[HOW TO] Getting IDT Audio Working

[Boombeng]

Anyone got the sbwoofer on the dv7 working yet?

 

May be it can help ??

 

http://forum.insanelymac.com/index.php?s=&...t&p=1017336

[metamasterplay]

Thank's for the reply. Will try this as soon as I can. Hope it works, i'm a total addicted to iTunes and music.

This thing is... Mac world is totally new to me, so a little help will, euh, help . I know how to install a kext file but where can i get the "MaximumBootBeep", "MuteGPIO" and "SignalProcessing" options?

thank's again.

[Boombeng]

Well I can not give more details than Rimini gave in his original thread :

 

1. Make a copy of your AppleHDA.kext to your desktop or a folder. It's in /System/Library/Extensions/

2. Right click on it and select "Show Package Contents". This will open a new finder window.

3. Navigate to "Contents/Plugins/" and right click on "AppleHDAPlatformDriver.kext" and select "Show Package Contents" again, opening yet another finder window (a kext within a kext).

4. In this one, right click "Contents/Info.plist" and open it, or right click and select "Open With/Property List Editor".

5. Now you navigate down the tree (keep clicking each subsequent direction triangle) until you reach "PathMapRef" and then open "0" and you'll see all the various inputs and outputs enumerated here.

 

At this point you might want to look around at the various settings. Note that the "LineOut" has no values and that the SignalProcessing assigned to IntSpeaker includes Muting, Gain management and Equalization. DSP is also used on the mic.

 

6. Select each item within the "IntSpeaker" item ("MaximumBootBeep", "MuteGPIO" and "SignalProcessing") and click on the "Delete" button at the top of the Plist Editor window so that "IntSpeaker" has no entries (like "Line Out"). (In principle you really only need to get rid of "SignalProcessing" cause that's what's killing the bass, but I figured if I was using this out as a line out, then why not make it the same. Up to you.)

7. Save the plist and close plist editor and the two "Content" finder windows.

8. Now replace the original kext. I find Kext Helper 0.7 works fine for this; open Kext Helper and drag and drop your modded kext on it's window, and click on Easy Install... wait 20 seconds or so before rebooting (let the HD finish thrashing about)

9. Reboot and you're done.

 

You need "Property List editor", you can google to download this application...

Also, Mr.Krabs found that for dell Studio IDT Audio just needed to delete "SignalProcessing" and keep "MaximumBootBeep" and "MuteGPIO" so you have to try both and may be bass will be back...

[ckybam69]

ok so i am using sabres' kext and everything is working mic/audio for my hp dv5t except when i wake the computer from sleep my audio disappears. is there a fix for this? i have tried everything. also is there anything i can manually do to get audio back without having to restart the computer?

[bagulhoz]

Hi guys,

 

I already try to config my audio on Ideneb 1.3 10.5.5, but OsX don't find and istall any device.

I read this post and try to install almost the dumps that i've download in hdapatcher 1.6 and delete applehda and/or alcinkject, use disk utility, etc., but never find the audio device.

 

This is my config:

 

Ideneb works for me with the line comand: -v -x cpus=1

 

Mobo: pcchips p17g proc intel core2duo 2GB DDR2

 

Sound: SigmaTel STAC9221 A2 @ Intel 82801GB ICH7 - High Definition Audio Controller [A-1]

HDAUDIO\FUNC_01&VEN_8384&DEV_7682&SUBSYS_10192633&REV_1036

HDAUDIO\FUNC_01&VEN_8384&DEV_7682&SUBSYS_10192633&REV_1036\4&CC92D09&0&0001

Device ID 8086-27D8

Sub System ID 1019-2633

Device class: 0403 (High Definition Audio)

 

I already try the 9221D.txt /9221.txt and many others:

I think this is my dump, but doesn't work...

