Jump to content

x86 Xbench Results Thread


Sam0r
 Share

1,168 posts in this topic

Recommended Posts

Just installed Kalyway 10.5.2 on rig with specs below:

 

Q6600 @ 3.6GHz (1.46V)

2 x 1GB Xtreem DDR2 RAM @ 1066MHz (4-4-4-12)

ASUS Blitz Formula SE

MSI RX3870 with 512MB GDDR4 RAM

Corsair HX 620W PSU

WD 640GB (need 2 get another n RAID it 0)

Samsung 22x SATA DVD writer

WaterCooled the CPU-NB-GPU...single loop

PA120.3, D-TEK Fuzion, MCP30, MCP655, 6 x Scythe S-Flex & T-Line.

 

Xbench Score : 244.12 First time on OSX... so is that good :dev:

Link to comment
Share on other sites

Here are my results. I think im not too far off for my specs

 

 

 

Dual Intel Xeon 3.2GHz HT is enabled on both procs

4 GB DDR2 400 ecc ( i turned ecc off for performance though )

Nvidia Geforce 8600GTS full QE/CI running dual monitors 1600X1200

Broadcom Gigabit Ethernet ( BCM 5751 Chipset)

Kalyway 10.5.2 Using the Kabyl Kernel

 

Is it poissible to maky my Hard drives perform any better ? They are both SATA disks and OSX is dedicated to one. It appears that they are my real holdup on getting any higher of a score :unsure:

 

 

Results 105.04

System Info

Xbench Version 1.3

System Version 10.5.2 (9C7010)

Physical RAM 4096 MB

Model MacPro3,1

Drive Type ST3808110AS ST3808110AS

CPU Test 77.11

GCD Loop 97.28 5.13 Mops/sec

Floating Point Basic 76.46 1.82 Gflop/sec

vecLib FFT 49.77 1.64 Gflop/sec

Floating Point Library 118.74 20.68 Mops/sec

Thread Test 156.97

Computation 168.66 3.42 Mops/sec, 4 threads

Lock Contention 146.79 6.32 Mlocks/sec, 4 threads

Memory Test 112.06

System 136.77

Allocate 154.87 568.75 Kalloc/sec

Fill 130.26 6333.78 MB/sec

Copy 128.19 2647.73 MB/sec

Stream 94.91

Copy 91.36 1886.91 MB/sec

Scale 95.09 1964.63 MB/sec

Add 97.00 2066.20 MB/sec

Triad 96.42 2062.56 MB/sec

Quartz Graphics Test 156.89

Line 133.29 8.87 Klines/sec [50% alpha]

Rectangle 158.24 47.24 Krects/sec [50% alpha]

Circle 134.50 10.96 Kcircles/sec [50% alpha]

Bezier 132.54 3.34 Kbeziers/sec [50% alpha]

Text 325.90 20.39 Kchars/sec

OpenGL Graphics Test 120.11

Spinning Squares 120.11 152.36 frames/sec

User Interface Test 176.03

Elements 176.03 807.88 refresh/sec

Disk Test 55.57

Sequential 93.24

Uncached Write 66.39 40.76 MB/sec [4K blocks]

Uncached Write 97.17 54.98 MB/sec [256K blocks]

Uncached Read 113.19 33.13 MB/sec [4K blocks]

Uncached Read 114.81 57.70 MB/sec [256K blocks]

Random 39.58

Uncached Write 13.89 1.47 MB/sec [4K blocks]

Uncached Write 95.92 30.71 MB/sec [256K blocks]

Uncached Read 90.64 0.64 MB/sec [4K blocks]

Uncached Read 131.27 24.36 MB/sec [256K blocks]

Link to comment
Share on other sites

I'm a happy camper with my score :) Q9300 Quad Core running at standard 2.5 GHz (no overclocking), 8MB-1066 DDR2 RAM, GeForce 8800GT w 512MB graphics, 150MB 10,000 rpm Western Digital Raptor Drive, GA EP35-DS4 motherboard

 

Results 201.90

System Info

Xbench Version 1.3

System Version 10.5.2 (9C7010)

