Complete Updates for Newbies and All -- Currently 10.5.5 Combo (Only Intel CPUs)

[ Mysticus C*]

22hertz:

vanilla kernel is vanilla kernel. fix is an additional driver for kernel to be able to HALT (STOP) the system completely! Vanilla kernel on some systems has restart/shutdown initiation stuck problem. The fix is running an addititional driver nothing else. and vanilla is untouched kernel still!

 

Your perception of vanilla is a bit off. NOONE is able to run their system completely UNTOUCHED apart from ORIGINAL MACs!

 

Lost Devil:

I would suggest you to use NVdarwin instead of efi strings. Maybe it can fix your problem with the resolution?

Also i m not sure you still have USB mount issue? because it is odd to have it now as i always add correct system.kext version along with kernels which is the fix for the problem (can you check the system.kext/ info.plist to see what version it is? may be i included wrong version?)

 

for video fix (suggestion):

open terminal.app

sudo su

enter your pass

cd /Library/Preferences/SystemConfiguration/

rm -R com.apple.Boot.plist

mv com.apple.Boot.plist.orig com.apple.Boot.plist

 

now, run the post combo update only

choose:

 

kernel: 9.5.0 voodoo beta 2c (if you are not afraid to make test using the brick free guide, try vanilla kernel)

video: nvidia/NVdarwin/Step1+Step2 = choose 256mb option only)

(System Func: uncheck (remove the selection in) the acpi option if you have choosen the vanilla kernel in test)

 

For referencing in chinese forums, go ahead my friend. I can even offer you my help here for your forum if you provide good structured description (as explained in post#1 here)

 

KellyKelly:

your mouse problem is a well known issue in nforce mobos with nvidia gfx cards. I had nforce mobo+ati gfx card in past but i never had the issue --> indicating that the problem is related to nforce chipset+nvidia gfx

 

you can get further help in verdant's topics for nforce for the issues you have.

 

As suggestions,

 

+ learn to use the brick free guide in Post#1...

+ to test for a more stable system: choose followings in post update (no need to do full update again only post combo patch)

(do the tests on a test partition using brick free guide)

kernel: voodoo beta 2c (which you already did)

chipset: NForceATA by slashack mods/NforceATA (normal one, not the debug one)

network: is still work on progress on nforce chipsets, but you can give it a go for nForceLan by eno... (one a test partition)

 

Good Luck Everyone...

 

Cheers...

[verdant]

@ Lost Devil

 

About

 

1. I am use 8600GT 256m ONDA video card, after I change resolution from 800X600 at 85HZ to 1024X768 at 85HZ, my CRT monitor become blue screen after restart, then I wait monitor sleep, after wake up, display will become normal and fine, I think this is the only way I can using it, still can't find another way;

 

you could, after following Mysticus C* suggestion, also try swapping the monitor DVI or VGA (via VGA-to-DVI adapter) connector to the other DVI port (or to the DVI port from the VGA port?) on the GFX card.....this gave me on-the-fly switchable resolutions on my 8600GT 256 GFX card.......

[KellyKelly]

KellyKelly:

your mouse problem is a well known issue in nforce mobos with nvidia gfx cards. I had nforce mobo+ati gfx card in past but i never had the issue --> indicating that the problem is related to nforce chipset+nvidia gfx

 

you can get further help in verdant's topics for nforce for the issues you have.

 

As suggestions,

 

+ learn to use the brick free guide in Post#1...

+ to test for a more stable system: choose followings in post update (no need to do full update again only post combo patch)

(do the tests on a test partition using brick free guide)

kernel: voodoo beta 2c (which you already did)

chipset: NForceATA by slashack mods/NforceATA (normal one, not the debug one)

network: is still work on progress on nforce chipsets, but you can give it a go for nForceLan by eno... (one a test partition)

 

Good Luck Everyone...

 

Cheers...

 

Thanks for taking time replying to my post =]

 

I did not have this problem with 10.5.4. At that time I was using Nvinject 0.2.2.

 

After I upgraded to 10.5.5 I used NVdarwin 1.2.4.

 

Yup the nForceATA I choosed the normal one.

for network I'm using D-Link DFE-530TX+ RTL8139 set to half duplex and work out of the box.

