Mysticus C* Posted August 28, 2008 Author Share Posted August 28, 2008 After i have installed the 1.4b patch, system don't boot...-v, -x, -s don't work! Can i replace new kernel 9.3.0 with old kernel? Provide your hardware details, how should we know what you have? God knows you may be trying to install it on a Palm Treo Vlada: Good luck with your system... and pls do not post any link in public, i dont wanna have problems with mods... Link to comment Share on other sites More sharing options...
padremayi Posted August 28, 2008 Share Posted August 28, 2008 Provide your hardware details, how should we know what you have? God knows you may be trying to install it on a Palm Treo Vlada: Good luck with your system... and pls do not post any link in public, i dont wanna have problems with mods... Sorry, hers is my PC configuration: ASUS P5KC CHIPSET INTEL P35/ICH9 (NOT R) INTEL CORE 2 DUO E4500 NVIDIA GEFORCE 8800 GT 512 MB MAXTOR SATA HD I have installed KALYWAY 10.5.2 and work great. After I have used your update patch, system won't boot. I have tried -v, -s, -x or combination of them. System freeze on apple with ban or with -v option with Still waiting for root device error. Sorry for my english Link to comment Share on other sites More sharing options...
le.thomas Posted August 28, 2008 Share Posted August 28, 2008 Thank you for your fast reply. I found the backed up IONetworkingFamily.kext, but I don't know how to repair the permissions. Would you please tell me how to do this, mention "the three command lines", or is there an "How to" on the web? Link to comment Share on other sites More sharing options...
le.thomas Posted August 28, 2008 Share Posted August 28, 2008 Oke I found a solution for my problem, thank you for your great update pack! Link to comment Share on other sites More sharing options...
dsc Posted August 28, 2008 Share Posted August 28, 2008 I'm still running 10.5.2 so would I need to update to 10.5.3 before going to 5.4? If anyone has update links could you send them to me. Thanks in advance. Link to comment Share on other sites More sharing options...
padremayi Posted August 28, 2008 Share Posted August 28, 2008 I'm still running 10.5.2 so would I need to update to 10.5.3 before going to 5.4? If anyone has update links could you send them to me. Thanks in advance. DON'T DO IT!! Link to comment Share on other sites More sharing options...
dsc Posted August 28, 2008 Share Posted August 28, 2008 Thanks for the link and the great update. everything works fine Link to comment Share on other sites More sharing options...
Mysticus C* Posted August 28, 2008 Author Share Posted August 28, 2008 Sorry, hers is my PC configuration: ASUS P5KC CHIPSET INTEL P35/ICH9 (NOT R) INTEL CORE 2 DUO E4500 NVIDIA GEFORCE 8800 GT 512 MB MAXTOR SATA HD I have installed KALYWAY 10.5.2 and work great. After I have used your update patch, system won't boot. I have tried -v, -s, -x or combination of them. System freeze on apple with ban or with -v option with Still waiting for root device error. Sorry for my english padremayi: still waiting for root device error, is indication of non recognized controller, since you are using sata hd, can you tell me if it is in Jmicron controller? or Intel's ich 9? most importantly, is your sata port set to IDE MODE? or AHCI MODE? Because AHCI mode is the one working... Link to comment Share on other sites More sharing options...
padremayi Posted August 28, 2008 Share Posted August 28, 2008 padremayi: still waiting for root device error, is indication of non recognized controller, since you are using sata hd, can you tell me if it is in Jmicron controller? or Intel's ich 9? most importantly, is your sata port set to IDE MODE? or AHCI MODE? Because AHCI mode is the one working... I can't set to AHCI mode, my motherboard doesn't supply it. See http://vip.asus.com/forum/view.aspx?id=200...SLanguage=en-us KALYWAY 10.5.2 work correctly but DOESN'T WORK AFTER UPDATE. Indeed iATKOS_4i doesn't install. I'm obliged to use 10.5.2? Sigh Link to comment Share on other sites More sharing options...
verdant Posted August 28, 2008 Share Posted August 28, 2008 I can't set to AHCI mode, my motherboard doesn't supply it.See http://vip.asus.com/forum/view.aspx?id=200...SLanguage=en-us KALYWAY 10.5.2 work correctly but DOESN'T WORK AFTER UPDATE. Indeed iATKOS_4i doesn't install. I'm obliged to use 10.5.2? Sigh Hi there, look at this thread for AppleIntelPIIXATA kext driver for Intel ICHx chipsets...... Link to comment Share on other sites More sharing options...
