hypnoticcow Posted July 10, 2009 Share Posted July 10, 2009 It's not working for me I am using the lspci shows this information. 05:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) 05:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 01) 05:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a) 05:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05) I have used the 0x08221180 rc1 version of the driver and during boot it hangs on I/O kit timeout I have tried using the vanilla IOPCIFamily.kext and IOPCCardFamily.kext and Chun-Nan's pached versions both of which hang during boot. Anyone got any suggestions for me? Link to comment Share on other sites More sharing options...
Murrfk Posted July 10, 2009 Share Posted July 10, 2009 I can't get this to work on my Vostro 1400 running 10.5.4. Here is the hardware information: 03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) 03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12) 03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) 03:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12) This seems to be exactly the same as everyone elses that does work. I have tried and re-tried all of the kexts, read this thread several times, re-done my disk permissions tried a variety of sd cards and it just doesn't seem to work. Anyone got any advice? Link to comment Share on other sites More sharing options...
null_x86 Posted July 13, 2009 Share Posted July 13, 2009 The Original post with the text file listing needs to be updated to the latest versions that are working, and the Dell e1505/Dell 6400 and Dell e1405, along with the Dell 9400, need to be added to compatibility, since most if not all (some Latitude models, and Vostro) use the Rioch controller, and therefore are compatible with this. Thanks! I can't get this to work on my Vostro 1400 running 10.5.4. Here is the hardware information: 03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) 03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12) 03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) 03:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12) This seems to be exactly the same as everyone elses that does work. I have tried and re-tried all of the kexts, read this thread several times, re-done my disk permissions tried a variety of sd cards and it just doesn't seem to work. Anyone got any advice? Have you tried the Dell Post installer by sonotone? http://www.insanelymac.com/forum/index.php...aded&start= Check that out, should fix your problem if this isnt working... Link to comment Share on other sites More sharing options...
Murrfk Posted July 13, 2009 Share Posted July 13, 2009 Have you tried the Dell Post installer by sonotone?http://www.insanelymac.com/forum/index.php...aded&start= Check that out, should fix your problem if this isnt working... After some scary reboots, hard restarts and endless spinning wheels....that appears to have worked. Thanks for taking the time. Much appreciated. Link to comment Share on other sites More sharing options...
max5 Posted July 25, 2009 Share Posted July 25, 2009 work on dell e6400 128M sd ok 8G sdhc ok but when i unmount 128M sd,then insert 8G sdhc ,system hang up can not change other type sd card if with out reboot. Link to comment Share on other sites More sharing options...
sniper69 Posted July 30, 2009 Share Posted July 30, 2009 Does this work with the acer aspire one A150? thanks. Does SD card support come with certain installers or does it need to be added from the kexts here? Link to comment Share on other sites More sharing options...
aliasa_anderson Posted August 18, 2009 Share Posted August 18, 2009 Did anyone try the SDHC driver developed by the voodoo team ? Link to comment Share on other sites More sharing options...
Espionage724 Posted October 17, 2009 Share Posted October 17, 2009 Is this basically like the PCI fix for Leopard posted by someone else in this topic area? (name starts with a C) Because his PCI fix for leopard fixed my ethernet also.. Link to comment Share on other sites More sharing options...
macgirl Posted October 17, 2009 Share Posted October 17, 2009 NO, this is a driver for the Internal Card Reader that is connected on the PCI Bus, the MacBook has it Card Reader connected to the USB Bus. Link to comment Share on other sites More sharing options...
Espionage724 Posted October 17, 2009 Share Posted October 17, 2009 O...hmm Looks like I have to go find a PCI fix now i suppose :/ Link to comment Share on other sites More sharing options...
aliasa_anderson Posted October 17, 2009 Share Posted October 17, 2009 Is this basically like the PCI fix for Leopard posted by someone else in this topic area? (name starts with a C) Because his PCI fix for leopard fixed my ethernet also.. do you mean Chun Nan ?? Link to comment Share on other sites More sharing options...
Espionage724 Posted October 18, 2009 Share Posted October 18, 2009 Yea exactly I tried his thing on my Snow Leopard and it KP'd. In the end, I have to reobtain my entire Snow Leopard image now.... Link to comment Share on other sites More sharing options...
Nuyel Posted December 5, 2009 Share Posted December 5, 2009 thank you, I go to test it's maybe another peripheral more on my Aspire 4720z, only don't work Consumer InfraRed but I don't have remote controller Spanish (My languaje): Gracias, voy a provalo , quisa sea otro periferico mas trabajando en mi Aspire, solo faltaria activar el CIR pero no tengo control remoto (lo cual no tendria caso al igual que el modem analogico) Link to comment Share on other sites More sharing options...
