Jump to content

iDeneb v1 10.5.4

Jack Layne

By Jack Layne,
in New Releases and Updates

 Share
329 posts in this topic

Recommended Posts

Guest cavallo
Guest cavallo
Posted
Posted

It is not correct to ask first, first try as i have done a lot of times.

There are missing files, corrupted archives and many more anywhere in this planet also in original ones.

please undrestand that a distribution cannot be tested previously on every system.

This is the first 10.5.4 that goes on everyone of mines.

first, as my experience follow please those simple steps

1) enter bios and verify that apic or acpi is enabled;

2) if you have in it verify if s3 mode of acpi / apic is enebled;

3) disable any graphic, ram and cpu over or downclock;

4) disable usb legacy and/or usb mouse and keyboard support:

5) mps table must be 1.1 not 1.4 (if you have it)

6) disable firewire serial i.r and parallel port on board, to do that the best is to load optimized ones and then modify.

For amd owners the best is, once in installation customizings select 9.2.0 kernel, all fixes as 667 sm biosm, acpi fix, remove firewire, usb fix, cpus =1 and ps key and mouse fix.

Then your drivers, please use motherboard manual to know everything about chipset, audio, lan, wireless and if if you have have it video on board.

Select your graphic device.

to do it fasted don't select applications, tou can istall them with pacifist later.

On my Toshiba (intel) i did not modified nothing in bios.

i selected all fixes and as it is above.

don't pretend with any distribution to installing it successful on first time.

Link to comment
Share on other sites
aneks
aneks
Posted
Posted

Hi, I've downloaded and tried to install this version but as soon as i boot it it comes up with a box and says i have to restart my system in like 3-4 different languages and when i do the same thing happens. Anyone had a similar problem? Thanks.

Link to comment
Share on other sites
germi
germi
Posted
Posted

I installed iDeneb on my PC. It works very well. Thanks for the great release.

The only Problem i have is my ethernetconnection.

My onboard-ethernet does'nt work. It's the same as my kalywayinstallation.

With my Realtek-ethernetcard i get connection. But it breaks down after 20 minutes or so.

The Realtek works under kalyway very well.

I have taken a lot of options at the installation. With and without ethenet-kext's. I installed the Realtek R1000 Kext

and many options more. The result is always the same.

Has anyone an idea how i get my ethernet work?

Link to comment
Share on other sites
acidron
acidron
Posted
Posted

I've installed iDeneb with Vanilla kernel, installation passed just ok but system halts in booting.Screenshot is attached. Any solutions?

 

I tried Kalyway 10.5.2 (vanilla too) on the same system, and all was fine.

 

 

 

Hardware is:

 

Core2Duo 6400

 

MB Asus p5k-e wifi (based on intel p35)

 

8800gtx with efi strings

 

HDD SATA on ICH9

 

 

 

Options choosed are ICHx and JMicron.

 

 

 

I tried to change SATA setup in BIOS to AHCI and IDE, the same result

post-184954-1221672015_thumb.jpg

Link to comment
Share on other sites
  • 1 month later...
gnuga
gnuga
Posted
Posted

Sorry for bringing an old thread to the front page, and yes i'm still using ideneb v1 10.5.4 coz downloading v1.3 10.5.5 would overkill my bandwith (i need to wait next month to do that)

Then again, i see no major harm to my hardware if i'm using v1 10.5.4

 

my specs :

Biostar tp43d2-a7 (P43 , ICH10)

e2160 @ 3.1GHz

2 GB ram 2x1gb AData Vitesta 800

250GB IDE seagate

320GB SATA2 WDC

1x DVDrom Pioneer

9600GSO

 

install went smooth, using either SATA / IDE harddrive. but the problem came when rebooting after finish install the system:

 

MAC Framework successfully initialized

using 10485 buffer headers and 4096 cluster IO buffer headers

 

hmm... i've tried disabling AHCI , installing only from IDE , trying each kernel available, including vanila, ICHx and Jmicron fix, but it still there .. :rolleyes:

 

if anyone familiar with such error and found a fix pls pot the result here... thnx! :unsure:

Link to comment
Share on other sites
  • 1 month later...
asimovrobot
asimovrobot
Posted
Posted

Justin wanted to drop a note to say that iDeneb v1.3 10.5.5 worked well with Asus a8nsli mobo.