Physical RAM 8192 MB

Model MacPro3,1

Drive Type WDC WD1500ADFD-00NLR5 WDC WD1500ADFD-00NLR5

CPU Test 182.13

GCD Loop 314.87 16.60 Mops/sec

Floating Point Basic 153.27 3.64 Gflop/sec

vecLib FFT 127.74 4.21 Gflop/sec

Floating Point Library 225.52 39.27 Mops/sec

Thread Test 433.44

Computation 503.70 10.20 Mops/sec, 4 threads

Lock Contention 380.38 16.36 Mlocks/sec, 4 threads

Memory Test 256.85

System 273.00

Allocate 349.04 1.28 Malloc/sec

Fill 224.71 10926.09 MB/sec

Copy 272.19 5621.98 MB/sec

Stream 242.50

Copy 226.97 4688.01 MB/sec

Scale 228.55 4721.82 MB/sec

Add 260.59 5551.08 MB/sec

Triad 257.99 5519.12 MB/sec

Quartz Graphics Test 266.52

Line 210.15 13.99 Klines/sec [50% alpha]

Rectangle 284.68 84.99 Krects/sec [50% alpha]

Circle 228.54 18.63 Kcircles/sec [50% alpha]

Bezier 223.85 5.65 Kbeziers/sec [50% alpha]

Text 607.41 38.00 Kchars/sec

OpenGL Graphics Test 165.99

Spinning Squares 165.99 210.57 frames/sec

User Interface Test 438.59

Elements 438.59 2.01 Krefresh/sec

Disk Test 91.54

Sequential 170.85

Uncached Write 192.42 118.15 MB/sec [4K blocks]

Uncached Write 183.72 103.95 MB/sec [256K blocks]

Uncached Read 132.80 38.87 MB/sec [4K blocks]

Uncached Read 190.76 95.88 MB/sec [256K blocks]

Random 62.52

Uncached Write 20.90 2.21 MB/sec [4K blocks]

Uncached Write 232.70 74.50 MB/sec [256K blocks]

Uncached Read 143.31 1.02 MB/sec [4K blocks]

Uncached Read 205.93 38.21 MB/sec [256K blocks]

 

 

p_delete.gifp_middot.gif

Link to comment
Share on other sites

I have a Dell GX260

Pentium 4 2Ghz (SSE2)

1GB RAM

nVidia 6200 (256MB)

 

Granted it's only a P4... but I'm only getting a score of 21.02 . Logic Express crashes all the time.

 

Other scores from other Macs I've tested:

G4 533mhz: 26.98

G4 Mac Mini (1.4Ghz): 46.51

Mac Mini (Core Solo): 72.77

 

Do I need a patch or something?

 

Any help would be appreciated.

Link to comment
Share on other sites

My Specs

 

Intel Core2Duo E6750 @ 2,33Ghz

Ati HD2600XT

2GB Dual Channel Ram

Mobo GA-G33M-S2L

 

Score 163,87 / 197,40 No HD

 

Results 197.40

System Info

Xbench Version 1.3

System Version 10.5.3 (9D34)

Physical RAM 2048 MB

Model MacPro3,1

Drive Type WDC WD5000AAKS-00YGA0

CPU Test 144.10

GCD Loop 272.95 14.39 Mops/sec

Floating Point Basic 130.74 3.11 Gflop/sec

vecLib FFT 104.65 3.45 Gflop/sec

Floating Point Library 145.12 25.27 Mops/sec

Thread Test 200.87

Computation 203.01 4.11 Mops/sec, 4 threads

Lock Contention 198.77 8.55 Mlocks/sec, 4 threads

Memory Test 188.13

System 189.62

Allocate 171.76 630.75 Kalloc/sec

Fill 183.73 8933.36 MB/sec

Copy 219.49 4533.40 MB/sec

Stream 186.66

Copy 174.71 3608.49 MB/sec

Scale 177.55 3668.05 MB/sec

Add 199.97 4259.89 MB/sec

Triad 197.15 4217.59 MB/sec

Quartz Graphics Test 230.89

Line 179.07 11.92 Klines/sec [50% alpha]

Rectangle 242.21 72.31 Krects/sec [50% alpha]

Circle 195.01 15.90 Kcircles/sec [50% alpha]

Bezier 184.05 4.64 Kbeziers/sec [50% alpha]

Text 723.87 45.28 Kchars/sec

OpenGL Graphics Test 168.27

Spinning Squares 168.27 213.46 frames/sec

User Interface Test 346.30

Elements 346.30 1.59 Krefresh/sec

 

P.S.: this is a silent System no Fans no noise ... ;-)

