galin Dimitroff Posted April 20, 2009 Share Posted April 20, 2009 Slim version is working fine on P5QL-E. I will try the shutdown later. Link to comment Share on other sites More sharing options...
marionez Posted April 22, 2009 Author Share Posted April 22, 2009 Ok, about multichannel output I was wrong, read this: http://www.insanelymac.com/forum/index.php?showtopic=87336 At this point, I'm not really interested in a multichannel output, because I don't use and so I even have some difficult to test something like this. I think I'll wait for 10.5.7 update then I'll see what happens Link to comment Share on other sites More sharing options...
kayoone Posted April 22, 2009 Share Posted April 22, 2009 First of all i want to thank you for your great work, unfortunatly i have some problems with my P5Q Pro. With the normal driver (your first choice) i get both Output (Front and Rear) Working, with your second choice driver i can only get the Front Out working, no matter what i set in the prefpane. However, no matter which driver I use, i simply cant get the MIC to work at all, which is a really bummer :/ Hope you can help me. When reinstalling i delete AppleHDA.kext and HDAEnabler.kext and reinstall the new ones with kexthelper. I then reboot and do a kextload HDAEnabler.kext to get sound Output working, with the problems described above however. Link to comment Share on other sites More sharing options...
marionez Posted April 22, 2009 Author Share Posted April 22, 2009 Did you remove ALC1200fix.kext? I disabled front mic in slim version, but rear mic works (it's the pink input). If on your mobo even rear mic doesn't work (with the slim version) I think you've got an ALC1200 with a different codec dump. So should be useful if you produce one on your own and attach here. On linux should be something like: cat /proc/asound/card0/codec#0 > codec.txt Tested again with garage band, rear mic works with slim version. Link to comment Share on other sites More sharing options...
kayoone Posted April 22, 2009 Share Posted April 22, 2009 hi there. Okay, the rear out not working was due to me plugging into the wrong input The mic also works, but its very very silent...anything like mic boost on osx ? thx for your help *edit* Okay, got the mic now working too. Was a problem with the mic input volume...it changes itself while speaking though, but i think only when being in prefpane. Link to comment Share on other sites More sharing options...
savestheday Posted April 24, 2009 Share Posted April 24, 2009 If I wasn't already getting married, I'd marry you marionez you just made my HTPC build with the P5N7A-VM complete! THANK YOU! Link to comment Share on other sites More sharing options...
marionez Posted April 29, 2009 Author Share Posted April 29, 2009 Well! Guys anyone with Vista installed can follow this procedure: http://www.insanelymac.com/forum/index.php?showtopic=137188 ? It would be nice checking verbs from vista with those I have from alsa linux. I don't have vista installed... thanks Link to comment Share on other sites More sharing options...
rwmanos Posted May 5, 2009 Share Posted May 5, 2009 hello realy thanks for this driver add P5QC in the list too Link to comment Share on other sites More sharing options...
Hugo_bee Posted May 5, 2009 Share Posted May 5, 2009 Asus P5N7A-VM it's a alc888.. I tried today your solution.. only ext mic works I see and can change selection in output panel.. but no sound. Link to comment Share on other sites More sharing options...
marionez Posted May 6, 2009 Author Share Posted May 6, 2009 Ok thanks, I changed first post... these alc888 known as alc1200 are quite strange... Link to comment Share on other sites More sharing options...
El Gringo Posted May 7, 2009 Share Posted May 7, 2009 Hey, I hear that the ASUS P6T has an ALC888 here. But on my linux dump it says ALC1200. What should I believe ? I've tried many things, like the AppleHDA patcher, but nothing works. Here's my dump: Codec: Realtek ALC1200 Address: 0 Vendor Id: 0x10ec0888 Subsystem Id: 0x10438357 Revision Id: 0x100101 the full one is attached. alc1200.txt Link to comment Share on other sites More sharing options...
marionez Posted May 7, 2009 Author Share Posted May 7, 2009 El gringo did you tried installing slim version? Does that work? I'll check your codec dump in a near future Link to comment Share on other sites More sharing options...
El Gringo Posted May 7, 2009 Share Posted May 7, 2009 El gringo did you tried installing slim version? Does that work?I'll check your codec dump in a near future It worked !! Good. Sound is hashed though. But at least I can see inputs and outputs in the system profiler. I'll check if I can have a better sound. Would it change something if I patch it with HDAPatcher and my linux dump ? Link to comment Share on other sites More sharing options...
diby Posted May 9, 2009 Share Posted May 9, 2009 Hey Marionez! seriously great work you cant imagine how amazing this is! one thing i do want to ask, is it possible for me to have 2 different outputs at the same time (eg. front green output and back green output together?) my ableton live does not show a secondary output do you get what i mean? if not please pm me yours diby-amir Link to comment Share on other sites More sharing options...
marionez Posted May 10, 2009 Author Share Posted May 10, 2009 It worked !! Good. Sound is hashed though. But at least I can see inputs and outputs in the system profiler.I'll check if I can have a better sound. Would it change something if I patch it with HDAPatcher and my linux dump ? Let me understand, that works? What do you mean with hashed? I'll take a look on your codec dump Diby, you can follow this http://www.apple.com/pro/techniques/aggregateaudio/ and this and see if you can reach something... I tried but I can't manage how to do that. I think that should be related with verbs we are using at the moment. But as I stated I'll not touch the driver until 10.5.7 is out. Link to comment Share on other sites More sharing options...
