Mr G87 Posted August 19, 2009 Share Posted August 19, 2009 Per caso con le ultime versioni di leo le potre usb integrate della mobo funzionano? Link to comment Share on other sites More sharing options...
guslimousin Posted August 21, 2009 Share Posted August 21, 2009 Sorry, but I don't speak italian, Only english or spanish. ------------------------------------------------ english version ------------------------------------------------ Hello: I have a motherboard ASRock G31M-S and I can't get toinstall osX, I try almost every installer that exist over there, iatkos, leo4all, kalyway, ipc... Can you helpme with this?? this is my hardware: motherboard:ASRock G31M-S CPU: intel quad core Q8200 HDD sata500GB(with windows) DVD recorder LG sata Hdd 80 gb pata(not sata) - where I want to install "mac OS X" Waiting for your help, thank you in advance. Greetings from SouthAmerica ------------------------------------------------ version en español ------------------------------------------------ Hola: Tengo una placa madre ASRock G31M-S y no he puedo conseguir instalar osX, ya he probado com casi todos los instaladores que existen por ahi, iatkos, leo4all, kalyway, ipc... Me podrias ayudar con esto?? este es mi hardware: motherboard:ASRock G31M-S Procesador: intel quad core Q8200 disco duro sata500gb(tiene windows) Grabadora LG sata Disco duro 80 gb pata(no es sata) - donde quiero instalar el "mac OS X" Desde ya, muchas gracias, y quedo aguardando tu ayuda Saludos desde sudamérica Link to comment Share on other sites More sharing options...
Giorgio_multi Posted August 23, 2009 Author Share Posted August 23, 2009 Sorry, but I don't speak italian, Only english or spanish.------------------------------------------------ english version ------------------------------------------------ Hello: I have a motherboard ASRock G31M-S and I can't get toinstall osX, I try almost every installer that exist over there, iatkos, leo4all, kalyway, ipc... Can you helpme with this?? this is my hardware: motherboard:ASRock G31M-S CPU: intel quad core Q8200 HDD sata500GB(with windows) DVD recorder LG sata Hdd 80 gb pata(not sata) - where I want to install "mac OS X" Waiting for your help, thank you in advance. Greetings from SouthAmerica ------------------------------------------------ version en español ------------------------------------------------ Hola: Tengo una placa madre ASRock G31M-S y no he puedo conseguir instalar osX, ya he probado com casi todos los instaladores que existen por ahi, iatkos, leo4all, kalyway, ipc... Me podrias ayudar con esto?? este es mi hardware: motherboard:ASRock G31M-S Procesador: intel quad core Q8200 disco duro sata500gb(tiene windows) Grabadora LG sata Disco duro 80 gb pata(no es sata) - donde quiero instalar el "mac OS X" Desde ya, muchas gracias, y quedo aguardando tu ayuda Saludos desde sudamérica I have translate the guide in english, look at the post #1. Giorgio Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted August 31, 2009 Share Posted August 31, 2009 Ciao Giorgio Posso parlare un può d'Italiano, ma penso che posso parlare megliore in Inglese, perche sono canadese I have a Asrock G31M-S and I flashed it with your bios update, followed all instructions exactly, however I'm still only getting "Reboot and select proper boot device" right after i tell it to boot from the DVD. I have the following specs and I've tried several distros burning them using leopard on a separate computer. Intel QuadCore @ 2.66ghz 4gb ram nVidia 9600GT 1GB PCI-E (sata) 1TB harddrive (sata) Please get back to me as soon as you can Ciao e Grazie Molto Link to comment Share on other sites More sharing options...