Xbench_Disk.zip

Xbench.zip

Link to comment
Share on other sites

E7200 45nm Wolfdale OC to 3.2 Ghz (originally 2.53 ghz)

Gigabyte EP35-DS3R

4 gig Patriot Ram at 667 Mhz, 5-5-5-10 timing

500 GB seagate barricuda 32 mb cache

Nvidia 8800GT OC 512 mb BFG

 

Results below:

Results	266.57	
System Info		
	Xbench Version		1.3
	System Version		10.5.2 (9C7010)
	Physical RAM		4096 MB
	Model		MacPro3,1
	Drive Type		ST3500320AS
CPU Test	214.39	
	GCD Loop	370.73	19.54 Mops/sec
	Floating Point Basic	180.50	4.29 Gflop/sec
	vecLib FFT	149.80	4.94 Gflop/sec
	Floating Point Library	267.09	46.51 Mops/sec
Thread Test	341.34	
	Computation	560.53	11.36 Mops/sec, 4 threads
	Lock Contention	245.38	10.56 Mlocks/sec, 4 threads
Memory Test	213.41	
	System	253.86	
		Allocate	268.83	987.23 Kalloc/sec
		Fill	229.71	11168.81 MB/sec
		Copy	267.08	5516.38 MB/sec
	Stream	184.07	
		Copy	175.62	3627.31 MB/sec
		Scale	172.41	3561.85 MB/sec
		Add	195.84	4171.79 MB/sec
		Triad	194.94	4170.24 MB/sec
Quartz Graphics Test	318.28	
	Line	243.67	16.22 Klines/sec [50% alpha]
	Rectangle	335.51	100.17 Krects/sec [50% alpha]
	Circle	267.00	21.76 Kcircles/sec [50% alpha]
	Bezier	258.18	6.51 Kbeziers/sec [50% alpha]
	Text	993.66	62.16 Kchars/sec
OpenGL Graphics Test	200.49	
	Spinning Squares	200.49	254.33 frames/sec
User Interface Test	476.49	
	Elements	476.49	2.19 Krefresh/sec

Link to comment
Share on other sites

For some reason my scores look low compared to slower machines. Can someone tell me if it looks right. And how do I make sure all cores are working.

 

My setup:

Gigabyte GA-P35-DS3L

Intel Core2Quad Q6600

Nvidia 8800GTS

4gig Kingston memory 667MHZ

500GB HDD

 

 

Results 145.57

System Info

Xbench Version 1.3

System Version 10.5.1 (9B18)

Physical RAM 4096 MB

Model Mac Pro

Drive Type HDS725050KLA360

CPU Test 139.80

GCD Loop 283.49 14.94 Mops/sec

Floating Point Basic 137.99 3.28 Gflop/sec

vecLib FFT 112.62 3.72 Gflop/sec

Floating Point Library 111.62 19.44 Mops/sec

Thread Test 234.26

Computation 217.59 4.41 Mops/sec, 4 threads

Lock Contention 253.69 10.91 Mlocks/sec, 4 threads

Memory Test 186.02

System 205.20

Allocate 296.82 1.09 Malloc/sec

Fill 167.64 8151.10 MB/sec

Copy 189.20 3907.80 MB/sec

Stream 170.12

Copy 158.46 3272.96 MB/sec

Scale 161.43 3335.02 MB/sec

Add 181.38 3863.79 MB/sec

Triad 182.01 3893.60 MB/sec

Quartz Graphics Test 202.50

Line 166.42 11.08 Klines/sec [50% alpha]

Rectangle 211.76 63.22 Krects/sec [50% alpha]

Circle 169.01 13.78 Kcircles/sec [50% alpha]

Bezier 172.87 4.36 Kbeziers/sec [50% alpha]

Text 442.80 27.70 Kchars/sec

OpenGL Graphics Test 166.65

Spinning Squares 166.65 211.41 frames/sec

User Interface Test 326.09

Elements 326.09 1.50 Krefresh/sec

Disk Test 57.85

Sequential 99.53

Uncached Write 97.98 60.16 MB/sec [4K blocks]

Uncached Write 104.34 59.03 MB/sec [256K blocks]

Uncached Read 83.48 24.43 MB/sec [4K blocks]

Uncached Read 118.76 59.69 MB/sec [256K blocks]

Random 40.78

Uncached Write 14.08 1.49 MB/sec [4K blocks]

