kuntz Posted April 25, 2006 Share Posted April 25, 2006 Hi to all, this is my first 3d in this forum, i hope you can help me to solve my iusses with x86 tiger. I installed first time 10.4.6 version on pc in signature, i checked Amd Base, Amd SSE2, Amd SSE3, v1.2 AMD Decrypt and 10.4.6 update from Jas install dvd. After installation (very slow) i repaired permission, restarted, mount -a, monted in write mode and re-appling the amd_enabler i got this error message: "cannot read references bytes from patch description file cpuid_patches.txt!". I tested my hd speed and it's 1.5Mb/sec on write (very slow). Someone can help me to find solution. I tried all this night to find solution on this forum but all i tried didn't work!!!! Audio (ALC882D HD) didn't work. I am not an expert user of Mac, i already have a iBookG4 but i never used the terminal to work with my MAC!! Thank you for help!!!!!! I'm ready to work!!!! Link to comment Share on other sites More sharing options...
kuntz Posted April 26, 2006 Author Share Posted April 26, 2006 This is my result with XBench: Results 20.21 System Info Xbench Version 1.2 System Version 10.4.6 (8I1119) Physical RAM 1024 MB Model ADP2,1 Drive Type Maxtor 6Y080L0 CPU Test 71.98 GCD Loop 123.67 6.52 Mops/sec Floating Point Basic 73.61 1.75 Gflop/sec vecLib FFT 45.94 1.52 Gflop/sec Floating Point Library 82.43 14.35 Mops/sec Thread Test 71.63 Computation 48.11 974.57 Kops/sec, 4 threads Lock Contention 140.15 6.03 Mlocks/sec, 4 threads Memory Test 129.80 System 118.62 Allocate 123.66 454.12 Kalloc/sec Fill 110.12 5354.17 MB/sec Copy 123.10 2542.56 MB/sec Stream 143.31 Copy 140.93 2910.94 MB/sec Scale 131.54 2717.62 MB/sec Add 151.97 3237.33 MB/sec Triad 150.75 3224.94 MB/sec Quartz Graphics Test 88.08 Line 69.71 4.64 Klines/sec [50% alpha] Rectangle 87.71 26.19 Krects/sec [50% alpha] Circle 84.19 6.86 Kcircles/sec [50% alpha] Bezier 94.63 2.39 Kbeziers/sec [50% alpha] Text 116.64 7.30 Kchars/sec OpenGL Graphics Test 13.13 Spinning Squares 13.13 16.65 frames/sec User Interface Test 106.47 Elements 106.47 488.63 refresh/sec Disk Test 4.68 Sequential 3.11 Uncached Write 2.56 1.57 MB/sec [4K blocks] Uncached Write 2.69 1.52 MB/sec [256K blocks] Uncached Read 5.11 1.49 MB/sec [4K blocks] Uncached Read 3.04 1.53 MB/sec [256K blocks] Random 9.42 Uncached Write 13.53 1.43 MB/sec [4K blocks] Uncached Write 4.79 1.53 MB/sec [256K blocks] Uncached Read 60.97 0.43 MB/sec [4K blocks] Uncached Read 7.96 1.48 MB/sec [256K blocks] Ide test is bad but other tests is good!..right??..what do you think about? IDE channel are made by Uli1575 (here) thank you Link to comment Share on other sites More sharing options...
boo50 Posted April 28, 2006 Share Posted April 28, 2006 first you need Jas ppf patch for Jas 10.4.6 DVD/ patch the DVD iso, then burn in. When you install, you must choose only SSE 2 or 3 (what your processor support) NOT BOTH and Ati X200 patches/ you can download CPUZ for WIN and there you will see what functions your processor supports. Link to comment Share on other sites More sharing options...
kuntz Posted April 28, 2006 Author Share Posted April 28, 2006 i installed from Jas DVD 10.4.6...so i need another patch? i'm searching on PirBay...i found anything else!! can you send me a PM with right file? Thank you guy!!! Link to comment Share on other sites More sharing options...
kuntz Posted May 1, 2006 Author Share Posted May 1, 2006 finnally i found the right name of my ide controller: it's ALi Corporation M5229 IDE. i found some posts in this forum with the same ide controller but i did not undestand if it works good to others! thank you guys!! Link to comment Share on other sites More sharing options...