 

Codec: SigmaTel STAC9221 A2

Address: 0

Vendor Id: 0x83847682

Subsystem Id: 0x10192633

Revision Id: 0x103601

No Modem Function Group found

Default PCM:

rates [0x7e0]: 44100 48000 88200 96000 176400 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1

Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1

Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0x65 0x65]

Power: 0x0

Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0x65 0x65]

Power: 0x0

Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0xff 0xff]

Power: 0x0

Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0x65 0x65]

Power: 0x0

Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo

Power: 0x0

Connection: 1

0x17

Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo

Power: 0x0

Connection: 1

0x18

Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital

PCM:

rates [0x7e0]: 44100 48000 88200 96000 176400 192000

bits [0xe]: 16 20 24

formats [0x5]: PCM AC3

Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital

PCM:

rates [0x160]: 44100 48000 96000

bits [0xe]: 16 20 24

formats [0x5]: PCM AC3

Connection: 1

0x11

Node 0x0a [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x08173f: IN OUT HP Detect

Pin Default 0x2221401f: [Jack] HP Out at Sep Front

Conn = 1/8, Color = Green

Pin-ctls: 0xc0: OUT HP

Connection: 1

0x02

Node 0x0b [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x081737: IN OUT Detect

Pin Default 0x22a19020: [Jack] Mic at Sep Front

Conn = 1/8, Color = Pink

Pin-ctls: 0x24: IN

Connection: 1

0x04

Node 0x0c [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x081737: IN OUT Detect

Pin Default 0x01119012: [Jack] Speaker at Ext Rear

Conn = 1/8, Color = Pink

Pin-ctls: 0x40: OUT

Connection: 1

0x03

Node 0x0d [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x08173f: IN OUT HP Detect

Pin Default 0x01114010: [Jack] Speaker at Ext Rear

Conn = 1/8, Color = Green

Pin-ctls: 0x40: OUT

Connection: 1

0x02

Node 0x0e [Pin Complex] wcaps 0x400081: Stereo

Pincap 0x0824: IN Detect

Pin Default 0x40f000f1: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x20: IN

Node 0x0f [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x0837: IN OUT Detect

Pin Default 0x01113011: [Jack] Speaker at Ext Rear

Conn = 1/8, Color = Blue

Pin-ctls: 0x40: OUT

Connection: 1

0x05

Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital

Pincap 0x0810: OUT

Pin Default 0x01411130: [Jack] SPDIF Out at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x40: OUT

Connection: 3

0x08* 0x17 0x19

Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital

Pincap 0x0810024: IN EAPD Detect

Pin Default 0x40f000f2: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x00:

Power: 0x0

Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0

Amp-Out vals: [0x01 0x01]

Connection: 7

0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a

Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0

Amp-Out vals: [0x03 0x03]

Connection: 7

0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a

Node 0x14 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out

Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0

Amp-Out vals: [0x00]

Node 0x15 [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x9033012e: [Fixed] CD at Int N/A

Conn = ATAPI, Color = Unknown

Pin-ctls: 0x20: IN

Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono

Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In

Amp-In caps: N/A

Amp-In vals: [0x0b 0x0b]

Connection: 1

0x12

Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In

Amp-In caps: N/A

Amp-In vals: [0x0b 0x0b]

Connection: 1

0x13

Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital

Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital

Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital

Pincap 0x0810: OUT

Pin Default 0x40f000f3: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x00:

Connection: 1

0x1a

 

Please help me, You're my only hope!!!

And Sorry for my bad english...

[chassler]

ex. mine is 0x293e8086

 

your guna love this but i think u have the exact same setup as me lol try my kext with my pinconfig in it:

 

http://rapidshare.com/files/156344109/111D...pleHDA.kext.zip

 

I'm quoting this post because this kext works on my HP dv3510nr...almost.

 

I originally installed this kext on an iDeneb installation 10.5.5. I used this kext out of sheer desperation as I had been attempting to make my own following the guide. To my surprise...it worked! Everything worked, including the built in mic.

 

Fast forward a bit to an iATKOS v5i installation, vanilla everything. A successful upgrade to 10.5.6 straight from software update. I am running the 9.6 vanilla kernel. The system is running much better now and this same kext still gives me audio. However, my microphone shows no input controls in system preferences.

 

Here's the kicker, my device id is 0x103C1505

The binary in that kext and the information in the plists all points to this poster's device id which is 111D76B2. I believe the reason the sound works is because we share the same (pin config, oicpprimary match?, I don't know what it's called) but it's 0x293e8086 That does match my system. What I don't understand is how the microphone somehow got lost in the switch from iDeneb to iATKOS.

 

I'm very diligent about searching for my answers via google and various forums, but this one is stumping me. Any help is appreciated.

