Jump to content

How to patch AppleHDA.kext from 10.5.2 and above

MadTux

By MadTux,
in Guides and Tutorials

 Share
228 posts in this topic

Recommended Posts

Big Kahuna
Big Kahuna
Posted
Posted
... as I hate how some n00bs quote a whole damn post!

Can you explain the reason you did that?

What about starting using that damn google? :D

 

Listen... you've been hostile with ANYONE that's asked a question.

 

Not everyone gets it. We appreciate how much time you've put in.. but c'mon man.

Link to comment
Share on other sites
torpie13
torpie13
Posted
Posted

Hi there,

 

I've got an Asus F3Jp. and I'm using iAktos 4.1i updated to 10.5.5. And my Codec is Realtek ALC660-VD.

 

First of all, I've deleted the AppleAzilla.kext .

 

The audio drivers I got from this thread works perfectly. The problem is that it works randomly !!!!

 

Let me explain myself: when I boot my 10.5.5, sometime the drivers are loaded, the audio then works right. And sometimes when I boot, the audio isn't working at all.

 

So, at each boot the behaviur of the drivers is different. weired, not ?

 

It's a very annoying situation.

 

1- In the "About this mac/system profiles/Hardware/Audio" :

 

- When I use AppleHDA.kext from kabyl it shows:

 

Device ID: 0x10431339

Audio ID: 12

 

- When I use ALCinject.kext it shows nothing (ie a blanc panel) Even when the audio works.

 

2- In the "About this mac/system profiles/Software/Extentions"

 

- When the sound is not working I see (depending which one is used) either ALCinject.kext or the AppleHDA.kext listed in the extentions panel.

- When the audio is working ok I dont see neither ALCinject.kext nor AppleHDA.kext listed in the extentions.

 

Off course I dont use ALCinject.kext and AppleHDA.kext at the same time. And AppleAzilla.kext is deleted.

 

3- My Linux codec dump are telling me this:

Codec: Realtek ALC660-VD

Address: 0

Vendor Id: 0x10ec0660

Subsystem Id: 0x10430000

Why the Subsystem Id is not the same as the Device ID: 0x10431339 when I use AppleHDA.kext ??

 

All the files Im talking about are attached to this post (including AppleHDA.kext and my Linux Codec dump).

 

Can you tell me what's wrong ? Can any one have a clue ?

 

I hope I was clear in my problem description.

 

Thanx alot for your help

ALC660VD.zip

Link to comment
Share on other sites
MacNutty
MacNutty
Posted
Posted

I tried but was unable to figure out my codec in Hex Editor. Can anybody help me to patch my AppleHDA so that I can get mic and headphone working, here is my audio hardware info and linux codec dump:

 

Intel High Definition Audio subsystem using configuration: 6-channel (5.1) audio subsystem (Realtek ALC888 audio codec).

Codec Dump:

codec_dump.txt

 

Please please please help me...

Link to comment
Share on other sites
easter_rebel
easter_rebel
Posted
Posted

Os X Leopard introduced new codecs, inside their AppleHDA binary so why not to use them.

 

Then as user idoc said: "strip out the junk!"

f01c2701 111d2701 111e2701 411f2701 f01c3701 111d3701 111e3701 411f3701 1f1c4701 101d4701 211e4701 021f4701 101c5701 011d5701 131e5701 991f5701 f01c6701111d6701 111e6701411f6701 401c8701981d8701 a11e8701021f8701 411c9701091d9701 a31e9701991f9701 4e1ca701301da701 811ea701021fa701 f01cc701111dc701 111ec701411fc701 2d1cd701951dd701 171ed701401fd701 301ce701111de701 451ee701021fe701

 

then you have to byte flip each double word;