Adam_86 Posted January 9, 2010 Share Posted January 9, 2010 Hy Guys! I've a 4in1 ENE card reader in my acer travelmate 4233wlmi laptop, bit it isn't work yet. Cold you give me a good kext for this card reader? Has anybody who has the same card reader and it work? Link to comment Share on other sites More sharing options...
cs3gallery Posted February 13, 2010 Share Posted February 13, 2010 Hi everyone!!! I just downloaded and installed but to no avail!!! Does anyone know how to get this working with an HP DV6433CL? And how on earth do we find out the id of our sd card slot? Thanks! Link to comment Share on other sites More sharing options...
cs3gallery Posted February 14, 2010 Share Posted February 14, 2010 Ok. So I figured out how to get my id and all that jazz. Gosh dang it. I modified my plist with my ricoh id and when I add the kext and restart it freezes. So I need to boot into safe mode in order to delete it an restart. Does this mean I need a new iopcifamily.kext? Thanks for the help everyone! Link to comment Share on other sites More sharing options...
Guest prozac4312 Posted April 23, 2010 Share Posted April 23, 2010 no Link to comment Share on other sites More sharing options...
beth22 Posted April 29, 2010 Share Posted April 29, 2010 kext is loaded, and noticed about card, but couldn't mount it. My card is SD/2G Kingston I'm trying with another card. Thanks. Link to comment Share on other sites More sharing options...
vossia Posted June 17, 2010 Share Posted June 17, 2010 Didn´t work for me!!!! Toshiba Satellite a350 . :censored2: nothing works on this F******g Notebook!!! Tested with Sandisk SDHC 4GB Card Link to comment Share on other sites More sharing options...
thaimin Posted October 26, 2010 Share Posted October 26, 2010 I tried this out on my T510 (has a newer Ricoh: E822 Ricoh PCIe SD/MMC Host Controller and E230 Ricoh PCIe Memory Stick Host Controller). I modified the Info.plist to have the ID and it recognizes my device, but as soon as I insert a card I get that freezing problem. This is on 10.6.4. Something to note though is that it isn't completely frozen. Click the right mouse button a ton of times I will get the menu every so often. Pressing ALT+TAB shifts the position of the cursor. And pressing the power button gets me the Shutdown screen. Doing some other stuff the cursor finally beach-balled, but did not animate. Expose and dashboard still work when pressing the F-whatever keys. Volume control works. I can still open iTunes with a random key on my laptop and the dock still responds and shows it bouncing. It opens fine and I can use the keyboard. It mainly seems like Finder and the Cursor are frozen. If you ever do work on this again, I would love to use it! Edit: Another quick thing. Boot up hung until I removed the card, then everything just continued on like normal. Link to comment Share on other sites More sharing options...
ctn777 Posted November 8, 2010 Share Posted November 8, 2010 Has anyone tried this on the m11x? Link to comment Share on other sites More sharing options...
Rikoshet Posted March 12, 2011 Share Posted March 12, 2011 Any news here? Possibility to add other devices like O2 micro? Thanks! Link to comment Share on other sites More sharing options...
sector-chan Posted May 15, 2011 Share Posted May 15, 2011 Hi, i have a vostro 3700 with the R5U822 Ricoh card reader, ive tried all kext here in this topic and i installed all with kext utility but none worked. Has someone experience with this Card Reader Link to comment Share on other sites More sharing options...
TRJS Posted June 4, 2011 Share Posted June 4, 2011 A kind of "workaround" if the driver doesn't work and your computer has a PC Card-slot: You can buy a cheap PCMCIA SD card reader in form of a PC Card (must be compatible with OS X 10.x). Leopard still supports PC Cards, so installing is not a problem. For Snow Leopard users: SL doesn't support PC Cards any more - but fortunately it is possible to add this feature to SL. Prerequisite are the following drivers: IOPCIFamily.kext (driver for the PCMCIA bus): Best you use this derivative of Chun-Nan's kext found in this thread. I used oldnapalm's IOPCIFamily-115 (download the IOPCIFamily.kext.zip-file), you can also check if there was a newer version realeased in the meantime. IOPCCardFamily.kext (driver for the PC Card slot): I used the one included in Chun-Nan's "10.5.6.only"-IOPCMCIAFamily-kext, see this MediaFire-folder. It's located inside the IOPCMCIAFamily-kext in the plugin-folder. ApplePCCard16ATA.kext & ApplePCCardATA (drivers used by the PCMCIA SD card reader): They can be found for example in the Extensions-folder of OS X Leopard. I bundled these kext's in the attached file: PCMCIASDCardReader.zip Install these kext's using for example Kext Wizard and reboot. That's it, now the PCMCIA SD card reader is recognized and you can use SD cards at least internally without any USB-adapters. Link to comment Share on other sites More sharing options...
bisk Posted March 20, 2012 Share Posted March 20, 2012 This is obviously a really old and nearly dead thread but I figured no harm to provide another tidbit ... Doesn't work on my HP6910p running vanilla SL 10.6.8 - 32 bit. My SD reader is ... 02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20) 02:06.4 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 10) I can see a new StorageDevice stub properly attached to the appropriate device id in the IORegistry but when I insert an sD card, no new device is recognized to mount. I get the exact same behavior with both VoodooSDHC.kext_x86_64 and IOSDHCIBlockDevice.kextfc1 whether installed in /E/E or /S/L/E. Bummer, cuz' everything else works except that I do still need to get the CPU cooling better. bisk Link to comment Share on other sites More sharing options...
Recommended Posts