 

The only issue I have is Uhhh the mouse lol

 

mind if you please give me the link to verdents topic?

 

Thanks and I appreciate for your help.

 

Kelly

[verdant]

@ Kelly Kelly Here is the link......

[ws2000]

First thanks for all the work Mysticus ! Its appreciated.

 

I upgraded my Dell E520 (Dual Core Intel Core 2 Duo E4300, 1800 MHz) from Kalyway 10.5.2 and it appears to have gone fine. I had to fix the sound but that is no problem.

 

One question....in the "about this MAC" it reports my machine to be 4.30 GHZ Intel Core 2 Duo and the memory is correct. I would expect to see 1.8 GHZ Intel Core 2 Duo Processor ???

 

When I check the activity monitor it does show 2 CPU and all things again appear to be fine.

[horsetrader]

Great tool! Thanks so much for your time in creating and posting. I was able to get a kalway fresh instal of 10.5.2. up to 10.5.3 with the Kalway update tool, and then used your mods to get to 10.5.5 ! bravo- also I noticed if something was incorrect in the 'post instal' dialog after reboot I could run again (from inside the 10.5.5) and fix a couple of issues (mostly kernel change getting my network to work)

 

specs asus IP35-V, 6gb RAM, 7200gs, core2duo 2.8

[ Mysticus C*]

First thanks for all the work Mysticus ! Its appreciated.

 

I upgraded my Dell E520 (Dual Core Intel Core 2 Duo E4300, 1800 MHz) from Kalyway 10.5.2 and it appears to have gone fine. I had to fix the sound but that is no problem.

 

One question....in the "about this MAC" it reports my machine to be 4.30 GHZ Intel Core 2 Duo and the memory is correct. I would expect to see 1.8 GHZ Intel Core 2 Duo Processor ???

 

When I check the activity monitor it does show 2 CPU and all things again appear to be fine.

 

the issue maybe due to smbios selection? or some OC? i dunno really... good luck...

 

horsetrader: good luck and enjoy...

[ws2000]

Mysticus C*

 

Thanks! You were correct. I ran the Post Combo Update Patches again just selecting Mac Pro in smbios and restarted. :censored2:

 

the issue maybe due to smbios selection? or some OC? i dunno really... good luck...

 

horsetrader: good luck and enjoy...

[ Mysticus C*]

Mysticus C*

 

Thanks! You were correct. I ran the Post Combo Update Patches again just selecting Mac Pro in smbios and restarted.

 

glad it worked, good luck and cheers...

[22HERTZ]

22hertz:

vanilla kernel is vanilla kernel. fix is an additional driver for kernel to be able to HALT (STOP) the system completely! Vanilla kernel on some systems has restart/shutdown initiation stuck problem. The fix is running an addititional driver nothing else. and vanilla is untouched kernel still!

 

Your perception of vanilla is a bit off. NOONE is able to run their system completely UNTOUCHED apart from ORIGINAL MACs!

 

I understand no one can run a completely vanilla install, but some of us can run a completely vanilla kernel, and that is what I would rather do except there is no option for that kernel or a "just keep what you have" option. Does that make sense? I dont know if Im not explaining this well or is there something I dont understand?

I only require two kexts for a stable system and dont want to add anything else I dont have to have to run stable.

 

 

By the way kernel 9.5.1 appears to be running perfectly...Its been up for a couple days with no problems

[ Mysticus C*]

I understand no one can run a completely vanilla install, but some of us can run a completely vanilla kernel, and that is what I would rather do except there is no option for that kernel or a "just keep what you have" option. Does that make sense? I dont know if Im not explaining this well or is there something I dont understand?

I only require two kexts for a stable system and dont want to add anything else I dont have to have to run stable.

 

 

By the way kernel 9.5.1 appears to be running perfectly...Its been up for a couple days with no problems

 

well, the installer is not made to satisfy specific people in mind.

 

9.5.0 kernel with fix: it is 100% vannilla kernel! + it adds another driver==>(driver is not adding any patch to kernel, it is a seperate file, rather brings back functionality) to fix shutdow/restart issues! if you dont like an additional drivers/custom packages, why are you here?

 

original combo update will satisfy you 100% already, all you need is to run a terminal script once to remove acpicpupm, and run another termial command afterwards to change "1" script to read dsmos... and everything in your system will be VANILLA...