 

 

Onboard LAN was the only thing missing.

 

Found this thread http://forum.insanelymac.com/index.php?showtopic=125569 using the latest version (0.62.7)

 

I simply ran OSX86Tools - Install Kexts - select 0.62.7 kext(i burned it to cd using a different computer) - restart and voila!!

 

Beautiful.

 

 

 

So I currently have OSX running on a SATA drive, installed from a SATA dvd burner with an old Nvidia 7600GT(QE and CI both seem to be running). On board AC850 audio working also.

 

This was much easier than a previous install of JAS(sorry dont remember the version) LAN worked with that one straight away but getting QE/CI to work was quite the excercise.

 

Anyways, thanks much

Link to comment
Share on other sites
  • 4 weeks later...
budda963
budda963
Posted
Posted

Anybody want to help a Noob? Ive tried to include as much info as possible

 

mother board: Gateway / eMachines MCP61PM2-MA Motherboard 4006200R

CPU: AMD Sempron™ (Socket AM2) processor 3600+

(2.0GHz | 256KB L2 Cache | 1600MHz FSB)

Chipset: NVIDIA® GeForce® 6150SE chipset

Memory: 2GB DDR2 memory, dual-channel capable

2 DDR2 slots (Total)

Hard Drive: 120GB SATA II (7200rpm, 2MB cache) 1

Optical Drives: 16x DVD±R/RW Supermulti Drive

Video: NVIDIA® GeForce® 6150SE integrated graphics

Up to 128MB shared video memory

PCI-Express® (PCI-E x16) slot available for upgrade

Sound: Six-channel (5.1) high-definition audio

Communications: 56K ITU v.92-ready Fax/Modem (RJ-11 port)

Intel® 10/100Mbps Ethernet LAN (RJ-45 port)

Peripherals: Standard multifunction keyboard

2-button wheel mouse (PS/2)

Ports/Other: 6 - USB 2.0 ports (2 front, 4 rear)

1 - VGA

1 - Parallel port

1 - Serial port

2 - PS/2 ports (keyboard and mouse)

3 - Audio (Rear): Line-in/Side (Stereo), Front/Headphone (Stereo), Microphone

2 - Audio (Front): Microphone, Front/Headphone (Stereo)

1 - RJ-45 Ethernet port

1 - RJ-11 Modem port

 

ideneb 10.5.5 v 1.3

Error Parsing plist file loading

when i try to boot from the dvd thats the message that i get

Link to comment
Share on other sites
  • 2 months later...
Simon Zhou
Simon Zhou
Posted
Posted
update : everything works except audio volume slider. Other that that Perfect.

 

HUGE THANKS goes to q64ceo for helping me out every step

 

ThankS!

 

Hi, Gnuga, I have the same mobo, I tried several times with different kernel options, booting with different flags, but kept stuck at the gray apple screen, at one time I saw the turning wheel, but it never got beyond that.

 

Can you tell me how you got yours to work?

 

TP43D2-A7, ATI 3850, 4GB, E7200

Link to comment
Share on other sites
  • 2 months later...
Guest prairiedogg
Guest prairiedogg
Posted
Posted
Thanks Punk92!,

 

I'll try this release:) I've had problems with the ide microdrive (asus p5k-se) and it kept saying 'waiting for root device' while I had connected 1IDE HDD, one sata HDD and a usb HDD so I hope this will work. On my other pc iatkos v4i starts to install but just stops at +- 85%. Could someone send me an demonoid invite or post it to usenet? I don't have an account there yet.

 

Tim Leferink

 

 

I've had same problem, my motherboard is the same as yours. Iatkos 5i gets to 30%. and IDeneb says the same as your pc. Did you get a solution to this?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...