Harlock Posted May 3, 2006 Share Posted May 3, 2006 Sorry to say that, but as long as I know, ULi chipsets are hopeless. There is no kext (driver) for them. And, being a "rare" chipset, very little effort is going into them. Intel-Via-Nforce is what's all about. If you've got an AMD socket 939 you can try the board A8V-VM from Asus. Link to comment Share on other sites More sharing options...
kuntz Posted May 3, 2006 Author Share Posted May 3, 2006 this is a very bad news...i hope someone do something for this chipset... i can't change my MBoard, i need a spdif output with DDLive! and i found only this one that do this! thank you! Link to comment Share on other sites More sharing options...
Black Knight Posted May 30, 2006 Share Posted May 30, 2006 I've got an Asus A8R-MVP with the ULI 1575 southbridge and I have SATA working. What X200 patches are you referring to? Link to comment Share on other sites More sharing options...
kuntz Posted May 31, 2006 Author Share Posted May 31, 2006 I've got an Asus A8R-MVP with the ULI 1575 southbridge and I have SATA working. What X200 patches are you referring to? sounds good!!! can you tell me about your installation??! thank you ps. i can't see SATA disks when i install OSX! Link to comment Share on other sites More sharing options...
Black Knight Posted May 31, 2006 Share Posted May 31, 2006 sounds good!!! can you tell me about your installation??! thank you ps. i can't see SATA disks when i install OSX! You need to add 0x528810B9 to the PCIMatch section of AppleVIAATA.kext/Contents/Info.plist. That's it. Problem is that I can't figure out how to add this file to an install DVD so I can install it to SATA native. I have to use VMWare to install it, edit the kext, then reboot in native. If someone could shed some light on that, I'd really appreciate it. I have read the many topics on how to create an extensions.mkext file, but when I do that it says the archive would be too large and quits. The command I ran is "kextcache -m /extensions.mkext /system/library/extensions/". Anyways, that device id should get you SATA compatibility. Oh, yeah, you can't use AHCI mode, you need to use emulated PATA. I think it only works at SATAI speeds, but hey, it's still fast. Good luck. Link to comment Share on other sites More sharing options...
kuntz Posted June 1, 2006 Author Share Posted June 1, 2006 yeahhhh, it works!!!! i installed osx86 on ide device (Maxtor 80Gb) the hardware ID is 0x522910B9. I added this one and the ID you sended me and now i can see NTFS win partitions on a SATA Hd installed also!! Now i have 1 little problem: i need to delete extentions.kextcache and .mkext before restart the system, if i don't do this after restart my ide HD is slow again!!! do you know what i can do to fix??? thank you guy!!!! Link to comment Share on other sites More sharing options...
Black Knight Posted June 1, 2006 Share Posted June 1, 2006 If you mean you have to do that before every restart, then you need to boot up OSX, delete both files, then run this command (without the quotes) "kextcache -l -m Extensions.mkext /system/library/extensions/" which will create a new Extensions.mkext which will have the SATA working. Then anytime you add a kext or whatever, only delete the Extensions.kextcache file and leave the mkext file, unless you want to run that command again. I don't know why this happens, but I fixed it ultimately by doing a new install of OSX and then editing the file again. Link to comment Share on other sites More sharing options...
kuntz Posted June 1, 2006 Author Share Posted June 1, 2006 warning: kernel extension /system/library/extensions/AppleGPIO.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere)warning: kernel extension /system/library/extensions/AppleHWClock.kext/Contents/PlugIns/AppleEMacClock.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/AppleHWClock.kext/Contents/PlugIns/ApplePulsar.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/AppleK2.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/AppleKeyLargo.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) kernel extension /system/library/extensions/AppleOnboardPCATA.kext is not authentic (check ownership and permissions); skipping it and any plugins warning: kernel extension /system/library/extensions/IOI2CControllerPMU.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/IOI2CControllerPPC.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/IOI2CControllerSMU.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/IOI2CDriveBayGPIO.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/IOI2CFamily.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/IOI2CMotionSensor.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) warning: kernel extension /system/library/extensions/IOI2CPulsar.kext is missing dependencies (including in cache anyway; dependencies may be available from elsewhere) no file made after command!...i tried to use "sudo repairpermissions /system/library" but nothing change thank you ps. i have alc882 sound system, win give me this "func_01&ven_10EC&dev_0882". do you know what i need to change in azalia kext??? Link to comment Share on other sites More sharing options...
