quinielascom Posted October 23, 2008 Share Posted October 23, 2008 This driver is intended to be used on any machine running Mac OS X with a PCI based JMicron SD Card reader such as the Dell Mini 9 or the Acer Aspire One. It may also be extended to work with other SDHCI compliant hosts. For compatibility check this file: Compatibility_List.txt And maybe others with this device: The driver is available in the development page. http://redirectingat.com/?id=292X457&u...11-release.html Another development: http://forum.voodooprojects.org/index.php/board,14.0.html Thanks. 1 Link to comment Share on other sites More sharing options...
Slice Posted October 23, 2008 Share Posted October 23, 2008 Works ? No Or this is not possible because Apple laptops no have internal cardreaders ? Thanks. Yes, Apple has only USB cardreader. For PCI no any drivers. - edited: now yes! Link to comment Share on other sites More sharing options...
aliasa_anderson Posted November 23, 2008 Share Posted November 23, 2008 This driver works fine for me: http://forum.insanelymac.com/index.php?act...st&id=38976 Here is the original driver: http://sourceforge.net/projects/osxsdhci/ This driver is in alpha development phase but i only changed the Vendor and device ID and works fine. Hi quinielascom, my specs for the same are: 07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) 07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a) 07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05) 07:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) Do you think i should give it a try.... how is the performance ? are all cards supported ? Link to comment Share on other sites More sharing options...
AlexanderZhang Posted November 23, 2008 Share Posted November 23, 2008 it make the system slowly,if the card you used is low speed. sorry for my english... Link to comment Share on other sites More sharing options...
AtomOSX Posted November 24, 2008 Share Posted November 24, 2008 I have tested the kext and works fine. I can confirm that it only read SD cards, but its an amazing start because it is stilll in development. I have got beta 2. My SD controller id follows : SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] Link to comment Share on other sites More sharing options...
yopale Posted November 24, 2008 Share Posted November 24, 2008 Tested on HP dv2700 whith Ricoh SD/MMC Host Controller and it works very well read and write supported and quite fast tested only with a micro sd card Link to comment Share on other sites More sharing options...
dell700m Posted November 25, 2008 Share Posted November 25, 2008 Does NOT work for me. Thinkpad R61. 15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) Kill my USB mouse every time i insert a SD card, and SD card doesn't mount on desktop. Any thoughts? Link to comment Share on other sites More sharing options...
izernet Posted November 25, 2008 Share Posted November 25, 2008 this kext works for me thks quinielas u r great Link to comment Share on other sites More sharing options...
macgirl Posted November 26, 2008 Share Posted November 26, 2008 Didn't work for my XPS M1330 but I hope soon could work Link to comment Share on other sites More sharing options...
Slice Posted November 26, 2008 Share Posted November 26, 2008 Didn't work for me. If I'll get the sources (it is OpenSource or no?) then I'll try to improve it. Link to comment Share on other sites More sharing options...
Slice Posted November 27, 2008 Share Posted November 27, 2008 Here is the new source code: https://osxsdhci.svn.sourceforge.net/svnroot/osxsdhci/ but originally was development here: http://forum.insanelymac.com/index.php?showtopic=62711 after in: http://www.mydellmini.com/forum/sd-card-sl...on-t360s20.html make improvements to sd driver. Very thanx for sources. I begin to study. Link to comment Share on other sites More sharing options...
MiniBUU Posted November 30, 2008 Share Posted November 30, 2008 Is this going to be the page for this project or can we expect a new posting so that we can become beta testers Link to comment Share on other sites More sharing options...
Onzarob Posted December 1, 2008 Share Posted December 1, 2008 Installed and working perfectly........well done. Link to comment Share on other sites More sharing options...