Uncached Write 103.87 33.25 MB/sec [256K blocks]

Uncached Read 96.90 0.69 MB/sec [4K blocks]

Uncached Read 140.13 26.00 MB/sec [256K blocks]

Link to comment
Share on other sites

E8400

GA-EP35-DS3R

3 GB DDR2 800 MHZ

8800 GT

500 GB HDD

 

Results 207.30

System Info

Xbench Version 1.3

System Version 10.5.3 (9D34)

Physical RAM 3072 MB

Model MacPro3,1

Drive Type ST3500320AS

CPU Test 230.15

GCD Loop 391.78 20.65 Mops/sec

Floating Point Basic 194.31 4.62 Gflop/sec

vecLib FFT 161.59 5.33 Gflop/sec

Floating Point Library 286.32 49.86 Mops/sec

Thread Test 483.27

Computation 651.15 13.19 Mops/sec, 4 threads

Lock Contention 384.21 16.53 Mlocks/sec, 4 threads

Memory Test 230.06

System 296.39

Allocate 340.07 1.25 Malloc/sec

Fill 255.92 12443.22 MB/sec

Copy 305.46 6309.22 MB/sec

Stream 187.99

Copy 179.26 3702.46 MB/sec

Scale 184.66 3814.95 MB/sec

Add 194.57 4144.65 MB/sec

Triad 194.42 4159.04 MB/sec

Quartz Graphics Test 346.41

Line 267.49 17.81 Klines/sec [50% alpha]

Rectangle 359.41 107.30 Krects/sec [50% alpha]

Circle 289.44 23.59 Kcircles/sec [50% alpha]

Bezier 283.26 7.14 Kbeziers/sec [50% alpha]

Text 1078.04 67.44 Kchars/sec

OpenGL Graphics Test 219.68

Spinning Squares 219.68 278.67 frames/sec

User Interface Test 565.90

Elements 565.90 2.60 Krefresh/sec

Disk Test 72.46

Sequential 171.16

Uncached Write 188.09 115.49 MB/sec [4K blocks]

Uncached Write 183.53 103.84 MB/sec [256K blocks]

Uncached Read 125.11 36.62 MB/sec [4K blocks]

Uncached Read 216.80 108.96 MB/sec [256K blocks]

Random 45.96

Uncached Write 14.63 1.55 MB/sec [4K blocks]

Uncached Write 274.17 87.77 MB/sec [256K blocks]

Uncached Read 107.02 0.76 MB/sec [4K blocks]

Uncached Read 175.83 32.63 MB/sec [256K blocks]

Link to comment
Share on other sites

Hi harsvfx, just from looking at my scores and comparing them to others running on various subversions of Leopard, I think that could be your biggest issue; you still haven't updated your 10.5.1 to a more recent version and I can tell you that my system is noticeably faster with 10.5.3. My Sapphire Radeon HD2600XT should not be smoking your 8800GTS on the graphics part, but it looks like it is. And I've seen a number of other 8800 graphics cards on systems lower than 10.5.3 that aren't performing as well as mine, so I wouldn't be surprised if that's not part of it. I'd think that my graphics scores would be lower since my card is driving two monitors of decent resolution, but all I can say, as someone who never does "gaming" or other seriously graphics-intensive stuff, is I'm totally thrilled with the performance of this budget-priced card and fact that it's totally silent (a fanless model with a big heatsink) and draws very little power, so is really giving me good performance for the power consumption. My system, with four internal drives, two monitors, and several power-drawing USB devices is only drawing about 100w from the grid right now, while running multiple applications (it goes to about 130w when ripping video with HandBrake, which pretty well puts my dual-core processor at maximum load). That's not counting my actual monitor draw, btw, which might be about 60w more -- haven't checked yet. Anyway, I can't complain. Even my old Mac Mini didn't draw so much less power and to have the file storage I'd have to be running lots of external USB/Firewire cases, etc.

 

Regarding your cores: It may be that this version of Xbench doesn't fully load all four cores, but you could try something else (maybe Geekbench) and or just see if all 4 cores are being used when you're using an app that is processor-intensive (e.g. look at the graphic depiction of the cores in the Activity Monitor -- Applications / Utilities -- while running an app like HandBrake... )

 

Anyway, if you want to see if it helps any, I'd try updating to 10.5.3 using any of the recommended methods for OSx86 and see if that helps things a bit. It is recommended, after all, for security reasons, etc. You may need to go to a bit of hassle to get everything (sound/graphics) all working right again, but it should deliver a noticeable performance boost for general usability. My box seems to start up much faster, too, since updating from 10.5.2, though I never actually timed it before. I never ran 10.5.1, but I've read people found it slowed down the start-up process they'd had with 10.5.1, so it might not be as noticeable for you.