Black Knight Posted June 1, 2006 Share Posted June 1, 2006 Ok, those warnings are normal, but I think I might have needed to make the command be "sudo kextcache -l -m /system/library/Extensions.mkext /system/library/extensions" Also, when you repair permissions, you should just run diskutility. If you want to do the command line alternative, it is "diskutil repairpermissions /" As far as the Azalia kext, you need to go to AppleAzaliaAudio.kext/Contents/Plugins/AzaliaController.kext/Contents/ or something like that and add your device id to the info.plist there. In your case, it should be 0x088210EC. I don't know if that will work or not for your chip since mine is an AD1986a chip which is a bit different. Good luck though. Link to comment Share on other sites More sharing options...
kuntz Posted June 2, 2006 Author Share Posted June 2, 2006 it doesn't work but i hope in a next release of iso that include this patch!! now my audio doesn't work, i'll try in future!! very thanks for your help!!!!! Ciao Link to comment Share on other sites More sharing options...
raddy Posted June 14, 2006 Share Posted June 14, 2006 You need to add 0x528810B9 to the PCIMatch section of AppleVIAATA.kext/Contents/Info.plist. That's it. Problem is that I can't figure out how to add this file to an install DVD so I can install it to SATA native. I have to use VMWare to install it, edit the kext, then reboot in native. If someone could shed some light on that, I'd really appreciate it. I have read the many topics on how to create an extensions.mkext file, but when I do that it says the archive would be too large and quits. The command I ran is "kextcache -m /extensions.mkext /system/library/extensions/". Anyways, that device id should get you SATA compatibility. Oh, yeah, you can't use AHCI mode, you need to use emulated PATA. I think it only works at SATAI speeds, but hey, it's still fast. Good luck. Hi I have as Asus P5RD2-VM Motherboard, i used deadmoo's OSX 10.6 disk image to image a partition, now as expected i got the waiting for the boot device error, i used MacDrive from Windows to edit AppleVIAATA.kext/Contents/Info.plist file, but i can't find the "PCIMatch" section in that file, how do i find a device id for a device, i am currently using windows xp, please help, Link to comment Share on other sites More sharing options...
MrBryan Posted July 7, 2006 Share Posted July 7, 2006 I also have P5RD2-VM, which has the m1575 chipset mentioned above, PATA device ID 0x522910B9. I tried adding it to AppleVIAATA.kext/Contents/Info.plist as mentioned below, and the system boot fails, giving some message about ATA device blocked or something, then "still waiting for root". Before editing, it booted but gave me 1MB/s transfers. I'm trying to use the PATA only. Any ideas why this isn't working for me? I'm using JAS 10.4.6 Thanks kindly, Bryan Hi I have as Asus P5RD2-VM Motherboard, i used deadmoo's OSX 10.6 disk image to image a partition, now as expected i got the waiting for the boot device error, i used MacDrive from Windows to edit AppleVIAATA.kext/Contents/Info.plist file, but i can't find the "PCIMatch" section in that file, how do i find a device id for a device, i am currently using windows xp, please help, Link to comment Share on other sites More sharing options...
g33 Posted July 7, 2008 Share Posted July 7, 2008 i have this chipset too. got it working by adding 0x522910b9 to SATA section of appleviaata.kext the deleting applegenericpcata.kext from ioatafamily in plugins. rm extensions.mkext reboot : done. it reverts to slow because it uses the {censored} applegenericpcata ...... so remove it and it'll be always fast! Link to comment Share on other sites More sharing options...
Recommended Posts