Uscg.Matthew Posted February 9, 2009 Share Posted February 9, 2009 IT WORKS!!! Thank you so so so much! Dell xps 410 with the 82566dc. FINALLY can remove that crappy pci card. 10.5.5 <3 Link to comment Share on other sites More sharing options...
Aratmanecomus Posted February 11, 2009 Share Posted February 11, 2009 Works in OSX 10.5.6, but only when I boot with -f, otherwise it appears as disconnected. Thank You very Much! Link to comment Share on other sites More sharing options...
rojaro Posted February 11, 2009 Share Posted February 11, 2009 Just noticed that Guijin Ding - the author of this driver - has posted the source code to goole. -> http://code.google.com/p/82566mm-osx-driver/ Link to comment Share on other sites More sharing options...
dr.vox Posted February 14, 2009 Share Posted February 14, 2009 Ok, scratch my last couple of posts, it's working now. No idea why, but it is. Few restarts, few redownloads (of the same file, though) and it works. No hanging at white Apple screen at boot either. Awesome. Thanks very much, Guijin. Also experiencing the problems with speed, I think. Average speed I'm seeing is around 3.8~4.3MB/s. (I'm copying music from my HFS+ partitioned 7200rpm Media HD over an ethernet cable to a WAG160N Linksys router, through that to a MyBook World Edition.) Link to comment Share on other sites More sharing options...
rojaro Posted February 15, 2009 Share Posted February 15, 2009 well, the fastest speed i got so far were 544kb/s while copying a file from another machine in the local network ... what type of ethernet controller do you have dr.vox? Link to comment Share on other sites More sharing options...
dr.vox Posted February 15, 2009 Share Posted February 15, 2009 Oh, now I feel a bit better. : P And I should point out now that I tried copying two large files to two different locations (Windows XP machine & previously mentioned MyBook) and got a peak speed of about 11MB/s, averaging about 9MB/s, I think. So I don't quite know why it's only wanting to write ~4MB/s to each device. I'm running a Dell E520, so I think I'm on an 82562V. Link to comment Share on other sites More sharing options...
Diffuse Posted March 1, 2009 Share Posted March 1, 2009 Hey guys, I've been trying to get this to work all night now without success (iDeneb 10.5.6). When using kextload I get an error saying that sha1_* is an undefined symbol which is then followed by a link/load error. It's 5:30AM and I'm too tired to boot it back up to get the exact error, but I assure you it's very close. If anyone could help me out, it would GREATLY be appreciated. Thanks in advance! Link to comment Share on other sites More sharing options...
Diffuse Posted March 1, 2009 Share Posted March 1, 2009 Hey guys, I've been trying to get this to work all night now without success (iDeneb 10.5.6). When using kextload I get an error saying that sha1_* is an undefined symbol which is then followed by a link/load error. It's 5:30AM and I'm too tired to boot it back up to get the exact error, but I assure you it's very close. If anyone could help me out, it would GREATLY be appreciated. Thanks in advance! Figured it out this morning.. Had some wrong chipset drivers, oops! All is well now, my hardware works 100%, yaaaaaaaay. Link to comment Share on other sites More sharing options...
DarkPrime Posted March 8, 2009 Share Posted March 8, 2009 okay so Im back after giving up on osx86 now that you can use the 82566DC onboard NIC Im gonna give it a go what should I use? what I need again? lol sorry Link to comment Share on other sites More sharing options...
gid501 Posted April 3, 2009 Share Posted April 3, 2009 my 82567LM works now, on 10.5.5 ideneb. big thanks. works on intel DX58S0 also, using XxX 10.5.6 installed using osx86tools (two clicks, in the GUI, otherwise move to /System/Library/Extensions, do a chmod root:wheel on the files an rebuild the kextcache -k /System/Libraryr/Extensions) sweet. Now only ALC889 remaining after much tweaking (Core i7 920 - booting after busratio=20 cpus=1). Already gets an impressive 7940 geekbenchs and feels REALLY fast. If you want to know details, please write. maybe I'll open a thread, since I haven't really found much on the topic of successful DX58S0 (DX58SO) Installations here or on hackint0sh Link to comment Share on other sites More sharing options...
glonq Posted April 5, 2009 Share Posted April 5, 2009 Do I need to do anything special to make this work? The XxX distro I'm using includes this driver. Is it enough that I checkbox the driver under "Customize" when I install OS X, or do I need to do anything else post-installation to activate the driver? Link to comment Share on other sites More sharing options...
jazzminos Posted April 6, 2009 Share Posted April 6, 2009 to dingguijin Hi. It seems that You have rich experience in driver coding for intel ethernet. Can You help me to solve a problem with Intel Pro 100VE in 10.5.6. The topic is here http://www.insanelymac.com/forum/index.php...0&start=180 . Your help will be extremely valuable. With great respect, jazzminos. Link to comment Share on other sites More sharing options...
lsdelirious Posted May 7, 2009 Share Posted May 7, 2009 Finding this thread has made my day... I've been struggling with ethernet and sound for my DX48BT2 board for months with no luck, almost given up since final cut/shake would crash without ethernet.... however I'm not in the clear just yet... before I installed this kext, the ethernet was greyed out and said no device. Now it seems to recognize it, but it tells me the cable is unplugged when I know the connection is good because my system is a dual boot with vista x64 and vista gets online just fine Do I need to do anything special? Could it be a conflict with another kext? My System: Q9550 DX48BT2 GeForce 8800GT 1GB DDR3 8GB 1333 DDR3 500GB SATA II (and 4x320GB RAID0 for Vista but those are not recognized) iatkos 5.0 also I tried the 9274D kext for my onboard sound, which now appears as if it works but I don't actually hear any sound from my speakers? kexts installed using Kext Helper Anyone out there gotten ethernet & Sound working for an intel DX48BT2 board I would really appreicate your help - thanks! Link to comment Share on other sites More sharing options...
JGAN Posted May 13, 2009 Share Posted May 13, 2009 **UPDATE** Working on the DC7700 Intel 82556DM, my bad for not following the instructions closely.I am only getting speeds of 10mb, not 100 or 1000 even when I force the speed its only 10 Tried it on my HP DC7700 with a 82556DM, no workie.. So does this work on intel 82566dm or not? and if it does, how do i install it? Link to comment Share on other sites More sharing options...
brokenflipside Posted May 14, 2009 Share Posted May 14, 2009 After around one month part-time work. I ported the Linux e1000e driver to my Laptop (Lenovo T61p) running Hackintocsh Mac OS X (Leopard 10.5.3). Detail in my blog http://techresearchinfo.blogspot.com. Guijin Ding I have been fighting to get LAN to work for a very long time, i have followed dingguijin walkthrough and I have no response from the NIC every time. I download the .tar.gz file that was upload 11-2008 i then edit the contents/info.plst file to match the versions located with kextstat I save and quit I use kext helper to upload the new 82566mm driver, it says successful cross fingers and reboot. I reboot, no internet... If i go to about this mac>system profiler>network> at the bottom of the list ethernet is listed there, and it gives a mac address, full duplex, and auto select. What am I missing, do i need to insert a device ID somewhere? This is a totally vanilla, retail copy. I have not set up macloader yet but once i get internet working i will set up macloader. By the way I am using the intel dp35dp mobo....I appreciate any direction you can give. Thanks a lot. Link to comment Share on other sites More sharing options...
dr.vox Posted May 14, 2009 Share Posted May 14, 2009 Not meaning to insult your intelligence -- it happens to the best of us -- but are you sure (100% sure, i.e. go and check) the NIC setting in your BIOS is set to enabled. Link to comment Share on other sites More sharing options...
SMF Posted May 22, 2009 Share Posted May 22, 2009 I have been fighting to get LAN to work for a very long time, i have followed dingguijin walkthrough and I have no response from the NIC every time. I download the .tar.gz file that was upload 11-2008 i then edit the contents/info.plst file to match the versions located with kextstat I save and quit I use kext helper to upload the new 82566mm driver, it says successful cross fingers and reboot. I reboot, no internet... If i go to about this mac>system profiler>network> at the bottom of the list ethernet is listed there, and it gives a mac address, full duplex, and auto select. What am I missing, do i need to insert a device ID somewhere? This is a totally vanilla, retail copy. I have not set up macloader yet but once i get internet working i will set up macloader. By the way I am using the intel dp35dp mobo....I appreciate any direction you can give. Thanks a lot. So I am assuming that you are not getting an ip address - correct? SMF Link to comment Share on other sites More sharing options...
evilgeek Posted June 22, 2009 Share Posted June 22, 2009 Any chance of getting the resume from standby/hibernation bug fixed? Basically I have to REBOOT after resuming from any standby or hibernation after my laptop takes a sleep. Shouldn't be too hard as all you need to do is to reload the driver I think. Link to comment Share on other sites More sharing options...
aliab Posted June 25, 2009 Share Posted June 25, 2009 Thank's dinguijin Work fine with IntelDQ965gf and 10.5.7 Link to comment Share on other sites More sharing options...
IntelCubeDreamer Posted July 10, 2009 Share Posted July 10, 2009 Just another success on a Intel 82567LM in a HP Elitebook 8530p installed with OSX86Tools on 10.5.7. Thanks ! Link to comment Share on other sites More sharing options...
Takashi Odeo Posted July 28, 2009 Share Posted July 28, 2009 hello...i'm new here n i want to ask how do we check connection speed...?? cos my internet seem slow but i use 1Gb ethernet line Link to comment Share on other sites More sharing options...
scalar Posted July 30, 2009 Share Posted July 30, 2009 I tried an older version of this with my Intel 82575EB a while back and it didn't work, anyone seen any success recently? Link to comment Share on other sites More sharing options...
$P@RT@N Posted August 4, 2009 Share Posted August 4, 2009 hey men i got the same motherboard but i cant get it work some1 help me plz Link to comment Share on other sites More sharing options...
trafik Posted August 12, 2009 Share Posted August 12, 2009 Hi, I got a X61 tablet. I install Intel82566MM.kext (network driver) with kext helper and reboot and network still not working. Please help! How can I do perfect? Link to comment Share on other sites More sharing options...
bcdove Posted August 24, 2009 Share Posted August 24, 2009 After around one month part-time work. I ported the Linux e1000e driver to my Laptop (Lenovo T61p) running Hackintocsh Mac OS X (Leopard 10.5.3). Detail in my blog http://techresearchinfo.blogspot.com. Guijin Ding Installed and *not* working on my Dell Optiplex 960 which has a 82567LM-3 controller. Any help in getting this working is appreciated. Link to comment Share on other sites More sharing options...
Recommended Posts