 

THERE IS AN OPTION TO KEEP VANILLA, you just dont understand, just dont choose anything in the kernel section, you will get vanilla, if you wanna use my patches, but do not want anytg custom

 

run pre patch, which disables intelcpupowermanagement (as you would do from terminal, this is auto process)

run original combo update

run post patch nothing selected (dsmos will be selected to change "1" script, if it finds it) and you will have full vanilla system with no custom packages...

 

i m saying again if you still dont understand, this topic is not for you...

"well, the installer is not made to satisfy specific people in mind." well in this case it can actually satisfy your needs, you just dont understand how to use it.

[22HERTZ]

Thanks, I'll give that a try

[Freddie2008]

Hi, Just join right now, and I'm interested to know learn, and test this method. but unfortunately I cannot find the link that says small emoticon with a trumpet here. please teach me the link for the download. Thanks

[22HERTZ]

Hi, Just join right now, and I'm interested to know learn, and test this method. but unfortunately I cannot find the link that says small emoticon with a trumpet here. please teach me the link for the download. Thanks

Type "bike town mysticus" in Google. It is the first link

[Freddie2008]

HI, where did you see the links?

Thanks

 

Thanks for your help, I'm looking for the download link of the 10.5.3 Combo Update Package v1.4b to run 10.5.4 in my PC

[ Mysticus C*]

HI, where did you see the links?

Thanks

 

Thanks for your help, I'm looking for the download link of the 10.5.3 Combo Update Package v1.4b to run 10.5.4 in my PC

 

 

check the first post...

 

read everything there, and scroll down to find BIKE TOWN link, no need to google anything... in bike town, go to update section... that is it.

 

22hertz: good luck with your vanilla obsession... but expect the yellow hdd icons, unknown ahci controller names etc...

[alvin777]

I've solved the problem (I'm on Kalyway, vanilla kernel). The Airport Extreme Update 2008-004 may be causing. But if you need this update, it might be better to just download another osx86 installer that is already a 10.5.5. Gbu.

 

Hi. Thanks for this. I've installed it's vanilla kernel, the latest (not the one with the shutdown fix), ich jmicron for Gigabyte DS3, nvidia inject. But has anybody solved the Time Machine error: The Backup Volume Could not be found"

 

Thanks in advance. I've tried formatting my backup but that didn't work. Now I need to backup everything up more than ever. I hope there's a fix to it (hopefully a simple one:). Gbu.

[thewritten]

Great Post!

 

I've been holing off the update for serveral reasons (mainly procrastination) but I'm glad I did asince I found such an extensive and user friendly tutorial. Everything seems to be working pretty smoothly except for one little thing. I have to unplug/plug the ethernet cable after boot once in order to get the LAN working. I've found other users that had pretty much the exact same problem but none of them were solved or apply in my case. I've followed the entire post to the tee.

 

http://forum.insanelymac.com/index.php?showtopic=101460

http://forum.insanelymac.com/index.php?sho...9436&st=360

 

The motherboard I'm using is a P5LD2-VM. The network adaptor is "Intel Gb LAN" (taken from newegg).

 

Further Relevant Specs:

 

Kalyway 10.5.2 -> Kalyway Combo udpate 10.5.3 -> Dont remember how I got to 10.4.4 -> This threads tutorial 10.5.5

CPU: Intel Pentium-D 820 @ 2.8 GHZ

RAM: Corsair 1GB x 2 DDR2 667 MHZ Value RAM

GPU: Asus Nvidia Geforce 8600 GT Silent Edition w/ 256MB (NVinject)

HDD: PATA 160 GB, One partition all dedicated to OS X.

 

Everything else I just chose to restore from the original 10.5.4 state (where everything was working 100%)

 

My BIOS is setup exactly the same as user Diabolik, which could be found here:

http://forum.insanelymac.com/index.php?showtopic=41685

 

The sleep is working, and thankfully, I don't have to do the plug/replug thing after wake so it's not that much of a problem but I just can't get over this feeling that I'm looking over something really simple. Everything is too close to perfection where not asking just wasn't an option. =) Thanks for your time.

[detlevq]

Hi Mysticus,

 

Installed the Combo Update 10.5.5 on my Kalway 10.5.2 as instructed and it's working fine. Only thing not working is the Time Machine. Read a lot of posts on how to fix this problem and even tried a few of them but I have to say that a lot of the instructions are a bit over my head.

