Snow Leopard on VAIO P(VGN-P90HS) working!

[mickeyboy]

Yeah, my 1101HA got same problem, need native 1366x768 really bad.

please help.

[ryuu123]

@thangbinh

@mickeyboy

 

try edit /Extra/com.apple.Boot.plist and reboot.

 

--

"Graphics Mode"=1600x768x32

 

to

 

"Graphics Mode"=1366x768x32

--

 

Still no luck, try 915resolution mod as GMA4100 users do.

 

 

I was make my own dsdt.aml and it work perfectly in Asus 1101HA, sound, bluetooth, wifi(replace one),time machine, Battery show percent but still said need replace. but native resolution 1366x768.

hope anyone can help, need any info pls tell me.

Thanks.

[thangbinh]

Thank for your reply but i was try edit boot.plist but still not work.

trying 915 resolution mod.

[ryuu123]

Thank for your reply but i was try edit boot.plist but still not work.

trying 915 resolution mod.

 

So hard

 

it's not X4100 but X4500.

This topic will help you.

 

http://www.insanelymac.com/forum/index.php...29744&st=37

[beermacht]

ok, i've updated to 10.6.2 - the most stuff works

don't know if gps is working - is there a good navigation software for osx on the market ?

 

is there any way ton activate the "Press-to-click" feature ?

i tried the kext from post 197 - but it won't work

[ryuu123]

is there any way ton activate the "Press-to-click" feature ?

i tried the kext from post 197 - but it won't work

 

really?

 

try this

# this should work with my archive's VoodooPS2

VoodooPS2Mouse.zip

[beermacht]

sorry - still not working

i've reinstalled the voodoo stuff from your files - still nothing

[ryuu123]

sorry - still not working

i've reinstalled the voodoo stuff from your files - still nothing

 

How did you install?

 

replace /Extra/Extensions1/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Mouse.kext

and re-make /Extra/Extensions.mkext is right way.

[beermacht]

How did you install?

 

replace /Extra/Extensions1/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Mouse.kext

and re-make /Extra/Extensions.mkext is right way.

 

that was it - i'm too old for that

thank you very much fro your help

is there any gps/navigation/routing software with european maps ??

[Drakulix]

Hey Guys, nice work! Could you pls help me??

I want to install SL on a MSI Wind U115.

It has a Intel Poulsbo Chipset. So I used your PIIXATA.kext, but I got:

 

ATA Disk: Checksum Cookie not valid.
IntelPIIXATA: 80-conductor-cable not detected on primary IDE channel.

Still waiting for root device
Still waiting for root device
Still waiting for root device
...

 

It has a 8GB SSD Disk and a 160GB IDE Disk.

There is no option in the bios for AHCI oder IDE Mode...even with a BIOS update...

 

So I think it's a chipset problem, any idea??

 

Thanks

Drakulix

[ryuu123]

HI,

 

ATA Disk: Checksum Cookie not valid.
IntelPIIXATA: 80-conductor-cable not detected on primary IDE channel.

 

These messages are normal.

Did you try specify "rd= " option at boot?

 

 

Hey Guys, nice work! Could you pls help me??

I want to install SL on a MSI Wind U115.

It has a Intel Poulsbo Chipset. So I used your PIIXATA.kext, but I got:

 

ATA Disk: Checksum Cookie not valid.
IntelPIIXATA: 80-conductor-cable not detected on primary IDE channel.

Still waiting for root device
Still waiting for root device
Still waiting for root device
...

 

It has a 8GB SSD Disk and a 160GB IDE Disk.

There is no option in the bios for AHCI oder IDE Mode...even with a BIOS update...

 

So I think it's a chipset problem, any idea??

 

Thanks

Drakulix

[Drakulix]

HI,

 

These messages are normal.

Did you try specify "rd= " option at boot?

 

I tried already a boot-uuid flag and platformUUID.kext.

Do you think rd= is better?

[ryuu123]

I tryed already a boot-uuid flag and platformUUID.kext.

Do you think rd= is better?

 

Yes, sometimes better.

 

BTW, USB or HDD which you try?

