Jump to content
12 posts in this topic

Recommended Posts

I have recently installed leo4all v3 on my laptop, by default the everything works except the sound(alc268) and the network (broadcom57xx ), it's strange since it sees the broadcom 802.11g wireless card ;) . i managed to make the sound work with Tortuga's ALC268_Installer2 .

The problem that i have is the broadcom57xx, i tryed this

http://forum.insanelymac.com/index.php?showtopic=24479

to make my network card work but it didn't worked . i connect to the internet threw a router(which is connected to a modem), might the router be the problem ?... how can i see if my network card is recognized ? if it is recognized and the internet wont work the the problem is the router(maybe) but i can tell you for sure that it works .

 

ok, i think i know my driver's id

 

82801H(ICH8 Family) PCI Express Port3

Device:82801H (ICH8 Family) PCI Express Port

info.uid:pci_8086_2843

info.vendor:Intel Corporation

-unknown(0x1713)

-info.uid:pci_14e4_1713

-info.vendor:Broadcom Corporation

-pci.product_id:5907 (0x1713)

-pci.subsys_product_id:310 (0x136)

-pci.subsys_vendor:Acer Incorporated [ALI]

-pci.subsys_vendor_id:4133 (0x1025)

-pci.vendor:Broadcom Corporation

-pci.vendor_id:5348 (0x14e4)

 

anyway, in case i have forgot something i posted some screenshots

post-225358-1212788884_thumb.pngpost-225358-1212788894_thumb.png

post-225358-1212788901_thumb.png

  • 6 months later...

l have an Acer Aspire 5315 using Leopard 10.5.4.(iATKOS 4i.iso) and Vista Ultimate

.In Vista under Device Manager it gives me an Atheros 5007EG but on another

hard Disk runing XP it displays Atheros 5006 so i did the following

 

1.Without installing Airport Update 2008-004 l use kext helper to install io80211family.kext (v.2.1.2)

2. After an restart l noticed that Airport turned on but yellow (No Network) I have tried at least 5

or 6 different versions of io80211family.kext but only version 2.1.2 loads properly and gives me

under System Profiler/Airport Card/ Airport Extreme (0x168c,0x428) and System Profiler/ Extensions

-AirPortAtheros v.3.1.5

-IO80211Family v.2.1.2

I noticed that the networkinterface.plist under /library/preferences/systemconfiguration is en1

If l delete all the mkext files and repair io80211family.kext permissions

(chmod -R 755 /system/library/extensions/io80211family.kext

chown -R root:wheel /system/extensions/io80211family.kext),

after the next restart the AirPortAtheros /IO80211Family are vanished!!!

3. So I tried the >-f< trick editing f to com.apple.boot.plist

from /Library /Preferences/SystemConfiguration/

as bellow

<key>Kernel</key>

<string>mach_kernel</string>

<key> Kernel Flags </key>

<string>-f</string>

4. Although it gave me kernel panic l rebooted as -v so l reboot again as root user

5.Then without Repair disk permission or repairing io80211family.kext permissions again or anything else

6.l started kismac went to preferences --> driver and add airport extreme passive mode --> Start scan

and after l see network detected, l close it .l went to the airport icon on the top right on my desktop

and my network was listed. I clicked on it

From System preferences/Network the Airport icon is green!!!!Surfing with safari the the wireless Lan LED is

always inactive like if it doesn't work?The only thing thats annoying is that l have to always start kismac.

IO80211Family_kext_v.2.1.2.zip

Atheros_5007EG_proof.zip

  • 5 months later...

"i managed to make the sound work with Tortuga's ALC268_Installer2 ."

I have the same laptop and the same problems.

Can you help me with an how-to for the sound problem?

What I have to do to resolve the problem with sound?

THANKS A LOT!

 

I have recently installed leo4all v3 on my laptop, by default the everything works except the sound(alc268) and the network (broadcom57xx ), it's strange since it sees the broadcom 802.11g wireless card :| . i managed to make the sound work with Tortuga's ALC268_Installer2 .

The problem that i have is the broadcom57xx, i tryed this

http://forum.insanelymac.com/index.php?showtopic=24479

to make my network card work but it didn't worked . i connect to the internet threw a router(which is connected to a modem), might the router be the problem ?... how can i see if my network card is recognized ? if it is recognized and the internet wont work the the problem is the router(maybe) but i can tell you for sure that it works .

 

ok, i think i know my driver's id

 

 

 

anyway, in case i have forgot something i posted some screenshots

post-225358-1212788884_thumb.pngpost-225358-1212788894_thumb.png

"i managed to make the sound work with Tortuga's ALC268_Installer2 ."

I have the same laptop and the same problems.

Can you help me with an how-to for the sound problem?

What I have to do to resolve the problem with sound?

THANKS A LOT!

l have an Acer Aspire 5315 using Leopard 10.5.4.(iATKOS 4i.iso) and Vista Ultimate

.In Vista under Device Manager it gives me an Atheros 5007EG but on another

hard Disk runing XP it displays Atheros 5006 so i did the following

 

1.Without installing Airport Update 2008-004 l use kext helper to install io80211family.kext (v.2.1.2)

2. After an restart l noticed that Airport turned on but yellow (No Network) I have tried at least 5

or 6 different versions of io80211family.kext but only version 2.1.2 loads properly and gives me

under System Profiler/Airport Card/ Airport Extreme (0x168c,0x428) and System Profiler/ Extensions

-AirPortAtheros v.3.1.5

-IO80211Family v.2.1.2

I noticed that the networkinterface.plist under /library/preferences/systemconfiguration is en1

If l delete all the mkext files and repair io80211family.kext permissions

(chmod -R 755 /system/library/extensions/io80211family.kext

chown -R root:wheel /system/extensions/io80211family.kext),

after the next restart the AirPortAtheros /IO80211Family are vanished!!!

3. So I tried the >-f< trick editing f to com.apple.boot.plist

from /Library /Preferences/SystemConfiguration/

as bellow

<key>Kernel</key>

<string>mach_kernel</string>

<key> Kernel Flags </key>

<string>-f</string>

4. Although it gave me kernel panic l rebooted as -v so l reboot again as root user

5.Then without Repair disk permission or repairing io80211family.kext permissions again or anything else

6.l started kismac went to preferences --> driver and add airport extreme passive mode --> Start scan

and after l see network detected, l close it .l went to the airport icon on the top right on my desktop

and my network was listed. I clicked on it

From System preferences/Network the Airport icon is green!!!!Surfing with safari the the wireless Lan LED is

always inactive like if it doesn't work?The only thing thats annoying is that l have to always start kismac.

I installed Kismac but i can't see Preferences Window...Why????

Thanks

×
×
  • Create New...