x86 Xbench Results Thread

aberracus · October 18, 2006

well I didn't look through all 25 pages but I think My little pc is doing ok. I got a score of 156.22

I'll get my sig put up here soon but until then.

intel e6600@3.4Ghz

Intel 975xbx rev 305 mobo

patriot 667mhz ram @ ~775mhz

ati x1950 xtx graphics card

and seagate sata 3g/sec HD 320 gigs

I just installed the os and ran the test. I'll post again after I've tweaked the system some.

Davicnhi what you p[osted in your "post" was 156 your real results are 165 wich is way better copnsidering my system is much economic than yoours and my xbenchs are around 155

Cheers

Davinchy · October 18, 2006

yeah I'm working on getting my HD score up. The randoms are scoring extremely low. I am trying to get at least some soft raid working. If I had hard drive scores equal to my other scores I'd be in the 200's I think.

P.S. I only built my pc with osx as a second priority It is mainly a windows gaming machine until things change in the os x gaming market I'm just happy it plays so nice with os x.

-jordn- · October 24, 2006

thought id share my score too!

Im running the JaS 10.4.7 image, then upgraded to 10.4.8 via that update that was going around. runs like a dream. under windows, the constant disk thrashing was making them heat up to 45-50 degrees C. since OSX turns off the disks when they are idle, neither of them go over 30 degrees. Most stuff is recoginised on my MSI K8N Neo-F; Nforce PATA and SATA (SATA not tested, recognised tho!) AC97 audio, USB 2.0, Bluetooth (wirelessly syncing PIM information with my nokia n70!) The AMD 3200+ (venice, SSE3) is acting strangley, it has had the SSE3 patch applied but it still doesnt show it in System Profiler. i believe it to be running at stock speed (2.01Ghz) because it is running at 27 degrees C with air cooling. System Profiler reckons its running at 3Ghz...

Didnt bother doing Quartz/CI tests, i have an Nvidia 6800XT w/256GDDR3 (reflashed to 6800)

anyway, enough chatter, heres the results!

Results 73.27

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 1024 MB

Model ADP2,1

Drive Type Maxtor 6L080L0

CPU Test 66.41

GCD Loop 107.97 5.69 Mops/sec

Floating Point Basic 71.92 1.71 Gflop/sec

vecLib FFT 41.97 1.38 Gflop/sec

Floating Point Library 75.52 13.15 Mops/sec

Thread Test 71.17

Computation 49.84 1.01 Mops/sec, 4 threads

Lock Contention 124.41 5.35 Mlocks/sec, 4 threads

Memory Test 75.56

System 76.90

Allocate 149.36 548.51 Kalloc/sec

Fill 67.43 3278.43 MB/sec

Copy 57.18 1181.10 MB/sec

Stream 74.27

Copy 71.65 1479.98 MB/sec

Scale 71.58 1478.82 MB/sec

Add 77.29 1646.55 MB/sec

Triad 76.94 1646.04 MB/sec

User Interface Test 138.45

Elements 138.45 635.40 refresh/sec

Disk Test 53.56

Sequential 93.31

Uncached Write 80.58 49.47 MB/sec [4K blocks]

Uncached Write 85.54 48.40 MB/sec [256K blocks]

Uncached Read 117.97 34.53 MB/sec [4K blocks]

Uncached Read 97.16 48.83 MB/sec [256K blocks]

Random 37.56

Uncached Write 14.74 1.56 MB/sec [4K blocks]

Uncached Write 62.01 19.85 MB/sec [256K blocks]

Uncached Read 76.17 0.54 MB/sec [4K blocks]

Uncached Read 106.39 19.74 MB/sec [256K blocks]

matemago · October 25, 2006

this is my new osx86 box, in my results are this:

Results 104.55

System Info

Xbench Version 1.3

System Version 10.4.6 (8I1119)

