Jump to content

ATI Radeon HD pkg installers 10.5.x & 10.6

lastExile

By lastExile,
in ATi

 Share
2,380 posts in this topic

Recommended Posts

Mohammadkoush
Mohammadkoush
Posted
Posted

please to lastexile

 

the driver for the 3850 hd agp ati 512 gddr 3 with at the main page is displayed with the wrong device id, where it is stated to be 9515, and the id of it is 9505, and in page 31 i did post that it did not work for me (the driver)please read that post, and help out us out who is having the same problem.

 

nb: i am in #RadeonHD if you like me to test things thank you

Link to comment
Share on other sites
Mohammadkoush
Mohammadkoush
Posted
Posted
Try the ati radeon 3650 installer and give thanks to Eps also report back !!! Kthx

made some jackass thing but its fixed now

ok i have installed this driver and i rebooted, usualy if its broken it would not boot , but this one did boot...;)

i looked in the display settings it is still one resolution 1024x786, and in the profiler it say no ci/qe

so i would say it is 50% there booted fine, still need to have it running hummmf... and thanx for the help for every one lastexile, eps, jas, natit....and any one else on this project

Link to comment
Share on other sites
lastExile
lastExile
Posted
  • Author
Posted
When installing all of this, can I treat the Radeon HD 3650 the same as the Mobility Radeon HD 3650? Or are they two completely different stories when getting OSX on my PC?

 

 

2 different things

Link to comment
Share on other sites
Eps
Eps
Posted
Posted
ok i have installed this driver and i rebooted, usualy if its broken it would not boot , but this one did boot...:)

i looked in the display settings it is still one resolution 1024x786, and in the profiler it say no ci/qe

so i would say it is 50% there booted fine, still need to have it running hummmf... and thanx for the help for every one lastexile, eps, jas, natit....and any one else on this project

 

 

It seem that kexts are not loaded.

Link to comment
Share on other sites
macoff
macoff
Posted
Posted

I have tried Natit from Eps and adding the ID of my HD3470 Mobility in ATIRadeonX2000.kext, and i got a beautiful multicolor display. :)

Still waiting...

Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Starting.
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: device-id: 0x95C4
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-link-component-bits=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-link-component-bits=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,compatible=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,name=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-connect-flags=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,name=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,compatible=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,connector-type=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,device_type=display
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,device_type=display
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-connect-flags=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting device_type=ATY,AlopiasParent
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,VRAM,MemSize=0x00000200
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,FrameBufferOffset=0x00000200
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,connector-type=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting model=ATI unknown card

Greetings, MacOff

Link to comment
Share on other sites
scottishduck
scottishduck
Posted
Posted
I have tried Natit from Eps and adding the ID of my HD3470 Mobility in ATIRadeonX2000.kext, and i got a beautiful multicolor display. :D

Still waiting...

Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Starting.
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: device-id: 0x95C4
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-link-component-bits=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-link-component-bits=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,compatible=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,name=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-connect-flags=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,name=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,compatible=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,connector-type=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,device_type=display
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,device_type=display
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-connect-flags=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting device_type=ATY,AlopiasParent
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,VRAM,MemSize=0x00000200
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,FrameBufferOffset=0x00000200
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,connector-type=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting model=ATI unknown card

Greetings, MacOff

 

Do you know how i could mod the driver for mobility 3650? This may be my chance to get it finally working.

Link to comment
Share on other sites
pepsitwist
pepsitwist
Posted
Posted

um... yeah. weird problem

 

when booting i get the blue screen. if press the power button on my pc it goes into sleep. JUST before going to sleep it displays the desktop normally... after recovering from sleep, it continues ok.

 

what the hell is going on?

Link to comment
Share on other sites
drumthrasher109
drumthrasher109
Posted
Posted

LASTEXILE!!! IT FINALLY WORKS! 1 YEAR LATER IT WORKS! THANK YOU MAN! Even my HDTV connected via s-video works too!!!