<01271CF0 01271D11 01271E11 01271F41 01371CF0 01371D11 01371E11 01371F41 01471C1F 01471D10 01471E21 01471F02 01571C10 01571D01 01571E13 01571F99 01671D11 01671CF0 01671F41 01671E11 01871D98 01871C40 01871F02 01871EA1 01971D09 01971C41 01971F99 01971EA3 01A71D30 01A71C4E 01A71F02 01A71E81 01C71D11 01C71CF0 01C71F41 01C71E11 01D71D95 01D71C2D 01D71F40 01D71E17 01E71D11 01E71C30 01E71F02 01E71E45>

And after U done this go here so The King can tell U what to do with PinConfig:

PinConfig How to; The King aka XyZ:

 

I followed your instructions to the letter but when I did the Hexedit, I didn't get the display above and the only ones I could find were the ones provided by the rtf file. Please help me learn what I am doing wrong. Thanks hope to here from you soon

Link to comment
Share on other sites
cparm
cparm
Posted
Posted
I tried but was unable to figure out my codec in Hex Editor. Can anybody help me to patch my AppleHDA so that I can get mic and headphone working, here is my audio hardware info and linux codec dump:

 

Intel High Definition Audio subsystem using configuration: 6-channel (5.1) audio subsystem (Realtek ALC888 audio codec).

Codec Dump:

codec_dump.txt

 

Please please please help me...

 

maybe with this one, i think lin-in and mic-in shoulc work now

Link to comment
Share on other sites
THe KiNG
THe KiNG
Posted
Posted 

Not everyone gets it.

1. You are totally wrong!

2. He asked about codec dump, the answer is in that quote(I was hush b/c I don't see the reason to quote a whole damn long guide and ask after a such simple/stupid question), and I answer to him, if you don't belive me just type on google: "linux codec dump" and read first result...

We appreciate how much time you've put in.. but c'mon man.

I don't care about appreciations, I care when I see how people learn and share.

Listen... you've been hostile with ANYONE that's asked a question.

If you refer on my guide I specified very clear:

Please don't ask here for patched kexts or anything else, try to keep this topic just for info!

But that's other topic and people always ask stupid questions and after that read...I think it's in human dumb nature... -_-

 

Cheers!

 

@ MadTux Where are you bro? I'm waiting for you to discuss some DSDT audio stuff, you know where to find me...

Link to comment
Share on other sites
live.fx
live.fx
Posted
Posted

Hello, MadTux and all.

 

I`m post this some times ago, but NOONE answer to me in another thread:

http://forum.insanelymac.com/index.php?showtopic=135137&st=0&p=957864entry957864

 

I follow yours guide, but i can`t enable my Asus P5B AD1988 audio...

 

I do many tries, but my audio work only with Azalia (only audio out) and no line in.

 

By yours tutorial, i`m load modified AppleHDA.kext with HDAenabler.kext, but no sound.

 

the first lines of my Linux code dump is:

Codec: Analog Devices AD1988
Address: 0
Vendor Id: 0x11d41988
Subsystem Id: 0x104381e1
Revision Id: 0x100400

 

And i replace by "8819D411" in AppleHDA the "8B19D411" value. (i think, this for AD1988B - and more like my codec and must work).

 

But i have no any sounds and no any controls in audio controls.

Look to this kernel messages, please:

HDAEnabler: Copyright © 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SPAudio support:Taruga

Sound assertion "0 == pathMap_aDriverInstance" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 1653 goto Exit
Sound assertion "0 != createAudioEngines ( fPathMap_aDriverInstance )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 108 goto Exit
Sound assertion "0 == pathMap_aDriverInstance" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 1653 goto Exit
Sound assertion "0 != createAudioEngines ( fPathMap_aDriverInstance )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 108 goto Exit

 

my linux code dump attached (i`m don`t think, what someone interest look to it but may be i`m loose some important info?)

_____

 

PLease, say me - Is the possible enable OUT and Microphone IN in AD1988 for ASUS P5B ?

I`m not need any preconfigured kext and other. I can do this for myself !