 

Hope any of that helps, but I wouldn't worry too much... I'm sure you're happy with your system when you aren't thinking about the lower-than-they-could-be numbers, right? :guitar:

 

Edit: Another thought. I suppose it should go without saying that we should run the test when our systems are as fresh as possible (no other apps running and taking up threads) I just ran it a couple times (with and without HD test) to see how it would compare with 50+ browser tabs open, Transmission seeding on about 10 torrents, and Mail, Preview, TextEdit and a few other processes running... and my score was about 20% lower (though the scores were much higher with the HDD part unchecked). So did you run it after starting up your system, with no other apps running, or were you maybe running lots of other threads?

For some reason my scores look low compared to slower machines. Can someone tell me if it looks right. And how do I make sure all cores are working.

 

My setup:

Gigabyte GA-P35-DS3L

Intel Core2Quad Q6600

Nvidia 8800GTS

4gig Kingston memory 667MHZ

500GB HDD

Results 145.57

System Info

Xbench Version 1.3

System Version 10.5.1 (9B18)

Physical RAM 4096 MB

Model Mac Pro

Drive Type HDS725050KLA360

CPU Test 139.80

GCD Loop 283.49 14.94 Mops/sec

Floating Point Basic 137.99 3.28 Gflop/sec

vecLib FFT 112.62 3.72 Gflop/sec

Floating Point Library 111.62 19.44 Mops/sec

Thread Test 234.26

Computation 217.59 4.41 Mops/sec, 4 threads

Lock Contention 253.69 10.91 Mlocks/sec, 4 threads

Memory Test 186.02

System 205.20

Allocate 296.82 1.09 Malloc/sec

Fill 167.64 8151.10 MB/sec

Copy 189.20 3907.80 MB/sec

Stream 170.12

Copy 158.46 3272.96 MB/sec

Scale 161.43 3335.02 MB/sec

Add 181.38 3863.79 MB/sec

Triad 182.01 3893.60 MB/sec

Quartz Graphics Test 202.50

Line 166.42 11.08 Klines/sec [50% alpha]

Rectangle 211.76 63.22 Krects/sec [50% alpha]

Circle 169.01 13.78 Kcircles/sec [50% alpha]

Bezier 172.87 4.36 Kbeziers/sec [50% alpha]

Text 442.80 27.70 Kchars/sec

OpenGL Graphics Test 166.65

Spinning Squares 166.65 211.41 frames/sec

User Interface Test 326.09

Elements 326.09 1.50 Krefresh/sec

Disk Test 57.85

Sequential 99.53

Uncached Write 97.98 60.16 MB/sec [4K blocks]

Uncached Write 104.34 59.03 MB/sec [256K blocks]

Uncached Read 83.48 24.43 MB/sec [4K blocks]

Uncached Read 118.76 59.69 MB/sec [256K blocks]

Random 40.78

Uncached Write 14.08 1.49 MB/sec [4K blocks]

Uncached Write 103.87 33.25 MB/sec [256K blocks]

Uncached Read 96.90 0.69 MB/sec [4K blocks]

Uncached Read 140.13 26.00 MB/sec [256K blocks]

Link to comment
Share on other sites

Gigabyte EP35-DS4, E8400 Core2Duo 3GHz 45nM processor, Radeon HD 2600 XT 256MB GDDR3, 4GB RAM, 4 std 7200rpm HDDs (no RAID) -- more specs in signature.

 

Well the disk could be a bit faster, but I'm happy with my Xbench score (204 with HD)... It was really just idle curiosity running Xbench. I wanted to make sure things were as they should be. I'm most surprised by the rather good performance of the graphics section, even compared to some of you who've posted results from systems with much more powerful display cards. The Quartz, OpenGL and User Interface Tests are all much better than I'd have expected from such a budget-end (although "silent" model card). And I've read that this particular card (Sapphire Radeon HD 2600 XT "Ultimate" 256MB GDDR3) doesn't perform quite as well as similar models from the same company, with the same chipset, etc, that do have a fan.