marionez Posted May 11, 2009 Author Share Posted May 11, 2009 El Gringo I checked your codec dump. You have the same pin configuration, but subsystem ID is different and even some pin default, so even verbs. P5Q Subsystem Id: 272859902 node 25 Pin Default 44146016: [Jack] Mic at Ext Front node 27 Pin Default 35736864: [Jack] HP Out at Ext Front node 30 Pin Default 21262640: [Jack] SPDIF Out at Ext Rear P6T Subsystem Id: 272859991 node 25 Pin Default 44145760: [Jack] Mic at Ext Front node 27 Pin Default 35736608: [Jack] HP Out at Ext Front node 30 Pin Default 21324080: [Jack] SPDIF Out at Ext Rear Try with this attached on your P6T P6T_ALC1200_SLIM.zip Link to comment Share on other sites More sharing options...
smoothdvd Posted May 13, 2009 Share Posted May 13, 2009 does slim version work on 10.5.7? Link to comment Share on other sites More sharing options...
marionez Posted May 13, 2009 Author Share Posted May 13, 2009 Yes that works here on 10.5.7, obviously you need to download slim version and reinstall the driver after update. Shutd/reboot now is broken, but I believe has something to do with this http://www.insanelymac.com/forum/index.php...aded&start= according to this: http://www.insanelymac.com/forum/index.php...t&p=1117842 If anyone has shutd/reb working, please signal howto solve that. My shut/reb problem was related with my ps2 mouse kext driver, here: http://www.insanelymac.com/forum/index.php...t&p=1114415 Link to comment Share on other sites More sharing options...
marionez Posted May 14, 2009 Author Share Posted May 14, 2009 I tried to import Info.plist configuration from 10.5.6 applehda to the 10.5.7, but it's not working the same. Audio input is broken. With the first post slim version everything works. THIS IS NOT WORKING, so download that if you want to help, not for normal use (for normal use, download slim version from first post). ALC1200_1057.zip Link to comment Share on other sites More sharing options...
nziria Posted May 16, 2009 Share Posted May 16, 2009 marionez ho provato tutti i kext nel thread ma niente da fare nelle informazioni sul mac esce questo 2 voci: Audio ad alta definizione Intel: ID dispositivo: 0x174BAA30 ID audio: 12 Dispositivi disponibili: Audio ad alta definizione Intel: ID dispositivo: 0x104382FE ID audio: 12 Dispositivi disponibili: nei dispositivi audio non segna nulla,nessun dispositivo gli unici kext che mi fanno funzionare l'audio sono questi,li allego ho un asus p5q kext_p5q.zip Link to comment Share on other sites More sharing options...
marionez Posted May 16, 2009 Author Share Posted May 16, 2009 [speak in English ] I don't know what is this: ID dispositivo: 0x174BAA30 ID audio: 12 Dispositivi disponibili: Anyway the driver works, so there's some problem on your own. Maybe you have to clean your /System/Library/Extension of unwanted kexts. I think you installed some other audio drivers, this explain why you've got ALC1200 and another audio device in "about this mac". Link to comment Share on other sites More sharing options...
nziria Posted May 16, 2009 Share Posted May 16, 2009 [speak in English ]I don't know what is this: ID dispositivo: 0x174BAA30 ID audio: 12 Dispositivi disponibili: Anyway the driver works, so there's some problem on your own. Maybe you have to clean your /System/Library/Extension of unwanted kexts. I think you installed some other audio drivers, this explain why you've got ALC1200 and another audio device in "about this mac". no,in the installation i have'nt selected anything when i log in leopard i install the kext that i posted early i have only shutdown problem,no matter for the multi line out at this time Link to comment Share on other sites More sharing options...
marionez Posted May 16, 2009 Author Share Posted May 16, 2009 It's not an opinion matter... this driver works on P5Q, so if you have a P5Q with 10.5.6 or 10.5.7 this will work. If not, you have some kind of problem on your own. If you tell me that "about this mac" says there's two audio device, you have some kind of problem with kext installed, and sometimes is not so simple to find those in extension because they're many. Another possible thing is something in BIOS settings, default settings are good here. Link to comment Share on other sites More sharing options...
marionez Posted May 16, 2009 Author Share Posted May 16, 2009 My shut/reb problem was solved, it was caused by voodoops2, here: http://www.insanelymac.com/forum/index.php...t&p=1158526 The good news is that ALC1200_SLIM version continues to works well even on 10.5.7 finally, with a great 100% reb/shutd. Link to comment Share on other sites More sharing options...
Dream Sequencer Posted May 20, 2009 Share Posted May 20, 2009 hi marionez, i tried the SLIM driver and it works but it bumps my speakers everytime it starts a sound. for example, i'm in silence, i click on a song, it produces a little bump noise and then starts the song. it happens to you? Link to comment Share on other sites More sharing options...
Recommended Posts