cororok Posted April 14, 2009 Share Posted April 14, 2009 VoodooHDA 0.2.2 released where can i get 0.2.2 ? Link to comment Share on other sites More sharing options...
verdant Posted April 15, 2009 Share Posted April 15, 2009 where can i get 0.2.2 ? Go here...... Link to comment Share on other sites More sharing options...
DB1 Posted April 15, 2009 Share Posted April 15, 2009 where can i get 0.2.2 ? VoodooHDA Link to comment Share on other sites More sharing options...
cororok Posted April 15, 2009 Share Posted April 15, 2009 Go here...... thank you !!! man Link to comment Share on other sites More sharing options...
cororok Posted April 15, 2009 Share Posted April 15, 2009 thank you !!! man asus eeepc 1000H ALC269 0.2.2 mic doesn't work. but 0.2.1 mic worked well Link to comment Share on other sites More sharing options...
pippo choi Posted April 15, 2009 Share Posted April 15, 2009 This is my code code.txt Link to comment Share on other sites More sharing options...
iRipper Posted April 15, 2009 Share Posted April 15, 2009 Works with ALC662 on P5KPL, gives 2 speaker output, headphones also work connected to the front panel, no info on the System Profiler though. Keep up the good work Voodoo Team, cos this might be a breaktrough ! Thanks ! Dump.rtf Link to comment Share on other sites More sharing options...
Beerkex'd Posted April 15, 2009 Share Posted April 15, 2009 Works partially on ADI2000B/ASUS P5Q-E. Full bug report + codec dump: http://forum.voodooprojects.org/index.php/topic,147.0.html Link to comment Share on other sites More sharing options...
supermx3 Posted April 15, 2009 Share Posted April 15, 2009 works on the system in my sig BUT i can only test 2 speaks out on the back panel, i dont have a front panel and no mic to check it with Link to comment Share on other sites More sharing options...
sgamoct Posted April 15, 2009 Share Posted April 15, 2009 Hi, don't work with ALC880 D ich6 or is my problem only? Link to comment Share on other sites More sharing options...
muhandis Posted April 15, 2009 Share Posted April 15, 2009 just tested it on my adi988, and it works but have not tested other inputs/outputs. will post especially if i can test the spdif or optical inputs. cheers to the dev team. :c Link to comment Share on other sites More sharing options...
giuliastro Posted April 15, 2009 Share Posted April 15, 2009 I am still using version 2.1 on my HP Mini + no mic (btw really thanks, great job voodoo team!). Version 2.2 doesn't work fine with me since on my HP volume is controlled by PCM and with 2.2 I cannot select PCM as an output source. Link to comment Share on other sites More sharing options...
verdant Posted April 15, 2009 Share Posted April 15, 2009 Tried VoodooHDA.kext v0.2.2 on my Asus P5N32-E SLI Plus MOBO with Asus SupremeFX Audio Card (with AD1988b audio codec) and find that Mute is now working.........autoswitching between speakers (unknown) on rear port and headphones on front port is still not working....not able to test SPDIF-out...... Link to comment Share on other sites More sharing options...
El Massman Posted April 15, 2009 Share Posted April 15, 2009 i like it. been using appleHDA on the P5W DH and until now haven't been able to change the volume on the optical out. now i can. i've lost the second line out but since i don't use that it's of no real concern for the moment. nice work. Link to comment Share on other sites More sharing options...
Sam2x Posted April 15, 2009 Share Posted April 15, 2009 thx a lot work great with my HP6710B AD1981HD Link to comment Share on other sites More sharing options...
Murrfk Posted April 16, 2009 Share Posted April 16, 2009 Is there a generic kext that can be installed, or does each user have to create one using the Xcode process? Link to comment Share on other sites More sharing options...
supermx3 Posted April 16, 2009 Share Posted April 16, 2009 noticed something interesting with mine, i can control the volume on the keyboard but when i mute it it shows that its muted but isnt really muted, never had this issue with the azalia kext but no biggie Link to comment Share on other sites More sharing options...
Sauk Posted April 16, 2009 Share Posted April 16, 2009 This worked perfectly for me. You can see my hardware in my signature. Link to comment Share on other sites More sharing options...
Dr. Hurt Posted April 16, 2009 Share Posted April 16, 2009 Result for 0.2.2 with ALC662: Much better than the previous version in terms of sound quality (but patched AppleHDA is still better). Also no more sound stuttering. Rear Mic: NOT working Rear Line-in: NOT working Rear Line-out: Working Well Front Headphone: Speakers OK / Mic not working. Auto switching works. DUMP.txt Link to comment Share on other sites More sharing options...