padremayi Posted August 28, 2008 Share Posted August 28, 2008 Hi there, look at this thread for AppleIntelPIIXATA kext driver for Intel ICHx chipsets...... Thanks, may I install this before the update? If I want to install directly 10.5.4 with iATKOS_4i DVD, is there a method that can I follow? Link to comment Share on other sites More sharing options...
verdant Posted August 28, 2008 Share Posted August 28, 2008 Thanks,may I install this before the update? If I want to install directly 10.5.4 with iATKOS_4i DVD, is there a method that can I follow? Check that it does works for you when using 10.5.2 first.........then apply the 10.5.3 update.....check for its continued presence in extensions or not........if not, re-install the AppleIntelPIIXATA kext after updating to 10.5.3.......ditto with the 10.5.4 update ......BTW are you using a SATA or PATA DVDRW? Link to comment Share on other sites More sharing options...
iMystic Posted September 1, 2008 Share Posted September 1, 2008 thanks a million, the update worked like a charm! My respect for this awesome update. All works, except for that darn ALC662 sound that simply won't work Link to comment Share on other sites More sharing options...
Mysticus C* Posted September 1, 2008 Author Share Posted September 1, 2008 thanks a million, the update worked like a charm! My respect for this awesome update. All works, except for that darn ALC662 sound that simply won't work there are couple of alc662 solutions, they are not 100% solution but they allow you to use back panel fully work! (no front panel i think, no mute, but volume control work and some cases volume control doesnt work but programs can change their own volume...) i will post details later, or in the next udpate... may have more driver packages in the next update, unless apple makes life harder this time... Link to comment Share on other sites More sharing options...
EnDoZe Posted September 3, 2008 Share Posted September 3, 2008 I can't thank you enough Mysticus. You got back with me pretty darn quick and it worked the very first try. Thanks to you I made it to 10.5.3 without any hitches. I have everything up and running 100% except my graphics card, but it hasn't work properly since first install of Leopard ;( It sees it as a 32mb graphics card and no QE or CI for me. I fix that and I'm finally done. Off to the forums... (By far the easiest and best written combo updater by the way!) Link to comment Share on other sites More sharing options...
Mysticus C* Posted September 3, 2008 Author Share Posted September 3, 2008 I can't thank you enough Mysticus. You got back with me pretty darn quick and it worked the very first try. Thanks to you I made it to 10.5.3 without any hitches. I have everything up and running 100% except my graphics card, but it hasn't work properly since first install of Leopard ;( It sees it as a 32mb graphics card and no QE or CI for me. I fix that and I'm finally done. Off to the forums... (By far the easiest and best written combo updater by the way!) Your welcome mate, glad it worked fine at first attempt on your system... I am guessing you have the right ingredient for your computer... Not many people have a very compatible mobo and/or component in their systems... Link to comment Share on other sites More sharing options...
padremayi Posted September 5, 2008 Share Posted September 5, 2008 BTW are you using a SATA or PATA DVDRW? SATA Link to comment Share on other sites More sharing options...
verdant Posted September 5, 2008 Share Posted September 5, 2008 SATA So have you managed to get it all running OK? Link to comment Share on other sites More sharing options...
memphisman Posted September 6, 2008 Share Posted September 6, 2008 New to the forum but i've already got the Kalyway 10.5.2 running. Awesome job to all who worked on this. I'd like to get the link to update to 10.5.3. I'm trying to get to 10.5.3 to do some iPhone development. I'm a WinPC guy typically and you've got to run the 10.5.3 to run the iPhone SDK. Thanks Link to comment Share on other sites More sharing options...
hallodri987 Posted September 7, 2008 Share Posted September 7, 2008 *edit* thank you for the link Update works well *edit* Link to comment Share on other sites More sharing options...
Mysticus C* Posted September 7, 2008 Author Share Posted September 7, 2008 hallodri987: read the first post carefully next time... it states how you can get it... Link to comment Share on other sites More sharing options...
Mysticus C* Posted September 8, 2008 Author Share Posted September 8, 2008 UPDATE NEWS: I made a small ppf, for Jas 10.5.4 to support nforce chipset to be recognized in boot process (install window already has nforce option, but without boot support, your hdds wont be recognized therefore cant install on them unless you use usb hdds ) here is the link if anyone with NFORCE chipset wanna try Jas 10.5.4 Link to comment Share on other sites More sharing options...
Vaina Mac Posted September 8, 2008 Share Posted September 8, 2008 I'm still running 10.5.2, how I can get the link to update to 10.5.3? Thanks! Link to comment Share on other sites More sharing options...
phazon42 Posted September 8, 2008 Share Posted September 8, 2008 Hello I would like the link please. It would be very much appreciated Link to comment Share on other sites More sharing options...
Anarks Posted September 8, 2008 Share Posted September 8, 2008 PM the link please. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts