Colonel Posted March 31, 2006 Share Posted March 31, 2006 Here's my Hackintosh's Xbench score. It's not the best machine, but at least it works. hackintosh.txt Link to comment Share on other sites More sharing options...
New001 Posted March 31, 2006 Share Posted March 31, 2006 And this is using my cheap old 40GB 4200 ATA/133 HD, tommorow I will use my SATA when I get 10.4.4 on it, my score will be in the 100s, and I'm using 1x512MB RAM, single-channel, less performance, blah, you know what I mean Xbench_10.4.5_X600.txt Link to comment Share on other sites More sharing options...
ignorantcow Posted March 31, 2006 Share Posted March 31, 2006 A dismally low score of 14.74.. I would say, my system fails at these two tests: OpenGL Graphics Test 3.32 Spinning Squares 3.32 4.21 frames/sec User Interface Test 11.29 Elements 11.29 51.79 refresh/sec xBench_Scores__nVb1__10.4.4.txt Link to comment Share on other sites More sharing options...
leoniloilo Posted April 1, 2006 Share Posted April 1, 2006 Pentium 4 640 LGA775 3.20Ghz 2MB L2-Cache 800Mhz FSB Intel 915DGH with integrated video & audio 2GB ram 2 HD Maxtor sata 300GB 10.4.1 result = 39.98 10.4.5 result = 52.27 OSX_10.4.1.txt OSX_10.4.5.txt Link to comment Share on other sites More sharing options...
JimBob Posted April 2, 2006 Share Posted April 2, 2006 I don't understand why about everyone's Random 4k uncached writes is so far below 100. Shouldn't the G5 the 100 score is based on be at 100 for that test too? If so, it's hard to believe Xbench is working right on intel. Would it make a big difference if the partition being tested on is near the begining or end of a hard disk? For example, on a 10,000 RPM SATA Raptor drive, the results show: Disk Test 72.31 Sequential 108.25 Uncached Write 117.42 72.10 MB/sec [4K blocks] Uncached Write 106.25 60.11 MB/sec [256K blocks] Uncached Read 99.35 29.07 MB/sec [4K blocks] Uncached Read 111.63 56.11 MB/sec [256K blocks] Random 54.28 Uncached Write 19.82 2.10 MB/sec [4K blocks] Uncached Write 111.24 35.61 MB/sec [256K blocks] Uncached Read 125.37 0.89 MB/sec [4K blocks] Uncached Read 159.55 29.61 MB/sec [256K blocks] Can anyone shed some light on what's going on here? Thanks. Link to comment Share on other sites More sharing options...
RiceTea Posted April 2, 2006 Share Posted April 2, 2006 Hard to tell how big the difference would be, but testing on a more or less empty volume, in other words testing towards the inner parts of the disk, would be faster. The further outside the slower it gets. I don't understand why about everyone's Random 4k uncached writes is so far below 100. Shouldn't the G5 the 100 score is based on be at 100 for that test too? If so, it's hard to believe Xbench is working right on intel. Would it make a big difference if the partition being tested on is near the begining or end of a hard disk? For example, on a 10,000 RPM SATA Raptor drive, the results show: Disk Test 72.31 Sequential 108.25 Uncached Write 117.42 72.10 MB/sec [4K blocks] Uncached Write 106.25 60.11 MB/sec [256K blocks] Uncached Read 99.35 29.07 MB/sec [4K blocks] Uncached Read 111.63 56.11 MB/sec [256K blocks] Random 54.28 Uncached Write 19.82 2.10 MB/sec [4K blocks] Uncached Write 111.24 35.61 MB/sec [256K blocks] Uncached Read 125.37 0.89 MB/sec [4K blocks] Uncached Read 159.55 29.61 MB/sec [256K blocks] Can anyone shed some light on what's going on here? Thanks. Link to comment Share on other sites More sharing options...