 

ATI Radeon HD 2600 XT:

 

Chipset Model: ATI Radeon HD 2600

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9589

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

FPD1960:

Resolution: 1280 x 1024 @ 75 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Television:

Resolution: 800 x 600 @ 60 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Television: Yes

Link to comment
Share on other sites
lastExile
lastExile
Posted
  • Author
Posted
LASTEXILE!!! IT FINALLY WORKS! 1 YEAR LATER IT WORKS! THANK YOU MAN! Even my HDTV connected via s-video works too!!!

 

ATI Radeon HD 2600 XT:

 

Chipset Model: ATI Radeon HD 2600

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9589

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

FPD1960:

Resolution: 1280 x 1024 @ 75 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Television:

Resolution: 800 x 600 @ 60 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Television: Yes

 

So it finally works which one did you try the AMD version ? and congrats hope you enjoy it now hehe hmm S-Video now thats new to me well i might forgotten the support but so it works ?

 

 

I have tried Natit from Eps and adding the ID of my HD3470 Mobility in ATIRadeonX2000.kext, and i got a beautiful multicolor display. :wacko:

Still waiting...

Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Starting.
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: device-id: 0x95C4
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-link-component-bits=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-link-component-bits=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,compatible=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,name=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,display-connect-flags=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,name=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,compatible=ATY,Alopias
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,connector-type=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,device_type=display
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @0,device_type=display
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,display-connect-flags=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting device_type=ATY,AlopiasParent
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,VRAM,MemSize=0x00000200
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting ATY,FrameBufferOffset=0x00000200
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting @1,connector-type=<data not shown>
Oct 16 18:41:37 macoffs-vgn-fw11e kernel[0]: Natit: Setting model=ATI unknown card

Greetings, MacOff

 

wrong framebuffer

Link to comment
Share on other sites
lastExile
lastExile
Posted
  • Author
Posted

so here are the latest things that is in the kexts for now ( not working yet still working on it )

 

ATI Radeon HD 4550

ATI Radeon RV710 Prototype OpenGL Engine

 

ATI Radeon HD 4670 & 4650

ATI Radeon RV730 Prototype OpenGL Engine

 

ATI Radeon HD 4850 & 4870 (Maybe X2)

ATI Radeon RV770 Prototype OpenGL Engine

 

and

 

ATI Radeon HD 4xxx

ATI Radeon RV7XX Prototype OpenGL Engine

Link to comment
Share on other sites
mr_Harry_plotter_hk
mr_Harry_plotter_hk
Posted
Posted

Dear all;

 

I have the display card :.Powercolour HD2600 XT 512 M DDR3 ID:95881002. I tried using Leo4allv3,Ideneb 10.5.4 and Ideneb 10.5.5 and selected the HD ATI drivers in DVDs. ( for HD2600XT )

 

Installation completed. but when it goes re-start ( last step in installation )..Screen was blacken out ( actually heap of color pixels on screen), display goes no response,, but I see my hard disk is running ..What should I do next ?

 

My config:

 

GIgabyte: GA-EG31M-S2 (rev. 2.0)

Memory: 2GB DDR2-800

Display; Powercolor HD 2600 XT DDR3 512M

Harddisk; Seagate SATA 120GB

ASUS DVDRW SATA_1

 

( This set up works in Window vista, so there should not have Hardwares problem )

 

Last night, I tried a clean installation using ideneb 10.5.4. I connected my LCD display which both VGA and DVI inputs to the corresponding on-broad VGA ( Gigabyte MB) and my Powercolor HD 2600 XT (512MB DDR3) grahic card.

 

Using VGA port to monitor the installation, I found everything goes fine and then I installed the ATI HD 2600XT kert ( from http://rapidshare.com/files/146670541/ATI_...kexts.zip.html) and then restart the system. Choose the DVI port in my display LCD. No luck, BSOD. Then, switched back using VGA port. and checked for Display setting.

