerdalertdk Posted September 13, 2009 Author Share Posted September 13, 2009 Hi nerdalertdk first sorry for my poor english i have a question my G5 case will arrive soon and i want to know if this motherboard tray is ok for the back of the case please: http://www.performance-pcs.com/catalog/ind...oducts_id=21886 thanks in advance Some ask me the same thing in another tread, but i think the backplate you link to is to wide. it will end up covering the case open/close handle. and then you will have to cut where the fan would sit. My backplate is around 15cm in width Link to comment Share on other sites More sharing options...
Renard45 Posted September 13, 2009 Share Posted September 13, 2009 ok thanks what about this? http://www.performance-pcs.com/catalog/ind...roducts_id=3387 Link to comment Share on other sites More sharing options...
nerdalertdk Posted September 13, 2009 Author Share Posted September 13, 2009 ok thanks what about this? http://www.performance-pcs.com/catalog/ind...roducts_id=3387 That one is 17.7 wide. Don't think it's gonna work Link to comment Share on other sites More sharing options...
Renard45 Posted September 13, 2009 Share Posted September 13, 2009 your motherboard tray is the best? Link to comment Share on other sites More sharing options...
nerdalertdk Posted September 13, 2009 Author Share Posted September 13, 2009 your motherboard tray is the best? That's my opinion, its only 15cm width the others are widther, and I think they will cover the open/close handle, but wait till you get your case, then measure and compare the thinks. Link to comment Share on other sites More sharing options...
Renard45 Posted September 14, 2009 Share Posted September 14, 2009 ok thanks a lot Link to comment Share on other sites More sharing options...
wises Posted October 3, 2009 Share Posted October 3, 2009 what kind of PSU are you using? Link to comment Share on other sites More sharing options...
Scottapotamas Posted October 3, 2009 Share Posted October 3, 2009 The psu i use is a "NorthQ - NQ-4775-650-FLEX, 650 Watt" Dimensions:150*86*160mm(W*H*L)Its a real tight fit so there is no need to tape, screw the psu in place, its held by the top of the case and the plate inside the case Read earlier in the topic Link to comment Share on other sites More sharing options...
ruslan120 Posted October 10, 2009 Share Posted October 10, 2009 Very nice mod! Just out of curiosity, how did you mount the motherboard to the case itself? Link to comment Share on other sites More sharing options...
nerdalertdk Posted October 10, 2009 Author Share Posted October 10, 2009 Very nice mod! Just out of curiosity, how did you mount the motherboard to the case itself? I used the lian li tray, then screwed it on the back of the case with 6 screws Link to comment Share on other sites More sharing options...
nerdalertdk Posted January 5, 2010 Author Share Posted January 5, 2010 Extra folder updatede, now all things work 100% with 10.6.2 64bit, see first post Link to comment Share on other sites More sharing options...
nerdalertdk Posted January 22, 2010 Author Share Posted January 22, 2010 Just got the front panel work 100% Before: After: USB,Firewire, Sound, HD LED(green) and power LED works + is working on gette Infrared in front Link to comment Share on other sites More sharing options...
h3lpmedic Posted January 27, 2010 Share Posted January 27, 2010 Just got the front panel work 100% Before: After: USB,Firewire, Sound, HD LED(green) and power LED works + is working on gette Infrared in front Hi I've been a long time lerker on this forum, and now have all the components to attempt a similar task as you. From your most recent post, I was wondering if you were still using your pwr ground from the mbo as described in an earlier post by you. Great work so far, and thanks in advance. Link to comment Share on other sites More sharing options...
nerdalertdk Posted January 27, 2010 Author Share Posted January 27, 2010 Hi, no not in my remake of my front panel but to make it work Ground FireWire must be used and plug in to the montherboard In my first atempt I used pwb,led ground Link to comment Share on other sites More sharing options...
h3lpmedic Posted January 28, 2010 Share Posted January 28, 2010 Hi, no not in my remake of my front panel but to make it work Ground FireWire must be used and plug in to the montherboard In my first atempt I used pwb,led ground Thanks! Front panel is fully functional now. Link to comment Share on other sites More sharing options...
nerdalertdk Posted January 28, 2010 Author Share Posted January 28, 2010 No Problems but remember to post you project always fun to see how other people made there mod Link to comment Share on other sites More sharing options...
h3lpmedic Posted January 29, 2010 Share Posted January 29, 2010 No Problems but remember to post you project always fun to see how other people made there mod I've been trying to post my progress, but for some reason I cant make a new topic... Perhaps admin can help me with this... Link to comment Share on other sites More sharing options...
onosan Posted February 17, 2010 Share Posted February 17, 2010 You need to 'earn your wings' by answering five times before you are alloved to post new topics I've been trying to post my progress, but for some reason I cant make a new topic... Perhaps admin can help me with this... Link to comment Share on other sites More sharing options...
Recommended Posts