Korrupted Posted April 2, 2006 Share Posted April 2, 2006 Macbook Pro 1.83 GHz Intel Core Duo 512MB RAM 128MB Radeon x1600 80GB HDD Result: 54.10results.txt Sony Vaio VGC-RB53 3GHz Pentium 4 with HTT 1.25GB RAM 256MB Radeon x800 200GB HDD Result: 69.22result.txt Link to comment Share on other sites More sharing options...
sandr Posted April 2, 2006 Share Posted April 2, 2006 System Info Xbench Version 1.2 System Version 10.4.5 (8G1454) CPU AMD 3000+ Venice Physical RAM 1024 MB Model ADP2,1 Drive Type Maxtor 6Y060L0 CPU Test 72.55 Thread Test 74.27 Memory Test 96.92 Quartz Graphics Test 110.50 OpenGL Graphics Test 115.86 User Interface Test 120.39 Disk Test 45.94 total 82.04 Link to comment Share on other sites More sharing options...
Icebreaker Posted April 3, 2006 Share Posted April 3, 2006 Here are my results on a Dell 9200 laptop. 2.0 ghz, 1gb of ram, ati9700 128mb video card.Results 171.92 How can a Dell laptop outperform powerful desktops?? Well, here are the results from my iMac G5: Results 56.93 System Info Xbench Version 1.2 System Version 10.4.5 (8H14) Physical RAM 2048 MB Model PowerMac8,1 Processor PowerPC G5 @ 1.60 GHz L1 Cache 64K (instruction), 32K (data) L2 Cache 512K @ 1.60 GHz Bus Frequency 534 MHz Video Card GeForce FX 5200 Drive Type WDC WD800JD-40GBB2 Link to comment Share on other sites More sharing options...
guyin916 Posted April 3, 2006 Share Posted April 3, 2006 How can a Dell laptop outperform powerful desktops?? perhaps running an old version of xbench (i.e. 1.1.3) will yield a much higher score Link to comment Share on other sites More sharing options...
gustago Posted April 11, 2006 Share Posted April 11, 2006 Hard to tell how big the difference would be, but testing on a more or less empty volume, in other words testing towards the inner parts of the disk, would be faster. The further outside the slower it gets. Isn't it the other way arround? the fastest part of the disk is the outside since the plate goes faster under the heads? Link to comment Share on other sites More sharing options...
Ritchie Posted April 13, 2006 Share Posted April 13, 2006 Result : 103.35 Disabled Beam Sync, although enabled gave me 94, 80 and 78 results... Configuration: Mobo: Intel D915GUX CPU: Intel Pentium 4 M2 640HT 3.2Ghz RAM: 1GB DDR2 VGA: Onboard GMA900 (QE/CI/openGL) HDD:SATA2 WD200 Second Benchmark without disabling the Beamsync: RESULT: 74.04 Configuration: Mobo: MSI915GLM-V CPU: Intel Pentium 4 M2 630HT 3.0Ghz RAM: 1GB DDR VGA: Onboard GMA900 (QE/CI/openGL) HDD:SATA2 Hitachi 80GB xbench.txt M2630HT.txt Link to comment Share on other sites More sharing options...
merak Posted April 14, 2006 Share Posted April 14, 2006 97.99 without disableing beam ecc ecc Link to comment Share on other sites More sharing options...
guyin916 Posted April 14, 2006 Share Posted April 14, 2006 those are some nice numbers.... sounds pretty expensive Link to comment Share on other sites More sharing options...
