djmastera2000 Posted January 8, 2009 Share Posted January 8, 2009 @wingrunr21 The kext you attach in post #74 did work, thanks. So what was the difference with others? This one freezes too This time tested with last versions Chunnans' b2 of iopcmciafamily, because of my 3g pcmcia card... Anybody succesfully tested card reader driver with chunnans' iopcifamily/iopcmciafamily? Link to comment Share on other sites More sharing options...
aliasa_anderson Posted January 10, 2009 Share Posted January 10, 2009 This one freezes too This time tested with last versions Chunnans' b2 of iopcmciafamily, because of my 3g pcmcia card... Anybody succesfully tested card reader driver with chunnans' iopcifamily/iopcmciafamily? I did but got IOKIT timeout errors and very slow bootup. Link to comment Share on other sites More sharing options...
djmastera2000 Posted January 10, 2009 Share Posted January 10, 2009 I did but got IOKIT timeout errors and very slow bootup. Strange...will test vanilla iopcifamily again with this version if i have more time...thx Link to comment Share on other sites More sharing options...
Wiwi Posted January 10, 2009 Share Posted January 10, 2009 Lastests version (since the one for macgirl) load successfully without freezing for me, but sd card doesn't mount, never... 10/01/09 13:15:48 kernel SDHCI: BaseClock = 33MHz 10/01/09 13:15:48 kernel SDHCI: SD Clock = 257KHz 10/01/09 13:15:48 kernel powerSD: 0x1f021a1 10/01/09 13:15:49 kernel SDHCI: No Response from CMD8 10/01/09 13:15:49 kernel SDHCI: No Response from CMD8 10/01/09 13:15:50 kernel SDHCI: BaseClock = 33MHz 10/01/09 13:15:50 kernel SDHCI: SD Clock = 16500KHz 10/01/09 13:15:50 kernel SDHCI: RCA 0x00001234 10/01/09 13:15:50 kernel SDHCI: RCA 0x00001234 10/01/09 13:15:52 kernel SDHCI: Response: 0x00004F00 0x325F5983 0xCBF6DBFF 0x8F8A4000 10/01/09 13:15:52 kernel SDHCI: Response: 0x00004F00 0x325F5983 0xCBF6DBFF 0x8F8A4000 ----> kext loaded without card in And sometimes it talk about 4 bit mode... when i load kext without card in and i plug it later... Oh, and in this case i can see AppleXsanFilter loaded to the end of the IORegistry tree of IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@1E/IOPCI2PCIBridge/pci1180,822@3,1 ... I use IOPCIfamily vanilla and tested with ChunNan one... no change. It's strange, because i have an Asus A8sc motherboard, sister of the A8sr one... Many thanks for your work man, it's pretty cool to think that my HAck will be 100% operational after more than one year of *****... Link to comment Share on other sites More sharing options...
Slice Posted January 11, 2009 Share Posted January 11, 2009 I use my own version of IOPCIFamily 2.5.4. (see signature). Funny result: WindowsXP can't read SD SanDisk 16Gb. MacOSX with driver fc1 from sf.net read this card without any problem. Link to comment Share on other sites More sharing options...
Perceval l'Hylien Posted January 11, 2009 Share Posted January 11, 2009 Didn't work for me (Asus A8Sc), caused troubles like other people : - Disconnect the mouses (trackpad and bluetooth mouse) BUT the trackpad buttons work. - Massively slowdown the computer. - Doesn't read any SD card. - Made the computer stop not to work. This is a Ricoh standard card reader Good luck ! 1 Link to comment Share on other sites More sharing options...
ckybam69 Posted January 15, 2009 Share Posted January 15, 2009 mine works. Jmicron b38x 0x2382197b Link to comment Share on other sites More sharing options...
SpY_WeRe Posted January 16, 2009 Share Posted January 16, 2009 I have a Dell Inspiron 1525 and would like to know if my Card Reader will work... My Hardware Card Reader is: Ricoh RL5c592 Memory Stick Bus Host Adapter Ricoh RL5c822 Bus Host Adapter Ricoh RL5c832 IEEE1394 Controller Ricoh RL5c843 MMC Host Controller Ricoh RL5c852 xD-Picture Card Controller well, I do not know what is right, but when you see the description of computer hardware appears all these above. If I download this driver that is available in the 1st post, will work my card reader normaly? I await answers...=) Thanks Bye Link to comment Share on other sites More sharing options...
Monkey_@@ Posted January 16, 2009 Share Posted January 16, 2009 Mine is working... thanks! Link to comment Share on other sites More sharing options...
SpY_WeRe Posted January 16, 2009 Share Posted January 16, 2009 you are fast! I can install that will be 100% functionality? Help me with my questions please!: http://forum.insanelymac.com/index.php?showtopic=147292 Thanks for the fast-answer!! Link to comment Share on other sites More sharing options...
Monkey_@@ Posted January 16, 2009 Share Posted January 16, 2009 you are fast! I can install that will be 100% functionality? Thanks for the fast-answer!! The only way to see if it's going to be 100% functional is to install and test! Remember to repair permissions after installing the kext. Please, post your results here! Link to comment Share on other sites More sharing options...
SpY_WeRe Posted January 16, 2009 Share Posted January 16, 2009 Sorry to do this stupid question, but ... How to install the kext? I am totally new, I ask a lot of patience with me! Bye Link to comment Share on other sites More sharing options...