 

I had previously had problems with Front Row and installed the latest drivers from this website for my ATI Radion HD3650 graphics card and that sorted the problem as well as improving the screen resolution no end.

 

My computer system is as follows:

 

Operating Software: Windows XP Pro X64 : OS X 10.5.5

 

Processor

Model : Intel® Core2 Duo CPU E8400 @ 3.00GHz

Speed : 3GHz

Cores per Processor : 2 Unit(s)

Threads per Core : 1 Unit(s)

Type : Dual-Core

Internal Data Cache : 2x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size

L2 On-board Cache : 6MB, ECC, Synchronous, ATC, 24-way, 64 byte line size, 2 threads sharing

 

System

System : Gigabyte Technology Co., Ltd. EX38-DS5

Mainboard : Gigabyte Technology Co., Ltd. EX38-DS5

Bus(es) : PCI PCIe IMB USB i2c/SMBus

Multi-Processor (MP) Support : No

Multi-Processor Advanced PIC (APIC) : Yes

System BIOS : Award Software International, Inc. F2

Total Memory : 4GB DDR2

 

Chipset

Model : Giga-Byte X38/X48 Processor to I/O Controller

Front Side Bus Speed : 4x 333MHz (1.33GHz)

Total Memory : 4GB DDR2

Memory Bus Speed : 2x 400MHz (800MHz)

 

Video System

Adapter : ATI Radeon HD 3600 Series (2GB, PCIe 2.00 x16, PS 3.0, VS 3.0)

 

Physical Storage Devices

ST3500320AS 500GB (SATA300, NCQ) : 466GB (C:) (D:)

ST3500320AS 500GB (SATA150, NCQ) : 466GB (L:) (O:)

Generic STORAGE DEVICE (USB) : N/A (H:)

Generic STORAGE DEVICE (USB) : N/A (I:)

Generic STORAGE DEVICE (USB) : N/A (J:)

Generic STORAGE DEVICE (USB) : N/A (K:)

USB-HS Maxtor 6Y160L0 164GB (USB) : 153GB

IOMEGA ZIP 250 (USB) : N/A (G:)

HL-DT-STDVD-ROM GDR-H30N (SCSI, DVD+-R, CD-R) : N/A (E:)

TSSTcorp CDDVDW SH-S203P (SATA150, DVD+-RW, CD-RW, 2MB Cache) : N/A (F:)

 

Logical Storage Devices

XP Pro X64 Main (C:) : 234GB (NTFS) @ ST3500320AS 500GB (SATA300, NCQ)

XP Pro X64 Spare (D:) : 195GB (NTFS) @ ST3500320AS 500GB (SATA300, NCQ)

Mac OS X (M:) : 250GB (HFS Journalled) @ ST3500320AS 500GB (SATA150, NCQ)

Time Machine (N:) : 150GB (HFS Journalled) @ ST3500320AS 500GB (SATA150, NCQ)

Spare NFTS (L:) : 49GB (NTFS) @ ST3500320AS 500GB (SATA150, NCQ)

Shared (O:) : 17GB (FAT32) @ ST3500320AS 500GB (SATA150, NCQ)

CD-ROM/DVD (E:) : N/A @ HL-DT-STDVD-ROM GDR-H30N (SCSI, DVD+-R, CD-R)

CD-ROM/DVD (F:) : N/A @ TSSTcorp CDDVDW SH-S203P (SATA150, DVD+-RW, CD-RW, 2MB Cache)

3.5" 1.44MB (A:) : N/A

Removable Drive (H:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (I:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (J:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (K:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (G:) : N/A @ IOMEGA ZIP 250 (USB)

 

Peripherals

LPC Hub Controller 1 : Giga-Byte (ICH9) LPC Interface Controller

LPC Hub Controller 2 : Giga-Byte (ICH9) SMBus Controller

Audio Device : Giga-Byte (ICH9) HD Audio Controller

Audio Device : Giga-Byte ??? (AA20)

Audio Codec : AMD (ATI) ??? (AA01)

USB Controller 1 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 2 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 3 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 4 : Giga-Byte (ICH9) USB2 Enhanced Host Controller

