m.musashi Posted December 1, 2007 Author Share Posted December 1, 2007 5onlt: 0x50051799, but why do u ask? the driver loads therefore the ids are correctly entered = no need to modify. The error means that the output queue is full and the system stalled. Most likely there's a problem with IONetworkingFamily. Without access to the machine I cannot do anything more, but I'm inclined to believe that there's something wrongly setup in your system ... 30K+ downloads and 99.9% of people managed to get online so there's a good chance the driver actually works b2unit: maybe I wasn't clear enough. Jumbo frames have nothing to do with your network not working. Plus, do you run a server? if the answer is no then you don't need jumbos. Link to comment Share on other sites More sharing options...
5onIt Posted December 2, 2007 Share Posted December 2, 2007 OK - I booted from a clean install of OS 10.4.11. Haven't modified IONetworkingFamily at all. In fact, I haven't even touched that directory. Intalled the skge driver and still the same error. Only thing I can think of is that Belkin must not be following standards and is doing some kind of "vodoo" with this card, and therefore your driver won't work. I'll keep trying a few things here and there, but for now it looks like your driver won't work with this card. It's *slightly* possible that the card is damaged, but it works just fine in my RedHat box when I load the driver from the Belkin CD. Link to comment Share on other sites More sharing options...
b2unit Posted December 3, 2007 Share Posted December 3, 2007 5onlt: 0x50051799, but why do u ask? the driver loads therefore the ids are correctly entered = no need to modify. The error means that the output queue is full and the system stalled. Most likely there's a problem with IONetworkingFamily. Without access to the machine I cannot do anything more, but I'm inclined to believe that there's something wrongly setup in your system ... 30K+ downloads and 99.9% of people managed to get online so there's a good chance the driver actually works b2unit: maybe I wasn't clear enough. Jumbo frames have nothing to do with your network not working. Plus, do you run a server? if the answer is no then you don't need jumbos. I think your 2e_u version made big progress because DGE530T was recognized by G4/450 through your latest driver. it wasn't before. I don't know well about programming .kext file but I think it's very tiny problem even though can't be found easily and it could be fixed swiftly. I'm using g4/450 as my personal server so I need a gigabit NIC & Jumbo frame. if you have a time please keep going for the people like me. thanks M. Link to comment Share on other sites More sharing options...
felikz Posted December 4, 2007 Share Posted December 4, 2007 great!!! thanks (p4c800-deluxe)! Link to comment Share on other sites More sharing options...
MichielM Posted December 17, 2007 Share Posted December 17, 2007 I've a Marvell 8001 NIC (on an Asus P5B-V) and I use the Leopard build of your skge.kext. Every time I boot my PC I get a kernel panic from skge.kext (1 in 2 boots, the next time it boots is does work). Could you explain this why it doesn't work the first time and does work the second time ? Link to comment Share on other sites More sharing options...
carlomascherini76 Posted December 19, 2007 Share Posted December 19, 2007 THANKS!!! IT Works on my ASUS P4C800. Perfect! Link to comment Share on other sites More sharing options...
helob Posted December 20, 2007 Share Posted December 20, 2007 in this case you haven't loaded the driver correctly or set the pid/vid in info.plist. Download 0.2e and try again Hi musashi, Thanks for skge (0.2e) driver. It's working on my newly Leopard install Toh RC2 10.5.0 with onboard Marvell Yukon 8001 on Asus P4P800SE P4 3.0G SSE3/ATIX1600Pro system. I followed your instruction of installing skge in /System/Library/Extensions/ However I read somewhere that skge can be install in /System/Library/Extensions/IONetworkingFamily/Contents/Plugins/ I tried and it works too. Questions: 1. Which is the better way and why? 2. For Leopard, whchich is better skge(0.2e) or skge(0.2e)U? I asked because I am encountering some time and screen saver problems. Thank you for your time. Link to comment Share on other sites More sharing options...
Filip100 Posted December 24, 2007 Share Posted December 24, 2007 i have iatkos leoaprd and ethernet card DGE-530T. I install skge e. i can see ethenrnet but it is allways disconected, i cant connect on my network. when i sudo dmesg a cant find messages with skgeosx where is problem??? problem fixed Link to comment Share on other sites More sharing options...
jotunloki Posted December 30, 2007 Share Posted December 30, 2007 Hey just wanted to say thanks for your good work. Fixed my last problem with 10.5.1 and works perfectly. Link to comment Share on other sites More sharing options...
GingerTea Posted December 30, 2007 Share Posted December 30, 2007 Works like a charm. Link to comment Share on other sites More sharing options...
Unisex Posted January 4, 2008 Share Posted January 4, 2008 it works so great for me and my LEOPARD. nice work. Link to comment Share on other sites More sharing options...
felikz Posted January 13, 2008 Share Posted January 13, 2008 For p4c800-deluxe working skge.kext (for kissin)! skge.kext.zip Link to comment Share on other sites More sharing options...
BartAfterDark Posted January 15, 2008 Share Posted January 15, 2008 Sorry if this may sound stupid. But how do I edit the info.plist :S - 3COM 3C940 / ASUS P4P800 Deluxe: edit info.plist and replace 0x432011AB with 0x170010B7 before following installation instructions Link to comment Share on other sites More sharing options...
