flyboy_1313 Posted August 6, 2010 Share Posted August 6, 2010 super !!!! just need to find a link for download the correct extension for the lan the link to the sound driver is not working can anyone please upload it thanks a million Link to comment Share on other sites More sharing options...
glinan Posted August 8, 2010 Share Posted August 8, 2010 Hi, i've been thinking of getting the ASUS P5KPL-AM motherboard. But there's different kinds in the market right now (that i have access), as of the moment i have 2 choices: - ASUS P5KPL-AM EPU - ASUS P5KPL-AM SE I can't seem to find the one that you have which is ASUS P5KPL-AM/PS, can you explain me the differences? Are they all the same thing? Would your guide work on these motherboards aswell? And lastly, how's does everything work with this motherboard? As in everything? I hope you'll able to help me. Link to comment Share on other sites More sharing options...
mikeweston Posted September 28, 2010 Share Posted September 28, 2010 Well.... I had to re-install 3 times...but that was my own fault I think. So far so good. I was going to use my Ralink RT2500 USB for wireless to begin with, but it managed to cause a panic when inserted into the rear USB ports, so I plugged in my D-Link DWA-547 A/B/G/N card....Worked out of the box as Airport card, awesome. I also connected the lan to my ethernet cable, got an I.P instantly and was off and running it too worked out of the box. Only problem so far is shutdown. Fans keep going until I press the power button. Sleep doesnt resume!!..... I am on Vanilla kernel, I selected no kernel from the boxes and I only selected NVinject for the 9500GT (The 512mb kext on it's own left me with 1280x800 res and nothing else but blue screens ( I re-installed and just checked NVinject, by default it selects all memory sizes) along with Networking (RT2500 USB) and iDeneb apps. Everything is working quite well other than those few hickups... My setup is nearly identical to the first post. I'm using an 80GB Samsung as well for now (IDE) as I will shovel a 500GB drive in here soon (sata) and go from there using a time machine backup of this setup next time around I had trouble with the resolution initially. My LCD is only 17" (Viewsonic/Black) and it's max res is 1440x900 If I selected the full resolution the screen would go blue and stay there!! I had to reset the machine and it would go 1280x800 on reboot. After about 4 goes of selecting 1440x900 it stuck. I rebooted and it displayed properly!!! Bizarre. As I mentioned I'm running a 9500GT 512mb card. With the NVdarwin kexts I got the boot screen and then the display went to "no signal".......blank. The hard drive continued to whirl and then nothing......so I tried -x and still nothing. Tried booting 800x600 and nothing happened either (re-install) Anyway, it works well for now. I would like sleep to work, and proper shutdown. If anyone can explain my USB issue with the Ralink Wireless dongle I'd appreciate it, I'm hoping this doesn't happen to other devices I need to use in the future (kernel panic, must check the logs) I'm using a logitech wireless keyboard and G5 mouse and both work on USB fine......no issues with those devices. EDIT:...Full Shutdown now works. No fans... *Have OC'ed my E5200 to 3.01Ghz, stable and fast.....V-Happy with this Hack rig. Hi i installed Ideneb v1.4 and after installation i got the message failed to load apple acpi pci. i have tried all the -v -s -x etc but stI installed IDENEB v1.4 on my pc and after the ]installation[/color] it asked to restart, so i did, after that it wont boot, theres the apple wheel rolling and the "no smoking kinda sign". So i tried typing -v on boot cause other commands wont work. well anyways i got the message failed to load apple acpi pci something. please help me. im really desperate. it says couldnnt alloc class apple acpi pci 12Appleacpipci is not compatible with its superclass 11iopcibridge supercalss. (yellow fonts) please help me. i already tried typing v -cpus=1 -noacpi but still nothing. Same problem. It just always gives me the same message. PROCESSOR: Intel DUAL CORE 1.6ghz RAM: 2gB Kingston 800 GRAPHICS: Nvidia 9400GT MOBO: ASUS P5kPL-AM EPU HardDrive- S-ATA 80gb Western DIGITALill wont get pass the apple wheel with the square error sign. please help me Link to comment Share on other sites More sharing options...