Physical RAM 1024 MB

Model ADP2,1

Drive Type ST3250820AS

CPU Test 71.07

GCD Loop 93.99 4.95 Mops/sec

Floating Point Basic 81.06 1.93 Gflop/sec

vecLib FFT 52.84 1.74 Gflop/sec

Floating Point Library 69.54 12.11 Mops/sec

Thread Test 172.81

Computation 155.01 3.14 Mops/sec, 4 threads

Lock Contention 195.22 8.40 Mlocks/sec, 4 threads

Memory Test 116.24

System 99.98

Allocate 69.70 255.98 Kalloc/sec

Fill 140.76 6844.31 MB/sec

Copy 116.90 2414.54 MB/sec

Stream 138.82

Copy 133.44 2756.24 MB/sec

Scale 136.73 2824.86 MB/sec

Add 143.25 3051.47 MB/sec

Triad 142.33 3044.73 MB/sec

Quartz Graphics Test 109.91

Line 107.11 7.13 Klines/sec [50% alpha]

Rectangle 106.72 31.86 Krects/sec [50% alpha]

Circle 104.68 8.53 Kcircles/sec [50% alpha]

Bezier 107.48 2.71 Kbeziers/sec [50% alpha]

Text 126.14 7.89 Kchars/sec

OpenGL Graphics Test 191.89

Spinning Squares 191.89 243.43 frames/sec

User Interface Test 184.98

Elements 184.98 848.94 refresh/sec

Disk Test 53.24

Sequential 131.86

Uncached Write 144.64 88.81 MB/sec [4K blocks]

Uncached Write 131.16 74.21 MB/sec [256K blocks]

Uncached Read 111.35 32.59 MB/sec [4K blocks]

Uncached Read 146.70 73.73 MB/sec [256K blocks]

Random 33.35

Uncached Write 11.23 1.19 MB/sec [4K blocks]

Uncached Write 77.63 24.85 MB/sec [256K blocks]

Uncached Read 90.76 0.64 MB/sec [4K blocks]

Uncached Read 143.63 26.65 MB/sec [256K blocks]

my box has a ASUS P5DL2-VM SE mobo with 1Ghz PC4200 Kingston RAM and a 250GB

SEAGATE HD. it has a Intel D820 cpu oveclocked just 10%.

installation was pretty simple, just patched Azalia audio.

everything runs pretty good, no problems. FrontRow working.

iMäcen · October 27, 2006

44.47 with my Riva TNT 2 PCI card.

DistantHoller · October 29, 2006

Here are my results from my very own humble no-name Hackintosh!

Machine Model: ADP2,1

CPU Type: Intel® Pentium® 4 CPU

Number Of CPUs: 2

CPU Speed: 3.6 GHz

L2 Cache (per CPU): 512 KB

Memory: 1 GB

Bus Speed: 800 MHz

Chipset Model: Radeon X700 (PCIE)

Type: Display

Bus: PCI (Really AGP!)

VRAM (Total): 128 MB

Vendor: ATI (0x1002)

Device ID: 0x5e4d

Revision ID: 0x0000

Displays:

Color LCD:

Resolution: 1440 x 900 @ 60 Hz

Depth: 32-bit Color

Core Image: Not Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

Results 74.88

System Info

Xbench Version 1.3

System Version 10.4.6 (8I1119)

Physical RAM 1024 MB

Model ADP2,1

Drive Type Maxtor 6Y160M0

CPU Test 64.33

GCD Loop 110.66 5.83 Mops/sec

Floating Point Basic 63.01 1.50 Gflop/sec

vecLib FFT 42.48 1.40 Gflop/sec

Floating Point Library 72.80 12.68 Mops/sec

Thread Test 99.50

Computation 107.61 2.18 Mops/sec, 4 threads

Lock Contention 92.52 3.98 Mlocks/sec, 4 threads

Memory Test 85.51

System 68.46

Allocate 53.31 195.77 Kalloc/sec

Fill 75.07 3649.95 MB/sec

Copy 85.17 1759.12 MB/sec

Stream 113.87

Copy 107.22 2214.52 MB/sec

Scale 107.01 2210.87 MB/sec

Add 121.79 2594.31 MB/sec

Triad 121.30 2594.85 MB/sec

Quartz Graphics Test 57.80

Line 56.21 3.74 Klines/sec [50% alpha]

