Jump to content

ATI Radeon HD pkg installers 10.5.x & 10.6

lastExile

By lastExile,
in ATi

 Share
2,380 posts in this topic

Recommended Posts

lastExile
lastExile
Posted
  • Author
Posted
no, it is from the post of jul 2

should i give the new ones a try and where can i find them? did not see them before...

 

EDIT:

 

found it on first post, giving it a try right now....

 

 

try the one on the top of the page with Eps natit

Link to comment
Share on other sites
FadeFX
FadeFX
Posted
Posted

ok, installed driver and after reboot nothing worked anymore, had on the first display a black screen with strange artefacts and on the second screen a black screen with colored stripes... is it possible that this happend because i installed the older drivers first?

 

i did now a clean install again with 1024x768 only but at least it clones the 2 screens. dual monitor is not possible.

Link to comment
Share on other sites
mr_Harry_plotter_hk
mr_Harry_plotter_hk
Posted
Posted

Dear LastExile;

 

Thanks for your advise. I've re-install the Ideneb 10.5.4 uisng no Video Kext in the DVD and boot with -x option.

System started up in safe-mode. Then I installed the HD 2600XT PCIe Kert using Pacifist. Everything works as dream. YOU ARE MY HERO.

 

Thanks a lot ,buddy.

 

_____________________________________________________

 

ATI Radeon HD 2600 XT:

 

Chipset Model: ATI Radeon HD 2600

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9588

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

CP323BAA:

Resolution: 1280 x 1024 @ 75 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Display Connector:

Status: No display connected

Link to comment
Share on other sites
Eps
Eps
Posted
Posted
ok, installed driver and after reboot nothing worked anymore, had on the first display a black screen with strange artefacts and on the second screen a black screen with colored stripes... is it possible that this happend because i installed the older drivers first?

 

i did now a clean install again with 1024x768 only but at least it clones the 2 screens. dual monitor is not possible.

 

 

My 3650 have worked without any patch.

But I think someone may need this kext to get it work.

Download this kext.

Get in safe mode and install this may get your framebuffer work.

 

ATINDRV.kext.zip

Link to comment
Share on other sites
BaBiZ
BaBiZ
Posted
Posted

Thank you, my HD 2600 Pro works perfect.

I used the ATI Radeon HD 2600 Pro AGP driver, the only thing I had to do is to add my card's revision to the Info.plist file

 

thank you again!

Link to comment
Share on other sites
sch8mid
sch8mid
Posted
Posted
XBENCH Values , also the Quartz+OpenGL are very CPU / L2 Cache dependend!

And it doenst matter at which ersolution you run XBENCH (that the bad thing for OpenGL benches), because XBENCH always uses

a way to small window for 2D/3D benches.

 

You can compare those only if you have near same CPU.

With same GPU, for example ATI 3850 you can get complete different values running one 3850 with INtel E2160 and the other with Intel Quad CPU!

 

mitch is right on this

 

and it depends even on the Intel Quad CPU type and even on the stepping !

 

look @ this :

 

He got :

 

7306 with a Quad Q 6600 CPU @ 3,62 GHz (he will get about 7900 with 64 bit )

 

 

here:

 

7520 with a Quad Q 9550 CPU @ 3,00 Ghz

 

http://browse.geekbench.ca/geekbench2/view/80086

 

 

OC a Q 9550 to the same clock as above and you will see 9000 scores in geekbench

 

best

 

m

Link to comment
Share on other sites
mattlqx
mattlqx
Posted
Posted

I had no love with the 'new' modified Eps 3650 installer. Kept getting black and white checkerboard screen.

 

Used the 'old' 3650 installer and it works with full res and QE + acceleration.

 

I'm using JaS 10.5.4 + 10.5.5 update. The HD3650 driver that came on it had full res but QE was unsupported and screen savers in System Prefs would crash as soon as you clicked on one.

 

This is my card:

 

Chipset Model: ATI Radeon HD 3600

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9598

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Link to comment
Share on other sites
lastExile
lastExile
Posted
  • Author
Posted
I had no love with the 'new' modified Eps 3650 installer. Kept getting black and white checkerboard screen.

 

Used the 'old' 3650 installer and it works with full res and QE + acceleration.

 

I'm using JaS 10.5.4 + 10.5.5 update. The HD3650 driver that came on it had full res but QE was unsupported and screen savers in System Prefs would crash as soon as you clicked on one.

 

This is my card:

 

Chipset Model: ATI Radeon HD 3600

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9598

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

 

will fix that in a few see if we can solve this :(

Link to comment
Share on other sites
FadeFX
FadeFX
Posted
Posted
I had no love with the 'new' modified Eps 3650 installer. Kept getting black and white checkerboard screen.

 

Used the 'old' 3650 installer and it works with full res and QE + acceleration.

 

I'm using JaS 10.5.4 + 10.5.5 update. The HD3650 driver that came on it had full res but QE was unsupported and screen savers in System Prefs would crash as soon as you clicked on one.

 

This is my card:

 

Chipset Model: ATI Radeon HD 3600

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9598

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

 

looks like i am expeiencing the same troubles with this driver. the old one worked but dual screen is not working...

