smilenkovski Posted February 13, 2011 Share Posted February 13, 2011 @mikeutter Nice post. Thank you. Link to comment Share on other sites More sharing options...
juanerson Posted February 14, 2011 Share Posted February 14, 2011 @mikeutter Dear friend... Very nice, and thank you for share your experience with us. Congratulations! Link to comment Share on other sites More sharing options...
BlackCH Posted February 16, 2011 Author Share Posted February 16, 2011 Hi guys; I need the spanish package from SL retail disk Could someone upload it somewhere and send me the link? Thanks! Link to comment Share on other sites More sharing options...
Zprood Posted February 16, 2011 Share Posted February 16, 2011 Hi guys; I need the spanish package from SL retail diskCould someone upload it somewhere and send me the link? Thanks! http://dl.dropbox.com/u/5779025/Spanish.pkg.zip Here it is , try it and let me know if it doesn't work. Link to comment Share on other sites More sharing options...
verleihnix Posted February 25, 2011 Share Posted February 25, 2011 Hi Folks, My HP nc6510b T8100 runs very nice except off: kernel task is running at 96% Fan stops after unplug from power supply everything else is ok. installed is v3 boot from BlackCH If I put my own made dsdt from linux CPU load and fan works fine, but: Only one USB highspeed device is available, reboot and power down takes several minutes to bring it down, native brightness is gone. Please help me to figure this out. Regards verleihnix dsdt.dsl.zip Link to comment Share on other sites More sharing options...
alemate23 Posted February 26, 2011 Share Posted February 26, 2011 Is there someone who have tried Lion? Link to comment Share on other sites More sharing options...
edpowa Posted February 26, 2011 Share Posted February 26, 2011 Hi Guys ! How is the status on the installation on an hp 6720s with 1.7 ghz celeron ? pros / cons ? i am thinking about buying one ! greetings /ed Link to comment Share on other sites More sharing options...
smilenkovski Posted February 26, 2011 Share Posted February 26, 2011 Hi Guys ! How is the status on the installation on an hp 6720s with 1.7 ghz celeron ? pros / cons ? i am thinking about buying one ! greetings /ed C2Duo is the way to go. Link to comment Share on other sites More sharing options...
Insanelymind Posted March 2, 2011 Share Posted March 2, 2011 hi all , i have installed 10.6.6 succesfully but my wifi card doesn't work can somebody help me? thank you in advance Fosco I'm sorry for my terrible English Link to comment Share on other sites More sharing options...
juanerson Posted March 2, 2011 Share Posted March 2, 2011 @Insanelymind The Broadcom 4312 works Out Of The Box (as third-party wireless card). But Please, for try to help you, are you using the DSDT v0.20? Can you see the card in system profiler (PCI cards)? You see information in IORegistry Explorer? BTW, maybe you need add the AirPort interface in Network (on System Preferences)... just click on (+) add the AirPort and go! Good Luck. Link to comment Share on other sites More sharing options...
Insanelymind Posted March 3, 2011 Share Posted March 3, 2011 Thanks for the fast answer, yes, I'm using the dsdt v0.20: the one provided in the installer in the boot cd In system profiler i see my wireless card but it says me that the driver is not installed In the network panel (system preferences) i can't add an airport connection thanks for your help Fosco Link to comment Share on other sites More sharing options...
BlackCH Posted March 3, 2011 Author Share Posted March 3, 2011 Thanks for the fast answer,yes, I'm using the dsdt v0.20: the one provided in the installer in the boot cd In system profiler i see my wireless card but it says me that the driver is not installed In the network panel (system preferences) i can't add an airport connection thanks for your help Fosco you should be using 10.6.6 legacy kernel, not 10.6.0 Link to comment Share on other sites More sharing options...
Insanelymind Posted March 3, 2011 Share Posted March 3, 2011 ooops I'm sorry 10.6.0 was my mistake in the signature it's 10.6.6 thank you for the answer Fosco Link to comment Share on other sites More sharing options...
juanerson Posted March 3, 2011 Share Posted March 3, 2011 You need, and you should have that airport vanilla drivers. Of course is provided in RETAIL dvd, and updated from Combo 10.6.6. Just for record, you installed from RETAIL (celeron bootdisc version)? You upgraded the system from official Apple Combo? Those are very important things to make clear here, because you did not use the RETAIL installation method in this thread. Sorry, I can't provide the drivers because I am in 10.6.7 (about dependencies = all WLAN family). Good Luck. Link to comment Share on other sites More sharing options...