 

Found: HD 2600 XT ( installed ) with correct dev id and vendor id: 95881002 ( but VRAM was not correct, only shown as 256 Mb instead of 512 MB )

 

Isn't it the problem is in 512MB VRAM or others...

 

Any suggestion ?

Link to comment
Share on other sites
lastExile
lastExile
Posted
  • Author
Posted
Dear all;

 

I have the display card :.Powercolour HD2600 XT 512 M DDR3 ID:95881002. I tried using Leo4allv3,Ideneb 10.5.4 and Ideneb 10.5.5 and selected the HD ATI drivers in DVDs. ( for HD2600XT )

 

Installation completed. but when it goes re-start ( last step in installation )..Screen was blacken out ( actually heap of color pixels on screen), display goes no response,, but I see my hard disk is running ..What should I do next ?

 

My config:

 

GIgabyte: GA-EG31M-S2 (rev. 2.0)

Memory: 2GB DDR2-800

Display; Powercolor HD 2600 XT DDR3 512M

Harddisk; Seagate SATA 120GB

ASUS DVDRW SATA_1

 

( This set up works in Window vista, so there should not have Hardwares problem )

 

Last night, I tried a clean installation using ideneb 10.5.4. I connected my LCD display which both VGA and DVI inputs to the corresponding on-broad VGA ( Gigabyte MB) and my Powercolor HD 2600 XT (512MB DDR3) grahic card.

 

Using VGA port to monitor the installation, I found everything goes fine and then I installed the ATI HD 2600XT kert ( from http://rapidshare.com/files/146670541/ATI_...kexts.zip.html) and then restart the system. Choose the DVI port in my display LCD. No luck, BSOD. Then, switched back using VGA port. and checked for Display setting.

 

Found: HD 2600 XT ( installed ) with correct dev id and vendor id: 95881002 ( but VRAM was not correct, only shown as 256 Mb instead of 512 MB )

 

Isn't it the problem is in 512MB VRAM or others...

 

Any suggestion ?

 

install without selecting the kexts in the installer of the DVD then install this or boot with -x if you get a screen that has dots you need to boot with -x

Link to comment
Share on other sites
Badeendje
Badeendje
Posted
Posted
ATI Radeon HD 4670 & 4650

ATI Radeon RV730 Prototype OpenGL Engine

 

 

You would make me so happy with this one :rolleyes:

I can test it in about 2/3 weeks when I build my new hack mini pro :)

The 4670 that is, chosen this one for the job;

 

http://www.sapphiretech.com/us/products/pr...d=253&grp=3

 

It's blue and has dual dvi which I need, plus has no power plug on the pcb which is mandatory for this barebone.

Link to comment
Share on other sites
FadeFX
FadeFX
Posted
Posted

Hi LastExile

 

at first i have to thank you a lot for your work,

i have only one problem with my asus eah3650 512mb silentmagic on kalaway 10.5.2:

 

after a clean install of calaway i installed your driver for my card and everything works fine except the second monitor is detected by the os and configurable but the monitor will not come up (led blinks orange...

 

can anyone please give me some hints on how to change this?

 

nice greets fadefx

Link to comment
Share on other sites
lastExile
lastExile
Posted
  • Author
Posted
Hi LastExile

 

at first i have to thank you a lot for your work,

i have only one problem with my asus eah3650 512mb silentmagic on kalaway 10.5.2:

 

after a clean install of calaway i installed your driver for my card and everything works fine except the second monitor is detected by the os and configurable but the monitor will not come up (led blinks orange...

 

can anyone please give me some hints on how to change this?

 

nice greets fadefx

 

which one the one i posted yesterday with Eps Natit ?

Link to comment
Share on other sites
FadeFX
FadeFX
Posted
Posted

no, it is from the post of jul 2

Ohai

 

I need feedback on this installer for 2400,3850,3650 and 3870x2 users

 

Download

 

should i give the new ones a try and where can i find them? did not see them before...

 

EDIT:

 

found it on first post, giving it a try right now....

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...