calleroy Posted October 12, 2006 Share Posted October 12, 2006 Thx is a great job¡¡¡ Works perfect on my Dell Inspiron 640 m ¡,83 Ghz Core Duo Update JaS 10.4.7 Link to comment Share on other sites More sharing options...
Bigomod Posted October 13, 2006 Share Posted October 13, 2006 On acer AWLMi 5672 only 0% Link to comment Share on other sites More sharing options...
mhfs Posted October 17, 2006 Share Posted October 17, 2006 on my toshiba p105-s6024 just 0% too ... any work around it? Link to comment Share on other sites More sharing options...
rokclimbertx Posted October 20, 2006 Share Posted October 20, 2006 no go on my dell inspiron e175 w/10.4.8 JAS... getting the often mentioned "don't have sufficient priviledges" error... that's AFTER authenticating/entering password... tried getting info and changes permission from system to HD name and read/write but no go there either... not familar enuff with terminal commands to try from there without guidance... appreciate the effort though in getting the bundle out to us! Link to comment Share on other sites More sharing options...
Gigahurts Posted October 20, 2006 Share Posted October 20, 2006 no go on my dell inspiron e175 w/10.4.8 JAS... getting the often mentioned "don't have sufficient priviledges" error... that's AFTER authenticating/entering password... tried getting info and changes permission from system to HD name and read/write but no go there either... not familar enuff with terminal commands to try from there without guidance... appreciate the effort though in getting the bundle out to us! I had the same problem (being a newb) for days and finally figured out the solution! Go to utilities - open the netinfo manager - click security - enable root user - put your password in - go to system preferences - go to accounts - go to login options - enter password - disable the automatically login as - Now logout - Login as the root - go to your system configuration folder - drag and drop the powermanagement.bundle onto your desktop, now go to where you have downloaded the powermanagement.bundle you want to install - drag and drop it into the system configuration folder - voila - GETERDONE. You can do that repair permission stuff if you choose, I found it dont make no difference, however. Anyway - Late (you owe me one) (where's the little smilie holding a beer?) (just seems wrong not to have one>) Link to comment Share on other sites More sharing options...
GBK.Xscape Posted October 22, 2006 Share Posted October 22, 2006 doesnt work for me. just stays at calculating. same as all the other power management bundles Link to comment Share on other sites More sharing options...
perfect0 Posted October 24, 2006 Share Posted October 24, 2006 Inspiron 9200 here. I can't seem to find the battery meter. Can anyone direct me? Link to comment Share on other sites More sharing options...
sierrabeat Posted October 25, 2006 Share Posted October 25, 2006 Hi! Dell Latitude D510 OSX 86 by JaS 1 Gb RAM DDR2 (2 DIM) Celeron M 1.5 Ghz HDD 60 Gb Display with Dongle I have an issue with DVD Player once installing the battery metter, no video only sound. Any idea how to fix this? Thx Link to comment Share on other sites More sharing options...
rathalos Posted October 31, 2006 Share Posted October 31, 2006 The powermanagement bundle works great!!! but when i plug in power with my batt removed, it always tell me that i'm running on batt.... the correct setting is shown only when i plug back in the battery and remove it again.... any correction to that issue?? Link to comment Share on other sites More sharing options...
jake123 Posted November 6, 2006 Share Posted November 6, 2006 Works for me Dell XPS M1210 Link to comment Share on other sites More sharing options...
insert_here Posted November 8, 2006 Share Posted November 8, 2006 works PERFECTLY on nc6120 although you'll only get a little over 2hrs with full charge on 1 battery :/ -wakes up from sleep but doesn't really go to sleep till I close lcd or hit the button -display turns off and on just fine -no problems when removing or connecting A/C power Thanks again for this bundle keithpk Link to comment Share on other sites More sharing options...
JustAnotherIdiot Posted November 8, 2006 Share Posted November 8, 2006 stupid question i've updated the file in my system but where exactly do u see this battery indicator cuz i dont see much difference :S TIA Link to comment Share on other sites More sharing options...
double Posted November 10, 2006 Share Posted November 10, 2006 Awsome!!! It works well on my laptop. DELL Inspiron E1505 9 Cell Battery Link to comment Share on other sites More sharing options...
Ruud Posted November 10, 2006 Share Posted November 10, 2006 doesn't seem to work anymore with the new amd .8 kernel.. can someone help me trying to fix it? Link to comment Share on other sites More sharing options...