 

I have a lot of apps active now, so it's not a good time for running a new test without the HD part (though just for the heck of it, I did -- and the score with the hard drive option checked was about 20% lower and without the HD was about 40-50% higher than the overall score below). When you consider I'm running a value-for-money, quiet, low-power-consumption (for a mid-tower) system, with only a few extra frills (the E8400 is a nice processor and it's certainly a luxury to have over 2TB of internal drive storage), I truly have nothing to complain about. I hope this system will be able to run the next couple generations of OS X without choking, that I'll have the restraint to be happy with the software that runs well on it, if not, and that if I want a power boost that that can come as simply as a bit more RAM or some other minor upgrade. For now, when I look in Activity Monitor, most of the time my use is barely a fraction of capacity if I'm not doing some heavy video processing or something. Cool! :(

 

[b]Results	204.22[/b]	
System Info		
	Xbench Version		1.3
	[b]System Version		10.5.3 (9D34)[/b]
	Physical RAM		4096 MB
	Model		MacPro3,1
	Drive Type		WDC WD5000AACS-00ZUB0
[b]CPU Test	202.56[/b]	
	GCD Loop	350.48	18.47 Mops/sec
	Floating Point Basic	170.60	4.05 Gflop/sec
	vecLib FFT	141.35	4.66 Gflop/sec
	Floating Point Library	252.70	44.00 Mops/sec
[b]Thread Test	369.56[/b]	
	Computation	409.22	8.29 Mops/sec, 4 threads
	Lock Contention	336.91	14.49 Mlocks/sec, 4 threads
[b]Memory Test	236.72[/b]	
	System	269.52	
		Allocate	329.82	1.21 Malloc/sec
		Fill	226.34	11005.37 MB/sec
		Copy	271.68	5611.38 MB/sec
	Stream	211.04	
		Copy	196.76	4064.00 MB/sec
		Scale	203.64	4207.19 MB/sec
		Add	222.90	4748.27 MB/sec
		Triad	223.50	4781.31 MB/sec
[b]Quartz Graphics Test	297.85[/b]	
	Line	233.99	15.58 Klines/sec [50% alpha]
	Rectangle	314.85	94.00 Krects/sec [50% alpha]
	Circle	256.48	20.91 Kcircles/sec [50% alpha]
	Bezier	250.50	6.32 Kbeziers/sec [50% alpha]
	Text	691.46	43.25 Kchars/sec
[b]OpenGL Graphics Test	216.48[/b]	
	Spinning Squares	216.48	274.62 frames/sec
[b]User Interface Test	472.99[/b]	
	Elements	472.99	2.17 Krefresh/sec
[b]Disk Test	81.17[/b]	
	Sequential	124.53	
		Uncached Write	124.07	76.18 MB/sec [4K blocks]
		Uncached Write	114.94	65.03 MB/sec [256K blocks]
		Uncached Read	119.14	34.87 MB/sec [4K blocks]
		Uncached Read	143.53	72.14 MB/sec [256K blocks]
	Random	60.21	
		Uncached Write	23.78	2.52 MB/sec [4K blocks]
		Uncached Write	193.57	61.97 MB/sec [256K blocks]
		Uncached Read	83.26	0.59 MB/sec [4K blocks]
		Uncached Read	138.73	25.74 MB/sec [256K blocks]

Link to comment
Share on other sites

  • 2 weeks later...

Just finished my build.

 

Goals (in order):

1 - At least 500GB of redundant storage

2 - Extremely quiet

3 - Retail DVD for install, with as few modifications as possible - needed high compatibility, little fussing around

4 - Reasonable thermals

5 - Reasonable performance

 

 

Ended up with:

 

Intel Q6700 cooled by a Thermalright Ultra-120 eXtreme with a Nexus "Real Quiet" 120mm fan

Intel D975XBX2

nVidia 7300GT 256mb (obvious room for improvement, but this was free...)

2x2GB Corsair XMS2 DHX PC6400

1xWD VelociRaptor 300GB (Boot, Apps)

2XWD Caviar Blue 640GB (Data, in software Raid 1 array)

Couple more Nexus fans and a very quiet Seasonic 650W power supply

 

Installed Kalyway on a spare 120GB drive and used that as the "staging" area to install Chameleon EFI and Leopard, replaced a couple of kexts, patched the audio, and that's it. Even sleep works flawlessly.