But i`m need to know - is the possible?

l_dump.txt

Link to comment
Share on other sites
kidalive
kidalive
Posted
Posted

Mad Tux

I READ UR GUIDE AND TRIED MOD THE INFO.PLST PATCHED APPLEHDA.KEXT STILL GOT NO LUCK TO GET MY SPECIALL CARD WORKING.As a matter of fact after I patched it the Leopard hangs when starting up and won`t log into the system.Wired I tried both change the 880 and 662 to 883 but ends up nothing.I`m not sure what to mod now.Maybe U can give a shot,man.

Here is my card info below.

LINUX CODEC DUMP

Codec: Realtek ALC883
Address: 1
Vendor Id: 0x10ec0883
Subsystem Id: 0x10190000
Revision Id: 0x100002
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
 Converter: stream=0, channel=0
 Digital:
 Digital category: 0x0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
 Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x18 0x18]
 Converter: stream=0, channel=0
 SDI-Select: 0
 PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
 Connection: 1
 0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
 Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x18 0x18]
 Converter: stream=0, channel=0
 SDI-Select: 0
 PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
 Connection: 1
 0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
 Converter: stream=0, channel=0
 SDI-Select: 0
 Digital:
 Digital category: 0x0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
 Unsolicited: tag=00, enabled=0
 Connection: 1
 0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
 Amp-In vals:  [0x98 0x98] [0x98 0x98] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
 Connection: 10
 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
 Amp-Out vals:  [0x11 0x11]
 Connection: 2
 0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
 Amp-Out vals:  [0x11 0x11]
 Connection: 2
 0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 2
 0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 2
 0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x083e: IN OUT HP Detect Trigger
 Pin Default 0x0121101f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
 Pin-ctls: 0xc0: OUT HP
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x00 0x00]
 Pincap 0x083e: IN OUT HP Detect Trigger
 Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x40: OUT
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x083e: IN OUT HP Detect Trigger
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x083e: IN OUT HP Detect Trigger
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x02 0x02]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x08173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 0x01a19830: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
 Pin-ctls: 0x24: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x02 0x02]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x08173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 0x99a3093f: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0xf
Misc = NO_PRESENCE
 Pin-ctls: 0x24: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x08173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
 Amp-In vals:  [0x00 0x00]
 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-Out vals:  [0x80 0x80]
 Pincap 0x08173e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x20: IN VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 5
 0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
 Pincap 0x0820: IN
 Pin Default 0x593301f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
 Pincap 0x0820: IN
 Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
 Pincap 0x0810: OUT
 Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x00:
 Connection: 1
 0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
 Pincap 0x0820: IN
 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
 Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
 Processing caps: benign=0, ncoeff=17
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
 Amp-Out caps: N/A
 Amp-Out vals:  [0x00 0x00]
 Connection: 11
 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
 Amp-Out caps: N/A
 Amp-Out vals:  [0x00 0x00]
 Connection: 11
 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
 Amp-In vals:  [0x00 0x00] [0x00 0x00]
 Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
 Amp-Out vals:  [0x00 0x00]
 Connection: 2
 0x25 0x0b

 