USB Controller 5 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 6 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 7 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 8 : Giga-Byte (ICH9) USB2 Enhanced Host Controller

System SMBus Controller 1 : Intel 801xx/63xx SMBus

 

Printers and Faxes

Printer : SnagIt 9 Printer (600x600, Colour)

Printer : doPDF 6 Printer Driver (2400x2400, Colour)

Printer : Microsoft XPS Document Writer (600x600, Colour)

Printer : Canon MP970 series Printer (USB, Colour)

 

Network Services

Network Adapter : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC - Packet Scheduler Miniport (Ethernet, 100Mbps)

 

Power Management

Mains (AC) Line Status : On-Line

 

Operating System(s)

Windows System : Microsoft Windows XP (2003) Professional 5.02.3790 (Service Pack 2)

Platform Compliance : x64

[alvin777]

Hi. I reinstalled everything, installed Mysticus' stuff after which I software updated everything but left the Airport Extreme 2008-004 update (which seems to be the culprit for TM not working) unchecked. I'm careful now not to check that update whenever I use software update.

 

Hi Mysticus,

 

Installed the Combo Update 10.5.5 on my Kalway 10.5.2 as instructed and it's working fine. Only thing not working is the Time Machine. Read a lot of posts on how to fix this problem and even tried a few of them but I have to say that a lot of the instructions are a bit over my head.

 

I had previously had problems with Front Row and installed the latest drivers from this website for my ATI Radion HD3650 graphics card and that sorted the problem as well as improving the screen resolution no end.

 

My computer system is as follows:

 

Operating Software: Windows XP Pro X64 : OS X 10.5.5

 

Processor

Model : Intel® Core2 Duo CPU E8400 @ 3.00GHz

Speed : 3GHz

Cores per Processor : 2 Unit(s)

Threads per Core : 1 Unit(s)

Type : Dual-Core

Internal Data Cache : 2x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size

L2 On-board Cache : 6MB, ECC, Synchronous, ATC, 24-way, 64 byte line size, 2 threads sharing

 

System

System : Gigabyte Technology Co., Ltd. EX38-DS5

Mainboard : Gigabyte Technology Co., Ltd. EX38-DS5

Bus(es) : PCI PCIe IMB USB i2c/SMBus

Multi-Processor (MP) Support : No

Multi-Processor Advanced PIC (APIC) : Yes

System BIOS : Award Software International, Inc. F2

Total Memory : 4GB DDR2

 

Chipset

Model : Giga-Byte X38/X48 Processor to I/O Controller

Front Side Bus Speed : 4x 333MHz (1.33GHz)

Total Memory : 4GB DDR2

Memory Bus Speed : 2x 400MHz (800MHz)

 

Video System

Adapter : ATI Radeon HD 3600 Series (2GB, PCIe 2.00 x16, PS 3.0, VS 3.0)

 

Physical Storage Devices

ST3500320AS 500GB (SATA300, NCQ) : 466GB (C:) (D:)

ST3500320AS 500GB (SATA150, NCQ) : 466GB (L:) (O:)

Generic STORAGE DEVICE (USB) : N/A (H:)

Generic STORAGE DEVICE (USB) : N/A (I:)

Generic STORAGE DEVICE (USB) : N/A (J:)

Generic STORAGE DEVICE (USB) : N/A (K:)

USB-HS Maxtor 6Y160L0 164GB (USB) : 153GB

IOMEGA ZIP 250 (USB) : N/A (G:)

HL-DT-STDVD-ROM GDR-H30N (SCSI, DVD+-R, CD-R) : N/A (E:)

TSSTcorp CDDVDW SH-S203P (SATA150, DVD+-RW, CD-RW, 2MB Cache) : N/A (F:)

 

Logical Storage Devices

XP Pro X64 Main (C:) : 234GB (NTFS) @ ST3500320AS 500GB (SATA300, NCQ)

XP Pro X64 Spare (D:) : 195GB (NTFS) @ ST3500320AS 500GB (SATA300, NCQ)

Mac OS X (M:) : 250GB (HFS Journalled) @ ST3500320AS 500GB (SATA150, NCQ)

Time Machine (N:) : 150GB (HFS Journalled) @ ST3500320AS 500GB (SATA150, NCQ)

