Morden Posted June 3, 2006 Share Posted June 3, 2006 I had the same problems, Zappadoc's driver didn't help, cause Zappadoc didn't added string for nForce 4 SLI IE PATA. Device id of your PATA controller is 003510de, isn't it? I had to compile driver from Darwin sources on my own. Link to comment Share on other sites More sharing options...
gondawa Posted June 3, 2006 Share Posted June 3, 2006 I novice in the "mac" world and change Kerxt etc it's so new for me... AND THE REST TOO But for the device id .. How to get it? I have cheked NVIDI nForce4 Intel edition Parallel Ata Controller and i found : PCI\VEN_10DE&DEV_0035&SUBSYS_818A1043&REV_F2\3&411E6FE&0&78 thus i think my device id is 0035 .. not 003510de . I'm wrong? I'm learning..be cool :-) EDIT :: thanks to Morden my problem is resolved. ! Link to comment Share on other sites More sharing options...
nepali_gurkha Posted June 7, 2006 Share Posted June 7, 2006 ok, hey I have a Hp computer and it has like a ATI RS480 Host Bridge and ATI IXP SB400 IDE Controller 1002-4376-2A26103C-00 not sure what thiese numbers mean = "(255) (0-20-1)" but any way this modified kext should work but it dosn't in booting up it says "com.apple.AppleOnboardPCATA.kext" has no kernel dependency. I'm running 10.4.6 so i don't see the problem, the only thing it might be is my hard drive is connect in the 2nd line in the IDE cable and the 1st is my DVD burner.... do u guys think its that? Thanks -Tabha Link to comment Share on other sites More sharing options...
Moonblood Posted June 11, 2006 Share Posted June 11, 2006 does it wotk on nforce4 4x to? Link to comment Share on other sites More sharing options...
shedt Posted July 28, 2006 Share Posted July 28, 2006 ok, hey I have a Hp computer and it has like a ATI RS480 Host Bridge and ATI IXP SB400 IDE Controller 1002-4376-2A26103C-00 not sure what thiese numbers mean = "(255) (0-20-1)" but any way this modified kext should work but it dosn't in booting up it says "com.apple.AppleOnboardPCATA.kext" has no kernel dependency. I'm running 10.4.6 so i don't see the problem, the only thing it might be is my hard drive is connect in the 2nd line in the IDE cable and the 1st is my DVD burner.... do u guys think its that? Thanks -Tabha I think i have the same or similar system. is there a similar driver but with sata support? did you find a solution yet? Link to comment Share on other sites More sharing options...
shedt Posted July 29, 2006 Share Posted July 29, 2006 Are there any plans to create a driver for SATA drives for motherboards with an ATI chipset, or does anyone know of any out there? ok, hey I have a Hp computer and it has like a ATI RS480 Host Bridge and ATI IXP SB400 IDE Controller 1002-4376-2A26103C-00 not sure what thiese numbers mean = "(255) (0-20-1)" but any way this modified kext should work but it dosn't in booting up it says "com.apple.AppleOnboardPCATA.kext" has no kernel dependency. I'm running 10.4.6 so i don't see the problem, the only thing it might be is my hard drive is connect in the 2nd line in the IDE cable and the 1st is my DVD burner.... do u guys think its that? Thanks -Tabha does anyone know how this could be added? Link to comment Share on other sites More sharing options...
Crazor Posted August 10, 2006 Share Posted August 10, 2006 Man this is INSANE! Works TERRIBLY fast on my nForce4 board! System boot time is like 10s(!) to desktop now compared to 1-2 minutes before. Thank you so much for your work! Using ASUS P5N32-SLI Deluxe here... Vista, better strap your running boots! =) Link to comment Share on other sites More sharing options...
tomazzzzzzzzzzz Posted November 21, 2006 Share Posted November 21, 2006 hi i v an MSI MS-7184 with ATI SB400 218S4EASA32HK DH0826.00 0519SS ( HP DESKTOP 5129FR ) installed the AppleOnboardPCATA.kext but the hd is still slow & i can t start any installer anyone know if there s a solution available ? Link to comment Share on other sites More sharing options...