Hugo_bee Posted April 16, 2009 Share Posted April 16, 2009 1st: thanks for your intensive work! now i'm testing 4th version in ACER 5930g in attached the codec#0 is alc888/s/t with front stereo, rear stereo, subwoofer output and jack HP as input there are a frontal mic stereo, a mic in jack and a line in jack, spdif out and hdmi with your last release I have frontal speaker ok, HP ok with auto switching, mic ext ok but no mic frontal internal. with your 3 release (with a lot of entry in the mixer) i saw that pcm0 - mixer 0 I can manage mic ext. and if i raise mixer 1 i hear a big noise.. but mic 1 doesn't match with internal mic thanks! ugo Link to comment Share on other sites More sharing options...
lukamar Posted April 17, 2009 Share Posted April 17, 2009 It supports IDT? Link to comment Share on other sites More sharing options...
underball Posted April 17, 2009 Share Posted April 17, 2009 It supports IDT? Yes. Works on the Intel DG45 series boards with IDT HD audio. Link to comment Share on other sites More sharing options...
fatsal Posted April 18, 2009 Share Posted April 18, 2009 i'm tryin on my ALC260 but there's no sound out of my notebook speaker. but when i'm tryin external speaker the sound came out but it's to low...i'm must full 100% volume to hear sound came out from my ext speaker. can anyone explain it to me ??? thanks Link to comment Share on other sites More sharing options...
ccharles Posted April 18, 2009 Share Posted April 18, 2009 Thx a lot for voodoo team's hard work. But the precompiled kexts (2.1 & 2.2) don't work with my 1986a ICH7 M of Lenovo Tianyi F40. Wondering whether I must compile the kext with xcode myself? Here I upload my dump codec of my lenovo Tianyi F40 laptop for your study. THX codec.txt Link to comment Share on other sites More sharing options...
Thireus Posted April 18, 2009 Share Posted April 18, 2009 This is the 0.2.2 modified version for my eeePC 1000H should work too on other eeePCs: --> http://thireus.dareyourmind.net/VoodooHDA_By_Thireus.zip EDIT: Check this thread: http://ipis-osx.wikidot.com/forum/t-152367...udio-in-working Install: You do have to delete appleazaliaaudio.kext and remove audiee from your login items for this to work. Then use Kext Helper to install the provided kext. Reboot, and enjoy! Changelog: 22/04/09: v.3 r8 build r8: Added improved port descriptions (VHDAEngine.h changed in r6) r7: Removed personal settings from earlier commit r6: Support for hints in Info.plist 18/04/09: v.2 Fixed: When you first want to mute the volume, and then get the sound back from the speakers it seems we need to play a bit with the volume so the sound will come back. But this happens only once after a boot 18/04/09: v.1 --------- This is the 0.2.2 modified version for my eeePC 1000H should work too on other eeePCs. What I did was just to set 100 to some default volume values which were 0 into the Tables.c file of the last VoodooHDA source code. For those who want to edit them to find a better configuration (as mine was a bit ramdom ) just have a look at the end of the Tables.c source. Here is my own modified version: 99, // SOUND_MIXER_VOLUME 50, // SOUND_MIXER_BASS 50, // SOUND_MIXER_TREBLE 99, // (was 75) SOUND_MIXER_SYNTH 99, // (was 75) SOUND_MIXER_PCM 99, // (was 75) SOUND_MIXER_SPEAKER 0, // (was 75) SOUND_MIXER_LINE //Thireus was 0 //doesn't work 0, // SOUND_MIXER_MIC //Thireus was 0 //doesn't work 90, // SOUND_MIXER_CD 0, // [?] SOUND_MIXER_IMIX //Thireus was 0 //doesn't work 0, // [?] SOUND_MIXER_ALTPCM //Thireus was 0 //doesn't work 99, // SOUND_MIXER_RECLEV //Thireus was 0 0, // SOUND_MIXER_IGAIN //Thireus was 0 50, // SOUND_MIXER_OGAIN 0, // (was 75) SOUND_MIXER_LINE1 //Thireus was 0 //doesn't work 0, // [?] SOUND_MIXER_LINE2 //Thireus was 0 //doesn't work 0, // [?] SOUND_MIXER_LINE3 //Thireus was 0 //doesn't work 99, // [?] SOUND_MIXER_DIGITAL1 //Thireus was 0 99, // [?] SOUND_MIXER_DIGITAL2 //Thireus was 0 99, // [?] SOUND_MIXER_DIGITAL3 //Thireus was 0 99, // [?] SOUND_MIXER_PHONEIN //Thireus was 0 99, // [?] SOUND_MIXER_PHONEOUT //Thireus was 0 99, // SOUND_MIXER_VIDEO 0, // [?] SOUND_MIXER_RADIO //Thireus was 0 0 // (was 75) SOUND_MIXER_MONITOR //Thireus was 0 Feel free to download the last source code and edit it: svn co http://voodoohda.googlecode.com/svn/trunk/ voodoohda-read-only I repeat, I just did a random edit of this file! **On my 1000h, only mono works well for both microphones (the one in front of the eee, and the jack on the left of the computer). There is too much noise for my taste but I'm sure there is an alternative to reduce noise ** I've also a little issue with my modified version: [FIXED] **When you first want to mute the volume, and then get the sound back from the speakers it seems we need to play a bit with the volume so the sound will come back. But this happens only once after a boot ** Link to comment Share on other sites More sharing options...
Recommended Posts