converted codec dump in demc mode

Codec: Realtek ALC883
Address: 1
Vendor Id: 283904131
Subsystem Id: 270073856
Revision Id: 1048578
No Modem Function Group found
Default PCM:
rates [1376]: 44100 48000 96000 192000
bits [14]: 16 20 24
formats [1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 2 [Audio Output] wcaps 17: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [1376]: 44100 48000 96000 192000
bits [14]: 16 20 24
formats [1]: PCM
Node 3 [Audio Output] wcaps 17: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [1376]: 44100 48000 96000 192000
bits [14]: 16 20 24
formats [1]: PCM
Node 4 [Audio Output] wcaps 17: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [1376]: 44100 48000 96000 192000
bits [14]: 16 20 24
formats [1]: PCM
Node 5 [Audio Output] wcaps 17: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [1376]: 44100 48000 96000 192000
bits [14]: 16 20 24
formats [1]: PCM
Node 6 [Audio Output] wcaps 529: Stereo Digital
 Converter: stream=0, channel=0
 Digital:
 Digital category: 0
 PCM:
rates [1376]: 44100 48000 96000 192000
bits [30]: 16 20 24 32
formats [1]: PCM
Node 7 [Vendor Defined Widget] wcaps 15728640: Mono
Node 8 [Audio Input] wcaps 1048859: Stereo Amp-In
 Amp-In caps: ofs=8, nsteps=31, stepsize=5, mute=1
 Amp-In vals:  [24 24]
 Converter: stream=0, channel=0
 SDI-Select: 0
 PCM:
rates [352]: 44100 48000 96000
bits [6]: 16 20
formats [1]: PCM
 Connection: 1
 35
Node 9 [Audio Input] wcaps 1048859: Stereo Amp-In
 Amp-In caps: ofs=8, nsteps=31, stepsize=5, mute=1
 Amp-In vals:  [24 24]
 Converter: stream=0, channel=0
 SDI-Select: 0
 PCM:
rates [352]: 44100 48000 96000
bits [6]: 16 20
formats [1]: PCM
 Connection: 1
 34
Node 10 [Audio Input] wcaps 1049489: Stereo Digital
 Converter: stream=0, channel=0
 SDI-Select: 0
 Digital:
 Digital category: 0
 PCM:
rates [1376]: 44100 48000 96000 192000
bits [30]: 16 20 24 32
formats [1]: PCM
 Unsolicited: tag=00, enabled=0
 Connection: 1
 31
Node 11 [Audio Mixer] wcaps 2097419: Stereo Amp-In
 Amp-In caps: ofs=23, nsteps=31, stepsize=5, mute=1
 Amp-In vals:  [152 152] [152 152] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128]
 Connection: 10
 24 25 26 27 28 29 20 21 22 23
Node 12 [Audio Mixer] wcaps 2097423: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-In vals:  [0 0] [0 0]
 Amp-Out caps: ofs=31, nsteps=31, stepsize=5, mute=0
 Amp-Out vals:  [17 17]
 Connection: 2
 2 11
Node 13 [Audio Mixer] wcaps 2097423: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-In vals:  [0 0] [0 0]
 Amp-Out caps: ofs=31, nsteps=31, stepsize=5, mute=0
 Amp-Out vals:  [17 17]
 Connection: 2
 3 11
Node 14 [Audio Mixer] wcaps 2097423: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-In vals:  [0 0] [0 0]
 Amp-Out caps: ofs=31, nsteps=31, stepsize=5, mute=0
 Amp-Out vals:  [0 0]
 Connection: 2
 4 11
Node 15 [Audio Mixer] wcaps 2097423: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-In vals:  [0 0] [0 0]
 Amp-Out caps: ofs=31, nsteps=31, stepsize=5, mute=0
 Amp-Out vals:  [0 0]
 Connection: 2
 5 11
Node 16 [Vendor Defined Widget] wcaps 15728640: Mono
Node 17 [Vendor Defined Widget] wcaps 15728640: Mono
Node 18 [Vendor Defined Widget] wcaps 15728640: Mono
Node 19 [Vendor Defined Widget] wcaps 15728640: Mono
Node 20 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [0 0]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [0 0]
 Pincap 2110: IN OUT HP Detect Trigger
 Pin Default 18944031: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 1, Sequence = 15
 Pin-ctls: 192: OUT HP
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12 13* 14 15 38
Node 21 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [0 0]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [0 0]
 Pincap 2110: IN OUT HP Detect Trigger
 Pin Default 2568159504: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 1, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 64: OUT
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12 13* 14 15 38
Node 22 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [0 0]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [128 128]
 Pincap 2110: IN OUT HP Detect Trigger
