ptdesigner Posted October 7, 2009 Share Posted October 7, 2009 garageband --> add an input track --> monitor it Hello 'marionez', i just want to say thank you for your work. Link to comment Share on other sites More sharing options...
sweetbrett Posted October 7, 2009 Share Posted October 7, 2009 garageband --> add an input track --> monitor it same thing, i can see it registering sound on the VU but no sound is output to my speakers (connected to the Audigy) edit: i guess i was monitoring wrong before. finally saw the "monitore: on" in the bottom right, and now it does work. Thanks. Link to comment Share on other sites More sharing options...
caxio Posted October 7, 2009 Share Posted October 7, 2009 thanks i confirm works well in asus p6t se whit snow leopard 64 bit Link to comment Share on other sites More sharing options...
abg Posted October 8, 2009 Share Posted October 8, 2009 I lost the game to Snow Leo.... No way to get the ALC888 working. So I downgraded to 10.5.8, with 9.8.0 kernel. Had lots of KP. Then just used cpus=1 to get rid of them. Everything works fine now, except not getting both cores. Link to comment Share on other sites More sharing options...
Panther1 Posted October 8, 2009 Share Posted October 8, 2009 Hello to all! I just confirmed that the new 1200 series driver activates the line-in finally. I can now use Garage Band with a Guitar cord natively. The only weird thing is that it seems to be mono but hey I'll take it for now until it can be made to work on stereo. Thanks a million! Panther1 Ok I think I got it! Device informations: Realtek ALC1200 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Device ID: 0x3a3e8086 You can find ALC1200 on: Asus P5Q tested ok Asus P5Q3 tested ok Asus P5Q-EM tested ok Asus P5QL-EM tested ok Asus P5Q-Pro tested ok Asus P5Q-SE Asus P5Q-SE/R tested ok Asus P5Q-C tested ok Asus P6T tested ok Asus P6T-SE tested ok Asus P5QL-PRO it's an ALC888! Asus P6T deluxe it's an ALC888! Asus M3A78-EM it's an ALC888! Asus P5N7A-VM tested ok Asus P5QL-E tested ok Asus M3A-H/HDMI Asus M3A78-T Asus M3A78 PRO Asus P2-M3A3200 Asus M3N78-EM Asus P2-M3A3200 Gygabyte GA-EP43-S3L tested ok MSI P45 NEO3-FR tested ok Please signal errors, and missing motherboard (or laptop??) models ================================================== Snow Leopard 10.6 and above ALC1200 audio kext: ALC1200_106.zip ----------- OLD STUFF ALC1200 driver for 10.5.x : I think latest ALC1200_SLIM version could be considered "final", I'm running 10.5.6 and I'm working on this OSx version. For previous OSx version you can try installing only the ALC1200fix and the HDAEnabler from ALC1200_1056LINEIN version and see if that works. The other ALC1200 kext versions out on the forum are old and I think can even cause some shutdown/reboot issue. This driver doesn't need any ALCinjector. - SPDIF coaxial Digital Out working - Headphone working - Line in is working only in the slim and line-in version, read notes down this post ================================================== Works on 10.5.7, just download and reinstall the driver. Choose driver version, I think best choice is the slim version: 1. Update (4th june 2009) slim version from 10.5.7 applehda with: green line out, headphones, rear mic, line in and spdif out I removed not needed verbs for multiple channel output (I don't need them) ALC1200_1057_SLIM.zip 4th june 2009 10.5.7 version [latest] ---- ALC1200_SLIM.zip 19th april 2009 10.5.6 version (discontinued) 2. Normal version with no line-in, you can switch between front/rear mic without any trouble ALC1200_1056.zip 3. This is a beta version with all three input working, line-in, front mic and rear mic, front-mic has some trouble This version works but if you switch between inputs, front mic stops working (only for that session obviously, if you reboot it works). This happens because ALC1200 has 1 digital mixer node for 2 channel (linein and front mic) instead of one, so if you come back from line-in input, to front mic, front mic stops working. At the moment I would think this driver can't manage thing like this, so I don't know if we could have a better driver than this. Anyway I wanted a working line in and if you select this and use it, that works, so if you need line-in you should use this version. Update (14th april 2009) with RCA spdif in "about this mac" Update (17th april 2009) removed ALC1200fix.kext from the pack If you're updating your driver, in order to install this, remove ALC1200fix.kext from your extension folder, then install this with kexthelper. Now in sound preference there's no (useless) "Internal speaker" "Built in" for input and output. Howto install: - choose and download kexts pack for ALC1200 - remove ALCinjector.kext AppleHDA.kext ALC1200fix.kext and his friends from /System/Library/Extensions - remove /System/Library/Extension.mkext (not needed at all) - unpack the zip file - run kexthelper - install kexts - reboot Obviously backup kexts you need. ================================================== Thanks the whole forum, especially this thread, TheKing and Taruga Removed verbs they're too large. This is how looks like About this mac: You're lucky, enjoy it!! Link to comment Share on other sites More sharing options...
