[GUIDE]+[STUDIO] ZOTAC GEForce 9300 WIFI DDR2 and DDR3 Snow --> ML TEST 1082 sleep #795

[mrdale]

I spoke too soon. After waking from a sleep, the BIOS get's reset. So when I restart I have to reenter all the settings. Anyone else experiencing this?

[Hugo_bee]

i'm on dp4 with gtx460 with hdmi.. but no audio..any solution?tnxx

 

can't help you

I can't go dp4.. don't know why!

mrdale.. I don't have 10.6.7

but ioahci and legacy kext are not needed

if you don't want to use a biosmod.. use my dsdt with base bios

I'm not using latest bios.. because zotac forum suggest to use previous.. that has better response with fan

[ginosih]

grazie ugo, sto provando di tutto, ma nada

[Hugo_bee]

grazie ugo, sto provando di tutto, ma nada

 

e quindi?

 

riesci a tornare indietro?

io ho dischi usb per ogni versione.. dp3, setup dp3, dp4 e setup dp4

 

ma scusa poi.. non dovrebbe essere uscito il definitivo?

[mrdale]

Looks like 10.6.8 breaks the Zotac... -v gets halted at. "PCI Configuration Begin" Any ideas?

[ginosih]

e quindi?

 

riesci a tornare indietro?

io ho dischi usb per ogni versione.. dp3, setup dp3, dp4 e setup dp4

 

ma scusa poi.. non dovrebbe essere uscito il definitivo?

 

tornare indietro a cosa? cmq il mio prob è questo, sono bloccato ora alla dp4 11A480e e ho un aggiornamento software alla 11a494a, se lo faccio, a metà download mi dà KP, dovuto probabilmente all'acpi o boh... e ora sto cercando l'audio per la mia attuale versione 11a480e..a proposito, che chipset audio monta la mini itx G-H-I 9300 mini itx? tnxx

[Hugo_bee]

tornare indietro a cosa? cmq il mio prob è questo, sono bloccato ora alla dp4 11A480e e ho un aggiornamento software alla 11a494a, se lo faccio, a metà download mi dà KP, dovuto probabilmente all'acpi o boh... e ora sto cercando l'audio per la mia attuale versione 11a480e..a proposito, che chipset audio monta la mini itx G-H-I 9300 mini itx? tnxx

 

non so. io zotac solo la geforce 9300. è la mia fidanzata .. non la mollo più!

 

per il reset cmos occorre andarea a fondo.. seguire il tread che cresce giorno per giorno

http://www.insanelymac.com/forum/index.php...t&p=1701885

[golimpio]

Wifi not working after 10.6.8

I've fixed it by adding:

SMboardproduct
Mac-F4208CC8

in smbios.plist (as described here)

[alexylee]

Should we replace the following kexts from 10.6.7 to let the spinning wheel works as normal?

 

AppleACPIPlatform.kext

IOPCIFamily.kext

[Hugo_bee]

don't know. I'm afraid to do upgrade.. no times I'm near vacations

 

O_o

[motassa]

hello,

I'm new in hackintosh. I try to learn all that I can, but I have a problem.

Firstly my pc specs:

 

PC:

ACPI x64-based PC

OS Microsoft Windows 7 Home Premium

DirectX DirectX 11.0

 

Motherboard:

CPU DualCore Intel Pentium E5700, 3000 MHz (15 x 200)

motherboard Zotac GeForce 9300-ITX-WiFi DDR3

Chipset motherboard nVIDIA MCP7A

Memory sistem [ TRIAL VERSION ]

DIMM1: Kingston 99U5471-002.A00LF 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)

DIMM2: Kingston 99U5471-002.A00LF [ TRIAL VERSION ]

BIOS AMI (03/24/10)

Port(COM1)

 

Monitor:

Placa de video NVIDIA GeForce GT 430 (1024 MB)

Placa de video NVIDIA GeForce GT 430 (1024 MB)

Aceleradora 3D nVIDIA GeForce GT 430

Monitor Dell E1910 (Digital) [19" LCD] (X237R05P02JS)

 