 Pin Default 1091637744: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 15, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 32: IN
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12 13 14* 15 38
Node 23 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [0 0]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [128 128]
 Pincap 2110: IN OUT HP Detect Trigger
 Pin Default 1091637744: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 15, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 32: IN
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12 13 14 15* 38
Node 24 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [2 2]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [128 128]
 Pincap 530238: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 27367472: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 3, Sequence = 0
 Pin-ctls: 36: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12* 13 14 15 38
Node 25 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [2 2]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [128 128]
 Pincap 530238: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 2577598783: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 3, Sequence = 15
Misc = NO_PRESENCE
 Pin-ctls: 36: IN VREF_80
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12* 13 14 15 38
Node 26 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [0 0]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [128 128]
 Pincap 530238: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 1091637744: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 15, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 32: IN VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12* 13 14 15 38
Node 27 [Pin Complex] wcaps 4194703: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=3, stepsize=39, mute=0
 Amp-In vals:  [0 0]
 Amp-Out caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-Out vals:  [128 128]
 Pincap 530238: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80
 Pin Default 1091637744: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 15, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 32: IN VREF_HIZ
 Unsolicited: tag=00, enabled=0
 Connection: 5
 12* 13 14 15 38
Node 28 [Pin Complex] wcaps 4194305: Stereo
 Pincap 2080: IN
 Pin Default 1496515056: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 15, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 0:
Node 29 [Pin Complex] wcaps 4194304: Mono
 Pincap 2080: IN
 Pin Default 1501757936: [N/A] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 15, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 0:
Node 30 [Pin Complex] wcaps 4195072: Mono Digital
 Pincap 2064: OUT
 Pin Default 21303584: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
DefAssociation = 2, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 0:
 Connection: 1
 6
Node 31 [Pin Complex] wcaps 4194816: Mono Digital
 Pincap 2080: IN
 Pin Default 1091637744: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 15, Sequence = 0
Misc = NO_PRESENCE
 Pin-ctls: 0:
Node 32 [Vendor Defined Widget] wcaps 15728704: Mono
 Processing caps: benign=0, ncoeff=17
Node 33 [Vendor Defined Widget] wcaps 15728640: Mono
Node 34 [Audio Mixer] wcaps 2097423: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-In vals:  [0 0] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128]
 Amp-Out caps: N/A
 Amp-Out vals:  [0 0]
 Connection: 11
 24 25 26 27 28 29 20 21 22 23 11
Node 35 [Audio Mixer] wcaps 2097423: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-In vals:  [0 0] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128] [128 128]
 Amp-Out caps: N/A
 Amp-Out vals:  [0 0]
 Connection: 11
 24 25 26 27 28 29 20 21 22 23 11
Node 36 [Vendor Defined Widget] wcaps 15728640: Mono
Node 37 [Audio Output] wcaps 17: Stereo
 Converter: stream=0, channel=0
 PCM:
rates [1376]: 44100 48000 96000 192000
bits [14]: 16 20 24
formats [1]: PCM
Node 38 [Audio Mixer] wcaps 2097423: Stereo Amp-In Amp-Out
 Amp-In caps: ofs=0, nsteps=0, stepsize=0, mute=1
 Amp-In vals:  [0 0] [0 0]
 Amp-Out caps: ofs=31, nsteps=31, stepsize=5, mute=0
 Amp-Out vals:  [0 0]
 Connection: 2