 

The end result is practically silent, and for the icing on the cake, the CPU is idling along at around 38°C, while the hard drives are at around 32°. Core temperatures struggle to break 55°C in my 25°C room with 100% load. Not super impressive but given that I'm barely pushing 30CFM through the heatsink, it's OK with me!

 

Though it's not the latest and greatest, it is pretty darn zippy.

 

Here's the Xbench results:

 

Results 204.58 (240.65 without disk)

System Info

Xbench Version 1.3

System Version 10.5.3 (9D34)

Physical RAM 4096 MB

Model iMac7,1

Drive Type WDC WD3000GLFS-01F8U0

CPU Test 168.56

GCD Loop 315.52 16.63 Mops/sec

Floating Point Basic 153.44 3.65 Gflop/sec

vecLib FFT 123.80 4.08 Gflop/sec

Floating Point Library 167.60 29.18 Mops/sec

Thread Test 451.68

Computation 487.87 9.88 Mops/sec, 4 threads

Lock Contention 420.49 18.09 Mlocks/sec, 4 threads

Memory Test 192.69

System 206.12

Allocate 273.92 1.01 Malloc/sec

Fill 174.81 8499.58 MB/sec

Copy 192.92 3984.63 MB/sec

Stream 180.90

Copy 166.47 3438.31 MB/sec

Scale 169.28 3497.26 MB/sec

Add 195.34 4161.19 MB/sec

Triad 196.94 4213.09 MB/sec

Quartz Graphics Test 250.63

Line 202.60 13.49 Klines/sec [50% alpha]

Rectangle 269.90 80.58 Krects/sec [50% alpha]

Circle 216.08 17.61 Kcircles/sec [50% alpha]

Bezier 211.22 5.33 Kbeziers/sec [50% alpha]

Text 513.77 32.14 Kchars/sec

OpenGL Graphics Test 204.43

Spinning Squares 204.43 259.33 frames/sec

User Interface Test 409.98

Elements 409.98 1.88 Krefresh/sec

Disk Test 104.61

Sequential 173.72

Uncached Write 181.47 111.42 MB/sec [4K blocks]

Uncached Write 203.67 115.24 MB/sec [256K blocks]

Uncached Read 120.84 35.36 MB/sec [4K blocks]

Uncached Read 231.00 116.10 MB/sec [256K blocks]

Random 74.84

Uncached Write 26.66 2.82 MB/sec [4K blocks]

Uncached Write 255.41 81.77 MB/sec [256K blocks]

Uncached Read 134.57 0.95 MB/sec [4K blocks]

Uncached Read 218.08 40.47 MB/sec [256K blocks]

 

edit: now updated to 10.5.4 effortlessly via Software Update, and essentially no change to Xbench scores.

Link to comment
Share on other sites

Here is my build

 

Quad 6600 @ 2.8Ghz (7 * 400 FSB)

Crusail 2*2Gb DDR 800MHz ( 6_6_6_18 timing ;) )

AUSU p5kE

XFX 8800 GS 384Mb (580Mhz)

WD SE16 500Gb

 

Matlab 2007b

 

0.0907 0.2612 0.2040 1.0907 0.6125 0.7694

 

Xbench

Results 196.27 ( 257.35 no disk)

System Info

Xbench Version 1.3

System Version 10.5.3 (9D34)

Physical RAM 4096 MB

Model Mac Pro

Drive Type WDC WD5000AAKS-75YGA0

CPU Test 177.67

GCD Loop 330.50 17.42 Mops/sec

Floating Point Basic 160.51 3.81 Gflop/sec

vecLib FFT 127.78 4.22 Gflop/sec

Floating Point Library 175.21 30.51 Mops/sec

Thread Test 381.55

Computation 511.97 10.37 Mops/sec, 4 threads

Lock Contention 304.08 13.08 Mlocks/sec, 4 threads

Memory Test 218.52

System 252.15

Allocate 269.35 989.13 Kalloc/sec

Fill 226.38 11006.94 MB/sec

Copy 265.43 5482.42 MB/sec

Stream 192.81

Copy 180.64 3730.96 MB/sec

Scale 182.05 3761.18 MB/sec

Add 204.18 4349.43 MB/sec

Triad 207.49 4438.71 MB/sec

Quartz Graphics Test 281.76

Line 218.25 14.53 Klines/sec [50% alpha]