 

I have attached two screenshots of my system.

[ckybam69]

Hey, I successfully got this driver installed, (yay sound works!)

my device id = 0x111D76B2

 

and I used a pre-modded kext that was posted here, but I'm getting a kernel panic on AppleHDA.kext on shutdown.

 

I have ALCInject removed, and I've repaired the permissions with diskutil. I saw someone else on this forum repaired disk permission with OnyX to get rid of this problem, is this necessary? Is there any difference with using OnyX to fix my kext permissions, and has any1 else encountered this this kernel panic problem with these drivers on shutdown/restart.

 

Best

Arthur

you can repair permissions properly by grabbing a terminal and typing this 'sudo chown -R root:wheel /System/Library/Extensions' enter ur password then 'sudo chmod -R 755 /System/Library/Extensions' then 'sudo touch /System/Library/Extensions'

enter these without the ' also do this any time u change a kext or touch the extensions folder

 

 

I'm quoting this post because this kext works on my HP dv3510nr...almost.

 

I originally installed this kext on an iDeneb installation 10.5.5. I used this kext out of sheer desperation as I had been attempting to make my own following the guide. To my surprise...it worked! Everything worked, including the built in mic.

 

Fast forward a bit to an iATKOS v5i installation, vanilla everything. A successful upgrade to 10.5.6 straight from software update. I am running the 9.6 vanilla kernel. The system is running much better now and this same kext still gives me audio. However, my microphone shows no input controls in system preferences.

 

Here's the kicker, my device id is 0x103C1505

The binary in that kext and the information in the plists all points to this poster's device id which is 111D76B2. I believe the reason the sound works is because we share the same (pin config, oicpprimary match?, I don't know what it's called) but it's 0x293e8086 That does match my system. What I don't understand is how the microphone somehow got lost in the switch from iDeneb to iATKOS.

 

I'm very diligent about searching for my answers via google and various forums, but this one is stumping me. Any help is appreciated.

 

I have attached two screenshots of my system.

 

this might not help much but the 0x103C1505 is your subsystem id. the injector sets this so basically what i am saying is dont trust system profiler. also check your subsystem id and vista and see if it matches this.

[jjones]

RaidenII: nVidia HDMI @ intel 82801ib ich9, devid 000610de is not HDA controller. It's another Audio Card play through HDMI interface. We are still waiting for its driver.

 

Any news on getting HDMI audio from this hardware?

 

Just for kicks I added entries in the AppleHDAController info.plist for the modem and hdmi (codec1 and codec2 respectively on linux). The '1' entry in HDAConfigDefault is pretty sparse but for '2' I used the rules of pin config formatting for this:

 

<20571c10 20571d01 20571e56 20571f18 20771c21 20771d01 20771e56 20771f58 20971c22 20971d01 20971e56 20971f58 20b71c23 20b71d01 20b71e56 20b71f58 20d71c24 20d71d01 20d71e56 20d71f58>

 

But no luck. Need the binary.

 

RaidenII: nVidia HDMI @ intel 82801ib ich9, devid 000610de is not HDA controller. It's another Audio Card play through HDMI interface. We are still waiting for its driver.

 

Any news on getting HDMI audio from this hardware?

 

Just for kicks I added entries in the AppleHDAController info.plist for the modem and hdmi (codec1 and codec2 respectively on linux). The '1' entry in HDAConfigDefault is pretty sparse but for '2' I used the rules of pin config formatting for this:

 

<20571c10 20571d01 20571e56 20571f18 20771c21 20771d01 20771e56 20771f58 20971c22 20971d01 20971e56 20971f58 20b71c23 20b71d01 20b71e56 20b71f58 20d71c24 20d71d01 20d71e56 20d71f58>

 

But no luck. Need the binary.

[Silverstone]

After update 10.5.6 my audio don't work ! Help

[pcmantinker]

Thanks for the great guide. I've been looking for a sound fix for months for my OSX86 install on my laptop. Works beautifully.

[Glauber Lobo]

Hi,

age_sabres18, please, help me guy.

 

My english is very poor to understand all the instructions correctly.

 

My card is IDT 92HD202.

 

Please make me to get sound !!

codec.txt.tar.gz

codec.txt

[ole2]

hizz

i have a compaq mini 700el

with a IDT card with ID Ven 111 Dev 7608 rev 1001

i have installed ideneb 1.3 10.5.5

everything works except sound even sleep mode.how can i enable the sound card?

if i enable sound card i will post here all the files and instructions "how to" in this post:

 

http://forum.insanelymac.com/index.php?sho...p;#entry1011580

P.S in mac the ID given is : 0x103c361A

thanks anticipated

 

it's confirmed on some linux forum, working configuration require to enable MSI:

My current setup:

 

* Ubuntu 8.10 - kernel 2.6.27-7-generic

* System fully up-to-date, all updates installed

* Standard ALSA drivers

* Added options snd-hda-intel enable_msi=1 to /etc/modprobe.d/alsa-base

* No additional kernel options (like pci=noacpi)

 

I'm afraid without MSI-X enabled in AppleHDA driver, sound on compaq mini 700 will not work.

[psirus]

DO I have to delete the HDAENABLER.KEXT if my applehda.kexts is setuped?

[Supercar1000]

Hi there... I've worked 2 days on getting my iPC OS X 10.5.6 up and rooling.. the only simple problem is that I have no sound... I've tried almost everything on this topic to make it work but.. I juste don't understaind why, it dosen't work.

On my Sound preferences I have no device!

 

Can somebody make a final clear to understaind tutorial on how to make work this thing....

 

Thanks alot fo your futur help!

 

Another question... Is a USB headset a device for the sound preferances (Can it remplace my integrated sound device ?)??

[sammi93]

hello, i am new to mac and i am desperate to have my sound working.. I have a dell studio 1737 and i use kernel voodoo on ideneb 10.5.6. My IDT is 92HD73C1 and the hex is 102802A0. in decimal that is 271057568. I dont understand how to do this. And i am not sure if i have the correct codes and ID's. can someone please help me.

 

thank you

[Ivan G.]

Just in case if this might help someone - I have patched AppleHDA.kext and have internal connectors working now (sound and mic). My laptop model: HP 2754TX, Intel High Definition Audio ID: 0x103C30CD

 

and here's my Linux dump of the sound codec:

 

Codec: Conexant CX20549 (Venice)

Address: 0

Vendor Id: 0x14f15045

Subsystem Id: 0x103c30cd

Revision Id: 0x100100

Modem Function Group: 0x2

Default PCM:

rates [0x140]: 48000 96000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Default Amp-In caps: N/A

Default Amp-Out caps: N/A

GPIO: io=0, o=0, i=0, unsolicited=0, wake=0

Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out

Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1

Amp-Out vals: [0x23 0x23]

Pincap 0x0810014: OUT EAPD Detect

EAPD 0x2: EAPD

Pin Default 0x95170110: [Fixed] Speaker at Int Top

Conn = Analog, Color = Unknown

DefAssociation = 0x1, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x40: OUT

Unsolicited: tag=00, enabled=0

Power: setting=D0, actual=D0

Connection: 2

0x19 0x17*

Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out

Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1

Amp-Out vals: [0x23 0x23]

Pincap 0x08113c: IN OUT HP Detect

Vref caps: HIZ 80

Pin Default 0x0221401f: [Jack] HP Out at Ext Front

Conn = 1/8, Color = Green

DefAssociation = 0x1, Sequence = 0xf

Pin-ctls: 0xc0: OUT HP VREF_HIZ

Unsolicited: tag=37, enabled=1

Power: setting=D0, actual=D0

Connection: 2

0x19 0x17*

Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out

Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1

Amp-Out vals: [0xab 0xab]

Pincap 0x08113c: IN OUT HP Detect

Vref caps: HIZ 80

Pin Default 0x62a1902e: [N/A] Mic at Sep Front

Conn = 1/8, Color = Pink

DefAssociation = 0x2, Sequence = 0xe

Pin-ctls: 0x24: IN VREF_80

Unsolicited: tag=00, enabled=0

Power: setting=D0, actual=D0

Connection: 2

0x19* 0x17

Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital

Pincap 0x0810: OUT

Pin Default 0x21451130: [Jack] SPDIF Out at Sep Rear

Conn = Optical, Color = Black

DefAssociation = 0x3, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x40: OUT