abamac Posted January 4, 2007 Share Posted January 4, 2007 Zappadoc: Thank you for this driver. Huge drive performance gain (over AppleGenericATA) on my Compaq R3000T running osx86 10.4.6. Also enabled my optical drive, as was the case with a previous post. If anyone is struggling to identify their chipset, try cpuz (if you're able to boot windows). I wasn't able to find an osx util to give similar info. Northbridge ATI ID5833 rev. 02 Southbridge ATI SB200 rev. 00 Link to comment Share on other sites More sharing options...
squimmy Posted March 1, 2007 Share Posted March 1, 2007 (edited) Mine doesn't work - just gets stuck on "waiting for root device", the generic ATA kext works but only without UDMA so it is very slow. I'm on an ATI IXP chipped motherboard - the device id thing is either 1002-4376 or 1002-4379, i'm not sure. Is there a way I can find out from within OS X? I'm on 10.4.8 BTW. Thanks. Edited March 1, 2007 by squimmy Link to comment Share on other sites More sharing options...
squimmy Posted March 5, 2007 Share Posted March 5, 2007 My hard drive is connected to the second connection of the cable, the first being my dvd player just like "nepali_gurkha". Is this what is causing my problem? Link to comment Share on other sites More sharing options...
lwt Posted April 25, 2007 Share Posted April 25, 2007 omg my broad is D101ggc ,it look's like cannot use it cause ,my harddisk is ST 250G(sata) excuse me,could you make another driver for sata. thanks Link to comment Share on other sites More sharing options...
FreakyMac Posted April 25, 2007 Share Posted April 25, 2007 Will this work for my Nvidia nForce4 MCP51?? Link to comment Share on other sites More sharing options...
AcidRain9 Posted April 26, 2007 Share Posted April 26, 2007 I am running OSX 10.4.8 on my 500 Gb PATA Drive and was wondering about installing this kext. i have an MSI K9N Nforce 570 Mobo is it even supported by the kext? here are my xbench results for my hdd: Disk Test 20.02 Sequential 14.40 Uncached Write 11.13 6.83 MB/sec [4K blocks] Uncached Write 11.60 6.57 MB/sec [256K blocks] Uncached Read 24.77 7.25 MB/sec [4K blocks] Uncached Read 16.30 8.19 MB/sec [256K blocks] Random 32.82 Uncached Write 29.63 3.14 MB/sec [4K blocks] Uncached Write 20.99 6.72 MB/sec [256K blocks] Uncached Read 84.82 0.60 MB/sec [4K blocks] Uncached Read 34.82 6.46 MB/sec [256K blocks] Link to comment Share on other sites More sharing options...
ole2 Posted November 14, 2007 Share Posted November 14, 2007 Zappadoc: Thank you for this driver. Huge drive performance gain (over AppleGenericATA)on my Compaq R3000T running osx86 10.4.6. Also enabled my optical drive, as was the case with a previous post. If anyone is struggling to identify their chipset, try cpuz (if you're able to boot windows). I wasn't able to find an osx util to give similar info. Northbridge ATI ID5833 rev. 02 Southbridge ATI SB200 rev. 00 instead of rev, could you post your ATI components PCI ID's? for example: 1002-4370-308B103C-02 Audio Controller ATI IXP SB400 AC'97 Audio Controller 1002-4371-00000000-00 PCI Subtractive (0-2:3) ATI IXP SB400 PCI-PCI Bridge 1002-4372-308B103C-11 SMBus Controller ATI IXP SB400 SMBus 1002-4373-308B103C-00 EHCI USB Controller ATI IXP SB400 EHCI USB 2.0 Controller 1002-4374-308B103C-00 OHCI USB Controller ATI IXP SB400 OHCI USB Controller 1002-4375-308B103C-00 OHCI USB Controller ATI IXP SB400 OHCI USB Controller 1002-4376-308B103C-00 EIDE Controller ATI IXP SB400 IDE Controller 1002-4377-308B103C-00 ISA Bridge ATI IXP SB400 PCI-ISA Bridge 1002-4378-308B103C-02 Hayes Compatible ATI IXP SB400 AC'97 Modem Controller 1002-5955-308B103C-00 VGA Controller ATI Mobility Radeon XPRESS 200 1002-5950-308B103C-01 Host Bridge ATI RS480 Host Bridge 1002-5A36-00000000-00 PCI Bridge (0-16) ATI 1002-5A37-00000000-00 PCI Bridge (0-32) ATI 1002-5A3F-00000000-00 PCI Bridge (0-1) ATI thanks Link to comment Share on other sites More sharing options...