Giorgio_multi Posted August 31, 2009 Author Share Posted August 31, 2009 Ciao Giorgio Posso parlare un può d'Italiano, ma penso che posso parlare megliore in Inglese, perche sono canadese I have a Asrock G31M-S and I flashed it with your bios update, followed all instructions exactly, however I'm still only getting "Reboot and select proper boot device" right after i tell it to boot from the DVD. I have the following specs and I've tried several distros burning them using leopard on a separate computer. Intel QuadCore @ 2.66ghz 4gb ram nVidia 9600GT 1GB PCI-E (sata) 1TB harddrive (sata) Please get back to me as soon as you can Ciao e Grazie Molto Perups is a problem of Speed DVD recording. Try to write the DVD with the slowest choice of your burning program. (Have you a SATA HD?) Giorgio Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted August 31, 2009 Share Posted August 31, 2009 Perups is a problem of Speed DVD recording. Try to write the DVD with the slowest choice of your burning program. (Have you a SATA HD?) Giorgio yes i do its a seagate 1tb one... im writing iatkos to usb right now and im gonna try an install from there, but i dont understand whats wrong, my other computer works perfectly. And i've tried booting a windows 7 install disk and that works perfect... :/ I'll see what happens and let you know. Thanks for the help Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted August 31, 2009 Share Posted August 31, 2009 yea its not working idk what to do Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted September 2, 2009 Share Posted September 2, 2009 Perups is a problem of Speed DVD recording. Try to write the DVD with the slowest choice of your burning program. (Have you a SATA HD?) Giorgio just as an update, i did have a bad image, but now im getting lots of problems... I tried kalyway 10.5.2 with the vanilla kernel, but that just freezes at "NTFS Volume Name..." after the install I then tried iAtk0s v7, but that just kernel panics no matter what kernel I try (the dvd won't even boot) Care to shed any light? or tell me how to install snow leopard? Here use the files in the zip i provided, whether you're x32 or x64 pick the appropriate folder and run afuwin.exe inside it (from inside windows that is). Then check off the following boxes: "Program All Blocks" "Destroy CMOS Checksum" "Do Not Check ROM ID" "Restart after programming" When you restart you should hear 2 beeps or see something like press F2 to configure cmos/bios. Then apply the appropriate settings. However in my case, I still can't install OS X, it just freezes :/ afuwin.zip Link to comment Share on other sites More sharing options...
Giorgio_multi Posted September 2, 2009 Author Share Posted September 2, 2009 just as an update, i did have a bad image, but now im getting lots of problems... I tried kalyway 10.5.2 with the vanilla kernel, but that just freezes at "NTFS Volume Name..." after the install I then tried iAtk0s v7, but that just kernel panics no matter what kernel I try (the dvd won't even boot) Care to shed any light? or tell me how to install snow leopard? Here use the files in the zip i provided, whether you're x32 or x64 pick the appropriate folder and run afuwin.exe inside it (from inside windows that is). Then check off the following boxes: "Program All Blocks" "Destroy CMOS Checksum" "Do Not Check ROM ID" "Restart after programming" When you restart you should hear 2 beeps or see something like press F2 to configure cmos/bios. Then apply the appropriate settings. However in my case, I still can't install OS X, it just freezes :/ It is safety to flash the BIOS trough DOS with afudos and a floppy or a usb stick with DOS. Flashing by windows is dangerous. Giorgio Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted September 2, 2009 Share Posted September 2, 2009 haven't had any problems yet....stupid snow leopard, won't boot Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted September 5, 2009 Share Posted September 5, 2009 just as an update, ideneb 1.4 works like a charm!!!!!!! now updating to 10.5.7, im scared of 10.5.8 Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted September 15, 2009 Share Posted September 15, 2009 It is safety to flash the BIOS trough DOS with afudos and a floppy or a usb stick with DOS. Flashing by windows is dangerous. Giorgio hey georgio where did you get that bios mod, because I'd like one for 1.8 please, 1.8 supports Intel Virtualization Technology which is what I need for parallels Link to comment Share on other sites More sharing options...
Giorgio_multi Posted September 16, 2009 Author Share Posted September 16, 2009 hey georgio where did you get that bios mod, because I'd like one for 1.8 please, 1.8 supports Intel Virtualization Technology which is what I need for parallels There is not a 1.8 modified BIOS for G31-M S and G31-M GS. Supports Your CPU Intel Virtualization Technology? Giorgio Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted September 16, 2009 Share Posted September 16, 2009 There is not a 1.8 modified BIOS for G31-M S and G31-M GS. Supports Your CPU Intel Virtualization Technology? Giorgio yes it should, i have everything running vanilla on Snow Leopard with an intel core 2 quad @ 2.66ghz, however I don't see any options in my bios to set virtualization technology :/ Link to comment Share on other sites More sharing options...
Giorgio_multi Posted September 16, 2009 Author Share Posted September 16, 2009 yes it should, i have everything running vanilla on Snow Leopard with an intel core 2 quad @ 2.66ghz, however I don't see any options in my bios to set virtualization technology :/ What model of CPU? Giorgio Link to comment Share on other sites More sharing options...
fyrekrig Posted September 17, 2009 Share Posted September 17, 2009 Thanks for a great guide. Used iDeneb 10.5.7 with the patched bios on my Asrock G31-M GS rev1.1 Everything works Nvidia GF 7100gs, Onboard LAN and Audio (WoodoHDA) but I can not boot without iDeneb DVD loaded in tray, if I take away the DVD I only have a small cursor blinking. What do I do to correct this problem? Link to comment Share on other sites More sharing options...