Connection: 1

0x18

Node 0x14 [Pin Complex] wcaps 0x400081: Stereo

Pincap 0x081124: IN Detect

Vref caps: HIZ 80

Pin Default 0x97a701f0: [Fixed] Mic at Int Riser

Conn = Analog, Color = Unknown

DefAssociation = 0xf, Sequence = 0x0

Misc = NO_PRESENCE

Pin-ctls: 0x24: IN VREF_80

Unsolicited: tag=00, enabled=0

Node 0x15 [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x54330121: [N/A] CD at Int Right

Conn = ATAPI, Color = Unknown

DefAssociation = 0x2, Sequence = 0x1

Misc = NO_PRESENCE

Pin-ctls: 0x00:

Node 0x16 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out

Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1

Amp-Out vals: [0x06]

Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In

Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1

Amp-In vals: [0x10 0x10] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Power: setting=D0, actual=D0

Connection: 5

0x19 0x14 0x12 0x11 0x15

Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital

Converter: stream=0, channel=0

Digital:

Digital category: 0x0

PCM:

rates [0x40]: 48000

bits [0x6]: 16 20

formats [0x5]: PCM AC3

Node 0x19 [Audio Output] wcaps 0xc11: Stereo R/L

Converter: stream=0, channel=0

PCM:

rates [0x540]: 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Power: setting=D0, actual=D0

Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In R/L

Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1

Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Converter: stream=0, channel=0

SDI-Select: 0

Power: setting=D0, actual=D0

Connection: 5

0x17 0x14* 0x12 0x11 0x15

Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono

 

Attaching the modified kext and HDALoader.kext so you can try to use this one.

HP_IntelSound_Kexts.zip

[Guest BuildSmart]

If your using a DSDT.aml file you can do away with HDAEnabler.kext and fix audio in DSDT for a better solution.

[underball]

Hy,

 

I have a problem with IDT 92hd73e on 10.5.6 on VMWare. Tried all found solutions on this forum (AppleHDAPatcher, editing AppleHDA.kext ... ) and no sound so far on my Intel DG45ID.

My hardware id: 111d7676 subsy[s 80865002 rev 1002

 

Linux codec dump attached.

 

Help would be appreciated.

codec.txt

 

I have this same Motherboard, and can't get the IDT sound to work either.

 

Anyone have any idea on this setup?

[the_diller]

I have this same Motherboard, and can't get the IDT sound to work either.

 

Anyone have any idea on this setup?

 

Yep. DP45SG with IDT 92HD73E audio, still no sound. Followed this guide, pin config guide, and tried azalia audio also. I am thinking we need to pay attention to the NODEID in the controller plist...not sure though. It seems that after editing the kexts the ports are not correctly configured as well some other issues involving the InputAmp and other internal devices. I don't really understand any of it, but I am trying to learn...several posts back someone brings it up, but I haven't been able to understand/apply this to my board. I will surely post my kext if I can figure it out, but I am sure someone smarter will beat me to it.

 

Keep up the hard work everyone, we will get it eventually!

Dylan Manthei

[drewkie]

Hey,

 

I would appreciate it if anyone could help me get the audio working for my HP Mini 1030NR. I installed using iDeneb 1.3 10.5.5 and got everything to work except for audio. I have tried performing the hexedit but honestly do not know where to begin. My device ID = 0x103C361A and dec is 272381466. If anyone could help I would appreciate it.

 

Thanks in advance.

 

Okay I finally figured how to follow the guide to fix the audio. I did not do the pinconfig because I no longer have windows on the system. But when I followed the steps system profiler shows the speakers and mic as internal and mic as 1/8 jack but no sound icon and nothing in system preference pane. Went back to the original kext from myhpmini.com and got sound icon but profiler shows everything as 1/8 jack with no internal speakers. Any suggestions?????

 

Thanks.

[juanbosco]

Hi all,

 

I would appreciate if someone in the forum could help me to get the audio working on my PCChips P17G Motherboard,

AUDIO CODEC: Intel High Definition Audio Specification Rev. 1.0 Compliant.

 

Already try some sugestions here but dont work...

 

I am using JAS Mac os 10.4.8, and all work OK...But can not get the sound to work.

 

Thanks for your help!!!!

[samjoandco]

I am on IPC 10.5.6.