Rectangle 56.35 16.82 Krects/sec [50% alpha]

Circle 54.28 4.42 Kcircles/sec [50% alpha]

Bezier 81.36 2.05 Kbeziers/sec [50% alpha]

Text 49.36 3.09 Kchars/sec

OpenGL Graphics Test 111.51

Spinning Squares 111.51 141.46 frames/sec

User Interface Test 70.05

Elements 70.05 321.50 refresh/sec

Disk Test 63.91

Sequential 72.56

Uncached Write 41.60 25.54 MB/sec [4K blocks]

Uncached Write 107.98 61.10 MB/sec [256K blocks]

Uncached Read 88.81 25.99 MB/sec [4K blocks]

Uncached Read 94.64 47.57 MB/sec [256K blocks]

Random 57.11

Uncached Write 22.50 2.38 MB/sec [4K blocks]

Uncached Write 132.61 42.45 MB/sec [256K blocks]

Uncached Read 91.53 0.65 MB/sec [4K blocks]

Uncached Read 140.25 26.02 MB/sec [256K blocks]

Atmosfear · October 30, 2006

Score 152.74

Specs:

Proc: Core 2 Duo E6600 2.4GHz (no OC yet)

MoBo: Asrock Conroe-XFire-eSATAII (i945P)

Memory: 4x1GB GeiL DDR2-800@DDR2-667-5-5-5-15 (4GB)

Drice: Maxtor 6Y200M0 7200RPM 160GB SATA150

Video: Sapphire X1900 XT 256MB (Borisbadenov, 1920x1200x32)

Around 192 pts without HDD Test. Actually I think the benchmark is useless unless it implements full intel acceleration (SSE etc.) and the disk bench is also pretty poor (getting worth scores on 1.5TB RAID5 of Highpoint RocketRaid 2320 w/4xWD 500GB RE2 drives).

xbench_nonoc_max200gb.txt

New001 · October 31, 2006

iMac (see specs) with new HDD (Maxtor 300GB 7200RPM 16MB):

Results	151.48	
System Info		
	Xbench Version		1.3
	System Version		10.4.7 (8K1106)
	Physical RAM		1024 MB
	Model		iMac5,1
	Drive Type		Maxtor 6L300S0
CPU Test	112.54	
	GCD Loop	255.24	13.45 Mops/sec
	Floating Point Basic	121.80	2.89 Gflop/sec
	vecLib FFT	91.33	3.01 Gflop/sec
	Floating Point Library	80.22	13.97 Mops/sec
Thread Test	211.06	
	Computation	194.81	3.95 Mops/sec, 4 threads
	Lock Contention	230.26	9.91 Mlocks/sec, 4 threads
Memory Test	127.83	
	System	131.03	
		Allocate	125.61	461.28 Kalloc/sec
		Fill	129.71	6306.94 MB/sec
		Copy	138.42	2858.98 MB/sec
	Stream	124.79	
		Copy	116.27	2401.51 MB/sec
		Scale	120.40	2487.36 MB/sec
		Add	131.42	2799.62 MB/sec
		Triad	132.65	2837.70 MB/sec
Quartz Graphics Test	138.14	
	Line	128.47	8.55 Klines/sec [50% alpha]
	Rectangle	156.49	46.72 Krects/sec [50% alpha]
	Circle	151.71	12.37 Kcircles/sec [50% alpha]
	Bezier	142.55	3.60 Kbeziers/sec [50% alpha]
	Text	118.82	7.43 Kchars/sec
OpenGL Graphics Test	151.62	
	Spinning Squares	151.62	192.34 frames/sec
User Interface Test	432.05	
	Elements	432.05	1.98 Krefresh/sec
Disk Test	116.07	
	Sequential	120.98	
		Uncached Write	129.47	79.49 MB/sec [4K blocks]
		Uncached Write	110.22	62.36 MB/sec [256K blocks]
		Uncached Read	122.99	35.99 MB/sec [4K blocks]
		Uncached Read	122.92	61.78 MB/sec [256K blocks]
	Random	111.54	
		Uncached Write	106.16	11.24 MB/sec [4K blocks]
		Uncached Write	113.74	36.41 MB/sec [256K blocks]
		Uncached Read	102.17	0.72 MB/sec [4K blocks]
		Uncached Read	127.18	23.60 MB/sec [256K blocks]

fabioxx · November 1, 2006

with the system in sign and new 10.4.8 and new kernel, plus a light OC to the prescott (3,3 ghz), I have this results, can you explain if it's ok for my system? how can I test if new kernel is faster (which application)?

