pjcau Posted November 23, 2006 Share Posted November 23, 2006 How?? i can't use the xcode. Link to comment Share on other sites More sharing options...
pjcau Posted November 23, 2006 Share Posted November 23, 2006 help me!!! Link to comment Share on other sites More sharing options...
dogbert Posted November 23, 2006 Share Posted November 23, 2006 help me!!! help yourself there's a binary for 10.4.8 on my site which is reported to work. Link to comment Share on other sites More sharing options...
pjcau Posted November 23, 2006 Share Posted November 23, 2006 what is your site ? hi Link to comment Share on other sites More sharing options...
scoutme Posted November 24, 2006 Share Posted November 24, 2006 You're not alone. I also have problem getting any sound of my cmi9739a-chip. The chip is detected succesfully and the appleac97driver-module loads without problems but there is no sound playback Did you notice you can attach a headset to the lineout (or headphones out) and hear sounds? It sounds like the system recognize the card, but has some incomplete routing. I WANT MY SPEAKERS!! Link to comment Share on other sites More sharing options...
MacRetail Posted December 15, 2006 Share Posted December 15, 2006 what is your site ?hi He's site is http://scifi.pages.at/ffm-2/ Link to comment Share on other sites More sharing options...
Boopop Posted January 13, 2007 Share Posted January 13, 2007 (edited) I've tried this driver - All i get is a kernel panic, or no sound in safe mode. I've just bought a PC Line 5.1 sound card with the correct CMedia chip on it. Any ideas? EDIT: Woops, I installed the driver for a different kernel 0.o. All sorted now, I just installed the right one and got rid of appleac97 as that was what was causing the kernel panic. Edited January 14, 2007 by Boopop Link to comment Share on other sites More sharing options...
kader Posted January 20, 2007 Share Posted January 20, 2007 I have install this driver in my 10,4,8 system I have an install succefully : Installing CMI8738 kernel extension... kextload: extension /System/Library/Extensions/IOAudioFamily.kext is already loaded kextload: /System/Library/Extensions/CMI8738PCIAudioDriver.kext loaded successfully Installation finished - enjoy! dogbert <dogber1@gmail.com> But I dont have sound Link to comment Share on other sites More sharing options...
kader Posted January 22, 2007 Share Posted January 22, 2007 up ? Link to comment Share on other sites More sharing options...
mitsuzero Posted January 24, 2007 Share Posted January 24, 2007 (edited) thanks for the driver .......works perfectly ..... jijiji system: Nforce 4 athlon64 3500 socket AM2 512 mb ram video onboard geForce 6100 Edited January 25, 2007 by mitsuzero Link to comment Share on other sites More sharing options...
mitsuzero Posted January 25, 2007 Share Posted January 25, 2007 i dont check but i dont use the microphone .... i need it ,,,,,, for talk with my friends in a teamspeak server ...if u have a idea ..to fix that ....i thank to u to much..... :huh: Link to comment Share on other sites More sharing options...
micro7 Posted January 25, 2007 Share Posted January 25, 2007 Thank you for the driver! Good work! After gettin "superior"-problem already mentioned above I tried CMI8738.zip and got it work. My System: AMD 3000+ at MSI k8m800-v (also with OnBoard AC97 already running). My Soundcard is a Nightingale Pro6. Greets, µ7 Link to comment Share on other sites More sharing options...
kader Posted January 28, 2007 Share Posted January 28, 2007 I have install this driver in my 10,4,8 system I have an install succefully : Installing CMI8738 kernel extension... kextload: extension /System/Library/Extensions/IOAudioFamily.kext is already loaded kextload: /System/Library/Extensions/CMI8738PCIAudioDriver.kext loaded successfully Installation finished - enjoy! dogbert <dogber1@gmail.com> But I dont have sound anyone have a reponse for me ? Link to comment Share on other sites More sharing options...