Then is my graph made with the help of KIng`s guide.

 

BTW I can get my card working with the patch made by cesar di.

POST HERE ON #71

The problem is cannot use the in/out mic displayed in sound preference.

No output displayed in the info from the apple.

HERE AT #77 U can see my upload photoes

 

Finally I am messed up.May be u can figur it out.

alc883.txt.svg.zip

Link to comment
Share on other sites
live.fx
live.fx
Posted
Posted

Ok. Another point of view.

 

1. I have this guide. I use it - step by step. (without PIN config)

 

2. After modification, i`m do reboot with AppleHDA.kext and HDAenabler.kext installed, and AppleAzaliaAudio.kext-removed.

 

3. I have no sound. But have some info from "dmesg" command, and i see AppleHDA.kext-loaded. AppleHDAController.kext-loaded, AppleHDAPlatformDriver.kext - loaded also.

 

4. After second reboot (without any modifications) i don`t see AppleHDAPlatformDriver.kext - it is not loaded...

~~~

 

What i can do next? How i can use this debug info from "dmesg" ?:

Sound assertion "0 != fAudioFunctionGroup->setExternalControlForDefaultDeviceTypeAndTag ( true, pinDefaultDeviceType (), getUnsolicitedTagForDeviceType () )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAPathSet.cpp" at line 82 goto Exit
Sound assertion "!pathSet->initPathSetFromXML ( pathSet_aArrayOfPathArrays, functionGroup )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAEngine.cpp" at line 601 goto Exit
Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAEngine.cpp" at line 6074 goto Exit
Sound assertion "0 != buildPathSets ( pathGroupArray )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAEngine.cpp" at line 178 goto Exit
Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 1699 goto Exit
Sound assertion "0 != createAudioEngines ( fPathMap_aDriverInstance )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 108 goto Exit
Sound assertion "!vRefArgumentIsSupported" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAWidget.cpp" at line 1435 goto Exit
Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAFunctionGroupExternalControl_VirtualGPO.cpp" at line 83 goto Exit
Sound assertion "0 != fAudioFunctionGroup->setExternalControlForDefaultDeviceTypeAndTag ( true, pinDefaultDeviceType (), getUnsolicitedTagForDeviceType () )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAPathSet.cpp" at line 82 goto Exit
Sound assertion "!pathSet->initPathSetFromXML ( pathSet_aArrayOfPathArrays, functionGroup )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAEngine.cpp" at line 601 goto Exit
Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAEngine.cpp" at line 6074 goto Exit
Sound assertion "0 != buildPathSets ( pathGroupArray )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDAEngine.cpp" at line 178 goto Exit
Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 1699 goto Exit
Sound assertion "0 != createAudioEngines ( fPathMap_aDriverInstance )" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDA/AppleHDADriver.cpp" at line 108 goto Exit

 

In "HOWTO" -

With this U can hopefully boot and have sound.

 

P.P.S: Change in Controler plist are crucial,but U can boot with your AppleHDA.kext with only this informations in HDAController plist file, but System profiler will not show your inputs.

 

But i`m not have any sounds from any out`s of soundcard. I need to rewrite Pin`s configurations for audio IN - OUT`s properly work, and for System Profiler controls?

 

AD1988. Someone get all outs worked for this card?

Link to comment
Share on other sites
kidalive
kidalive
Posted
Posted

converted pin data from VISTA register alc883 CAd1

does this help :hysterical:

01471c1f 01471d10 02471e21 01471f01 01571c10 01571d01 01571e13
01571f99 01671cf0 01671d11 01671e11 01671f41 01771cf0 01771d11
01771e11 01771f41 01871d98 01871c30 01871f01 01871ea1 01971d09
01971c3f 01971f99 01971ea3 01a71d11 01a71cf0 01a71f41 01a71e11
01b71d11 01b71cf0 01b71f41 01b71e11 01c71d01 017c1cf0 01c71f59
01c71e33 01d71d01 01d71cf0 01d71f59 01d71e83 01e71d11 01e71c20
01e71f01 01e71e45 01f71d11 01f71cf0 01f71f41 01f71e11

Link to comment
Share on other sites
cparm
cparm
Posted
Posted