Thank you and bye.

P.S. I cannot run OpenGl test otherwise xbench crashes, so I unchecked it and run the bench.

Results 73.20

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 1024 MB

Model ACPI

Drive Type Maxtor 6E040L0

CPU Test 57.79

GCD Loop 90.63 4.78 Mops/sec

Floating Point Basic 62.34 1.48 Gflop/sec

vecLib FFT 36.80 1.21 Gflop/sec

Floating Point Library 66.84 11.64 Mops/sec

Thread Test 98.43

Computation 78.61 1.59 Mops/sec, 4 threads

Lock Contention 131.60 5.66 Mlocks/sec, 4 threads

Memory Test 106.91

System 90.44

Allocate 66.19 243.07 Kalloc/sec

Fill 116.45 5662.21 MB/sec

Copy 105.55 2180.14 MB/sec

Stream 130.70

Copy 130.96 2704.97 MB/sec

Scale 132.86 2744.85 MB/sec

Add 130.23 2774.09 MB/sec

Triad 128.83 2756.09 MB/sec

Quartz Graphics Test 74.60

Line 71.03 4.73 Klines/sec [50% alpha]

Rectangle 68.99 20.60 Krects/sec [50% alpha]

Circle 68.09 5.55 Kcircles/sec [50% alpha]

Bezier 88.14 2.22 Kbeziers/sec [50% alpha]

Text 80.51 5.04 Kchars/sec

User Interface Test 109.69

Elements 109.69 503.44 refresh/sec

Disk Test 44.20

Sequential 65.68

Uncached Write 32.86 20.18 MB/sec [4K blocks]

Uncached Write 92.77 52.49 MB/sec [256K blocks]

Uncached Read 100.53 29.42 MB/sec [4K blocks]

Uncached Read 102.61 51.57 MB/sec [256K blocks]

Random 33.30

Uncached Write 11.95 1.27 MB/sec [4K blocks]

Uncached Write 74.54 23.86 MB/sec [256K blocks]

Uncached Read 71.10 0.50 MB/sec [4K blocks]

Uncached Read 111.43 20.68 MB/sec [256K blocks]

guyin916 · November 1, 2006

with the system in sign and new 10.4.8 and new kernel, plus a light OC to the prescott (3,3 ghz), I have this results, can you explain if it's ok for my system? how can I test if new kernel is faster (which application)?
Thank you and bye.

P.S. I cannot run OpenGl test otherwise xbench crashes, so I unchecked it and run the bench.

you almost got beat by a Celeron M =)

stanleymail · November 2, 2006

Here is my result

Results 152.40

System Info

Xbench Version 1.3

System Version 10.4.7 (8J2135)

Physical RAM 4096 MB

Model ADP2,1

Drive Type HDS728080PLA380

CPU Test 131.53

GCD Loop 317.99 16.76 Mops/sec

Floating Point Basic 153.24 3.64 Gflop/sec

vecLib FFT 92.60 3.05 Gflop/sec

Floating Point Library 100.58 17.51 Mops/sec

Thread Test 269.36

Computation 245.54 4.97 Mops/sec, 4 threads

Lock Contention 298.28 12.83 Mlocks/sec, 4 threads

Memory Test 188.95

System 166.54

Allocate 120.22 441.47 Kalloc/sec

Fill 215.98 10501.48 MB/sec

Copy 197.43 4077.90 MB/sec

Stream 218.32

Copy 216.77 4477.36 MB/sec

Scale 214.12 4423.64 MB/sec

Add 226.08 4815.96 MB/sec

Triad 216.67 4635.02 MB/sec

Quartz Graphics Test 198.88

Line 165.87 11.04 Klines/sec [50% alpha]