Wiwi Posted January 16, 2009 Share Posted January 16, 2009 Sorry to do this stupid question, but ... How to install the kext? I am totally new, I ask a lot of patience with me! Bye Kexthelper. You can search a little.... I've tested a verbose version of fc1, this is what i get when i insert SD card : 16/01/09 16:25:38 kernel SDHCI: BaseClock = 33MHz 16/01/09 16:25:38 kernel SDHCI: SD Clock = 257KHz 16/01/09 16:25:38 kernel powerSD: 0x1f021a1 16/01/09 16:25:39 kernel SDHCI: [b]No Response from CMD8[/b] 16/01/09 16:25:39 kernel SDHCI: BaseClock = 33MHz Then mouse block... Any idea ? Ricoh one... Link to comment Share on other sites More sharing options...
Monkey_@@ Posted January 16, 2009 Share Posted January 16, 2009 Sorry to do this stupid question, but ... How to install the kext? I am totally new, I ask a lot of patience with me! Bye You can use OSX86Tools to install kexts, repair permissions and clean cache... do a search for download it! Link to comment Share on other sites More sharing options...
MiniBUU Posted January 20, 2009 Share Posted January 20, 2009 I have a Dell Inspiron 1525 and would like to know if my Card Reader will work... My Hardware Card Reader is: Ricoh RL5c592 Memory Stick Bus Host Adapter Ricoh RL5c822 Bus Host Adapter Ricoh RL5c832 IEEE1394 Controller Ricoh RL5c843 MMC Host Controller Ricoh RL5c852 xD-Picture Card Controller well, I do not know what is right, but when you see the description of computer hardware appears all these above. If I download this driver that is available in the 1st post, will work my card reader normaly? I await answers...=) Thanks Bye Yes it works, read the other post and what others have to say about it. I also have a Dell Inspiron 1525 and SD/SH~ SD Cards work great. You have to unmount it before you remove the card or it will crash your system. But other than that it works perfectly. Also is there a way to keep proper revisions and info so that we know whats going on and when a new version comes out. As far as I know I have the lastest version, but then again I am not sure, cause I downloaded it from the Dell Driver Package 1.4. Link to comment Share on other sites More sharing options...
Boombeng Posted January 20, 2009 Share Posted January 20, 2009 Yes it works, read the other post and what others have to say about it. I also have a Dell Inspiron 1525 and SD/SH~ SD Cards work great. You have to unmount it before you remove the card or it will crash your system. But other than that it works perfectly. Also is there a way to keep proper revisions and info so that we know whats going on and when a new version comes out. As far as I know I have the lastest version, but then again I am not sure, cause I downloaded it from the Dell Driver Package 1.4. You don't have the latest version because the last update of Sonotone's Dell laptops Post-Installer (V1.4.1) is dated 12/26/2008 whereas latest SD card Reader update dated 05/01/2009 (Final Candidate V1), you can check news at Sourceforge's developpement page, as mentioned on the first page of the thread... Link to comment Share on other sites More sharing options...
me999 Posted January 20, 2009 Share Posted January 20, 2009 Works perfectly on an ASUS F8Sg Notebook. Thanks very much :censored2: Link to comment Share on other sites More sharing options...
aliasa_anderson Posted January 22, 2009 Share Posted January 22, 2009 Works perfectly on an ASUS F8Sg Notebook. Thanks very much Hi guys, Did anyone try it with Tiger also ? Link to comment Share on other sites More sharing options...
dido2 Posted January 26, 2009 Share Posted January 26, 2009 Incredible! It works perfect with my thinkpad x60s! Not only support SD (2G fat) but also support SDHC (4G fat32) which can't be recognized under windows system! Link to comment Share on other sites More sharing options...
jjduro Posted January 27, 2009 Share Posted January 27, 2009 Hi. I've used this kext with an Asus F3Jc. And it works great. Now, the only thing that doesn't work on my hackie is the webcam. :censored2: Could you please update the first post to include my laptop model and make? Thanks :censored2: Link to comment Share on other sites More sharing options...
aei Posted January 30, 2009 Share Posted January 30, 2009 not work on HP DV2500 Laptop Link to comment Share on other sites More sharing options...
haft Posted February 2, 2009 Share Posted February 2, 2009 Works, but unfortunately crashes finder after a short time. Dell Inspiron 1525, 10.5.5. Link to comment Share on other sites More sharing options...
homer007 Posted February 9, 2009 Share Posted February 9, 2009 is it possible if you can support for Texas Instruments PCIxx12 card reader dev id 104c 803b? Link to comment Share on other sites More sharing options...
Slice Posted February 10, 2009 Share Posted February 10, 2009 Incredible!It works perfect with my thinkpad x60s! Not only support SD (2G fat) but also support SDHC (4G fat32) which can't be recognized under windows system! Yes, the MacOSX driver is better then Windows's one Works, but unfortunately crashes finder after a short time. Dell Inspiron 1525, 10.5.5. Dell Inspiron 1525 - works perfect. is it possible if you can support for Texas Instruments PCIxx12 card reader dev id 104c 803b? No, hardcoded differently. Link to comment Share on other sites More sharing options...
mehdymehdy Posted February 14, 2009 Share Posted February 14, 2009 something very strange is happening . i have HP dv2700 . the first time i installed the kext it worked perfect . but after a couple of days it stopped working . so i tried anything u can imagin. from IOPCIFamily.kext to IOUSBFamily.kext and a lot of other stuff . and different IOSDHCIBlockDevice.kext . but it did not work anymore . i tired it inside vista it works still so it's not the SD card nor the card reader. so i gave up and i did a fresh install . and installed the driver . and it didn't work . once i insert the SD card it freezes . that's all i get and it's very strange cus the first time it worked very nice . but now it's not working anymore. i'm sure the problem is not the IOSDHCIBlockDevice.kext . it should be from somewhere else . please help anyone. Link to comment Share on other sites More sharing options...
Recommended Posts