blob4000 Posted November 15, 2007 Share Posted November 15, 2007 Thanks to everyone who contributed to this kext! Sorry I've been away from the scene for a while. I've just moved to another city, and I'm waiting for a decent version of 10.5 (for AMD) to come along before testing this driver. Link to comment Share on other sites More sharing options...
Shadow Root Posted February 12, 2008 Share Posted February 12, 2008 I am waiting for a Leopard version too Link to comment Share on other sites More sharing options...
zandera Posted February 14, 2008 Share Posted February 14, 2008 Will this work for my Nvidia nForce4 MCP51?? if sata, than sata not ide its strightly different thing look my specs Link to comment Share on other sites More sharing options...
ole2 Posted February 20, 2008 Share Posted February 20, 2008 the file is gone? Ok, here the rev. 2 of the driver, this one start with udma 6 on last 3 supported (supposed ) NVIDIA ATA controlers instead of udma5...Cheers! Z Link to comment Share on other sites More sharing options...
Magicum Posted April 1, 2008 Share Posted April 1, 2008 Tried this at my 10.5.2 (Leo4Allv2) and ATI SB450 IDE Controller, some better than before (booting takes 8-10 minutes instead of previous 30-40 minutes) but still slow. == ADDED == Possibly (just suggestion) that now, being patched, the speed is ok, but HDD continuously going to sleep mode or just powered off after each operation. Not sure, but who knows. == FINAL RESULT == The solution doesn't work on Asus A6Rp laptop (ATI SB450 South Bridge IDE Controller) with 10.4.10 mac.nub Link to comment Share on other sites More sharing options...
Magicum Posted April 9, 2008 Share Posted April 9, 2008 == SOME UPDATE regarding ATI S450 IDE Controller == Distro: Leo4all, Leo4allv2 (Leopard 10.5.2) I've made some test. Below are results 1. Using AppleGenericPCATA.kext (I've taken this kext from some tiger threads whre guys improved ATA issues): HDD works slowly, but continuously, without gaps, pauses, only slow. Similar to inactivated DMA mode. 2. Using AppleOnboardPCATA or AppleVIAATA: Read\write operations are fast as should be, however there are a lot of long pauses between processing data portions. That's why using both 1. and 2. produces the same result: ~3 hours installation takes, 15-30 minutes for boot, 10-15 minutes for shutdown. Still need any help. And new idea, possibly this caused not by IDE Controller, but some other device? Link to comment Share on other sites More sharing options...
Magicum Posted April 9, 2008 Share Posted April 9, 2008 nobody had sych trouble? or everybody don't care ? =) Link to comment Share on other sites More sharing options...
Bernymo Posted April 20, 2008 Share Posted April 20, 2008 Ok, here the rev. 2 of the driver, this one start with udma 6 on last 3 supported (supposed ) NVIDIA ATA controlers instead of udma5...Cheers! Z Hello, thanks for this file, Sorry but i don't understand how integrate the file on my ISO DVD thanks . Link to comment Share on other sites More sharing options...
Shadow Root Posted June 23, 2008 Share Posted June 23, 2008 I am using AppleVIAATA, but I have a SB450. IDE disks works good. But SATA dont recognized. Any idea? Thank you! gaston Link to comment Share on other sites More sharing options...
KibosJ Posted July 27, 2008 Share Posted July 27, 2008 Does this work on the SB600? I tried following the instructions, but I cannot make Leopard see my DVD RW at all . Tiger used to see it and Leopard sees it if I install it over the top of tiger but I got a Kernel Panick after rebooting when doing that. Link to comment Share on other sites More sharing options...
Recommended Posts