Rectangle 207.74 62.02 Krects/sec [50% alpha]

Circle 199.01 16.22 Kcircles/sec [50% alpha]

Bezier 182.03 4.59 Kbeziers/sec [50% alpha]

Text 264.57 16.55 Kchars/sec

OpenGL Graphics Test 212.88

Spinning Squares 212.88 270.05 frames/sec

User Interface Test 402.16

Elements 402.16 1.85 Krefresh/sec

Disk Test 58.44

Sequential 98.30

Uncached Write 97.11 59.63 MB/sec [4K blocks]

Uncached Write 86.97 49.21 MB/sec [256K blocks]

Uncached Read 116.94 34.22 MB/sec [4K blocks]

Uncached Read 96.66 48.58 MB/sec [256K blocks]

Random 41.58

Uncached Write 15.22 1.61 MB/sec [4K blocks]

Uncached Write 88.95 28.48 MB/sec [256K blocks]

Uncached Read 88.73 0.63 MB/sec [4K blocks]

Uncached Read 125.03 23.20 MB/sec [256K blocks]

THIS IS MY FIRST POST IN FORUM :dev:

OSX 10.4.7

CPU Core2 intel 6300 1.8G (OVERCLOCK TO 2.6G 384X7)

RAM 4G TRENSEND 533

Board MSI 975 PLATINUM POWERUP EDITION (South chip ICH7DH)

Graphic ASUS X1600XT SILENT

Sound M-AUDIO Transit USB 24BIT (Good)

4 SATAPORT WORK

greenman100 · November 5, 2006

here you are.

Results	326.85	
System Info		
	Xbench Version		1.3
	System Version		10.4.6 (8I1119)
	Physical RAM		2048 MB
	Model		ADP2,1
	Drive Type		Apple read/write
CPU Test	177.72	
	GCD Loop	425.02	22.40 Mops/sec
	Floating Point Basic	203.73	4.84 Gflop/sec
	vecLib FFT	128.25	4.23 Gflop/sec
	Floating Point Library	134.25	23.38 Mops/sec
Thread Test	362.38	
	Computation	331.08	6.71 Mops/sec, 4 threads
	Lock Contention	400.20	17.22 Mlocks/sec, 4 threads
Memory Test	225.29	
	System	225.20	
		Allocate	165.55	607.97 Kalloc/sec
		Fill	270.63	13158.67 MB/sec
		Copy	278.86	5759.75 MB/sec
	Stream	225.37	
		Copy	199.60	4122.67 MB/sec
		Scale	202.87	4191.29 MB/sec
		Add	256.70	5468.31 MB/sec
		Triad	255.53	5466.38 MB/sec
Quartz Graphics Test	295.37	
	Line	224.12	14.92 Klines/sec [50% alpha]
	Rectangle	277.30	82.79 Krects/sec [50% alpha]
	Circle	266.37	21.71 Kcircles/sec [50% alpha]
	Bezier	242.49	6.12 Kbeziers/sec [50% alpha]
	Text	1018.25	63.70 Kchars/sec
OpenGL Graphics Test	293.94	
	Spinning Squares	293.94	372.87 frames/sec
User Interface Test	763.22	
	Elements	763.22	3.50 Krefresh/sec
Disk Test	2026.73	
	Sequential	1277.15	
		Uncached Write	923.09	566.77 MB/sec [4K blocks]
		Uncached Write	2755.81	1559.24 MB/sec [256K blocks]
		Uncached Read	688.27	201.42 MB/sec [4K blocks]
		Uncached Read	4294.31	2158.29 MB/sec [256K blocks]
	Random	4906.39	
		Uncached Write	2029.16	214.81 MB/sec [4K blocks]
		Uncached Write	4940.01	1581.48 MB/sec [256K blocks]
		Uncached Read	26935.86	190.88 MB/sec [4K blocks]
		Uncached Read	12063.75	2238.51 MB/sec [256K blocks]

guyin916 · November 5, 2006

here you are.