[Drakulix]

Yes, sometimes better.

 

BTW, USB or HDD which you try?

 

 

First tried to launch an USB-Stick (with Retail DVD, EFI Partition kexts).

I got same errors and an USBF error (could not enumerate device at port @2..).

So I used a ubuntu linux to read out the uuid of the HDD and copy the Stick (with new UUID) to the IDE HDD (160GB). (with "dd if=.. of=..").

The UUID is definitive correct...

[thangbinh]

Wow, finally can make Asus 1101ha work at native resolution.(1366x768)

All work perfect except the battery status , it always said "Condition : Replace now" but my battery have about 8-9 hours left.

 

Anyone can help with battery problem? really thanks.

[mickeyboy]

Asus 1101HA - netbook

Everything working now .

Very happy.....

Thank ryuu123 and everyone else.

[MagForAll]

Hallo Guys... I have my vaio P688E and trying to install snow leopard there.... but I get kernel panic with unsupported CPU....

any hints ?

[ryuu123]

@Drakulix

Perhaps USB trouble is caused by VAIOPEnabler.

You should replace it with GMA500Enabler.

 

Internal disk,your way seems right. but something is wrong. By the ATA messages, devices are recognize collectly. reconfirm your disk partition status.

 

@thangbinh

@mickeyboy

You got it!

With vaio p, we have no such battery problem.

but Hints are in VoodooBattery or DSDT.

 

@MagForAll

I've seen "unsupported CPU" 2 times.

To avoid …

1. delete AppleIntelCPUPowermanagement.

2. patch kernel.(10.6.2)

[Drakulix]

I'm using GMA500Enabler already...

My disk partitions seem to be correct.

My Status is:

 

SSD: 8GB

MBR

Ubuntu 9.10

and Swap Partition

 

HDD: 160GB

GUID

EFI

Snow Leopard

 

I don't know what's the problem...

[MagForAll]

Hallo guys,

I still have problem even run instalator...

check errors messages:

 

Any hints please ?

[beermacht]

Hallo Guys... I have my vaio P688E and trying to install snow leopard there.... but I get kernel panic with unsupported CPU....

any hints ?

 

what bootfiles did you use ?

i'm not the mac freak and i'm not able to read something special from your picture - but the main difference from your p688e to my p11z should only be the ssd - am i right ?

 

i had my problems with the boot files - but that was my fault (no mac to prepare the usb pendrive, never really did anything like that on a mac (my last mac was a LC2)

but that pendrive i've made with different files from different sources worked well - my p11 has now 10.6.2 and W7 on it, i use chameleon as bootmanager and everything works fine (with the common limitations)

the setup was complete done with pendrives (W7, OSX, Gparted and one for the Bootfiles)

did you use any commands while starting the setup ??

[marcocc]

I had lot of problems trying to create my usb external key ready for my sony vaio p

Can somebody prepare one for me? I will pay for it(Vaio P european version with WWAN working using the new drivers)

 

many many thanks

 

please reply to me at mcc@speakage.com

[beermacht]

hmm - cash ???

 

no thanks

 

if anyone deserves money - than ryuu123!!

i made an dmg of my bootstick - all you need is transmac and a 512mb pendrive

use it as mentioned in this an the other thread (10.6)

read the stuff twice (minimum) - you will get to a few points where you can get stuck

but there's (almost) always a way out.

i made the initial install "pure" on an empty hdd - at the moment i have 10.6.2 and windows 7 on my p11z

(i installed windows is only to use the gps)

 

image deleted - fixed image below

 

edit: i've seen thats something wrong with the image - it wont boot - so wait a little until i fixed it

Edited December 4, 2009 by beermacht

[MagForAll]

@beermacht

I prepared USB stick with 10.6.0 with Chameleon 2 RC3 and copy on that vaiop-alpha-1 files...

[beermacht]

maybe you should try the image i posted above

worked for me without any problem - there is data garbage in it - i know that, but it's made from a different image and i changed some stuff - it works - and thats the important part - but - you need a 512mb stick ( even if it's only ~14mb as a dmg)