TheDC70 Posted January 31, 2007 Share Posted January 31, 2007 C-Media USB Audio...Help me get it working! I need a little help getting sound on my Intel Mac. Anyone wanna help me take a shoot? The situation is as follows. I have SoundBlaster X-Fi card in my system, but the mac does not detect that. I don't think it detects any of my PCI devices, but this is another story…or maybe a partial solution. From what I've found, SoundBlaster X-Fi is not supported yet in OS X 10.4.X (maybe 10.5?). Onto the point. In order to get sound out of my system, I checked the HCL on http://wiki.osx86project.org/ and found "C-Media USB Audio (no additional drivers required)" [under USB Devices]. Well, looked like a dream come true and at only $26 too! Long story short…the no drivers situation is not the case. The USB device I have in my possession specifications can be found here http://www.siig.com/product.asp?pid=1048 notice it uses C-Media CMI102 chipset, So I'm still in the ballpark. Moving along, I came across this post and attempted to install Dogbert's driver. Didn't have any success either. I know its written in mind for PCI, but you never know. The similar error to everyone else in the form comes back at me. Tried all versions. The following is what comes back to me thedc70s-computer:~ TheDC70$ /Users/TheDC70/Desktop/install.sh Installing CMI8738 kernel extension... cp: CMI8738PCIAudioDriver.kext: No such file or directory find: /System/Library/Extensions/CMI8738PCIAudioDriver.kext: No such file or directory find: /System/Library/Extensions/CMI8738PCIAudioDriver.kext: No such file or directory chown: /System/Library/Extensions/CMI8738PCIAudioDriver.kext: No such file or directory kextload: /System/Library/Extensions/CMI8738PCIAudioDriver.kext: no such bundle file exists can't add kernel extension /System/Library/Extensions/CMI8738PCIAudioDriver.kext (file access/permissions) (run kextload on this kext with -t for diagnostic output) Installation finished - enjoy! dogbert <dogber1@gmail.com> thedc70s-computer:~ TheDC70$ The .kext in that directory. I've moved it there myself, after authenticating it, and evern left the .kext in the same directory as the install.sh file for excecution. Also, in the system profiler, It is detected in the USB section USB Audio: Version: 0.10 Bus Power (mA): 500 Speed: Up to 12 Mb/sec Manufacturer: C-Media INC. Product ID: 0x0001 Vendor ID: 0x0d8c No option however in the sound section of the control panel. So, Can anyone help me or point me in the right direction? Thanks in Advance -TheDC70 Image Used: MAC OS X 10.4.7 ~JAS Link to comment Share on other sites More sharing options...
kader Posted February 3, 2007 Share Posted February 3, 2007 anyone have a reponse for me ? UP please Link to comment Share on other sites More sharing options...
blagec Posted April 1, 2007 Share Posted April 1, 2007 I have compiled dogbert's CMI8738PCIAudioDriver.kext from source with XCode 2.4.1, and it works. I briefly looked into the source, and it looks safe and open source to me. GENERIC CMI8738 DRIVER ---- ONLY FOR OSX86 Tiger 10.4.9 !!! * For other versions compile from source * INSTALLATION: 0. login as root 1. Unpack CMI8738PCIAudioDriver.kext to /tmp/ for example 2. Do cd /System/Library/Extensions/ cp -r /tmp/CMI8738PCIAudioDriver.kext . chmod -R 755 CMI8738PCIAudioDriver.kext chown -R root:wheel CMI8738PCIAudioDriver.kext 3. Reboot -OR- try to load manually with: kextload CMI8738PCIAudioDriver.kext (Card info should be printed) Driver provided here is for educational purposes only, without any warranty. Please support Apple by bying real Mac! CMI8738PCIAudio_OSX86_10.4.9.zip Link to comment Share on other sites More sharing options...
XsaGti Posted April 2, 2007 Share Posted April 2, 2007 Hi!! With this driver I can solve de Input? All function? Input, Output, SPDIF?? Tanhks for your time Link to comment Share on other sites More sharing options...
blagec Posted April 2, 2007 Share Posted April 2, 2007 Hi!! With this driver I can solve de Input? All function? Input, Output, SPDIF?? Tanhks for your time Short answer is: probably no Output 100% works Input is shown in Sound Preferences but might not work SPDIF is not supported. Source is included - so somebody skilled might fix it in the future... I'm satisfied with output Regards Link to comment Share on other sites More sharing options...
Superhai Posted April 2, 2007 Share Posted April 2, 2007 SPDIF out is working (at least on my card) Link to comment Share on other sites More sharing options...
URBANsUNITED Posted April 3, 2007 Share Posted April 3, 2007 Does is support 5.1 Sound now? URBANsUNITED Link to comment Share on other sites More sharing options...
fazekaim Posted May 10, 2007 Share Posted May 10, 2007 Does anybody use this sound card under 10.4.8? i'm looking for a cheap and full working card for my brother's computer. hi has an intergrated sound blaster so it should be important to buy a working card. the system installed onto the computer is 10.4.8. Link to comment Share on other sites More sharing options...
Cyberdog ! Posted May 31, 2007 Share Posted May 31, 2007 Trust 5200 with digital output works Test : only digital output But no 5.1 channels Link to comment Share on other sites More sharing options...
yellow83 Posted June 16, 2007 Share Posted June 16, 2007 CMI-8738 integrated in Asus P4B533: output work only on green jack. Input is shown ok in preferences but mic dosn't work in any jacks... can anybody help me? Link to comment Share on other sites More sharing options...
goofy Posted August 20, 2007 Share Posted August 20, 2007 What about 10.4.10 ? Link to comment Share on other sites More sharing options...
Kali Posted August 27, 2007 Share Posted August 27, 2007 Terratec Aureon 7.1 PCI (8768+) spdif (stereo) & out work mic not work osx 10.4.9 8.9.1 Link to comment Share on other sites More sharing options...
Recommended Posts