neorm Posted April 15, 2006 Share Posted April 15, 2006 Results 72.72 System Info Xbench Version 1.2 System Version 10.4.3 (8F1099) Physical RAM 1024 MB Model ADP2,1 Drive Type IC35L040AVER07-0 CPU Test 60.00 GCD Loop 103.27 5.44 Mops/sec Floating Point Basic 70.24 1.67 Gflop/sec vecLib FFT 36.46 1.20 Gflop/sec Floating Point Library 65.27 11.37 Mops/sec Thread Test 57.33 Computation 45.60 923.80 Kops/sec, 4 threads Lock Contention 77.16 3.32 Mlocks/sec, 4 threads Memory Test 118.41 System 119.89 Allocate 224.79 825.49 Kalloc/sec Fill 101.45 4932.80 MB/sec Copy 93.32 1927.40 MB/sec Stream 116.95 Copy 114.13 2357.30 MB/sec Scale 106.87 2207.96 MB/sec Add 125.99 2683.96 MB/sec Triad 122.76 2626.09 MB/sec Quartz Graphics Test 90.69 Line 76.01 5.06 Klines/sec [50% alpha] Rectangle 95.31 28.45 Krects/sec [50% alpha] Circle 92.88 7.57 Kcircles/sec [50% alpha] Bezier 97.45 2.46 Kbeziers/sec [50% alpha] Text 95.65 5.98 Kchars/sec OpenGL Graphics Test 109.76 Spinning Squares 109.76 139.24 frames/sec User Interface Test 129.39 Elements 129.39 593.84 refresh/sec Disk Test 38.69 Sequential 71.94 Uncached Write 51.86 31.84 MB/sec [4K blocks] Uncached Write 67.56 38.22 MB/sec [256K blocks] Uncached Read 126.82 37.11 MB/sec [4K blocks] Uncached Read 73.37 36.88 MB/sec [256K blocks] Random 26.46 Uncached Write 8.78 0.93 MB/sec [4K blocks] Uncached Write 61.22 19.60 MB/sec [256K blocks] Uncached Read 87.03 0.62 MB/sec [4K blocks] Uncached Read 106.66 19.79 MB/sec [256K blocks] My spec. CPU: AMD 64 3000 (ven) Man: A8n-e Asus Ram: 512x2 Dual DDR 400 Graphic Card: Asus X300 SE Hard Disk: IBM 40G ATA 100 OS: 10.4.3 8f1099 Link to comment Share on other sites More sharing options...
Sipheren Posted April 16, 2006 Share Posted April 16, 2006 Score: 49.65 Using macvidia drivers, my opengl test didnt work I skipped it. P4.txt Link to comment Share on other sites More sharing options...
clownberg Posted April 16, 2006 Share Posted April 16, 2006 Dell 8400 Intel Pentium 4 3.0 Ghz 2 Gb Ram ati x300 Mac OS X86 10.4.6 Beam Synchronization turned off Results 91.34 System Info Xbench Version 1.2 System Version 10.4.6 (8I1119) Physical RAM 2048 MB Model ADP2,1 Drive Type ST3160023AS CPU Test 65.48 GCD Loop 89.21 4.70 Mops/sec Floating Point Basic 77.27 1.84 Gflop/sec vecLib FFT 46.92 1.55 Gflop/sec Floating Point Library 63.99 11.14 Mops/sec Thread Test 104.06 Computation 77.22 1.56 Mops/sec, 4 threads Lock Contention 159.49 6.86 Mlocks/sec, 4 threads Memory Test 122.35 System 101.66 Allocate 69.19 254.08 Kalloc/sec Fill 133.30 6481.55 MB/sec Copy 132.38 2734.32 MB/sec Stream 153.59 Copy 149.14 3080.51 MB/sec Scale 149.83 3095.43 MB/sec Add 158.13 3368.41 MB/sec Triad 157.73 3374.34 MB/sec Quartz Graphics Test 97.86 Line 92.44 6.15 Klines/sec [50% alpha] Rectangle 93.03 27.77 Krects/sec [50% alpha] Circle 95.04 7.75 Kcircles/sec [50% alpha] Bezier 100.73 2.54 Kbeziers/sec [50% alpha] Text 110.19 6.89 Kchars/sec OpenGL Graphics Test 118.26 Spinning Squares 118.26 150.03 frames/sec User Interface Test 168.41 Elements 168.41 772.93 refresh/sec Disk Test 52.71 Sequential 97.70 Uncached Write 95.39 58.57 MB/sec [4K blocks] Uncached Write 95.41 53.98 MB/sec [256K blocks] Uncached Read 94.21 27.57 MB/sec [4K blocks] Uncached Read 106.80 53.68 MB/sec [256K blocks] Random 36.09 Uncached Write 12.57 1.33 MB/sec [4K blocks] Uncached Write 73.67 23.59 MB/sec [256K blocks] Uncached Read 96.61 0.68 MB/sec [4K blocks] Uncached Read 136.27 25.29 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
dastrom Posted April 17, 2006 Share Posted April 17, 2006 My xbench 1.2 result is 71.75 Intel D915GLVGL P4 775 800fsb 2.8 ghz 1 gb DDR 3200 Ram 200 gb SATA Drive GMA 900 Video w/q & ci LG GSA-4061b DVD-RW OSx86 10.4.6, Windows XP, Ubuntu Dapper triple boot Was better than I thought it would be! Link to comment Share on other sites More sharing options...