R.Rendall Posted January 17, 2008 Share Posted January 17, 2008 Absolutely brilliant. I've been struggling with this problem ever since I installed Mac OSX on my PC about 3 weeks ago. Now my internet is working thank to you. BTW, I've never touched a MAC till this install but found your install instructions very simple to follow. Hard part was finding "Termina" :-) Once again, thank you very much. Now for my crappy Radeon 9200 video. Link to comment Share on other sites More sharing options...
brentcophotography Posted January 17, 2008 Share Posted January 17, 2008 OK, on a whim I reversed the hex codes and entered this instead 0x50051799. The extension now seems to be recognised, but when it boots to the desktop I get this error: System extension cannot be used The system extension "/System/Library/Extensions/skge.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update. So I reinstalled per the instructions on your initial post. Same error. I'm getting the same error on a Leopard OS. How do you make this work? Link to comment Share on other sites More sharing options...
GERGÖ Posted January 17, 2008 Share Posted January 17, 2008 Maybe u didn't repair permissions correctly. Use the kext helper. Kext_Helper_b7.zip Link to comment Share on other sites More sharing options...
Dude_SJ Posted January 23, 2008 Share Posted January 23, 2008 For p4c800-deluxe working skge.kext (for kissin)!Attached File(s) Attached File skge.kext.zip ( 45.56K ) Number of downloads: 13 Well, Mine P4C800 Deluxe doesn't work.. It says that the Driver was improperly installed so it wouldn' be used.. =( Pleasee help me.... Link to comment Share on other sites More sharing options...
GERGÖ Posted January 23, 2008 Share Posted January 23, 2008 Delete the kext from the extensions..... dir. And use the kexthelper(in the 2nd post above) to install it! Link to comment Share on other sites More sharing options...
Dude_SJ Posted January 24, 2008 Share Posted January 24, 2008 Thank you man!! Nice Application!! Worked perfectly!!! =D P4C800 Deluxe working nicely Link to comment Share on other sites More sharing options...
guardian_10 Posted January 29, 2008 Share Posted January 29, 2008 Help!!! Please tell me what am I doing wrong? I tried installing the kext file, but with every file, I am getting the same error "Permission denied" I have the "Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller" I downloaded skge.kext to my root folder of the disk, opened Terminal and typed the following: {user}s-ACPI:~ {user}$ sudo -s {password} {user}s-ACPI:~ {user}$ cp -R /skge.kext /System/Library/Extensions cp: /System/Library/Extensions/skge.kext: Permission denied cp: /skge.kext: unable to copy extended attributes to /System/Library/Extensions/skge.kext: Permission denied cp: /System/Library/Extensions/skge.kext/Contents: No such file or directory cp: /skge.kext/Contents: unable to copy extended attributes to /System/Library/Extensions/skge.kext/Contents: No such file or directory cp: /System/Library/Extensions/skge.kext/Contents/MacOS: No such file or directory cp: /skge.kext/Contents/MacOS: unable to copy extended attributes to /System/Library/Extensions/skge.kext/Contents/MacOS: No such file or directory cp: /System/Library/Extensions/skge.kext/Contents/MacOS/skge: No such file or directory cp: /System/Library/Extensions/skge.kext/Contents/Resources: No such file or directory cp: /skge.kext/Contents/Resources: unable to copy extended attributes to /System/Library/Extensions/skge.kext/Contents/Resources: No such file or directory cp: /System/Library/Extensions/skge.kext/Contents/Resources/English.lproj: No such file or directory cp: /skge.kext/Contents/Resources/English.lproj: unable to copy extended attributes to /System/Library/Extensions/skge.kext/Contents/Resources/English.lproj: No such file or directory cp: /System/Library/Extensions/skge.kext/Contents/Resources/English.lproj/InfoPlist.strings: No such file or directory cp: /System/Library/Extensions/skge.kext/Contents/Info.plist: No such file or directory {user}s-ACPI:~ {user}$ Mac OS X 10.5 (9A581) Darwin 9.0.0 Pentium 4 3.0 GHz (shows up as 3.22GHZ in System Profiler?" 1.5 GB RAM 800 MHz PCIe 128 MB display Link to comment Share on other sites More sharing options...
Macinbest Posted January 30, 2008 Share Posted January 30, 2008 For the D-Link DGE-530T Rev. A1, use the device ID 0x004c0000 It works beautifully so far. Link to comment Share on other sites More sharing options...
guardian_10 Posted January 30, 2008 Share Posted January 30, 2008 Hi, just got the network installed and right now I am posting from my Hackintosh. Link to comment Share on other sites More sharing options...
GERGÖ Posted January 30, 2008 Share Posted January 30, 2008 Hi, just got the network installed and right now I am posting from my Hackintosh. Nice! Next time use kext helper, it's easier. Link to comment Share on other sites More sharing options...
borko Posted January 30, 2008 Share Posted January 30, 2008 Well done! Works on perfectly Leopard on Asus P5GZ-MX ! Thanks! Link to comment Share on other sites More sharing options...
starobrno1 Posted February 1, 2008 Share Posted February 1, 2008 Thanks for the skgekext man, it works. Had to run it twice using the kexthelper, I´m typing this on my kaly 10.5.1 Leo hack. Funny thing is it worked just ok out of the box with kaly 10.4.10. All but onboard sound worked ok. Well sound worked but not good but I´m using a FW soundcard so I did´nt bother to look for a kext for it. No sound on Leo though. My specs are Asus p4p800se Pny Gforce 6200 Pentium P4 clocked to 3,3 Ghz works up to 3,6 but can act a bit strange 3 gig memory using two 1gig and two 0,5 gig 630 W power supply seagate 7200 rpm 160 gig Thanks Link to comment Share on other sites More sharing options...
Recommended Posts