Results	326.85	
	Drive Type		Apple read/write

how about a test with your hard drive instead of ram drive? oooooooooh.. got caught

greenman100 · November 6, 2006

how about a test with your hard drive instead of ram drive? oooooooooh.. got caught

everyone on xbench.com posts with ramdisks, so I did the same. I just cut and pasted. my true disk score is in the 70s

Midral · November 7, 2006

http://db.xbench.com/merge.xhtml?doc2=177652

1st in Pentium M 7xx Category :poster_oops:

guyin916 · November 7, 2006

i'm not fooling anyone, i swear! i got 71 on xbench on my celeron m 1.5ghz. perhaps it's the 1.26 gigs of ram and 5400 rpm seagate hard drive.... *shrugs*..... shouldn't a pentium m 1.73 beat a celeron m 1.5?

zztodd350 · November 8, 2006

Not bad for a Dell e1705, cant wait until the dual core works

specs:

2.16/4M Intel running single core

7900gs with the titan kext - Thank you so much!

Results 125.11

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 2048 MB

Model ACPI

Drive Type HTS721010G9SA00

CPU Test 125.10

GCD Loop 304.26 16.04 Mops/sec

Floating Point Basic 137.42 3.27 Gflop/sec

vecLib FFT 92.20 3.04 Gflop/sec

Floating Point Library 94.66 16.48 Mops/sec

Thread Test 161.72

Computation 119.71 2.43 Mops/sec, 4 threads

Lock Contention 249.17 10.72 Mlocks/sec, 4 threads

Memory Test 151.62

System 148.41

Allocate 133.85 491.56 Kalloc/sec

Fill 152.07 7393.87 MB/sec

Copy 162.16 3349.26 MB/sec

Stream 154.97

Copy 142.69 2947.12 MB/sec

Scale 147.94 3056.38 MB/sec

Add 165.75 3530.93 MB/sec

Triad 166.39 3559.52 MB/sec

Quartz Graphics Test 210.52

Line 149.66 9.96 Klines/sec [50% alpha]

Rectangle 203.43 60.74 Krects/sec [50% alpha]

Circle 194.68 15.87 Kcircles/sec [50% alpha]

Bezier 175.65 4.43 Kbeziers/sec [50% alpha]

Text 755.36 47.25 Kchars/sec

OpenGL Graphics Test 183.17

Spinning Squares 183.17 232.36 frames/sec

User Interface Test 551.39

Elements 551.39 2.53 Krefresh/sec

Disk Test 43.19

Sequential 92.59

Uncached Write 99.75 61.24 MB/sec [4K blocks]

Uncached Write 102.28 57.87 MB/sec [256K blocks]

Uncached Read 66.65 19.51 MB/sec [4K blocks]

Uncached Read 119.08 59.85 MB/sec [256K blocks]

Random 28.16

Uncached Write 8.90 0.94 MB/sec [4K blocks]

Uncached Write 89.49 28.65 MB/sec [256K blocks]

Uncached Read 90.52 0.64 MB/sec [4K blocks]

Uncached Read 134.00 24.86 MB/sec [256K blocks]

fabioxx · November 10, 2006

with the system in sign and new 10.4.8 and new kernel, plus a light OC to the prescott (3,3 ghz), I have this results, can you explain if it's ok for my system? how can I test if new kernel is faster (which application)?
Thank you and bye.

P.S. I cannot run OpenGl test otherwise xbench crashes, so I unchecked it and run the bench.

Results 73.20

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 1024 MB

Model ACPI

Drive Type Maxtor 6E040L0

CPU Test 57.79

GCD Loop 90.63 4.78 Mops/sec

Floating Point Basic 62.34 1.48 Gflop/sec

vecLib FFT 36.80 1.21 Gflop/sec

Floating Point Library 66.84 11.64 Mops/sec

Thread Test 98.43

Computation 78.61 1.59 Mops/sec, 4 threads

Lock Contention 131.60 5.66 Mlocks/sec, 4 threads

Memory Test 106.91

System 90.44

Allocate 66.19 243.07 Kalloc/sec

Fill 116.45 5662.21 MB/sec

Copy 105.55 2180.14 MB/sec

Stream 130.70

Copy 130.96 2704.97 MB/sec

Scale 132.86 2744.85 MB/sec

Add 130.23 2774.09 MB/sec

Triad 128.83 2756.09 MB/sec

Quartz Graphics Test 74.60

Line 71.03 4.73 Klines/sec [50% alpha]