Ravi7791 Posted April 18, 2006 Share Posted April 18, 2006 Mac mini 1.42/1Gb Sucks Results 39.71 System Info Xbench Version 1.2 System Version 10.4.5 (8H14) Physical RAM 1024 MB Model PowerMac10,1 Processor PowerPC G4 @ 1.42 GHz L1 Cache 32K (instruction), 32K (data) L2 Cache 512K @ 1.42 GHz Bus Frequency 167 MHz Video Card ATY,RV280 Drive Type ST9808210A CPU Test 59.33 GCD Loop 131.07 6.91 Mops/sec Floating Point Basic 39.51 938.67 Mflop/sec vecLib FFT 84.36 2.78 Gflop/sec Floating Point Library 44.20 7.70 Mops/sec Thread Test 63.19 Computation 60.76 1.23 Mops/sec, 4 threads Lock Contention 65.82 2.83 Mlocks/sec, 4 threads Memory Test 29.43 System 33.49 Allocate 132.45 486.41 Kalloc/sec Fill 31.55 1534.19 MB/sec Copy 19.87 410.36 MB/sec Stream 26.25 Copy 26.16 540.39 MB/sec [altivec] Scale 25.18 520.16 MB/sec [altivec] Add 26.81 571.04 MB/sec [altivec] Triad 26.92 575.81 MB/sec [altivec] Quartz Graphics Test 55.18 Line 42.05 2.80 Klines/sec [50% alpha] Rectangle 49.70 14.84 Krects/sec [50% alpha] Circle 49.91 4.07 Kcircles/sec [50% alpha] Bezier 68.10 1.72 Kbeziers/sec [50% alpha] Text 83.42 5.22 Kchars/sec OpenGL Graphics Test 65.73 Spinning Squares 65.73 83.38 frames/sec User Interface Test 35.10 Elements 35.10 161.10 refresh/sec Disk Test 20.92 Sequential 26.77 Uncached Write 22.79 14.00 MB/sec [4K blocks] Uncached Write 40.42 22.87 MB/sec [256K blocks] Uncached Read 18.65 5.46 MB/sec [4K blocks] Uncached Read 36.79 18.49 MB/sec [256K blocks] Random 17.17 Uncached Write 6.14 0.65 MB/sec [4K blocks] Uncached Write 29.77 9.53 MB/sec [256K blocks] Uncached Read 50.38 0.36 MB/sec [4K blocks] Uncached Read 59.76 11.09 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
bomber Posted April 18, 2006 Share Posted April 18, 2006 my score: 135 AMD Opteron 144@2.7Ghz DFI nf4-u , 1go pc4800 , x800pro Link to comment Share on other sites More sharing options...
VerthNeel Posted April 21, 2006 Share Posted April 21, 2006 Results 109.49 System Info Xbench Version 1.2 System Version 10.4.5 (8G1454) Physical RAM 1536 MB Model ADP2,1 Drive Type Maxtor 6B200M0 CPU Test 87.00 GCD Loop 142.96 7.54 Mops/sec Floating Point Basic 99.95 2.37 Gflop/sec vecLib FFT 53.43 1.76 Gflop/sec Floating Point Library 97.43 16.96 Mops/sec Thread Test 87.07 Computation 64.67 1.31 Mops/sec, 4 threads Lock Contention 133.17 5.73 Mlocks/sec, 4 threads Memory Test 123.19 System 129.39 Allocate 207.35 761.45 Kalloc/sec Fill 113.59 5523.12 MB/sec Copy 104.61 2160.76 MB/sec Stream 117.55 Copy 123.82 2557.36 MB/sec Scale 117.61 2429.76 MB/sec Add 114.96 2448.99 MB/sec Triad 114.27 2444.62 MB/sec Quartz Graphics Test 124.83 Line 89.62 5.97 Klines/sec [50% alpha] Rectangle 130.19 38.87 Krects/sec [50% alpha] Circle 126.10 10.28 Kcircles/sec [50% alpha] Bezier 122.69 3.09 Kbeziers/sec [50% alpha] Text 194.78 12.18 Kchars/sec OpenGL Graphics Test 143.56 Spinning Squares 143.56 182.11 frames/sec User Interface Test 146.28 Elements 146.28 671.35 refresh/sec Disk Test 90.74 Sequential 126.95 Uncached Write 129.36 79.43 MB/sec [4K blocks] Uncached Write 115.33 65.26 MB/sec [256K blocks] Uncached Read 145.02 42.44 MB/sec [4K blocks] Uncached Read 121.77 61.20 MB/sec [256K blocks] Random 70.60 Uncached Write 33.30 3.53 MB/sec [4K blocks] Uncached Write 122.08 39.08 MB/sec [256K blocks] Uncached Read 96.05 0.68 MB/sec [4K blocks] Uncached Read 124.63 23.13 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