Multimedia:

audio nVIDIA HDMI @ nVIDIA MCP79/7A - High Definition Audio Controller

audio nVIDIA HDMI/DP @ nVIDIA GF108 - High Definition Audio Controller

Placa de sonido nVIDIA HDMI/DP @ nVIDIA GF108 - High Definition Audio Controller

uaido nVIDIA HDMI/DP @ nVIDIA GF108 - High Definition Audio Controller

audio nVIDIA HDMI/DP @ nVIDIA GF108 - High Definition Audio Controller

audio Realtek ALC662 @ nVIDIA MCP79/7A - High Definition Audio Controller

 

 

Controlador IDE Controladora estándar PCI IDE de doble canal

Controlador de almacenamiento APIXZVTB IDE Controller

Disco rígido ST3500413AS ATA Device (500 GB, 7200 RPM, SATA-III)

Disco rígido ST3500413AS ATA Device (500 GB, 7200 RPM, SATA-III)

Disco óptico HL-DT-ST DVDRAM GH22NS50 ATA Device (DVD+R9:16x, DVD-R9:12x, DVD+RW:22x/8x, DVD-RW:22x/6x, DVD-RAM:12x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)

Estado SMART de los discos rígidos OK

 

Partitions:

C: (NTFS) [ TRIAL VERSION ]

Tamaño total [ TRIAL VERSION ]

 

Dispositivos de entrada:

Teclado Dispositivo de teclado HID

Mouse Mouse compatible con HID

Controladores de juegos Controla. Microsoft PC-joystick

 

Red:

Dirección IP primaria [ TRIAL VERSION ]

Dirección MAC primaria 00-12-7B-4C-C0-5B

Placa de red NVIDIA nForce 10/100/1000 Mbps Ethernet (192. [ TRIAL VERSION ])

Placa de red VIA Technologies USB Wireless LAN Adapter (192. [ TRIAL VERSION ])

 

 

I have two HDD, one with win7 and the other blank waiting to give ti format in macos.

I'm booting from dvd (iatkos s3v2) and I can choose with chameleon that I want to install from that dvd. Once it begins (after 30 seconds) I have the apple but with a forbidden sign over.

I boot and I write the command -v and here you have the error:

"NVEnabler::probe fails

USBF: 0,721 EHCI controller unable to take control from BIOS

USBF: 0,723 Apple USBECHCI [0x6933800] unable to obtain ownership 0xe00002be

USBF: 0,723 Apple USBECHCI [0x6933800] UIMInitralize-Error o unrreal 0xe00002be

USBF: 0,723 Apple USBECHCI [0x6933800] Start unable to initialize UIM.

Still waiting for root device.

 

Does anybody know exacly how can configure my bios setup for my motherboard: Zotac geforce 9300 ITX-WiFi DDR3 K-E?

Any help?

Thanks a lot!

[mrdale]

Did you even read the first post motassa? full instructions are there.

[Hugo_bee]

hello,

I'm new in hackintosh. I try to learn all that I can, but I have a problem.

Firstly my pc specs:

 

agree with mrdale

 

so you can choose between a normal setup.. but you've to use an external usb drive to perform experiences.. I see you're noob ehe

 

second.. apply the k-e biosmod.. as me.

and follow 1st post

 

remember: is not easy to comprehend the guide if you're first.. indeed most of terms used take for assumed that you have spend a time doing setups.

 

 

 

 

--> FOR EVBD:

TESTED LION GM .. run OK. only DP4 never run in my k-E ddr3

[golimpio]

Lion GM is working here as well (G-E DDR2)

 

The only problem I had was a CMOS reset (but only if I put it to sleep).

I have applied the patch from here:

http://www.insanelymac.com/forum/index.php...amp;pid=1707182

and it's working fine now.

[motassa]

Thanks guys,

I've read an I've printed as well all first post, but it's really hard for me understanding, but I'm triyng...

Well, thanks for your help again.

[Hugo_bee]

Lion GM is working here as well (G-E DDR2)

 

The only problem I had was a CMOS reset (but only if I put it to sleep).

I have applied the patch from here:

http://www.insanelymac.com/forum/index.php...amp;pid=1707182

and it's working fine now.

 

correct.. i decided to test soonely.. but.. FANTASTIC!! good you to test for us!

 

great!