Rectangle 296.28 88.45 Krects/sec [50% alpha]

Circle 237.89 19.39 Kcircles/sec [50% alpha]

Bezier 229.53 5.79 Kbeziers/sec [50% alpha]

Text 647.29 40.49 Kchars/sec

OpenGL Graphics Test 186.67

Spinning Squares 186.67 236.80 frames/sec

User Interface Test 460.78

Elements 460.78 2.11 Krefresh/sec

Disk Test 81.49

Sequential 129.80

Uncached Write 126.24 77.51 MB/sec [4K blocks]

Uncached Write 125.31 70.90 MB/sec [256K blocks]

Uncached Read 124.23 36.36 MB/sec [4K blocks]

Uncached Read 145.64 73.20 MB/sec [256K blocks]

Random 59.39

Uncached Write 22.59 2.39 MB/sec [4K blocks]

Uncached Write 154.29 49.39 MB/sec [256K blocks]

Uncached Read 98.29 0.70 MB/sec [4K blocks]

Uncached Read 155.29 28.82 MB/sec [256K blocks]

Link to comment
Share on other sites

Pentium D 2.8Ghz dual

3mb Ram

Dell E520 November 2006

 

Not sure what most of this is, but from the look of other scores I have a somewhat below average result.

 

Results 99.21

System Info

Xbench Version 1.3

System Version 10.5.3 (9D34)

Physical RAM 3072 MB

Model MacPro3,1

Drive Type ST3160812AS ST3160812AS

CPU Test 67.24

GCD Loop 84.22 4.44 Mops/sec

Floating Point Basic 70.89 1.68 Gflop/sec

vecLib FFT 43.03 1.42 Gflop/sec

Floating Point Library 97.37 16.95 Mops/sec

Thread Test 136.20

Computation 134.90 2.73 Mops/sec, 4 threads

Lock Contention 137.52 5.92 Mlocks/sec, 4 threads

Memory Test 119.47

System 123.18

Allocate 117.83 432.69 Kalloc/sec

Fill 124.37 6047.18 MB/sec

Copy 127.78 2639.18 MB/sec

Stream 115.98

Copy 113.40 2342.29 MB/sec

Scale 114.91 2374.06 MB/sec

Add 118.02 2514.04 MB/sec

Triad 117.70 2517.84 MB/sec

Quartz Graphics Test 179.41

Line 212.52 14.15 Klines/sec [50% alpha]

Rectangle 171.69 51.26 Krects/sec [50% alpha]

Circle 165.79 13.51 Kcircles/sec [50% alpha]

Bezier 125.76 3.17 Kbeziers/sec [50% alpha]

Text 297.99 18.64 Kchars/sec

OpenGL Graphics Test 113.54

Spinning Squares 113.54 144.03 frames/sec

User Interface Test 142.08

Elements 142.08 652.07 refresh/sec

Disk Test 53.89

Sequential 105.49

Uncached Write 76.65 47.06 MB/sec [4K blocks]

Uncached Write 120.64 68.26 MB/sec [256K blocks]

Uncached Read 105.00 30.73 MB/sec [4K blocks]

Uncached Read 141.69 71.21 MB/sec [256K blocks]

Random 36.19

Uncached Write 12.03 1.27 MB/sec [4K blocks]

Uncached Write 103.76 33.22 MB/sec [256K blocks]

Uncached Read 92.03 0.65 MB/sec [4K blocks]

Uncached Read 145.34 26.97 MB/sec [256K blocks]

Link to comment
Share on other sites

  • 2 weeks later...

My build on 10.5.2

 

C2D E6420 @3.6G (450x8) cooled by Thermalright 120 Extreme

DFI Inf 965-S Dark, NB+SB cooled by TT Spirit II

2x1Gb Team Xtreme PC8500 (Micron based chip)@450 4-4-4-10 2.1V :( cooled by OCZ xtc

Prolink 7950GT 256Mb mod to 7900GTX clock (650/1600), cooled by Zalman Fatality FV7

Mac partition on WD Raptor 74Gb

Powered by Corsair VX550

Thermaltake Armor with 2x12cm, 2x8cm and 1x25cm Fan

 

My result is 221.23 :) . I'll try with raid-0 soon

post-223308-1215345141_thumb.jpg

Link to comment
Share on other sites

 Share

×
×
  • Create New...