RiceTea Posted April 21, 2006 Share Posted April 21, 2006 Without providing details of your hardware/software in use these results make little sense to others. Which CPU, mobo? Graphics? Which OS version? Results 109.49 System Info Xbench Version 1.2 System Version 10.4.5 (8G1454) Physical RAM 1536 MB Model ADP2,1 Drive Type Maxtor 6B200M0 CPU Test 87.00 GCD Loop 142.96 7.54 Mops/sec Floating Point Basic 99.95 2.37 Gflop/sec vecLib FFT 53.43 1.76 Gflop/sec Floating Point Library 97.43 16.96 Mops/sec Thread Test 87.07 Computation 64.67 1.31 Mops/sec, 4 threads Lock Contention 133.17 5.73 Mlocks/sec, 4 threads Memory Test 123.19 System 129.39 Allocate 207.35 761.45 Kalloc/sec Fill 113.59 5523.12 MB/sec Copy 104.61 2160.76 MB/sec Stream 117.55 Copy 123.82 2557.36 MB/sec Scale 117.61 2429.76 MB/sec Add 114.96 2448.99 MB/sec Triad 114.27 2444.62 MB/sec Quartz Graphics Test 124.83 Line 89.62 5.97 Klines/sec [50% alpha] Rectangle 130.19 38.87 Krects/sec [50% alpha] Circle 126.10 10.28 Kcircles/sec [50% alpha] Bezier 122.69 3.09 Kbeziers/sec [50% alpha] Text 194.78 12.18 Kchars/sec OpenGL Graphics Test 143.56 Spinning Squares 143.56 182.11 frames/sec User Interface Test 146.28 Elements 146.28 671.35 refresh/sec Disk Test 90.74 Sequential 126.95 Uncached Write 129.36 79.43 MB/sec [4K blocks] Uncached Write 115.33 65.26 MB/sec [256K blocks] Uncached Read 145.02 42.44 MB/sec [4K blocks] Uncached Read 121.77 61.20 MB/sec [256K blocks] Random 70.60 Uncached Write 33.30 3.53 MB/sec [4K blocks] Uncached Write 122.08 39.08 MB/sec [256K blocks] Uncached Read 96.05 0.68 MB/sec [4K blocks] Uncached Read 124.63 23.13 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
tekno Posted April 21, 2006 Share Posted April 21, 2006 Results 121.98 System Info Xbench Version 1.2 System Version 10.4.5 (8G1454) Physical RAM 2048 MB Model ADP2,1 Drive Type Maxtor 6L080M0 CPU Test 81.73 GCD Loop 109.80 5.79 Mops/sec Floating Point Basic 93.20 2.21 Gflop/sec vecLib FFT 61.49 2.03 Gflop/sec Floating Point Library 77.86 13.56 Mops/sec Thread Test 204.39 Computation 185.02 3.75 Mops/sec, 4 threads Lock Contention 228.30 9.82 Mlocks/sec, 4 threads Memory Test 127.54 System 112.03 Allocate 83.95 308.29 Kalloc/sec Fill 150.73 7328.87 MB/sec Copy 121.47 2508.98 MB/sec Stream 148.04 Copy 142.16 2936.29 MB/sec Scale 141.44 2922.10 MB/sec Add 155.90 3320.91 MB/sec Triad 153.84 3291.05 MB/sec Quartz Graphics Test 121.94 Line 123.12 8.20 Klines/sec [50% alpha] Rectangle 114.58 34.21 Krects/sec [50% alpha] Circle 116.27 9.48 Kcircles/sec [50% alpha] Bezier 118.42 2.99 Kbeziers/sec [50% alpha] Text 140.69 8.80 Kchars/sec OpenGL Graphics Test 152.32 Spinning Squares 