[Hugo_bee]

CONFIRM WORK RTC CMOS RESET FIX

 

perl -pi -e 's|\x8b\x45\xc8\x39\x45\xcc\x74\x0b|\x8b\x45\xc8\x39\x45\xcc\xeb\x0b|; s|\x8b\x45\xb4\x39\x45\xb8\x74\x08|\x8b\x45\xb4\x39\x45\xb8\xeb\x08|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC

 

on lion GM

 

and no more reset cmos error at boot after a wake from sleep

[Hugo_bee]

please someone try for me if those solutions work to solve

the Hidden text in verbose boot after [PCI CONFIGURATION begin]

 

with boot flag

-v npci=0×2000

 

and to bypass all kext loading by creating he kextcache with the command

sudo kextcache -v 1 -a i386 -a x86_64 -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions

[mrdale]

My new Q9550 (45nm) processor causes two big problems with this mobo.

 

1. Sound is crackly
   
2. System clock loses significant time
   

 

The BIOS is also resetting after waking from sleep and subsequently restarting.

 

I have 8GB Ram and am overclocking the bus to 1415 (FSB of 849 linked) to achieve 3 Ghz, which is stable. Using 10.6.8 the latest config from this forum and Chimera from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].

 

The time/sound/BIOS reset issue persists even if I do not overclock.

 

Any wisdom? Please help. Should I be explicitly setting my processor/bus speed somewhere?

[KrzychuG]

Any solution/tutorial for painless update to Lion (from 10.6.8) on G-E revision or should i just stick to Chameleon guide and pray?

[Play]

Does anyone have a fix for the sound on 10.6.8?

 

edit: Found one: http://www.kexts.com/view/423-voodoohda.html

[Gammelfrog]

So the actual state is:

all Features of the 9300 work fine exept for mic in and the via Wlan chip?

 

regards

Gammelfrog

[yozik]

just wanted to say thanks to all who put time into making the BIOS mods, applehda next and instructions, I was able to successfully update to 10.7 after I did the bios mod. everything works as it did before.

 

 

great job folks!!

 

yozik

 

fyi not sure about the mic as I have never used it or the wifi as I haven't needed it

 

please someone try for me if those solutions work to solve

the Hidden text in verbose boot after [PCI CONFIGURATION begin]

 

with boot flag

-v npci=0×2000

 

and to bypass all kext loading by creating he kextcache with the command

sudo kextcache -v 1 -a i386 -a x86_64 -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions

 

 

I tried out the -v npci=0x2000 and say report back that the missing text is now shown

 

yozik

[KrzychuG]

Uhm, well, i'm following a guide to install Lion from pendrive and kinda stuck. I've got 8GB pendrive prepared, restored basesystem, copied packages, installed extra for Lion and Chameleon. Now, the problem is that if i try to start computer with that pendrive plugged in, it just hangs / freezes, right after it prints out what CPU i have installed. If i unplug that pendrive everyting works. If i disable mass storage in BIOS it also works, but wont' boot from pendrive. If i try to plug that pendrive in BIOS, everything freezes. If i plug the same pendrive without installing Chameleon on it, computer also work but won't boot from it.

 

I already tried few varios Chameleon version starting from 1083 (from guide), through 1140, 1227, 1212, even tried installing it manually. Same issue everyting, makes me mad already.

 

// Update:

 

Installed Lion from Portable HDD after all, but problem's still there.

[yozik]

Uhm, well, i'm following a guide to install Lion from pendrive and kinda stuck. I've got 8GB pendrive prepared, restored basesystem, copied packages, installed extra for Lion and Chameleon. Now, the problem is that if i try to start computer with that pendrive plugged in, it just hangs / freezes, right after it prints out what CPU i have installed. If i unplug that pendrive everyting works. If i disable mass storage in BIOS it also works, but wont' boot from pendrive. If i try to plug that pendrive in BIOS, everything freezes. If i plug the same pendrive without installing Chameleon on it, computer also work but won't boot from it.

 

I already tried few varios Chameleon version starting from 1083 (from guide), through 1140, 1227, 1212, even tried installing it manually. Same issue everyting, makes me mad already.

 

// Update:

 

Installed Lion from Portable HDD after all, but problem's still there.

 

 

Yeh I had that problem too. I ended up following the [GUIDE] Installing Lion DP4 + GM Without USB(Video) and doing the two partition HDD method

 

Yozik