wkearney99 Posted January 25, 2009 Share Posted January 25, 2009 Anyone gotten 10.5.6 working QE/CI with this hardware? I've got an Intel Atom-based D945GCLF motherboard working with an iAtkos built system. I had QE working at one point but fiddled enough with the drivers to make it kernel panic. I only just now resurrected it by using the latest iPC. I got 10.5.6 working with iPC (but no audio yet). Without QE I can't use Front Row, and that's the main point of this box. So, anyone actually have QE fully working in 10.5.6 with this video hardware? Link to comment https://www.insanelymac.com/forum/topic/149129-atom-based-board-0x2772-video-hardware/ Share on other sites More sharing options...
supermx3 Posted January 25, 2009 Share Posted January 25, 2009 look at the dsdt thread below, i used that to make mine work, or you can use the 10.4 framebuffer to get everything working but you will get some artifacing, you need the azalia audio kext to get sound working or just try my dsdt.aml, you will need to install pcefi v9 for this to work DSDT.aml.zip Link to comment https://www.insanelymac.com/forum/topic/149129-atom-based-board-0x2772-video-hardware/#findComment-1055874 Share on other sites More sharing options...
qmafatih Posted April 6, 2009 Share Posted April 6, 2009 Anyone gotten 10.5.6 working QE/CI with this hardware? I've got an Intel Atom-based D945GCLF motherboard working with an iAtkos built system. I had QE working at one point but fiddled enough with the drivers to make it kernel panic. I only just now resurrected it by using the latest iPC. I got 10.5.6 working with iPC (but no audio yet). Without QE I can't use Front Row, and that's the main point of this box. So, anyone actually have QE fully working in 10.5.6 with this video hardware? I install using Mac OS X Install DVD 10.5.6 (Retail). It's working with QE supported, CI Hardware Accelarated since install. No any patch. But cannot change resolution. Only 1024x768. Link to comment https://www.insanelymac.com/forum/topic/149129-atom-based-board-0x2772-video-hardware/#findComment-1125506 Share on other sites More sharing options...
the_WB Posted April 23, 2009 Share Posted April 23, 2009 look at the dsdt thread below, i used that to make mine work, or you can use the 10.4 framebuffer to get everything working but you will get some artifacing, you need the azalia audio kext to get sound working or just try my dsdt.aml, you will need to install pcefi v9 for this to work Thanks! This dsdt.aml enabled all resolutions for me. I'm using retail 10.5.6 with Chameleon 2.0RC1 and Extras in the EFI partition a la Munky. Link to comment https://www.insanelymac.com/forum/topic/149129-atom-based-board-0x2772-video-hardware/#findComment-1140495 Share on other sites More sharing options...
salamanda Posted May 2, 2009 Share Posted May 2, 2009 look at the dsdt thread below, i used that to make mine work, or you can use the 10.4 framebuffer to get everything working but you will get some artifacing, you need the azalia audio kext to get sound working or just try my dsdt.aml, you will need to install pcefi v9 for this to work My issue all working ipc install except cant change from 1024x768 I have installed the dsdt you posted now have ability to change THANKS but now have no sound and when i shut down the pc stays on (fans only) tried to reinstall audio like i did to get it first but not working HELP any sugestions Link to comment https://www.insanelymac.com/forum/topic/149129-atom-based-board-0x2772-video-hardware/#findComment-1146602 Share on other sites More sharing options...
Sylima Posted May 5, 2009 Share Posted May 5, 2009 I have msi wind u-100 (Intel 945+Atom+GMA950). After 10.5.7 (9J56] update i have no QE/CI and have resolution 800x600. Help me plz! DSDT from this topik don`t help me..... Link to comment https://www.insanelymac.com/forum/topic/149129-atom-based-board-0x2772-video-hardware/#findComment-1148955 Share on other sites More sharing options...
Recommended Posts