152.32 193.22 frames/sec User Interface Test 163.82 Elements 163.82 751.84 refresh/sec Disk Test 86.61 Sequential 121.88 Uncached Write 107.24 65.84 MB/sec [4K blocks] Uncached Write 113.79 64.38 MB/sec [256K blocks] Uncached Read 151.17 44.24 MB/sec [4K blocks] Uncached Read 123.60 62.12 MB/sec [256K blocks] Random 67.17 Uncached Write 31.81 3.37 MB/sec [4K blocks] Uncached Write 113.27 36.26 MB/sec [256K blocks] Uncached Read 89.80 0.64 MB/sec [4K blocks] Uncached Read 122.76 22.78 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
EPDM Posted April 22, 2006 Share Posted April 22, 2006 My system ECS 915P-A P4 630 3GHz 2MB cache X600pro 120GB S-ATA Maxtor HDD 2GB DDR400 Memory I did several test. Standard = is with QE enabled, Beamsync on The other tests are done with QE2D enabled and beamSync dissabled The 3300-tests are with an overclocked system (FSB220 or 880MHz QDR). My CPU is then seen as a 3300MHz system. Again I preformed a standard test and one with Beamsync disabled and QE2D enabled. Standard my system recognises the ATI X600pro and enables CI and QE. Regards, EPDM 3000_standard.txt 3000_qe2d_nobeamsync.txt 3300_standard.txt 3300_qe2d_nobeamsync.txt Link to comment Share on other sites More sharing options...
cjbedm Posted April 22, 2006 Share Posted April 22, 2006 This is from an Intel P4 3.00GHz on a D945GNT MB, 1 GB DDR2 SDRAM, 250GB SATA, on-board GMA 950, running Mac OS X 10.4.6 (8I1119), already loaded with iLife 06 and Office 2004. Anyone with similar setup have similar results? Results 69.47 System Info Xbench Version 1.2 System Version 10.4.6 (8I1119) Physical RAM 1024 MB Model ADP2,1 Drive Type SAMSUNG SP2504C CPU Test 63.92 GCD Loop 91.10 4.80 Mops/sec Floating Point Basic 70.58 1.68 Gflop/sec vecLib FFT 45.71 1.51 Gflop/sec Floating Point Library 64.29 11.20 Mops/sec Thread Test 99.46 Computation 82.24 1.67 Mops/sec, 4 threads Lock Contention 125.79 5.41 Mlocks/sec, 4 threads Memory Test 107.20 System 94.80 Allocate 67.20 246.80 Kalloc/sec Fill 121.91 5927.70 MB/sec Copy 116.79 2412.26 MB/sec Stream 123.33 Copy 120.03 2479.09 MB/sec Scale 121.02 2500.19 MB/sec Add 126.88 2702.73 MB/sec Triad 125.68 2688.62 MB/sec Quartz Graphics Test 57.46 Line 60.08 4.00 Klines/sec [50% alpha] Rectangle 45.97 13.72 Krects/sec [50% alpha] Circle 45.58 3.72 Kcircles/sec [50% alpha] Bezier 78.97 1.99 Kbeziers/sec [50% alpha] Text 71.37 4.46 Kchars/sec OpenGL Graphics Test 197.11 Spinning Squares 197.11 250.04 frames/sec User Interface Test 44.80 Elements 44.80 205.61 refresh/sec Disk Test 47.75 Sequential 97.86 Uncached Write 134.82 82.78 MB/sec [4K blocks] Uncached Write 127.60 72.19 MB/sec [256K blocks] Uncached Read 55.32 16.19 MB/sec [4K blocks] Uncached Read 132.53 66.61 MB/sec [256K blocks] Random 31.58 Uncached Write 10.14 1.07 MB/sec [4K blocks] Uncached Write 117.82 37.72 MB/sec [256K blocks] Uncached Read 82.37 0.58 MB/sec [4K blocks] Uncached Read 135.39 25.12 MB/sec [256K blocks] :pirate2: Link to comment Share on other sites More sharing options...
Recommended Posts