marionez Posted October 8, 2009 Author Share Posted October 8, 2009 Panther you're wrong, is not a mono, I'm sure about this, I plugged two different instruments on L and R channel and I can hear both. Check that. Link to comment Share on other sites More sharing options...
tokyovigilante Posted October 9, 2009 Share Posted October 9, 2009 Hi marionez, thanks for your hard work on this. I have an ASUS P6T SE, and line out/headphones work fine, but not optical SPDIF. Is coax the only SPDIF out supported, or is there something I'm missing? EDIT: Never mind, working fine after reboot. Thanks! Link to comment Share on other sites More sharing options...
dj_Duff Posted October 9, 2009 Share Posted October 9, 2009 Fesco, did you modify latest Marionez's Alc1200_106 kexts to make ac3\dts passthru work? Or it works out-of-the-box? If you have modified, can you share this? ------- I have P5QL Pro. are you 100% sure it has alc888 and not ALC1200? Cause with your ALC1200_1056 and ALC_1057slim everything WORKS GREAAAT on Leo 10.5.8!! And Asus.com says this mobo has ALC1200.. Even SPDIF AC3/DTS passthru! To enable passthru i had to follow these steps: 1. install Perian 2. in Terminal write: defaults write com.cod3r.a52codec attemptPassthrough 1 defaults write org.perian.Perian attemptDTSPassthrough 1 3. install PLEX and in "preferences - system - audio" select digital interface, then "force detection" and mark DTS and Dolby Digital. 4. ENJOY! I dont know why, but in VLC I have only PCM STEREO Perhaps there are some specific settings. BTW, AppleHDA edited by Fesco doesn't work for my mobo. I hope this information is helpful for P5QL Pro owners and others, who have problems with 5.1 SPDIF! I've tried ALL available kexts to get my audio work - and ALC1200_1057slim is THE BEST! Great work, Marionez! Link to comment Share on other sites More sharing options...
happyjohn Posted October 11, 2009 Share Posted October 11, 2009 Hello Marionez! You always did a great job for us and I highly appreciate it. Unfortunately this time I could get the sound working properly on my P5Q3 Under the Snow Leopard (x64). I installed the kext for SL into /S/L/E, repaired permissions and rebooted. After that I expected at least to see something in my system profiler, but there was nothing at all. I then tried to instal your kext (AppleHDA) in the Extra/Extensions on my hidden EFI partition. The same... In case it matters, I use the Chameleon RC2 + PCI EFI 10.3 on Vanilla Snow Leo. Can you please help me to find out what's the point for in my situation? Thanks! John Link to comment Share on other sites More sharing options...
marionez Posted October 12, 2009 Author Share Posted October 12, 2009 You have some garbage in /Extra/Extension or in S/L/E try finding and removing applehda hdaenabler azalia voodoohda and everything you could have installed. Maybe even some dsdt patching? If that worked on 10.5x this should work on SL Link to comment Share on other sites More sharing options...