Rectangle 68.99 20.60 Krects/sec [50% alpha]

Circle 68.09 5.55 Kcircles/sec [50% alpha]

Bezier 88.14 2.22 Kbeziers/sec [50% alpha]

Text 80.51 5.04 Kchars/sec

User Interface Test 109.69

Elements 109.69 503.44 refresh/sec

Disk Test 44.20

Sequential 65.68

Uncached Write 32.86 20.18 MB/sec [4K blocks]

Uncached Write 92.77 52.49 MB/sec [256K blocks]

Uncached Read 100.53 29.42 MB/sec [4K blocks]

Uncached Read 102.61 51.57 MB/sec [256K blocks]

Random 33.30

Uncached Write 11.95 1.27 MB/sec [4K blocks]

Uncached Write 74.54 23.86 MB/sec [256K blocks]

Uncached Read 71.10 0.50 MB/sec [4K blocks]

Uncached Read 111.43 20.68 MB/sec [256K blocks]

i've installed new kernel, now my new score is the following, does it is better?

bye

nuovotest.txt

zYphrist · November 16, 2006

Compaq Presario SR1430NX

Intel Pentium 4 2.93 GHz

512 MB DDR2 RAM

Onboard Sound, Onboard Intel GMA900

OS X 10.4.6 + JaS 10.4.8 combo update (Kernel 8.4.1)

---

Results 87.07

XBench_Result___87.07.txt

tivimac · November 17, 2006

Results 97.70

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 1024 MB

Model ACPI

Drive Type Maxtor 6Y120M0

CPU Test 68.95

GCD Loop 97.23 5.13 Mops/sec

Floating Point Basic 77.58 1.84 Gflop/sec

vecLib FFT 47.94 1.58 Gflop/sec

Floating Point Library 71.51 12.45 Mops/sec

Thread Test 104.22

Computation 84.22 1.71 Mops/sec, 4 threads

Lock Contention 136.65 5.88 Mlocks/sec, 4 threads

Memory Test 96.88

System 90.68

Allocate 61.91 227.34 Kalloc/sec

Fill 123.41 6000.24 MB/sec

Copy 113.30 2340.15 MB/sec

Stream 104.00

Copy 101.00 2086.17 MB/sec

Scale 103.55 2139.34 MB/sec

Add 106.55 2269.72 MB/sec

Triad 105.04 2247.07 MB/sec

Quartz Graphics Test 118.19

Line 104.66 6.97 Klines/sec [50% alpha]

Rectangle 99.67 29.76 Krects/sec [50% alpha]

Circle 99.34 8.10 Kcircles/sec [50% alpha]

Bezier 103.98 2.62 Kbeziers/sec [50% alpha]

Text 329.88 20.64 Kchars/sec

OpenGL Graphics Test 202.55

Spinning Squares 202.55 256.95 frames/sec

User Interface Test 159.00

Elements 159.00 729.71 refresh/sec

Disk Test 57.02

Sequential 70.79

Uncached Write 62.96 38.66 MB/sec [4K blocks]

Uncached Write 65.23 36.91 MB/sec [256K blocks]

Uncached Read 91.94 26.91 MB/sec [4K blocks]

Uncached Read 69.38 34.87 MB/sec [256K blocks]

Random 47.73

Uncached Write 19.26 2.04 MB/sec [4K blocks]

Uncached Write 94.38 30.21 MB/sec [256K blocks]

Uncached Read 84.84 0.60 MB/sec [4K blocks]

Uncached Read 105.21 19.52 MB/sec [256K blocks]

ASUS P5GD1-VM

Hardware Overview:

Machine Name: Mac

Machine Model: ACPI

CPU Type: Intel® Pentium® 4 CPU

Number Of CPUs: 1

CPU Speed: 3.2 GHz

L2 Cache (per CPU): 2 MB

CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL EST CID CX16 TPR

Memory: 1 GB DDR333

Bus Speed: 800 MHz

Intel GMA 900:

Bus: Built-In

VRAM (Total): 64 MB of shared system memory

Vendor: Intel (0x8086)

DELL M782:

Resolution: 1280 x 1024 @ 75 Hz

Depth: 32-bit Color

Core Image: Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

mac.nub · November 17, 2006

Final Result 82.32

System specs as below.

