Jump to content

x86 Xbench Results Thread

Sam0r

By Sam0r,
in Benchmarks

 Share
1,168 posts in this topic

Recommended Posts

kerimeton
kerimeton
Posted
Posted

I disabled Beamsync, ITS AWESOME NOW.

 

cept this

 

benchmark with HDD

42.50 - better then before, good, considering this is a low low end comptuer

benchmark without HDD

85 - AHHHHH HOLY {censored}.

 

see, on one, jsut one of the HDD tests, the "random" writing, first one (blocks of 4K) I always score 1.24, WTH, the other tests are fine. that drags my whole score down.

 

anyone have a solution, id rather have 85 then 42

Link to comment
Share on other sites
guyin916
guyin916
Posted
Posted
I disabled Beamsync, ITS AWESOME NOW.

 

cept this

 

benchmark with HDD

42.50 - better then before, good, considering this is a low low end comptuer

benchmark without HDD

85 - AHHHHH HOLY {censored}.

 

see, on one, jsut one of the HDD tests, the "random" writing, first one (blocks of 4K) I always score 1.24, WTH, the other tests are fine. that drags my whole score down.

 

anyone have a solution, id rather have 85 then 42

 

your score will never be 85 even with the world's fastest hard drive on your current setup.. you can get a boost by enabling quartzextreme though. i'm using a celeron m 1.5 ghz, 1.25 gb ram (ddr2 400fsb), 40gb hd 5400 rpm, i915 chipset, 900gma graphics... i get 60.36 on xbench. i'm going to be installing a pentium m 1.5 ghz and overclocking it to 2.0 ghz =D that'll boost it up big time =) but in your case, faster memory and faster processor will boost your scores.. hard drive won't boost it much.

Link to comment
Share on other sites
kerimeton
kerimeton
Posted
Posted

on of my hardrive scores is 1.24

1.24, of course its dragging evything down.

my openGL scores and graphics test are all in the 70's and 100's, smae with the rest. this one single section of the hardrive test gives me a 1.24 and you immeditly see the score drop

Link to comment
Share on other sites
MustardTheoRy
MustardTheoRy
Posted
Posted

well honestly not one macintel with disk unchecked will come close to that score. except a dual xeon 3GHz mac, I used temporary slow HDD and will have a new WD SATA HDD then ill include disk benching tomorrow, my score with the slow HDD was 183. I figured somone would run xbench with out disk benching selected and see the raw power in comparison.

Link to comment
Share on other sites
guyin916
guyin916
Posted
Posted
Results 51.52

 

My laptop is acer Aspire5022wlmi

 

cpu: AMD Turion64 ML-30 1.6G sse3

Mainboard: ATI Xpress200M (SB400)

Memory:512M ddr333

HD: Hatachi 60G 8Mcache 4200rpm

VideoCard: ATI Mobility X600 64M VRM(works QE/CI)

 

is this with or without beamsync enabled and quartzextreme enabled? pretty good potential scores, i think.

Link to comment
Share on other sites
Gdfath3r
Gdfath3r
Posted
Posted

repost my benchmark this time with v1.3 of Xbench:

 

Results	158.18	
System Info		
	Xbench Version		1.3
	System Version		10.4.7 (8J2135)
	Physical RAM		1024 MB
	Model		ADP2,1
	Drive Type		Maxtor 6L250R0
CPU Test	97.42	
	GCD Loop	162.63	8.57 Mops/sec
	Floating Point Basic	117.99	2.80 Gflop/sec
	vecLib FFT	58.26	1.92 Gflop/sec
	Floating Point Library	107.86	18.78 Mops/sec
Thread Test	194.16	
	Computation	141.24	2.86 Mops/sec, 4 threads
	Lock Contention	310.52	13.36 Mlocks/sec, 4 threads
Memory Test	153.06	
	System	143.60	
		Allocate	122.53	449.98 Kalloc/sec
		Fill	169.96	8263.71 MB/sec
		Copy	146.07	3017.02 MB/sec
	Stream	163.84	
		Copy	158.14	3266.27 MB/sec
		Scale	150.32	3105.60 MB/sec
		Add	175.35	3735.40 MB/sec
		Triad	174.36	3729.93 MB/sec
Quartz Graphics Test	194.51	
	Line	142.01	9.45 Klines/sec [50% alpha]
	Rectangle	188.63	56.32 Krects/sec [50% alpha]
	Circle	173.77	14.16 Kcircles/sec [50% alpha]
	Bezier	160.15	4.04 Kbeziers/sec [50% alpha]
	Text	733.00	45.85 Kchars/sec
OpenGL Graphics Test	166.92	
	Spinning Squares	166.92	211.75 frames/sec
User Interface Test	528.45	
	Elements	528.45	2.43 Krefresh/sec
Disk Test	107.74	
	Sequential	128.05	
		Uncached Write	137.48	84.41 MB/sec [4K blocks]
		Uncached Write	123.15	69.68 MB/sec [256K blocks]
		Uncached Read	128.50	37.61 MB/sec [4K blocks]
		Uncached Read	124.03	62.33 MB/sec [256K blocks]
	Random	93.00	
		Uncached Write	73.81	7.81 MB/sec [4K blocks]
		Uncached Write	109.92	35.19 MB/sec [256K blocks]
		Uncached Read	98.63	0.70 MB/sec [4K blocks]
		Uncached Read	97.77	18.14 MB/sec [256K blocks]