I cannot get it to work after following all instructions from first port.

HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_103C30FC&REV_1003

HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_103C30FC

 

Vendor ID: 111D 76B2 SUB Vendor: 103C 30FC

 

Vendor ID: 1002 791A SUB Vendor: 0079 1A00

Does anybody have a working kext with the above mentioned vendor id?

[samjoandco]

I am on IPC 10.5.6. & cant get it to work after following all instructions from first port.

Does anybody have a working kext with the above mentioned vendor id?

What should be the codecid in IOPCIPrimaryMatch?

 

Here are the details printed in Vista :

HDAUDIO\FUNC_01&VEN_1002&DEV_791A&SUBSYS_00791A00&REV_1000\5&344C0D81&0&0001
 Name: High Definition Audio Device
 Hardware ID's:
	 HDAUDIO\FUNC_01&VEN_1002&DEV_791A&SUBSYS_00791A00&REV_1000
	 HDAUDIO\FUNC_01&VEN_1002&DEV_791A&SUBSYS_00791A00
 Compatible ID's:
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_960F&VEN_1002&DEV_791A&REV_1000
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&VEN_1002&DEV_791A&REV_1000
	 HDAUDIO\FUNC_01&VEN_1002&DEV_791A&REV_1000
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_960F&VEN_1002&DEV_791A
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&VEN_1002&DEV_791A
	 HDAUDIO\FUNC_01&VEN_1002&DEV_791A
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_960F&VEN_1002
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&VEN_1002
	 HDAUDIO\FUNC_01&VEN_1002
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_960F
	 HDAUDIO\FUNC_01&CTLR_VEN_1002
	 HDAUDIO\FUNC_01&GF&VEN_1002&DEV_791A&SUBSYS_00791A00&REV_1000
	 HDAUDIO\FUNC_01
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_103C30FC&REV_1003\4&11E8BB83&0&0001
 Name: IDT High Definition Audio CODEC
 Hardware ID's:
	 HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_103C30FC&REV_1003
	 HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_103C30FC
 Compatible ID's:
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_4383&VEN_111D&DEV_76B2&REV_1003
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&VEN_111D&DEV_76B2&REV_1003
	 HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&REV_1003
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_4383&VEN_111D&DEV_76B2
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&VEN_111D&DEV_76B2
	 HDAUDIO\FUNC_01&VEN_111D&DEV_76B2
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_4383&VEN_111D
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&VEN_111D
	 HDAUDIO\FUNC_01&VEN_111D
	 HDAUDIO\FUNC_01&CTLR_VEN_1002&CTLR_DEV_4383
	 HDAUDIO\FUNC_01&CTLR_VEN_1002
	 HDAUDIO\FUNC_01&GF&VEN_111D&DEV_76B2&SUBSYS_103C30FC&REV_1003
	 HDAUDIO\FUNC_01

[juanbosco]

Hi again,

 

As I mentioned before, I am using JAS Mac os 10.4.8 in my PCChips P17G Motherboard (AUDIO CODEC: Intel High Definition Audio Specification Rev. 1.0 Compliant), but the sound dont work....

 

Does someone in the forum have this PCChips P17G Motherboard?

 

Anyone knows how to get the sound to work?

 

Thanks for your help!!!!

[hambola]

Yep. DP45SG with IDT 92HD73E audio, still no sound. Followed this guide, pin config guide, and tried azalia audio also. I am thinking we need to pay attention to the NODEID in the controller plist...not sure though. It seems that after editing the kexts the ports are not correctly configured as well some other issues involving the InputAmp and other internal devices. I don't really understand any of it, but I am trying to learn...several posts back someone brings it up, but I haven't been able to understand/apply this to my board. I will surely post my kext if I can figure it out, but I am sure someone smarter will beat me to it.

 

Keep up the hard work everyone, we will get it eventually!

Dylan Manthei

 

 

Yeah I'm using the DP45SG as well. Tried this guide, as well as the pin config, no cigar. Took me forever, but I tried to be accurate to make sure I got all the steps right. It doesn't seem like anyone with that IDT audio has got it working.

 

On a side note, I don't have USB working either (except the keyboard mouse if they're plugged in from before). Which distro and/or kext did you use for USB on this board?