Giorgio_multi Posted September 17, 2009 Author Share Posted September 17, 2009 Thanks for a great guide. Used iDeneb 10.5.7 with the patched bios on my Asrock G31-M GS rev1.1 Everything works Nvidia GF 7100gs, Onboard LAN and Audio (WoodoHDA) but I can not boot without iDeneb DVD loaded in tray, if I take away the DVD I only have a small cursor blinking. What do I do to correct this problem? Install Chameleon 2.0 RC3 Giorgio Link to comment Share on other sites More sharing options...
oldinsanelymacuser32 Posted September 17, 2009 Share Posted September 17, 2009 What model of CPU? Giorgio Core 2 Quad Q8200 Link to comment Share on other sites More sharing options...
Giorgio_multi Posted September 18, 2009 Author Share Posted September 18, 2009 Core 2 Quad Q8200 Core 2 Quad Q8200 doesn't support Intel Virtualization Technology (is your CPU, not the motherboard that doesn't support this technology) http://processorfinder.intel.com/details.aspx?sSpec=SLB5M I'm sorry, Giorgio Link to comment Share on other sites More sharing options...
xcer Posted September 22, 2009 Share Posted September 22, 2009 Hello everyone, I have iDeneb 10.5.6 my pc Core 2 Duo Asrock G31M-S 2gb 800 Geforce XFX 8600GT 256mb DDR3 Error is READ or WRITE failed, SENSE_KEY = 0x03, ... What is error??????????????????????? Link to comment Share on other sites More sharing options...
Giorgio_multi Posted September 22, 2009 Author Share Posted September 22, 2009 Hello everyone,I have iDeneb 10.5.6 my pc Core 2 Duo Asrock G31M-S 2gb 800 Geforce XFX 8600GT 256mb DDR3 Error is READ or WRITE failed, SENSE_KEY = 0x03, ... What is error??????????????????????? With DVD? Giorgio Link to comment Share on other sites More sharing options...
cobrama Posted September 22, 2009 Share Posted September 22, 2009 scusate ma dove posso trovare il voodoohda With voodooHDA.kext 0.2.1 you can obtain audio in and out, not only audio out as with Azalia. Thanks for your contribute. Ciao, Giorgio anzi penso di averli trovati ma non cambia nulla il mic non funziona forse devo cancellare azalia ? come lo installo corretamente il voodoohda ? funziona tutto su asrock g31m s apparte il mic ( appledecript non l'ho tolto quello che c'era perche' con quello scaricato non mi si avvia, forse sbaglio qualcosa nell'istallazione dei kexts) cosa succede se tengo il vecchio 'decript' (appledecript)? grazie Giorgio per l'ottima guida, anche un impedito come me è riuscito comunque a far girare X Link to comment Share on other sites More sharing options...
Giorgio_multi Posted September 23, 2009 Author Share Posted September 23, 2009 scusate ma dove posso trovare il voodoohda anzi penso di averli trovati ma non cambia nulla il mic non funziona forse devo cancellare azalia ? come lo installo corretamente il voodoohda ? funziona tutto su asrock g31m s apparte il mic ( appledecript non l'ho tolto quello che c'era perche' con quello scaricato non mi si avvia, forse sbaglio qualcosa nell'istallazione dei kexts) cosa succede se tengo il vecchio 'decript' (appledecript)? grazie Giorgio per l'ottima guida, anche un impedito come me è riuscito comunque a far girare X Azalia va eliminato come pure ACLinject.kext e HDAEnabler.kext (se ci sono). VoodooHDA.kext deve essere la versione 0.2.1 perchè la 0.2.2 non fa funzionare il mic. Col vecchio Appledecrypt non succede nulla, rallenta solo leggermente i tempi di caricamento del sistema. Giorgio Link to comment Share on other sites More sharing options...
cobrama Posted September 23, 2009 Share Posted September 23, 2009 grazie Giorgio, appena torno a casa provo subito franz Link to comment Share on other sites More sharing options...
xcer Posted September 24, 2009 Share Posted September 24, 2009 Hey guys iDeneb 10.5.6 v1.4 installed my pc but restart with error (using 10485 buffer headers and 4096 cluster IO buffer headers) HELP ME!!!!! My pc Core 2 Duo E4500 2.20Ghz Asrcock G31m-S 2Gb 800 ram DVDRW Sata 2tb sata hard PS Keyboard USB Mouse Link to comment Share on other sites More sharing options...
Recommended Posts