hellguy Posted December 10, 2010 Share Posted December 10, 2010 WARNING: I've found a driver for realtek 8111 for 64 bits!! go to the bottom of this post for more info Hello. This is japogiii, and this is my first post here. This is my guide into getting a PERFECT HACKINTOSH working on an ASUS P5KPL-AM/PS motherboard. (G31+ICH7 chipset) PERFECT HACKINTOSH means that everything works, including USB, sound, video with QE/CI enabled, sleep, restart, and shutdown. I have spent almost three days without sleep trying to get this thing to work, and the final result is that it works just as Steve Jobs would have intended. Here are the important parts which I used for this computer: Processor: Pentium Dual Core e5200 (2 cores @ 2.5 ghz each) Motherboard: ASUS P5KPL-AM/PS Hard Drive: 80 GB Samsung (IDE) 500 GB Seagate (SATA) DVD Drive: LG Internal Super Multi DVD Rewriter 22x (SATA) RAM: 2 GB Kingston Value Ram 800mhz DDR2 Graphics Card: Sparkle 9600GT 512mb PCI-E Install method is through iDeneb v1.4 (10.5.6) BIOS Settings Here are the BIOS settings I used for the P5KPL-AM/PS motherboard. BIOS settings are important to get full sleep, shutdown and restart working. Primary IDE Master: 80 GB Samsung SATA: 500 GB Seagate SATA2: LG DVD ATA/IDE Config: Enhanced Enhanced Mode Support On: S-ATA Onboard PCIE GbE LAN: Disabled (I disabled the onboard LAN because I use a Netgear Wireless USB anyway.) Plug and Play O/S: Yes Suspend Mode: S3 Only ACPI 2.0 Support: Enabled Restore on AC Power Loss: Power Off Boot Device Priority 1st: HDD Samsung 2nd: DVD LG Partitioning the Drive and Dualbooting with XP Refer to this guide http://wiki.osx86project.org/wiki/index.ph...DualBoot_10.5.2 BUT INSTEAD of Kalyway 10.5.2, substitute it with iDeneb v1.4. You know where to find it. Customize the installation, and check these boxes for this particular setup: ICHX support (because this P5KPL-AM/PS is a G31/ICH7 chipset) nvDarwin 512 mb (for the 9600GT videocard) I didn't check anything for sound, because this is going to be patched later on. Install. Then it will reboot. Follow the rest of the instructions on http://wiki.osx86project.org/wiki/index.ph...DualBoot_10.5.2 for bootloading. If you did everything correctly, boot into the OS X partition and you should see the welcome video. (Nice, eh. QE/CI enabled already) but no sound. Get the sound drivers here, and install: http://www.kexts.com/index.php?controller=...ext=5&kid=7 Last, go to system preferences -> energy saver. Under options, check "Allow power button to sleep the computer." Also check "Restart automatically after a power failure." And there you go. A fully working, 10.5.6 OS X Leopard on your HACKINTOSH. Enjoy. Please comment if you encounter any problems, or if this guide has helped you in any way. japogiii. Now you can! 8111 http://www.kexts.com/view/133-realtek_r100...4_bit!.html And for the nvidia users that want to use everything in 64 bits look for nvenabler 64 on kexts.com Azalia audio works ok on 64bits, just remove the "i386" or something like that in com.apple.boot.plist and be happy! Link to comment Share on other sites More sharing options...
Flyermac Posted January 6, 2011 Share Posted January 6, 2011 Hello All! This is right my board (P5KPL-AM), but I'd like to know if the processor (E1500 - the first Celeron Dual Core) can deal with OS X since that it seems it doesn't have virtualization resources. Please help me. My board has 4 GB DDR-2 800 Mhz and a Samsung 250 GB 7200 rpm HD. Link to comment Share on other sites More sharing options...
Halo_Mac Posted April 4, 2011 Share Posted April 4, 2011 ;) I dont know if anybody is going to reply to this post. But I am havin problem installing hackintosh on my asus P5KPL-AM/PS started without external graphics card. Is there any way to get it installed without installing external PCi-E card??? Please help if possible.. thank you!! Link to comment Share on other sites More sharing options...
Luiz Murillo Posted April 4, 2011 Share Posted April 4, 2011 ;) I dont know if anybody is going to reply to this post. But I am havin problem installing hackintosh on my asus P5KPL-AM/PS started without external graphics card. Is there any way to get it installed without installing external PCi-E card??? Please help if possible.. thank you!! I cant say it is impossible, but use it for 2 years and never heard a way to use onboard. Get a cheap 9400GT/9500GT/9600GT, you'll pay minimal cash and get an amazing machine. Link to comment Share on other sites More sharing options...
GEN3SIS Posted July 9, 2011 Share Posted July 9, 2011 i have P5KL-AM , currently trying to install iatkos 10.6.6 but it just hangs on grey apple screen before it even gets to the installation process. any help guys? thanks in advance Link to comment Share on other sites More sharing options...
Recommended Posts