Link to comment
Share on other sites
FadeFX
FadeFX
Posted
Posted

hehe, sorry, but today after an update to 10.5.5 (Mysticus´s method with apples comboupdate and two scripts) and a lot of fidling arround in the extensions folder i finally got it working with the old driver pack. have no possibility to test dvi before monday, but finally i am happy with this setup atm!

 

actually i removed all ati kexts from the folder and installed the old driver pack from this post:

http://forum.insanelymac.com/index.php?s=&...st&p=767227

 

now everything runing fine!!

 

thanx a lot LastExile!!!!

Link to comment
Share on other sites
macoff
macoff
Posted
Posted

Ok LastExile, I've tried Megalodon and has proved better, could guide me to the next step?

post-169936-1224342457_thumb.png

Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Starting.
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: device-id: 0x95C4
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Found device
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Found device name
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,PlatformInfo=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFICompileDate=Dec 18 2007
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIEnabledMode=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,Copyright=Copyright AMD Inc. All Rights Reserved. 2005-2008
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-connect-flags=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIHWInitStatus=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,IOSpaceOffset=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MCLK=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,Rom#=113-B1480A-236
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,ATY,EFIDisplay=TMDSA
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIDriverType=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting model=ATI Radeon HD 3470 Mobility
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting MVAD=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,device_type=display
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-type=NONE
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL01,blackscreen-preferences=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL00,blackscreen-preferences=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL,backlight-control=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,RegisterSpaceOffset=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-type=LCD
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting name=ATY,MegalodonParent
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL,aux-power-connected=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,FrameBufferOffset=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MemVendorID=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MemRevisionID=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,connector-type=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIOrientation=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,VRAM,memsize=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL,EMC-Display-List=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MRT=
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,compatible=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,RefCLK=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,name=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL01,Coherency=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,SCLK=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,AAPL,boot-display=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,name=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,compatible=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,Card#=109-B148xx-00
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,HWGPIO=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,PCIConfigSpace=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,connector-type=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,device_type=display
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIVersionBios=113-B14801-023
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIVersion=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting device_type=ATY,MegalodonParent
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,VRAM,memsize=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,VendorID=<data not shown>

Greetings, MacOff

Link to comment
Share on other sites
lastExile
lastExile
Posted
  • Author
Posted
Ok LastExile, I've tried Megalodon and has proved better, could guide me to the next step?

post-169936-1224342457_thumb.png

Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Starting.
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: device-id: 0x95C4
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Found device
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Found device name
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,PlatformInfo=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFICompileDate=Dec 18 2007
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIEnabledMode=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,Copyright=Copyright AMD Inc. All Rights Reserved. 2005-2008
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-connect-flags=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIHWInitStatus=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,IOSpaceOffset=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MCLK=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,Rom#=113-B1480A-236
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,ATY,EFIDisplay=TMDSA
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIDriverType=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting model=ATI Radeon HD 3470 Mobility
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting MVAD=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,device_type=display
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-type=NONE
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL01,blackscreen-preferences=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL00,blackscreen-preferences=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL,backlight-control=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,RegisterSpaceOffset=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-type=LCD
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting name=ATY,MegalodonParent
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL,aux-power-connected=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,FrameBufferOffset=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MemVendorID=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MemRevisionID=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,connector-type=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIOrientation=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,VRAM,memsize=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL,EMC-Display-List=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,MRT=
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,compatible=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,RefCLK=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,name=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting AAPL01,Coherency=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,SCLK=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,AAPL,boot-display=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,name=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,compatible=ATY,Megalodon
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,Card#=109-B148xx-00
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,HWGPIO=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,PCIConfigSpace=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,connector-type=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,device_type=display
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIVersionBios=113-B14801-023
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,EFIVersion=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting device_type=ATY,MegalodonParent
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,VRAM,memsize=<data not shown>
Oct 18 16:50:51 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,VendorID=<data not shown>

Greetings, MacOff

 

no higher resolution ?

Link to comment
Share on other sites
Attack Monkey
Attack Monkey
Posted
Posted

I also have an Asus EAH3650 512mb Silentmagic on Leo4Allv3. I tried the "new" (Oct 18th) pkg installer and installed without problem, I restarted and it recognizes my monitor (Acer Flat Panel) and it recognizes the "Panasonic_TV" (each plugged into one of the DVI outputs with Acer connected by DVI to VGA and Panasonic by DVI to HDMI) but won't put anything up on the panasonic tv no matter what I try (Mirror, non-mirror, change resolutions, etc. The Acer seems to work fine... Thoughts?

Link to comment
Share on other sites
FadeFX
FadeFX
Posted
Posted
I also have an Asus EAH3650 512mb Silentmagic on Leo4Allv3. I tried the "new" (Oct 18th) pkg installer and installed without problem, I restarted and it recognizes my monitor (Acer Flat Panel) and it recognizes the "Panasonic_TV" (each plugged into one of the DVI outputs with Acer connected by DVI to VGA and Panasonic by DVI to HDMI) but won't put anything up on the panasonic tv no matter what I try (Mirror, non-mirror, change resolutions, etc. The Acer seems to work fine... Thoughts?

 

had same problem yesterday, but after installing the apple combo update and fiddling arround with the drivers a lot ( http://forum.insanelymac.com/index.php?sho...526&st=660# ) i got output on both screens finally.

 

 

LastExile

 

do you think it is possible somehow to get signal on the svideo out also??

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...