pechspilz Posted October 12, 2009 Share Posted October 12, 2009 I just want to leave marionez a big fat thank you . It works very well on my ASUS P6T non-SE in 64-bit kernel mode. Link to comment Share on other sites More sharing options...
dj_Duff Posted October 13, 2009 Share Posted October 13, 2009 I've just tested ALC1200_106 kext on my P5QL PRO mobo in SL - SPDIF works! With AC3/DTS passthru! Does this mean, that P5QL PRO has ALC1200, not ALC888? Marionez, change info on this mobo in the first message of topic, plz! Link to comment Share on other sites More sharing options...
marionez Posted October 14, 2009 Author Share Posted October 14, 2009 Man excuse me, but there's an old post (somewhere) where a user says that P5QL PRO has ALC888, so that's good you have ALC1200 I'm going to edit first post Link to comment Share on other sites More sharing options...
dj_Duff Posted October 14, 2009 Share Posted October 14, 2009 Man excuse me, but there's an old post (somewhere) where a user says that P5QL PRO has ALC888, so that's good you have ALC1200 I'm going to edit first post Yeah, i know.. I've read all thread and was very disappointed when heard about P5QL Pro has ALC888 ( Here is that post: http://www.insanelymac.com/forum/index.php...t&p=1134930 I didn't make any dumps in Linux, but your driver works for my mobo, so i think this is the best proof that it has ALC1200 ) Oh, btw official global Asus website says, that P5QL Pro has ALC1200 http://www.asus.com/product.aspx?P_ID=YYer...&templete=2 Thanks! Link to comment Share on other sites More sharing options...
pechspilz Posted October 14, 2009 Share Posted October 14, 2009 marionez, do you have an idea why the default sound output is always set to headphones after rebooting? I always have to set it to line out again and again. Link to comment Share on other sites More sharing options...
marionez Posted October 15, 2009 Author Share Posted October 15, 2009 Mmm no idea... maybe some software you installed, it's quite strange it happens on a vanilla installation Link to comment Share on other sites More sharing options...
pechspilz Posted October 15, 2009 Share Posted October 15, 2009 Mmm no idea... maybe some software you installed, it's quite strange it happens on a vanilla installation Nope, no software, I just tried it on a freshly installed vanilla kernel 10.6.0. Link to comment Share on other sites More sharing options...
marionez Posted October 16, 2009 Author Share Posted October 16, 2009 update to 10.6.1 ? Link to comment Share on other sites More sharing options...
pechspilz Posted October 18, 2009 Share Posted October 18, 2009 Solved by deleting the plists in /Library/Preferences/Audio, selecting Line Out and restarting. Link to comment Share on other sites More sharing options...
sokilw Posted October 28, 2009 Share Posted October 28, 2009 Some occasional combination of kexts for 10.5 working: Out- speaker+ SPDIF+ headphones Input- Mic + line in But the critical improvement: No more annoyed "POP" sound when volume is being changed! This is not my work- it's occasional combination of kexts final_sound_for_p5qpro__10.5_.zip Link to comment Share on other sites More sharing options...
marionez Posted October 29, 2009 Author Share Posted October 29, 2009 about pop tmongkol in this thread: http://www.insanelymac.com/forum/index.php...t&p=1162480 Link to comment Share on other sites More sharing options...
sokilw Posted October 29, 2009 Share Posted October 29, 2009 about pop tmongkol in this thread: http://www.insanelymac.com/forum/index.php...t&p=1162480 AND it solves problem if You not use Chameleon 2-3... because this link is based on smbios chameleonism Link to comment Share on other sites More sharing options...
PacStealer Posted October 31, 2009 Share Posted October 31, 2009 the mic doesnt work for me with the first post kext Link to comment Share on other sites More sharing options...
marionez Posted November 2, 2009 Author Share Posted November 2, 2009 Unprobable... Link to comment Share on other sites More sharing options...
PacStealer Posted November 2, 2009 Share Posted November 2, 2009 Unprobable... how can i test it? in prefpane the input doesnt work for me.. the audio bar doesnt lift up when i talk at the mic Link to comment Share on other sites More sharing options...
Recommended Posts