Ok, so Almost got it, but the problem is that I only have output via the front headphone jack and it 5.1 surround is still grayed out under multichannel in Audio MIDI setup.... None of the jacks on the back put out any sound!

 

So Close!

 

so my applehda don't work for you ?

Link to comment
Share on other sites
litroncn
litroncn
Posted
Posted

Thanks, MadTux!, Nice Job.

 

Still no sound at all, I was able to find the pin numbers using HDAPatcher 1.20 and came up with this:

 

Back Mic: 9 34 24

Line In : 8 35 26

Speaker : 20 12 2

LineOut 1: 21 13 3

Headphone: 27 38 37

Spdif In : 10 31

Spdif Out: 30 6

 

I can't get osx to recognize the sound card (I'm using HDAEnabler.kext with AppleHDA.kext).

 

From about this mac, I get

 

Intel High Definition Audio:

 

Device ID: 0x1458A002

Audio ID: 12

Available Devices:

Speaker:

Connection: Unknown

 

i can't find the device thru the System Preferences.

i can't tell what's wrong with my Info.plist, i dump the audio codec under xubuntu 8.10.

when i load the kext, there is some erros as follows: sorry for my bad english.

 

HDAEnabler: Copyright © 2008 by Kabyl

HDAEnabler: 05/05/2008 Added SPAudio support:Taruga

HDAEnabler: Copyright © 2008 by Kabyl

HDAEnabler: 05/05/2008 Added SPAudio support:Taruga

Sound assertion "0 == fInterruptSource" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDAController/AppleHDAController.cpp" at line 215 goto Exit1

Sound assertion "0 == fInterruptSource" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDAController/AppleHDAController.cpp" at line 215 goto Exit1

AppleHDA.zip

alc888.txt

PinConfigOverrideVerbs.txt

flipedConfigData.txt

Link to comment
Share on other sites
kramer2k
kramer2k
Posted
Posted

You've got to change the first Zero (0) to a two (2), as your codec is Address 2

So change 01471C10 to 21471C10...for all of them

 

If you can, just go to the tutorial section, find the AppleHDA thread and download Cparm's kext at the end, then insert your pin config in the appropriate place (AppleHDAcontroller.kext info.plist file)

 

Good luck!

 

BTW, what mobo do you have?

Link to comment
Share on other sites
hooded_crow
hooded_crow
Posted
Posted

Greetings!

 

All right; I admit it. This stuff is beyond me. I can't figure it out. I just want to have sound play properly through my laptop and not just through the USB headphones I have.

 

I'm not sure if this is where I should post this request, but I'm willing to pay for someone to do this for me. I have neither the time nor the expertise. Please PM me to let me know what information you would need from me.

 

Please note: this is not meant to be an incendiary request. I just need a task done and I can't do it.

Moderator: if this post is inappropriate, illegal, immoral, or fattening please feel free to remove it.

 

Thank you!

 

hooded_crow

Link to comment
Share on other sites
  • 2 weeks later...
 Mysticus C*
 Mysticus C*
Posted
Posted

to anyone who has better understanding of those error messages?

 

I m getting the same message as litron

Sound assertion "0 == fInterruptSource" failed in "/SourceCache/AppleHDA/AppleHDA-157.1.24/AppleHDAController/AppleHDAController.cpp" at line 215 goto Exit1

 

configdata i made from linux dump, also double checked with vista, they are exactly the same!

============================

01171cf0 01171d11 01171e11 01171f41

01271cf0 01271d11 01271e11 01271f41

01371cf0 01371d11 01371e11 01371f41

01471c10 01471d01 01471e13 01471f99

01571cf0 01571d11 01571e11 01571f41

01671cf0 01671d11 01671e11 01671f41

01771cf0 01771d11 01771e11 01771f41

01871c20 01871d98 01871ea1 01871f01

01971c2f 01971d09 01971ea3 01971f99

01a71cf0 01a71d11 01a71e11 01a71f41

01b71cf0 01b71d11 01b71e11 01b71f41

01d71c0d 01d71d8e 01d71e16 01d71f40

01e71cf0 01e71d11 01e71e11 01e71f41

02171c1f 02171d40 02171e21 02171f01

============================

dev ======> I/O-Mixer-PinComplex

buil-in mic==> 8--------35-------25

ext mic====> 9--------34-------24

intr spk====> 2--------12-------20

HP out====> 2--------12-------33? (can be 3-13-33 but codec dump points to this)

============================

this is a 027210ec (dec=283902578) realtek audio- 27d88086 intel bus, also system profiler showing some funny id, 144dca00 (intel hi def)

 

