badkidforum Posted September 26, 2008 Share Posted September 26, 2008 No problem. Myscticus C*. my eyelids are also askin for a store closed permission .. gud nite everyone. can wait till morning .. no big deal ... Link to comment Share on other sites More sharing options...
benzy_d Posted September 26, 2008 Share Posted September 26, 2008 first of all, thx for the fast pm. I'm trying to install the update right now but i keep getting the same error message failed to read runatstartup script" is there a solution for this? I've looked on google but i can't see any solution for this problem. Thx in advance Link to comment Share on other sites More sharing options...
Sand Pirate Posted September 26, 2008 Share Posted September 26, 2008 I could sure use the links too! Thanks! Link to comment Share on other sites More sharing options...
alfkhr Posted September 26, 2008 Share Posted September 26, 2008 First of all thank you for tyour time and effort. I installed the update without any problem on my desktop HP dx2290. I only have a small problem with the screen resolution. It give ONE choise only (1024x768). but the CI/QE are OK. I tried to go back to old kext from 10.5.4 (which was work perfect) but I got this: Resolution issue solved but without CI/QE? Any help ?? the VGA card is GMA950 Link to comment Share on other sites More sharing options...
bl003r Posted September 27, 2008 Share Posted September 27, 2008 I've got ethernet now working with a kext that was emailed to me from a member here. Still unsure why his backed up IONetworkingFamily.kext works and my working backed up kext didn't work but when I get a chance I'll have a look for differences. Thanks again to Mysticus for the idiot proof patcher. Link to comment Share on other sites More sharing options...
Mike2732 Posted September 27, 2008 Share Posted September 27, 2008 Mysticus please send me DL links Thanks Link to comment Share on other sites More sharing options...
xdigital Posted September 27, 2008 Share Posted September 27, 2008 Mysticus, your box is full Could I have the link please? Thank you Link to comment Share on other sites More sharing options...
ASA666 Posted September 27, 2008 Share Posted September 27, 2008 Hi all, Could someone please PM me a link to the updates, too? Thanks VERY much! .ASA. Link to comment Share on other sites More sharing options...
Mysticus C* Posted September 27, 2008 Author Share Posted September 27, 2008 I've got ethernet now working with a kext that was emailed to me from a member here. Still unsure why his backed up IONetworkingFamily.kext works and my working backed up kext didn't work but when I get a chance I'll have a look for differences. Thanks again to Mysticus for the idiot proof patcher. please provide the link (either upload it somewhere and post the link on topic or PM me) and i can add it to the updater... i dont know why yours is not working either... Link to comment Share on other sites More sharing options...
toloot Posted September 27, 2008 Share Posted September 27, 2008 I ran step 1:Pre-install [No restart], followed by step 2: Official 10.5.5 update. Step 2 did not complete when i got the "Press the power button to restart". Anyone else having this problem? BTW, I have attached my install and system logs. Hopefully, we can identify the problem. In the meantime, i will restore from my backup and try again. I hope posting log files are legal on this forum. Thanks in advance logs.rar Link to comment Share on other sites More sharing options...
littlestevie Posted September 27, 2008 Share Posted September 27, 2008 i have a small question, is there any reasoning to 9.4.0 xnu being used vs the 9.5.0 voodoo kernel? Link to comment Share on other sites More sharing options...
kitopa Posted September 27, 2008 Share Posted September 27, 2008 Nice job Can someone send me the link please?! Greetz Link to comment Share on other sites More sharing options...
xxDriveNxx Posted September 27, 2008 Share Posted September 27, 2008 Does anyone have confirmation that this does or does not work with 10.5.5 Server combo updater? Link to comment Share on other sites More sharing options...
toloot Posted September 27, 2008 Share Posted September 27, 2008 More bad news. I tried updating from 10.5.1 (iATKOSi1.0r3) straight to 10.5.5, following step 1:Pre-install [No restart], followed by step 2: Official 10.5.5 update, but i get a freeze while running the 10.5.5 update (freeze @ 35% progress). No message, just a total system freeze. I also tried this: I applied Kalyway 10.5.2 update to my 10.5.1 (iATKOSi1.0r3). Then I restarted. Then I tried to apply the 10.5.5 update by following step 1:Pre-install [No restart], followed by step 2: Official 10.5.5 update. Same thing as before, the system freezes totally - this time the progress bar is at 50%. Anyone else seeing the problem or how to begin finding the problem? Thanks in advance Link to comment Share on other sites More sharing options...