JonD25 Posted November 13, 2006 Share Posted November 13, 2006 I used this and the battery meter works now.... right when I boot. So it'll tell me what my charge is at that moment in time, but as I charge it or unplug and the battery discharges, nothing changes. So, it's essentially useless. Anyone know how to fix it? I have a Dell D600. (sorry if this was addressed in one of the other 8 pages, but I don't really have the time to shuffle through 9 pages of info that doesn't even pertain to me to find the one that post that does) Link to comment Share on other sites More sharing options...
geo2002 Posted November 26, 2006 Share Posted November 26, 2006 Acer Aspire 5672WLMi Works fine. Thanks a lot! Link to comment Share on other sites More sharing options...
adaminc Posted December 7, 2006 Share Posted December 7, 2006 I did the thing with the PowerManagement Bundle, and the icon appears, but thats it, its the battery icon with an x in it, no calculating, no percentage, no time, no nothing, anyone have similar problems and have a fix for it? Link to comment Share on other sites More sharing options...
Auggie Posted December 9, 2006 Share Posted December 9, 2006 I love you in a completely heterosexual way, keithpk. Flawless with HP DV1440US under JaS 10.4.7 update... I'm scared to update to 10.4.8 because I have heard so much about it ruining things. I'll probably go for it anyway... Question -- can I edit the settings so that the icon updates itself faster? It's updating every 10 seconds right now, and I'd like to set it at 2 seconds if possible... otherwise it just takes a bit too long to update my status from external power to battery and so on... I looked around in the package at the plist files and all others in the bundle, but had no luck finding anything of significance (I think...) Do you know of anything? Thanks! Link to comment Share on other sites More sharing options...
adaminc Posted December 9, 2006 Share Posted December 9, 2006 works awesome, thanks keithpk your awesome, now I can actually use osx all the time without worrying that the computer is gonna just shutdown Link to comment Share on other sites More sharing options...
homer007 Posted December 16, 2006 Share Posted December 16, 2006 Acer Aspire 5672WLMiWorks fine. Thanks a lot! dude it doesnt work on Acer Aspire 5672!! does urs calculate and everything mine doesnt??!! Link to comment Share on other sites More sharing options...
geo2002 Posted December 17, 2006 Share Posted December 17, 2006 (edited) dude it doesnt work on Acer Aspire 5672!! does urs calculate and everything mine doesnt??!! It works perfectly on my Acer 5672WLMi with MacOSX 10.4.8 Semthex kernel (beta 8). It shows battery state (graphically, percentage or time) and charging. Edited December 17, 2006 by geo2002 Link to comment Share on other sites More sharing options...
homer007 Posted December 18, 2006 Share Posted December 18, 2006 It works perfectly on my Acer 5672WLMi with MacOSX 10.4.8 Semthex kernel (beta 8). It shows battery state (graphically, percentage or time) and charging. doesnt work on mine!! weird!! anywayz how did u install mac i upgraded mine from 10.4.7 and then installed the new kernel and then had to delete IOACPIFAMILY.kext beacause i was gettin kernel panic!!! Link to comment Share on other sites More sharing options...
geo2002 Posted December 18, 2006 Share Posted December 18, 2006 (edited) doesnt work on mine!! weird!! anywayz how did u install mac i upgraded mine from 10.4.7 and then installed the new kernel and then had to delete IOACPIFAMILY.kext beacause i was gettin kernel panic!!! I've made fresh installation from the Jas 10.4.8 Intel only DVD. Then I've applied kext from the first message of this topic, repaired permissions and now it works. And I have fully working audio (not AzaliaAudio.kext). So install 10.4.8. Edited December 18, 2006 by geo2002 Link to comment Share on other sites More sharing options...
homer007 Posted December 18, 2006 Share Posted December 18, 2006 I've made fresh installation from the Jas 10.4.8 Intel only DVD. Then I've applied kext from the first message of this topic, repaired permissions and now it works.And I have fully working audio (not AzaliaAudio.kext). So install 10.4.8. i cant install from JaS SS3 Intel Only cuz i get kernel panic after that!!!! so i have to update it from 10.4.7!!! can u be more specific, post the full method of ur installation here!!! it would really help me, i have vista installed on the first partition and the mac on third all r primary!!!! Link to comment Share on other sites More sharing options...
geo2002 Posted December 18, 2006 Share Posted December 18, 2006 i cant install from JaS SS3 Intel Only cuz i get kernel panic after that!!!! so i have to update it from 10.4.7!!! can u be more specific, post the full method of ur installation here!!! it would really help me, i have vista installed on the first partition and the mac on third all r primary!!!! I have Vista on the first partition, linux /boot as a second partition and MacOSX as a third. The Linux partition is active (I'm using GRUB to boot all OS). On installation you should add kernel parameter cpus=1 to avoid kernel panic. Select HFS+ (NOT journaled) as filesystem for 10.4.8 (It's needed to get write access to your macosx partition from the linux). Install MacOS standard way and then boot into linux and replace mach_kernel with the Semthex 8.8.1 beta 8. In additional you should edit your Boot.plist and add cpus=1 to kernel parameters. Then boot into MacOSX and repair permissions using DiskUtil. Don't boot from DVD after installation! It's strange but if you do this you will need DVD every time you want to boot into MAcOSX. Link to comment Share on other sites More sharing options...
Recommended Posts