MiniBUU Posted December 2, 2008 Share Posted December 2, 2008 Congrads Onzarob. I hope that Slice will be able to make it functional for everyone. Glad quinielascom found the drivers and started up this cause it is hope for everyone that has build in card readers. Link to comment Share on other sites More sharing options...
kazzi Posted December 2, 2008 Share Posted December 2, 2008 Not work for me. Mine is 0x11800843 Link to comment Share on other sites More sharing options...
kazzi Posted December 3, 2008 Share Posted December 3, 2008 Thanks quinielascom for correcting me. I changed the value but it seems doesn't work either. What should I do to check if it is detected by Leopard? The kext is loaded but I can't find it in System Profiler. Regards, Ha Le-Viet. Link to comment Share on other sites More sharing options...
rschultz101 Posted December 3, 2008 Share Posted December 3, 2008 using pci express card reader, works, think it goes over the usb , so compatible, does not stick out, also need to disable usb boot in bios, otherwise, it will try to boot from SD ,... works with SDHC . hardware hack,... otherwise, to use a usb reader, and hardwire it to an existing usb port, most usefull , for a netbook, without an express card slot. Link to comment Share on other sites More sharing options...
wingrunr21 Posted December 3, 2008 Share Posted December 3, 2008 This is interesting. I was planning on porting sdhci after I finished with my current project (I know, it's taking awhile, I'm very busy...). Anyway, the FreeBSD driver is just as functional as the Linux one (meaning SD and MMC card support). Here's the source: http://people.freebsd.org/~mav/sdhci/ Link to comment Share on other sites More sharing options...
MiniBUU Posted December 3, 2008 Share Posted December 3, 2008 J0hn Demented, what are your Vendor & Device ID ? some people (including me) got working the card reader with only change this value in two places into kext; first the under Content Info.plist and other Info.plist under Content/Resources folder. I not sure if edit the Content/Resources/Info.plist is necessary but i changed the ID also when i installed this kext. Regards. 02:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) 02:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12) 02:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) 02:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12) I am not sure what I am suppose to add. Do you need any additional info from me? Link to comment Share on other sites More sharing options...
talisman Posted December 4, 2008 Share Posted December 4, 2008 Works on XPS M1530. SD only.... thanks Link to comment Share on other sites More sharing options...
kazzi Posted December 4, 2008 Share Posted December 4, 2008 I made it works now. Detects a card after around 1 minute and can't read the FAT partition card. Thanks so much for making it work. Regards, Ha Le-Viet. Link to comment Share on other sites More sharing options...
MiniBUU Posted December 4, 2008 Share Posted December 4, 2008 IoReg see everything I believe. Its a little different then yours but it show up. I think my problem is I have a SanDisk Memory Stick Pro (MagicGate) so its not seeing that. I need to go find my regular SD Cards I suppose. Link to comment Share on other sites More sharing options...
krrr Posted December 5, 2008 Share Posted December 5, 2008 humm. guys in it goes into beta of final please update here. also ping here if the 50% or high usage bug is solved i will try it then. Link to comment Share on other sites More sharing options...
fran1987 Posted December 5, 2008 Share Posted December 5, 2008 Don´t work for my (Acer Travelmate 5720): 0f:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] 0f:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] 0f:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] Link to comment Share on other sites More sharing options...
aliasa_anderson Posted December 6, 2008 Share Posted December 6, 2008 Don´t work for my (Acer Travelmate 5720): 0f:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] 0f:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] 0f:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] Try changing the device IDs in Info.plist file to match the one you have. There are two plist files in this kext. 1. IOSDHCIBlockDevice.kext\IOSDHCIBlockDevice.kext\Contents\Resources and 2. IOSDHCIBlockDevice.kext\IOSDHCIBlockDevice.kext\Contents Change the string in : <key>IOPCIMatch</key> <string>0x08221180</string> to the device id you have. The default value in the kext is for Ricoh i guess. 0a:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) I am not sure but try using: <key>IOPCIMatch</key> <string>0x803c104c</string> Link to comment Share on other sites More sharing options...
Recommended Posts