 

AMD x2 @ 2500 Mhz

ATI X1600 XT

2 GB RAM

 

Results 147.15

System Info

Xbench Version 1.3

System Version 10.4.7 (8J2135)

Physical RAM 2048 MB

Model ADP2,1

Drive Type WDC WD1600BB-00GUC0

CPU Test 90.74

GCD Loop 149.99 7.91 Mops/sec

Floating Point Basic 109.95 2.61 Gflop/sec

vecLib FFT 54.58 1.80 Gflop/sec

Floating Point Library 100.00 17.41 Mops/sec

Thread Test 180.00

Computation 130.94 2.65 Mops/sec, 4 threads

Lock Contention 287.90 12.39 Mlocks/sec, 4 threads

Memory Test 118.34

System 116.39

Allocate 110.29 405.03 Kalloc/sec

Fill 129.91 6316.70 MB/sec

Copy 110.97 2292.05 MB/sec

Stream 120.36

Copy 115.73 2390.39 MB/sec

Scale 115.82 2392.90 MB/sec

Add 125.95 2683.07 MB/sec

Triad 124.68 2667.25 MB/sec

Quartz Graphics Test 158.97

Line 119.96 7.99 Klines/sec [50% alpha]

Rectangle 147.90 44.16 Krects/sec [50% alpha]

Circle 140.16 11.42 Kcircles/sec [50% alpha]

Bezier 133.15 3.36 Kbeziers/sec [50% alpha]

Text 584.56 36.57 Kchars/sec

OpenGL Graphics Test 151.45

Spinning Squares 151.45 192.12 frames/sec

User Interface Test 350.32

Elements 350.32 1.61 Krefresh/sec

 

 

And where are DISK tests?..... :D

Link to comment
Share on other sites
guyin916
guyin916
Posted
Posted
My Score: 65.84 :)

 

Specs:

 

JaS Mac OS X 10.4.6

Pentium M 2.0 Ghz (Sonoma)

1.0 GB DDR2 SDRAM

80 GB Seagate @ 5400 RPM Parallel ATA (Recognized as SATA)

Intel 915GM Chipset

Intel GMA 900 Graphics

 

i assume you don't have quartz 2d extreme enabled and beamsync disabled.. your score should be higher, i think. was everything in the background closed?

Link to comment
Share on other sites
miramar
miramar
Posted
Posted

Just had some time to a bit of Xbenching. This is for my Conroe box, specs in my sig. It's an E6600 running at stock 2.4GHz. RAM is 533Mhz. QE2D disabled. Beamsync enabled. I'll try testing with QE2D enabled and Beamsync disabled later. 

Results	149.91	
System Info		
	Xbench Version		1.3
	System Version		10.4.6 (8I1119)
	Physical RAM		2048 MB
	Model		ADP2,1
	Drive Type		WDC WD2500KS-00MJB0
CPU Test	119.55	
	GCD Loop	282.55	14.89 Mops/sec
	Floating Point Basic	137.01	3.26 Gflop/sec
	vecLib FFT	87.74	2.89 Gflop/sec
	Floating Point Library	89.10	15.52 Mops/sec
Thread Test	240.63	
	Computation	220.21	4.46 Mops/sec, 4 threads
	Lock Contention	265.22	11.41 Mlocks/sec, 4 threads
Memory Test	138.44	
	System	151.37	
		Allocate	122.98	451.61 Kalloc/sec
		Fill	162.37	7894.79 MB/sec
		Copy	180.88	3735.99 MB/sec
	Stream	127.54	
		Copy	119.82	2474.88 MB/sec
		Scale	124.21	2566.16 MB/sec
		Add	134.43	2863.62 MB/sec
		Triad	132.85	2842.07 MB/sec
Quartz Graphics Test	179.13	
	Line	151.97	10.12 Klines/sec [50% alpha]
	Rectangle	182.15	54.38 Krects/sec [50% alpha]
	Circle	178.00	14.51 Kcircles/sec [50% alpha]
	Bezier	164.63	4.15 Kbeziers/sec [50% alpha]
	Text	240.92	15.07 Kchars/sec
OpenGL Graphics Test	184.14	
	Spinning Squares	184.14	233.60 frames/sec
User Interface Test	479.24	
	Elements	479.24	2.20 Krefresh/sec
Disk Test	72.19	
	Sequential	101.58	
		Uncached Write	109.85	67.45 MB/sec [4K blocks]
		Uncached Write	102.49	57.99 MB/sec [256K blocks]
		Uncached Read	83.71	24.50 MB/sec [4K blocks]
		Uncached Read	116.67	58.64 MB/sec [256K blocks]
	Random	55.99	
		Uncached Write	21.24	2.25 MB/sec [4K blocks]
		Uncached Write	137.77	44.11 MB/sec [256K blocks]
		Uncached Read	100.06	0.71 MB/sec [4K blocks]
		Uncached Read	140.63	26.09 MB/sec [256K blocks]

Link to comment
Share on other sites
zedzed
zedzed
Posted
Posted

I have Intel D945GNTL mobo with GMA950 video with 256 megs allocated to video.

 

I get 17 on User Interface Test

Is there any way to boost that or am I stuck with this number as long as I use the GMA950 video?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...