Onixs Posted September 27, 2008 Share Posted September 27, 2008 Mysticus: Just want to clarify one thing... ----USB 2 controller fix: (aka pcgenusbehci) this is the latest version of the patch that works well for most cases. This version however uses original naming (AppleUSBEHCI.kext instead of PCGenUSBEHCI.kext in plugins folder) Can i just get the AppleUSBEHCI.kext from your package (not including the whole IOUSBFamily.kext), and just replace/overwrite it on my existing system (10.5.5) inside the plugin of my IOUSBFamily.kext? Link to comment Share on other sites More sharing options...
badkidforum Posted September 27, 2008 Share Posted September 27, 2008 Myscticus C* help me over my scenario .... that keyboard n USB Sound card mismatch .... I posted it last night then u wer feeling sleepy ... counting on u.. Link to comment Share on other sites More sharing options...
nickw Posted September 27, 2008 Share Posted September 27, 2008 I wonder why the driver of Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller doesn't work after updating my system to 10.5.5 and the backup file doesn't work either ~~ now I can not use my network, and this bothers me !!! Please give me some advices and help me !!!! Link to comment Share on other sites More sharing options...
MysticWizard Posted September 27, 2008 Share Posted September 27, 2008 Hi all, can anyone PM me the links to the update files? I tried sending a PM to mysticus but when I look in send messages it is empty many thanks for your help Link to comment Share on other sites More sharing options...
Mysticus C* Posted September 27, 2008 Author Share Posted September 27, 2008 i replied to all PM request.... so it should be good now... i will wrap up the latest revision as soon as i get some files from others for the 88e8039 network issue... Link to comment Share on other sites More sharing options...
Diegolocoloco Posted September 27, 2008 Share Posted September 27, 2008 Dear Mysticus The link 1) Download Pre Update and Post Update patch from Bike Town is not work ! Please send me a good link Thanks Diegolocoloco Link to comment Share on other sites More sharing options...
Dreamland69 Posted September 27, 2008 Share Posted September 27, 2008 Thanks Mysticus C* updated from Leo4All V 3.0 to 10.5.5 worked ps2 fix lost my audio ALC882 network (ethernet) in system preferences shows "not conected" - still working Kernel StageXNU 9.4. Link to comment Share on other sites More sharing options...
Bram1982 Posted September 27, 2008 Share Posted September 27, 2008 Hi All, I'd really like the link to the patch files too. Anyone? Thnx! Link to comment Share on other sites More sharing options...
Rocco Posted September 27, 2008 Share Posted September 27, 2008 Can some one send me the link? I use boot 132 and i just updated to 10.5.5 with apple update and know i cant boot i need new kext is there anyway someone could send me your modifyed kext for GA-EX38-DQ6 or if anyone have any other ideas that might help. Link to comment Share on other sites More sharing options...
Mysticus C* Posted September 27, 2008 Author Share Posted September 27, 2008 I hate to say that but some of you are really stupid... people who are asking for links, ever read the first post? dont just frigging jump to last page! bloor and/or firstcolle: please upload the ionetworkingfamily.kext of yours that are working, to somewhere like www.mediafire.com or similar, and give me the link, i asked both of you to upload it and give me the link, and both of you are asking me emails... and didnt receive nothing the whole day, is it not clear what i request/say? if u re not sending me the link, i will not be adding that to the patch and people will be asking and complaining for the network issue on your particular network cards... Link to comment Share on other sites More sharing options...
weekender Posted September 27, 2008 Share Posted September 27, 2008 I ran step 1:Pre-install [No restart], followed by step 2: Official 10.5.5 update. Step 2 did not complete when i got the "Press the power button to restart". Anyone else having this problem? BTW, I have attached my install and system logs. Hopefully, we can identify the problem. In the meantime, i will restore from my backup and try again. I hope posting log files are legal on this forum. Thanks in advance I have the exact same problem. I did a clean install of Kalyway 10.5.2. Installed the "Prepare for Combo Update". Didn't restart. Then ran the 10.5.5 combo update and got a panic at around 80% of the install. Link to comment Share on other sites More sharing options...
Recommended Posts