Insanelymind Posted March 3, 2011 Share Posted March 3, 2011 i've installed 10.6 retail version with celeron boot disc upgraded to 10.6.6 (macosx combo update) installed chameleon (that was in the boot cd) installed drives with the packages in the first post installed legacy kernel 10.6.6 (otherwise it won't boot) rebooted and i have all working without my wireless cads thanks again Fosco Link to comment Share on other sites More sharing options...
juanerson Posted March 3, 2011 Share Posted March 3, 2011 Can you upload your .ioreg (Save a Copy As) from IORegistry Explorer into .zip file please? Link to comment Share on other sites More sharing options...
Insanelymind Posted March 3, 2011 Share Posted March 3, 2011 here is it IO_service.zip hi Fosco Link to comment Share on other sites More sharing options...
smilenkovski Posted March 3, 2011 Share Posted March 3, 2011 HI juanerson. I saw that you are on 10.6.7. Share your experience, please. Link to comment Share on other sites More sharing options...
juanerson Posted March 4, 2011 Share Posted March 4, 2011 Ok dear Fosco, FYI (from your own IOReg) you have a non-native 4315 card, BUT dont worry because we can try the proper alternative/solution , I mean coming form THIS POST (also 661, 662, 663 and 668), we can fake it to 4318 (native in OS X). PLEASE use the DSDT variant of V0.20 attached, adapted for your AirPort card. Replace the actual dsdt in /Extra with this one, reboot, maybe need add the AirPort interface (maybe not)... and please tell me other history. Good Luck. P.S. In your IOreg I see your HDD is PATA, or have configured as non-AHCI in BIOS?? or Im wrong about it ? Also, I think you dont need the legacy speedstep injector, because your processor is not supported (only C2D and DualCore). @BlackCH, you see the Fosco IOReg too? in SATA section appear as a PATA device . @smilenkovski, my friend 10.6.7 is a little more faster than 10.6.6, but basically is the same . Fosco_DSDT_fake_4318_AirPort_V0.20.zip Link to comment Share on other sites More sharing options...
BlackCH Posted March 4, 2011 Author Share Posted March 4, 2011 @BlackCH, you see the Fosco IOReg too? in SATA section appear as a PATA device . I think is because he is not using AHCI mode but IDE (compatible/enhanced in the BIOS setup) PATA @ 1F,1 SATA @ 1F,2 Link to comment Share on other sites More sharing options...
Insanelymind Posted March 4, 2011 Share Posted March 4, 2011 it doesn't work but in system profiler it says that i have an airport controller (4318) but with no driver installed and i can't add the ariport connection in the network panel thanks again Fosco Edit: IT WOORKS!!!! Thank you!!!! Link to comment Share on other sites More sharing options...
BlackCH Posted March 4, 2011 Author Share Posted March 4, 2011 it doesn't work but in system profiler it says that i have an airport controller (4318) but with no driver installed and i can't add the ariport connection in the network panel thanks again Fosco Try booting with -f flag or loading the broadcom kext manually from terminal (sudo kextload) if this doesnt work you need to edit the plist inside the broadcom kext and insert your wifi card dev id Link to comment Share on other sites More sharing options...
juanerson Posted March 4, 2011 Share Posted March 4, 2011 I think is because he is not using AHCI mode but IDE (compatible/enhanced in the BIOS setup) PATA @ 1F,1 SATA @ 1F,2 I think so. But, I dont want to keep suspecting about his applied method, but how he could make the retail installation (GUID partition scheme) in IDE mode? And, why dont works the AirPort DSDT patch if got it the exactly same wifi card as smilenkovski (all device ID parameters). So, this make some sense if he install from a distro... not from RETAIL. What do you think, Black? EDITED: Edit: IT WOORKS!!!! Thank you!!!! What was wrong in the first attempt? Other .ioreg please? Link to comment Share on other sites More sharing options...
Insanelymind Posted March 4, 2011 Share Posted March 4, 2011 i don't know what was wrong i've only rebooted one more time here's the .ioreg file MacBook_di_Fosco_.zip Thank you again Link to comment Share on other sites More sharing options...
juanerson Posted March 5, 2011 Share Posted March 5, 2011 You are welcome. Link to comment Share on other sites More sharing options...
Recommended Posts