i added pciprimarymatch to controller (with 27d88086) as well otherwise driver doesnt even bother trying to load...

 

i edited applehda binary for 026210ec (tried 088510ec as well) to 027210ec

 

same results...

 

see the attachments for better details... i may be overlooking something i dunno, someone confirm everything as it should be?

 

you will see that the codec is at address "0" but same error message... i dont think it is related directly to address (bcoz it says interrupt IRQ related but i may be wrong...

 

any idea thanx?

controller.txt

platform.txt

alc272.txt

alc272_hex2dec.txt

Link to comment
Share on other sites
mallard1983
mallard1983
Posted
Posted

I have got sound coming out of my headphone jack now thanks to this, but I am still having problems getting everything right. I was wondering if someone could help me figure out what I am doing wrong. I will include the linux dump, and a copy of the Vista Reg that you said to use. Also I am including a copy of the current state of the applehda.kext file if it helps. Hopefully someone can help me figure this out?

AppleHDA.kext.zip

pinconfig.txt

VistaRegEdit.rtf

Link to comment
Share on other sites
Wiwi
Wiwi
Posted
Posted

Hi all !!!

 

I'm back with some issues... :)

 

I try to make a new ACL660/ACL660vd kext from the 1.5.7 Apple kext (instead of current 1.2.9/1.3.3).

 

After a lot of efforts, i've succeed in make it shutdown, but i don't understand new pathmaps method...

 

If someone with some minutes can help, here are all the files...

 

Pb:No headphone, no mic and it seems int mic are inversed (names too)...

PinConfig comes from a linux codec dump, HDAbin is patched, layouts are the only problem...

ACL660_660vd_1.5.7.zip

Link to comment
Share on other sites
  • 2 weeks later...
eberts
eberts
Posted
Posted

Hi,

I'm afraid this doesn't work anymore for the latest 1.6.2a37 kext? I tried several times, compared with the previous one - kexts get loaded but no audio devices :( So we have to stick to the 10.5.5 driver until someone figures out what's different again in 10.5.6.

Thx

eberts

Link to comment
Share on other sites
enb14
enb14
Posted
Posted
maybe with this one, i think lin-in and mic-in shoulc work now

 

hey cparm have you tryied using 10.5.6 kexts yet?

 

I hex edited AppleHDA.kext/Contents/MacOS/AppleHDA and replaced ALC 262 for ALC 888, added the pinconfig strings in Controler.plist and then I haven't edited the PlatformDriver.plist because I have no clue how to do it or if is always needed even if I have HDAEnabler, by the way what's the use for HDAEnabler? is still needed?

 

Now I don't even have the speaker icon at the top bar, so my question is what should I be doing wrong?

Link to comment
Share on other sites
sweetsteal
sweetsteal
Posted
Posted

Hey all, first let me say i am a complete noob!

 

Next let me say how much I appreciate all the work everyone has done Especially Madtux, all the hours of work don't go unnoticed!

 

I have the Acer Aspire One with the alc 268 chipset. I have tried all the previous kext. I currently have sound with switching etc and am very grateful for it (using macsticks kext). However, the internal mic shows no volume control and it is so low that it does not capture any audio! I have tried other kexts that are supposed to have fixed this issue but to no avail. :-(

 

I have attached a copy of my codec dump, I am really hoping someone can help me finish the final details!!!

 

Thank you!

 

 

 

Sorry forgot the Dump !!!

 

Thanks again!

 

OK I have made a lot of progress but I can't seem to tackle a problem I have with the alc268 microphone, and i was hoping you could help me out! I have the Acer Aspire One, with the ALC268 chipset I have read your tutorial and done all the steps and I have SOUND working!!! I even managed to get the Mic to show up, Unfortunatly I cannot get the mic to show a volume control!! also the mic volume is EXTREMLY low to the point that it is barely even listenable!!,

 

I will do anything to get this working!

 

Attached is a linux dump and current applehda.kext

 

PLEASE PLEASE help me out!!!!

 

thanks,

 

Sweetsteal

AAO_Dump.txt

AppleHDA.kext.zip

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...