Spare NFTS (L:) : 49GB (NTFS) @ ST3500320AS 500GB (SATA150, NCQ)

Shared (O:) : 17GB (FAT32) @ ST3500320AS 500GB (SATA150, NCQ)

CD-ROM/DVD (E:) : N/A @ HL-DT-STDVD-ROM GDR-H30N (SCSI, DVD+-R, CD-R)

CD-ROM/DVD (F:) : N/A @ TSSTcorp CDDVDW SH-S203P (SATA150, DVD+-RW, CD-RW, 2MB Cache)

3.5" 1.44MB (A:) : N/A

Removable Drive (H:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (I:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (J:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (K:) : N/A @ Generic STORAGE DEVICE (USB)

Removable Drive (G:) : N/A @ IOMEGA ZIP 250 (USB)

 

Peripherals

LPC Hub Controller 1 : Giga-Byte (ICH9) LPC Interface Controller

LPC Hub Controller 2 : Giga-Byte (ICH9) SMBus Controller

Audio Device : Giga-Byte (ICH9) HD Audio Controller

Audio Device : Giga-Byte ??? (AA20)

Audio Codec : AMD (ATI) ??? (AA01)

USB Controller 1 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 2 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 3 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 4 : Giga-Byte (ICH9) USB2 Enhanced Host Controller

USB Controller 5 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 6 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 7 : Giga-Byte (ICH9) USB Universal Host Controller

USB Controller 8 : Giga-Byte (ICH9) USB2 Enhanced Host Controller

System SMBus Controller 1 : Intel 801xx/63xx SMBus

 

Printers and Faxes

Printer : SnagIt 9 Printer (600x600, Colour)

Printer : doPDF 6 Printer Driver (2400x2400, Colour)

Printer : Microsoft XPS Document Writer (600x600, Colour)

Printer : Canon MP970 series Printer (USB, Colour)

 

Network Services

Network Adapter : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC - Packet Scheduler Miniport (Ethernet, 100Mbps)

 

Power Management

Mains (AC) Line Status : On-Line

 

Operating System(s)

Windows System : Microsoft Windows XP (2003) Professional 5.02.3790 (Service Pack 2)

Platform Compliance : x64

[ktfn]

Damn, just done the whole routine: pre-update, update, post-update with customization, but i f**ked up a little - a have chosen the vanilla kernel (that's ok it works on my machine), but didn't turn off the "ACPI-APIC" stuff and it stayed in the "AppleACPI - AppleAPIC (Old) for Bad Bios" position. I have noticed it before i rebooted, so i didn't reboot ... and here i am :-)

 

Help :-)

[ Mysticus C*]

Damn, just done the whole routine: pre-update, update, post-update with customization, but i f**ked up a little - a have chosen the vanilla kernel (that's ok it works on my machine), but didn't turn off the "ACPI-APIC" stuff and it stayed in the "AppleACPI - AppleAPIC (Old) for Bad Bios" position. I have noticed it before i rebooted, so i didn't reboot ... and here i am :-)

 

Help :-)

 

 

explain clearly,

 

what is working? what is not working? or what is your problem related to the question...

[ktfn]

I didn't restart yet :-) but i think that something will happen - the "AppleACPI - AppleAPIC (Old) for Bad Bios" option was left turned on with the vanilla kernel, which didn't suppose to happen... at least the guide in the first post says so

 

I think i need vanilla versions of the following files:

 

AppleACPIPlatform.kext

AppleAPIC.kext

[ Mysticus C*]

I didn't restart yet :-) but i think that something will happen - the "AppleACPI - AppleAPIC (Old) for Bad Bios" option was left turned on with the vanilla kernel, which didn't suppose to happen... at least the guide in the first post says so

 

I think i need vanilla versions of the following files:

 

AppleACPIPlatform.kext

AppleAPIC.kext

 

select vanilla 9.5.0 kernel it installs acpi and apic already with it, that is why i said to unselect the acpi-apic options from system functions menu, if you choose the vanilla kernel...

 

if acpi-apic selected, it will still work, dont worry, it is like a fail safe valve...

[speedooo]

just found this thread, could you have a look my problem, MC?

 

http://forum.insanelymac.com/index.php?showtopic=137001

 

thanks,

 

basically is sleep issue after update 10.5.5.