Results attached in text format.

Intel GMA 950:

Chipset Model: GMA 950

Type: Display

Bus: Built-In

VRAM (Total): 64 MB of shared system memory

Vendor: Intel (0x8086)

Device ID: 0x27a2

Revision ID: 0x0003

Displays:

Display:

Resolution: 1280 x 800

Depth: 32-bit Color

Built-In: Yes

Core Image: Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz 2D Extreme: Supported

Quartz Extreme: Supported

Display:

Status: No display connected

Hard drive let me down

Xbench.txt

Nailson The Brazilian · November 17, 2006

hey guy,

where can i find the sse3 > sse2 patch?, i spending hours and i can`t find!

if you can help, just mail me...

my mail is:

nailsonlinux@gmail.com

thanks

amdhac · November 22, 2006

Results: 89.47

Athlon64 3200+ (Venice)

Asus A8N-E (NForce4 Chip)

RAM 2 G

EVGA 6600GT 128mb

120G Western Dig ATA

Pioneer 110D dvd

C-Media sound

Realtek ethernet

Everything works :blowup:

xbench.txt

vizual.menace · November 23, 2006

Results 46.69

System Info

Xbench Version 1.2

System Version 10.4.7 (8J2135)

Physical RAM 512 MB

Model ADP2,1

Drive Type SAMSUNG MP0402H

CPU Test 47.00

GCD Loop 223.78 11.80 Mops/sec

Floating Point Basic 28.73 682.74 Mflop/sec

vecLib FFT 35.41 1.17 Gflop/sec

Floating Point Library 56.81 9.89 Mops/sec

Thread Test 91.88

Computation 69.60 1.41 Mops/sec, 4 threads

Lock Contention 135.14 5.81 Mlocks/sec, 4 threads

Memory Test 55.19

System 65.39

Allocate 71.78 263.58 Kalloc/sec

Fill 65.57 3188.17 MB/sec

Copy 59.91 1237.35 MB/sec

Stream 47.74

Copy 45.35 936.69 MB/sec

Scale 46.48 960.27 MB/sec

Add 49.49 1054.32 MB/sec

Triad 49.94 1068.31 MB/sec

Quartz Graphics Test 51.10

Line 44.74 2.98 Klines/sec [50% alpha]

Rectangle 41.35 12.35 Krects/sec [50% alpha]

Circle 40.54 3.30 Kcircles/sec [50% alpha]

Bezier 75.68 1.91 Kbeziers/sec [50% alpha]

Text 74.43 4.66 Kchars/sec

OpenGL Graphics Test 147.78

Spinning Squares 147.78 187.47 frames/sec

User Interface Test 30.48

Elements 30.48 139.88 refresh/sec

Disk Test 24.69

Sequential 41.70

Uncached Write 38.96 23.92 MB/sec [4K blocks]

Uncached Write 37.40 21.16 MB/sec [256K blocks]

Uncached Read 52.43 15.34 MB/sec [4K blocks]

Uncached Read 40.89 20.55 MB/sec [256K blocks]

Random 17.53

Uncached Write 5.82 0.62 MB/sec [4K blocks]

Uncached Write 46.15 14.78 MB/sec [256K blocks]

Uncached Read 52.15 0.37 MB/sec [4K blocks]

Uncached Read 64.47 11.96 MB/sec [256K blocks]

micato · November 24, 2006

25% more faster using Kernel Beta 7.

This board is a old Intel 865 Perl, 2.8 Ghz, 1 GB DDR 333

x86 Xbench Results Thread

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites